Piaggio Zip Stage6 MK2 Racing 70cc yasuni c30 malossi mhr team 2 inner rotor Follow me on: Insta- / osczip Tiktok- www.tiktok.com... Facebook- / osczip
stage6 mk2 Racing 70cc air cooled, Yasuni C30 exhaust, stage6 RT oversize variator, frontface, belt and torque converter, malossi mhr team 2 inner rotor, 28mm PWK carburettor, stage6 drag air filter, jasil evo hi-tec crankshaft, malossi oversize small end bearing, malossi delta clutch with clutch bell (adjustable), stage6 hard/red clutch springs set to max setting on the clutch, polini 360 intake manifold with spacer, artek k1 reedblock with carbon fibre reed petals, stage6 CNC quick action throttle
@OscZip
2 жыл бұрын
thank you bro i appreciate that alot!!
@LS-BKLF
2 жыл бұрын
@@OscZip c30 on a fucking mk2???
@OscZip
2 жыл бұрын
@@LS-BKLF yeah mate 😃 air cooled. i can still get alot better results with some more tuning, i dont have a tachometer on there yet so dont know how far off i am with roller weights. torque spring needs to be stiffer too
@LS-BKLF
2 жыл бұрын
@@OscZip ah right i was just thinkin: a c16 would do fine on a mk2
@GREG_MOTO
2 жыл бұрын
Love the sound of a two stroke and ofcourse the power
@OscZip
2 жыл бұрын
❤️💯🔥🔥
@Miley-RayStewart
2 жыл бұрын
Is it just me or is it missing power when "clutched in"? When he is starting the scooter is rising rpm ultra-fast but the more speed he gets the less does the engine be willing to go on high rpm. Maybe try a different setup? I once made up a Gilera with a Stage 6 Racing Modular which reached Speeds of much over 130kmph and I had also had this problem when I was using too much fuel. I ended up in removing my 28cali to a 21 delorto which builded me much better performances. Maybe also try different weights so the scooter clutches and let's slide a bit more while clutching? It is a bit of time passed but I think I also ended up doing that when I have not found a weight that was oki for me. 6gramm were to heavy and I think I was ending with 5,5 or around that or mixed them up. Great work my dear. When I imagine how fast the DNA could be (even being known to have less power than the runner for example even when they claim it to be "same") and seeing how much less weight the Zip has. This must be hilariously fast haha
@OscZip
2 жыл бұрын
yes your right! check out my most recent vid. the cvt is basically perfect now, but has a splutter issue due to too much 2t. i had to fit a alot stiffer torque spring and changed roller weights too. completely different bike now
@OscZip
2 жыл бұрын
but thank you i really appreciate that!! 🙏💯❤️
@joerdanjesther7240
2 жыл бұрын
Wait a minute clutch?
@Miley-RayStewart
2 жыл бұрын
@@joerdanjesther7240 yes. I can not say it different I am not a professional i just have had thoughts that be doof
@OscZip
2 жыл бұрын
@@joerdanjesther7240 the automatic CVT has a clutch that works through centrifugal force. (closed at idle, once you throttle and bring revs up, 3 little clutch shoes held together by springs, slowly start flinging outwards, and once at a certain rpm, the shoes get flung so far out that they grip the clutch bell. and the clutch bell is connected directly onto the primary gear of the gearbox and thats how the engine engages/disengages. so stiffer clutch springs mean it takes alot more revs for the shoes to fling out
@scooterattack
2 жыл бұрын
S6 Racing is plenty powerful for the street and a joy for the whole neighbourhood! :D
@OscZip
2 жыл бұрын
Im doing it for them! 😂😂😉
@1000subspleaseno2
2 жыл бұрын
Shut your mouth this vehicle is dangerous and many people will get hurt
@summerlince-smith1659
2 жыл бұрын
Bloody hell that’s fast 🤬💨💨
@dennisekstrom1797
2 жыл бұрын
Its insane u can take any 125cc
@OscZip
2 жыл бұрын
watch me new videos bro! i just realised today ive had the rpm limiter set to 11.5k rpm and thats whats going on in my recent videos haha but im gonna change that asap and get a video of it running alot better 💨💨
@davesmith9503
2 жыл бұрын
Perfect setup been there years ago love seeing the 70kelits still a thing
@OscZip
2 жыл бұрын
thank you man!!! 🫡❤️🔥💨
@ultimategamer0505
Жыл бұрын
You should come to Greece then
@Erik-vq7zh
2 жыл бұрын
I would put the carb needle clip higher it runs a bit rich with half throttle
@OscZip
2 жыл бұрын
thanks mate, lift the needle then?
