I'm a beginning woodworker, and I've done this a few times, the upside is that you didn't pop a brad nail into your finger. Don't ask... lol A simple solution would be to glue a thin strip of veneer on both sides to give a nice accent or contrast if you want to keep the chest in natural wood. Otherwise a bit of paint will cover the mistakes with the wood filler. Looking good though.
@arayawoodworks
2 жыл бұрын
Haha I’ve been there for the Brad nail and finger connection 😂😂 Great point. Thank you for sharing a good solution
@flk3rd
10 ай бұрын
For the drawers I cut a rabbit on the fronts and backs and a dado on the sides. The dado is quarter inch inset if using half inch stock. Then the rabbit will fit the dado.
@versatileduplicity9313
2 жыл бұрын
Finally !!! Someone who builds drawers the right way !!! rabbit, grove, dado
@arayawoodworks
2 жыл бұрын
Thank you for watching!
@lakeshorewoodworks7786
3 жыл бұрын
To fix the side frame one option would be cut a 1/4” plywood panel to fit inside of the frames then trim it out with cove moulding
@arayawoodworks
2 жыл бұрын
Yes! Great suggestion. I like the addition of trim!
@dennisbeaver5958
Жыл бұрын
Very basic joinery should be easy for any beginner! Love the alder trim you added. Great accent!
Love the fact that you have not hidden your mistakes. You ended up with a good set of drawers. A project that I am in need of doing, so you have given me some ideas and tips. Thanks very much :)
@arayawoodworks
Жыл бұрын
Thank you for watching
@MrCbayboyz
Жыл бұрын
Love the look, can’t wait to. Build it for my kids. Thanks for the kids
@arayawoodworks
Жыл бұрын
Thank you for watching!
@johnford7847
Жыл бұрын
Nice piece. Practical, too. Thank you.
@arayawoodworks
Жыл бұрын
Glad you like it!
@wimm1392
2 жыл бұрын
This is just what I was looking for. Thanks very much Mr. Have a Good Day from Brisbane.🇦🇺
@arayawoodworks
2 жыл бұрын
Thank you for watching!
@edkowalski5597
Жыл бұрын
Great job. Awesome
@poncianovinas3512
Жыл бұрын
For me it's beautifuly crafted
@arayawoodworks
Жыл бұрын
Thank you for watching!
@holdemNE1
3 жыл бұрын
Very nice. I think I would have opted for 2 knobs per drawer instead of one center one but that's just my preference. Well done and enjoyable video. Thanks for posting.
@arayawoodworks
3 жыл бұрын
Hey Mike. Thanks for watching and adding your thoughts 😃
@donaldschlosser6964
Жыл бұрын
I use a dremal tool with a little cut off wheel then put plastic wood putty on sand it off paint
@arayawoodworks
Жыл бұрын
Great idea
@yukkmouf
5 ай бұрын
6:52 Eiiish! Want you to keep all your fingers my man!
@fjesusjr6875
2 жыл бұрын
Great explanation, thanks for the video
@arayawoodworks
2 жыл бұрын
Thank you for watching!
@flowgood123
11 ай бұрын
Grate job.
@craigsmith1018
5 ай бұрын
pura vida mae
@arayawoodworks
4 ай бұрын
PURA VIDA!
@To-Lo77
3 жыл бұрын
Thanks for the detailed video brutha. I’m looking to build own, 1st dresser. Many how to videos don’t explain much. You did a great job w/ details. 🤜 🤛
@arayawoodworks
3 жыл бұрын
Awesome! Thank. You for watching. Hope it helped
@thegoodfight365
2 жыл бұрын
Great job 👍🏿
@arayawoodworks
2 жыл бұрын
Thank you!!
@jcescobarbravo
2 жыл бұрын
thnks
@rcdogmanduh4440
Жыл бұрын
Oh dam lol paint!
@arayawoodworks
Жыл бұрын
lol that’s one option!
@lynjermey6423
3 жыл бұрын
Looked awesome. You could have glued quarter inch of ply over it.
@arayawoodworks
3 жыл бұрын
That is a great point and a great fix! Thank you for watching 😀
@johnjohnson9093
2 жыл бұрын
Nice work
@arayawoodworks
2 жыл бұрын
Thank you!!
@kathysaign2916
5 ай бұрын
Hello having trouble pulling plans for the tall dresser can you send or attach to comments?
@reubenca
6 ай бұрын
I watched your video and turned on the CC because I could not understand what type of nails that you were using. You say that you are using breath nails. What are breath nails?
@arayawoodworks
6 ай бұрын
lol. You shooting with your mouth. You should give it a try 😂 thank you for watching
@kenwickbutterfield5666
Жыл бұрын
You can just add 1/4" plywood panel to hide the nails
@arayawoodworks
Жыл бұрын
Great idea!
@paige3304
Жыл бұрын
I would counter sink the nails back and if the aren't sunk on the inside who cars...mistakes are made. It happens.
@arayawoodworks
Жыл бұрын
Indeed! They happened but never enjoy them 😂
@mrmyblessednest1722
2 жыл бұрын
Great build Alex! Curious where you buy your prefinished plywood for the drawer bottoms? I’ve made that same mistake with the length of Brad nails. Frustrating!
@arayawoodworks
2 жыл бұрын
Thank you for watching. I get them from my local hardwood dealer. I just ask for 1/4 with UV on one side.
@mrmyblessednest1722
2 жыл бұрын
@@arayawoodworks great thank you!! Subscribed to your channel and downloaded your pricing worksheet and the pst file that goes with the dresser! Have a great day! Happy new year!
@otahu26
Жыл бұрын
Great Design.. But why On earth is everything after the 1980's So shallow in the drawer.. Add a couple inch's so people can get more then 2 pairs of jeans in.
@arayawoodworks
Жыл бұрын
Haha actually the drawers fit lots of clothes! But you can certainly make them bigger
@jcescobarbravo
2 жыл бұрын
3:21 tiene ceja o desnivel?
@arayawoodworks
2 жыл бұрын
No. Esta bien nivelado
@ihaulscrap
2 жыл бұрын
Where did you get your apron?
@arayawoodworks
2 жыл бұрын
I got it from John Katz-Moses. It’s a great apron
@davidbishop723
Жыл бұрын
You can use 1/4 " luan to cover the pops.
@arayawoodworks
Жыл бұрын
Great idea!
@CAMEO1955
2 жыл бұрын
Nice build , Great Video How Too , Just found you to bad you stop ! New Sub if you come back T / C
@arayawoodworks
2 жыл бұрын
I will be posting again soon. Just trying to finish my master’s degree but definitely coming back!
Пікірлер: 64