@Erik-vq7zh
2 жыл бұрын
@@OscZip no you have to put the needle clip a slot or 2 higher
@OscZip
2 жыл бұрын
@@Erik-vq7zh i seeee, ok ill do that then, will get another video soon with a few changes, hopefully alot better performance
@kachr21
2 жыл бұрын
I drive with stage 6 racing mk2 however with a r1400 exhaust 28mm pwk with 134 main jet my jet is a little too big needle setting nr1 (top) rollers are 4.0g to light but my counter spring 38kg it runs at 13500 rpm and throws 14.65 hp on the rear wheel
@OscZip
2 жыл бұрын
air cooled?? and how much too light are the 4g would you say?? and you think the c30 has a similar powerband to the r1400???
@kachr21
2 жыл бұрын
@@OscZip yes air cooled i have send my performance test to you on Facebook i Think i ned to skift to 4.3g rollers
@496RoxtuneR
2 жыл бұрын
Sounds okay nur is really to rich And the Rollers a Bit to heavy
@OscZip
2 жыл бұрын
once hot enough it manages to burn through the excess ok, but yes the pilot jet is too big i agree and the rollers are also too heavy. getting a tachometer very soon so waiting on that to come then i can pinpoint where the revs need to be exactly and ill get to start shimming the variator
@408Anthem
2 жыл бұрын
@@OscZip he sounds alittle rich at start but its a 70cc air cooled so he needs to run a little rich right? but why are the rollers too heavy?
@OscZip
2 жыл бұрын
@@408Anthem rollers were too heavy for the setup so i went with lighter, check out my recent vid to see what its like now. ive changed the torque spring also
@itsSloMo
2 жыл бұрын
Sounds like a hair dryer
@OscZip
2 жыл бұрын
send me link because i could listen to that all day 😀🔥
@I_am_BiG_Al
2 жыл бұрын
Brings back memories of my 172 gilly
@OscZip
2 жыл бұрын
good bikes man. 2 strokes can be ALOT of fun! regardless off CC 😀
@OscZip
2 жыл бұрын
check out my most recent vid bro
@I_am_BiG_Al
2 жыл бұрын
@@OscZip yeah just that sound does it for me
@blokkietdi
2 жыл бұрын
It needs a stiffer contra spring, like Malossi red or stage6 hard, combined with lighter rollers. These are way to heavy. The Cilinder is build for peak power at around 14k -14.5k rpm…..
@OscZip
2 жыл бұрын
done this last night mate. its now got a malossi mhr blue (+106%) contra spring and 4g rollers compared to 4.5g. also changed needle height to lean out up to mid throttle. variator needs a little shim still but ill get another video today after work.
@ryancarrington6064
2 жыл бұрын
@@OscZip get this vid uploaded
@OscZip
2 жыл бұрын
@@ryancarrington6064 i will get a vid today bro and will need to do some minimal editing on my laptop beforehand but it’ll be uploaded today! 💨
@OscZip
2 жыл бұрын
@@ryancarrington6064 vid out now bro, just read description on it
@tvdw6557
2 жыл бұрын
Mooi afgesteld man zou grotere carb erop doen 24mm s best full mallosi sws ook aanrader ma vsgm heb je die al
@OscZip
2 жыл бұрын
thank you! its a 28mm PWK not a 24mm, runs very well now. watch my newest video! it has a heavy oil mix but i managed to get the CVT nearly perfect 🤪
@georgerenolds859
2 жыл бұрын
sounds like you need a stiffer contra looks like power isnt delivering right away and deff lighten rollers but really nice
@OscZip
2 жыл бұрын
thats exactly my plans bro haha, waiting on tachometer and ill play with rollers. currently have a medium stage6 spring, not sure on the specifics but i do need a stiffer one definitely. thank you for the comment man! 💯💨
@joerdanjesther7240
2 жыл бұрын
That thing looi fun to ride around and ngl dude i love the sound so much is it an 2 stroke because it sound like it is 2 stroke
@OscZip
2 жыл бұрын
definitely a 2t bro, cant get any power like this out of a small cc 4 stroke
@grog4311
2 жыл бұрын
How do you manage to pull this power? is it a true 70cc or an upgrade kit for 50cc? also what is the modification list mate ,bloody legendary
@OscZip
2 жыл бұрын
not sure what you mean by true 70cc, but it is a Stage6 Mk2 Racing 70cc air cooled cylinder. ill get you the list now 🙏
@OscZip
2 жыл бұрын
stage6 mk2 Racing 70cc air cooled, Yasuni C30 exhaust, stage6 RT oversize variator, frontface, belt and torque converter, malossi mhr team 2 inner rotor, 28mm PWK carburettor, stage6 drag air filter, jasil evo hi-tec crankshaft, malossi oversize small end bearing, malossi delta clutch with clutch bell (adjustable), stage6 hard/red clutch springs set to max setting on the clutch, polini 360 intake manifold with spacer, artek k1 reedblock with carbon fibre reed petals, stage6 CNC quick action throttle
@incognito4061
2 жыл бұрын
I had a zip 50 (it went 55mph) with a few mods I don’t know what but that had sone serious power compare to all the other peds I’ve rode
@GREG_MOTO
2 жыл бұрын
50cc with big bore kit
@OscZip
2 жыл бұрын
@@GREG_MOTO my setup is just up there bro 👆👆
@7j8x74
2 жыл бұрын
what camera are you using? sick setup on the ped btw
@OscZip
2 жыл бұрын
Gopro hero 7 black mate, and thank you! 💯🔥
@7j8x74
2 жыл бұрын
@@OscZip no problem, thanks for responding. I'll be sure to subscribe to stay updated 👍
@OscZip
2 жыл бұрын
@@7j8x74 thank you bro, respect! 💯❤️🔥
@panna3218
2 жыл бұрын
bigger jet and lighter rolls around 4/4.5 gr
@OscZip
2 жыл бұрын
check out my newest video mate, runs alot betterr
@viperxmars6091
2 жыл бұрын
nice gloves
@OscZip
2 жыл бұрын
my decision at the end of the day boss. if im going for a literal 2 minute ride in an area ive been living and riding for over 10 years. i understand anything can happen but the possibility of it is very low. if i ever go to an are further away they i would want some protection
@danielsosnowski1698
2 жыл бұрын
Sick bike g
@yaser3144
2 жыл бұрын
do you have any tips on a first scooter?
@OscZip
2 жыл бұрын
Zip zip zip zip or Zip 😀😅 im joking but they are one of the best to learn on bro
@1000subspleaseno2
2 жыл бұрын
No go away
@OscZip
2 жыл бұрын
@@1000subspleaseno2 huh
@maxhicks6743
2 жыл бұрын
What rollers do you have and what is the top speed?
@OscZip
2 жыл бұрын
4.5g rollers i believe. im getting a tachometer soon to measure revs, so ill then see if i need heavier or lighter rollers (99% lighter rollers needed)
@OscZip
2 жыл бұрын
top speed: i had my girlfriends mum follow me on the dual carriageway and was going 80mph. car speedos are not accurate but 80mph is a massive number to see anyway
@maxhicks6743
2 жыл бұрын
@@OscZip I want to do a 65cc kit on my zip and I want the best top speed I can get out of it so heavier rollers is probably the best right?
@OscZip
2 жыл бұрын
@@maxhicks6743 no mate, rollers need to be specific for your setup. give me a min
@ihsaanrazaq8279
2 жыл бұрын
Flying around northwatford
@OscZip
2 жыл бұрын
putting NW on the map 🤪
@samme5798
2 жыл бұрын
the title is kinda funny: taming the (70cc) and then (beast) lol
@OscZip
2 жыл бұрын
sorry mate i have trouble choosing good titles without going for the same thing every time haha
@NotSOFast597_
2 жыл бұрын
what's the main jet from the carburator 28 mm en what the best one for 70cc kit 145 150 ??
@OscZip
2 жыл бұрын
running 140 main jet at the moment mate, which seems nice and rich for it. not sure on how different the jetting would be for a liquid cooled cylinder
@hassannaveed4788
6 ай бұрын
how long does the moped last whilst the kit is installed?
@OscZip
6 ай бұрын
around 30hrs engine run time
@mrbrown4142
2 жыл бұрын
Get it up in air 👀
@OscZip
2 жыл бұрын
slowly learning bro, this bike doesnt give me a choice sometimes 😃
@urbanbot587
2 жыл бұрын
Insane build but what are the laws on this in ur country? Are you allowed to drive this?
@OscZip
2 жыл бұрын
thank you man! and yeah mate its legal for road use
@urbanbot587
2 жыл бұрын
@@OscZip sickkk I live in the netherlands and If you drive a scooter you cant go over 45Km per hour or more then 50cc unless you have a motorcycle license 🤣🤣
@shitpostcentraI
2 жыл бұрын
@@urbanbot587 that's how its in most of europe, but there are still shit ton of 70 and 80cc's around
@urbanbot587
2 жыл бұрын
@@shitpostcentraI oh I didn’t know that. I drive a 80cc but I was caught in the first week🤣
@shitpostcentraI
2 жыл бұрын
@@urbanbot587 shoul've ran lol
@TheUncommonKIBBLES
2 жыл бұрын
sweet
@OscZip
2 жыл бұрын
💯🔥🔥
@K.A-87
2 жыл бұрын
nice weather
@OscZip
2 жыл бұрын
yeah 😬
@projectclark123
2 жыл бұрын
Sounds really good bro what more u got to do
@OscZip
2 жыл бұрын
thank you man! waiting on a tachometer to see where the revs are, then i can change roller weights to adjust peak rpm to match the c30 exhaust. and it should run even better 😀
@OscZip
2 жыл бұрын
also need a stiff torque spring because it gets a little sluggish when cruising around. it only likes pulling off from a standstill at the moment
@mikawolsink
2 жыл бұрын
Check ure size mainjet the cil doesnt run the max my 125 2stroke does more rpm😅
@OscZip
2 жыл бұрын
running a big 140 at the moment. which may be too big but it runs good. thats not the rpm problem though, i need to change roller weights to lighter ones so the engine stays at a constant higher rpm. but before playing with that im waiting for a stiffer torque spring so the belt stops slipping and causes the bike to stay at low rpm while riding. new torque springs are on their way, along with a tachometer so i can visually see the rpms, and adjust with rollers to where the peak rpm is with the c30 exhaust. should make it alot quicker too 💨💨
@DutchDukeMan
2 жыл бұрын
sounds like it needs a lot of tuning
@OscZip
2 жыл бұрын
alot of tuning has been done since this video. will try to get one today
@millymoo6575
2 жыл бұрын
Epic mate
@OscZip
2 жыл бұрын
thank you!🔥💯❤️
@dertig2623
2 жыл бұрын
What’s the top speed?
@OscZip
2 жыл бұрын
realistically around 70/75mph, got clocked at 80mph by my gfs mums car but speedos are off. havent done an accurate measurement yet
@mohamedabada7101
2 жыл бұрын
was it already warm?
@OscZip
2 жыл бұрын
yeah mate i work on this bike 24/7. so before each vid i wouldve tuned something, done a test run at idle with a few blips of throttle. but check out my recent vid mate, it explains whats been happing to make it run like this
@supertreme5559
2 жыл бұрын
i also thought my 70cc moped was a beast until i actually rode a motorcycle with actual power
@OscZip
2 жыл бұрын
i have ridden bikes with actual power. never said this was anything special. it was a 3hp engine restricted to 28mph from factory. with me playing with it for 3 years and spending multiple thousands on the engine, im now somewhere around 20hp and capable of going around 70/75mph. big factor is that its running an air cooled cylinder, which are not known for making this kind of power at all. its running a Yasuni C30 exhaust which isnt even designed for air cooled cylinder kits but ive managed to get it to run quite good 🙏
@OscZip
2 жыл бұрын
the bike weighs 71kg/157lb so power to weight ratio is quite silly
@joshrushton5950
2 жыл бұрын
I've had r1s and an rr. Had ago on my mates these feel silly fast for a scooter.
@OscZip
2 жыл бұрын
@@joshrushton5950 they are bro! all about power to weight ratio. this thing weighs around 70kg, and pushing near 20hp! 💨
@joshrushton5950
2 жыл бұрын
@@OscZip little rocket mate.
@heineken7426
2 жыл бұрын
Does it overheat?
@OscZip
2 жыл бұрын
doesnt over heat mate 😀💨 i do make sure im always giving it little blips of fuel to cool the cylinder down, and aslong as you have a big enough jet it should be ok. i did have some detonation issues when holding throttle wide open for a solid minute. i guess you just shouldn’t do that with an air cooled engine but i haven’t had it happen since
@MariusAchton-mf9md
2 жыл бұрын
is it 2t or 4t?? cause i have a 4t.... and its bad.
@OscZip
2 жыл бұрын
definitely a 2t mate, small cc 4ts stuggle to see power like this
@OscZip
2 жыл бұрын
engine swap with a 2t bro
@philmcmorris2468
2 жыл бұрын
Top speed?
@OscZip
2 жыл бұрын
70/75mph+ (80mph on car speedometer) watch newest vid!
@ryderwilson7955
2 жыл бұрын
I think you confused between MPH and kmh, no way a 70cc reaches more than 80 kilometers per hour
@rein6477
2 жыл бұрын
some 70cc's can go over 100km/h
@OscZip
Жыл бұрын
definitely over 80kmh mate around 18hp to 70kg ped
@ChrizzOG
Жыл бұрын
How do you disconnect the oil pump to run pre-mix?
@OscZip
Жыл бұрын
drain the 2t tank, snip hoses from tank and then take side casing off, 2 PH2 screws holding pump in place, undo them and take pump off
@ChrizzOG
Жыл бұрын
@@OscZip Thank you🙏
@OscZip
Жыл бұрын
@@ChrizzOG no problem man!
@CkaStudios
2 жыл бұрын
Cuanto de carburador ?
@OscZip
2 жыл бұрын
28mm PWK
@minagaming72
2 жыл бұрын
70cc 🫡
@OscZip
2 жыл бұрын
air cooled! 😀🤪🔥🔥🔥
@NotSOFast597_
2 жыл бұрын
stock gearing??
@OscZip
2 жыл бұрын
yeah mate
@nigelvernau6962
2 жыл бұрын
Beast of a ped🔥💥💥💯
@OscZip
2 жыл бұрын
thank you bro! 💨💨❤️💯
@OscZip
2 жыл бұрын
watch the new vid, its running alotttt better 🤪🤪
@nigelvernau6962
2 жыл бұрын
@@OscZip ill drop a sub so I can keep up with the vids and watch em
@OscZip
2 жыл бұрын
@@nigelvernau6962 my bro i appreciate that🙏💯
@nigelvernau6962
2 жыл бұрын
@@OscZip no worries 👍
@mumble_jumble5087
Жыл бұрын
Yoooo I’m from Hemel
@OscZip
Жыл бұрын
ayyy come on my bro💯
@jaspervv1198
2 жыл бұрын
Bruh its fast as hell but stop playing with the gas, it aint a dirtbike or derbi of some kind
@yyyega
2 жыл бұрын
🖤🔥
@OscZip
2 жыл бұрын
🙏💯❤️
@edc4454
2 жыл бұрын
how does this run but not my completly stock moped breaks every 10 minutes:(
@OscZip
Жыл бұрын
haha im sorry :( ive learnt a thing or two when it comes to these little engines though, some experience helps XD
@woodgreen8982
2 жыл бұрын
its slow🤔 for a beast . do what im used to ad the year 2007 ..even aircooled 😅
@OscZip
2 жыл бұрын
check out my new video bro
@PUBGMOBILE-ms9qh
2 жыл бұрын
Lc or ac?
@OscZip
2 жыл бұрын
AC mate
@OscZip
2 жыл бұрын
check out my latest vid 🙏
@Echoxus
Жыл бұрын
🔥🔥
@fastbicyclerider7300
Жыл бұрын
instal a power box
@OscZip
Жыл бұрын
whats that bro
@rv9990
2 жыл бұрын
How are the laws in the UK, if police catches you with a 70cc? Instant loss drivers license and repo of the scooter?
@OscZip
2 жыл бұрын
if i was to get pulled over they would probably have a few questions. but it depends on who stops you. some police are very nice and dont see anything wrong with it, but others can cause some issues if they wanted to
@andershj6524
2 жыл бұрын
@@OscZip in norway the police go out looking for kids on illegaly tuned mopeds and they will take your license if it goes faster than 45 kmh
@OscZip
2 жыл бұрын
@@andershj6524 thats sad man… cant they be out looking for actual criminals instead? 😔 instead of someone whos found a passion for mechanics and plays with tuning 😕. then governments wonder why crime rate is so high
@ik_vind_helemaal_mooi
2 жыл бұрын
in the netherlands we have a rollerbank that checks the speed that the rear wheel is moving. if it is above 53 km/h you will need to get your scooter checked again. they will check if it goes 53 again. untill then you are not alowed to drive it. but a LOT of people just say fck it and just make it go faster tho 😁. also we have some ecus that can limit the speed with the push of a button. but you almost always see them only on 4 strokes.
@jadenknight9876
2 жыл бұрын
It looks like first person going up he wrong way do not enter zones I’m not used to seeing cars driving on the other side
@iansvecs
2 жыл бұрын
Weaving side to side constantly, no hand protect and constant 'revving' of an automatic belt driven scooter.
@OscZip
2 жыл бұрын
“constant revving” because its a tiny air cooled 2 stroke engine under a lot of load. if i dont throttle when slowing down it starves the engine of oil since the 2t oil is premixed with the fuel. i understand it looks like im being an idiot, but honestly thats just me taking care of the engine. the aim is to never let it run dry. and it also helps stop the engine overheating, constantly giving it little splashes of fuel/air mix without actually revving up too high. 4strokes you can instantly stop without any throttle because the oil is contained within the sump and galleries (if any) but a 2stroke is only provided oil when throttle is applied, hence the constant noise and throttle unfortunately.. thank you for your comment
@OscZip
2 жыл бұрын
weaving side to side keeps the tyres warm and grippy, but i admit i may do it too much. ☝️ at the end of the day its just a little moped mate.
@iansvecs
2 жыл бұрын
@@OscZip I understand it's just a scooter, but it breeds bad habits that could see you injured or worse later on when you're riding something bigger. My comment was aimed mainly at safety! I've used my arm as a brake on tarmac, it's not fun.
@OscZip
2 жыл бұрын
@@iansvecs i see what you are saying mate, i appreciate the advice! for now i think i look silly enough as it is with my protective jacket on a little moped but i will look into getting some gloves etc. so im prepared when i want a go on a much bigger bike 👍 definitely do not want to use ANY of my limbs as a brake 😃😂😂
@49ccscoot
2 жыл бұрын
@@OscZip Forget what people may think of your appearance when considering gear. They've never crashed before or think a scooter/moped is a toy. I crashed at around 40MPH a few years ago and my helmet saved my life even though I was still knocked out and I had a bunch of broken bones. Even typical scooter speeds are no fun when you bounce off of the road. I had a doctor literally laugh in my face when I told him I was there because I hit a deer on a scooter. Their loss if they don't know how much fun scoots are. Nice scoot!
@wesleyvandenherik4516
2 жыл бұрын
Is this aloud in the UK? In the Netherlands youll be fucked very soon. They take your registration plate untill you bring the zip back in original state which means in the Netherlands that his top speed is 30 miles a hour. Or 15 miles a hour on the once without helmet which is bad for the scooter all the speed limiters but the goverment dont give a fuck.
@OscZip
2 жыл бұрын
it isnt legal or illegal lets just say. it passed MOT (annual inspection), it is insured and im not breaking any laws riding it, apart from if i was to break any speed limits (which i dont 😃) they are not as strict over here in the UK, this bike would catch polices attention but i try to avoid situations like that.
@leonhayward8547
2 жыл бұрын
You can buy switches that makes the revs down or it'll go from a high end 70cc to sounding stock
@OscZip
2 жыл бұрын
@@leonhayward8547 tricky to do with a setup like this since the clutch engages at a sill high rpm already so it wouldnt really move. on a lower setup it could work well yes 👌
@user-cb1oe6ry6t
8 ай бұрын
you need a bigger carb it cant keep up
@OscZip
8 ай бұрын
there was a rev limiter set by accident on the malossi ignition i thought 0 was off, but it was actually 11k rpm the carb was either a 28mm or 30mm PWK
@Sumsayy
2 жыл бұрын
top speed 40mph lol?
@OscZip
2 жыл бұрын
what do you mean mate
@ItsDxmo
2 жыл бұрын
wtf
@mftuning2891
Жыл бұрын
Too heavy weights
@OscZip
Жыл бұрын
in this video yeah
@spade263
2 жыл бұрын
get a real bike not a moped haha
@OscZip
2 жыл бұрын
got a real moped 😋 my license is limited to 125cc. and no way would i cruise around on a 4t 125.. especially since my little moped leaves them behind like nothing. one day ill get a bigger license but i want a big big bike not anything near a 125
@spade263
2 жыл бұрын
@@OscZip my bad bro for hating idk why i did, i dont even have a lisence and i have no room to talk. Wish you a good day bro
@OscZip
2 жыл бұрын
@@spade263 haha no problem man were all entitled to our own opinions, you done nothing wrong. thank you bro you too💯🔥
Пікірлер: 212