Didn't even know you were out here. Enjoying the video. Fun and informative. Axels...Oh Yeah ;oP Following along, Painless ( P.S. You don't need another magnet, just cut a piece of steel tube or screw to fit and glue it into place. The magnet on the cover will definitely grab it like it was another magnet. )
@PitstainHobbies
2 жыл бұрын
Damn that's brilliant on just putting a small screw on the backside! I ended up finding spares on Amazon and literally 5 minutes after replacing I found the original lost magnet!! Thanks for watching!!
@modeltankguy
2 жыл бұрын
kool beans keep them coming ill have to get me that tension idler set for my kit hate having to fix mine every time i want to use it
@PitstainHobbies
2 жыл бұрын
I swear by the Henn-Tec idlers supplies are a bit thin now but you should be able to find a set somewhere.
@steve1315
2 жыл бұрын
very nice , saw the Porsche Tiger at Bovington does look cool. Enjoying this build two tank models better than one welljell.
@PitstainHobbies
2 жыл бұрын
Thanks 👍
@jonfoisy1237
2 жыл бұрын
That's going to be a sick model when it's done!👍👍
@PitstainHobbies
2 жыл бұрын
Thanks, all the episodes are up and it's been done for some time now.
@Pzjgr
2 жыл бұрын
Awesome!! Feel the same way.....production turret doesn't do it for me either.1 Thank you for this great video!
@PitstainHobbies
2 жыл бұрын
Thank you for watching and I can't wait to see how this turns out with the Porsche/pre-production turret.
@hanssmidt12
2 жыл бұрын
@@PitstainHobbies its not porshe who made the turret, its an design of henshel what Got rejected because of the shot trap and dufficulty to produce
@PitstainHobbies
2 жыл бұрын
@@hanssmidt12 Hi Sz, I was trying to be clear that the Porsche turret nick name is just that, it is a Krupp turret that was informally given the Porsche name due to Porsche being one of the design companies awarded a contract and their design was totally different and not selected, however due to people putting that name on model kits for decades it is appropriate to use the erroneous nick name of Porsche for this build, as that is what people are searching for on here and not as commonly typing in "pre-production" or "Krupp" or "shot trap"....I am using the term casually and loosely, keep watching and you will see me do air quotes with my fingers when saying the word in alot of parts of this build.
@AlisonFort
2 жыл бұрын
Thank you for the video. Must ask - how is adorable little Groot doing?
@PitstainHobbies
2 жыл бұрын
Little Groot passed last May due to Epilepsy complications, but that you for asking, he is in Puppy heaven.
@AlisonFort
2 жыл бұрын
Aww… that’s a shame. I’m sure you made his short life special❤️
@darronhedges5873
2 жыл бұрын
Godhand CN120 would be better,i use Single blade for \35 where its for small cuts.CN120's last longer and aren't as brittle on blades(scissor jaw).
@PitstainHobbies
2 жыл бұрын
Thanks for the tip, I use my Tamiya nippers for big cuts and the god hands for finish work.
@darronhedges5873
2 жыл бұрын
@@PitstainHobbies When the Tamiya lose their edge the GH craft nippers be worth a look.Blades ok for cutting wire and small brass rods,according to GH.Back to the /35 scale stug IIIG interior.
@richardfazio2417
2 жыл бұрын
Is the Porsche and henschell turret the same or different
@PitstainHobbies
2 жыл бұрын
The Porsche and Henschel turrets were both manufactured by Krupp the "Porsche" design has the curved front mantlet area which ended up being a liability as the lower part created a "shot trap" so the flat slightly angled back design on the "Henschel" ended up as the normal production turret.
@rogerdreier2584
7 ай бұрын
Working no BLBLABLA
@PitstainHobbies
7 ай бұрын
but BLAHBLAHBLAH is my best talent, should I change to YADDA YADDA?
@yamenlasyho9718
3 ай бұрын
Hello just found your channel and really enjoy it but got a few questions, for the metal hull if I spray paint the whole thing would this not lead to paint getting stuck and hindering the movement of the wheels etc?
@PitstainHobbies
3 ай бұрын
Glad you are enjoying the videos and thank you. If you just mask off the axles you will be fine, a coat of etching primer and paint on the outside of the hull won't cause any problems.
@yamenlasyho9718
3 ай бұрын
Sounds good and which are the axles sorry but English isn’t my first language. And did you cover it during painting?
@PitstainHobbies
3 ай бұрын
@@yamenlasyho9718 you tape over where the bearings go, that is all.
@yamenlasyho9718
3 ай бұрын
Thank you, by bearings you just mean the front surface of the wheels right, I am most likely going to spray paint the hull and wheels separately in this case of the hull would I need to mask anything in case of having paint getting stuck making the wheels hard to attach to the thing that is sticking out. Or is it not necessary
@PitstainHobbies
3 ай бұрын
@@yamenlasyho9718 the axles are the metal arm where it goes into the wheel.
@darthgeoff2011
2 жыл бұрын
Hey man I was joking I'd take your KT you don't want haha
@PitstainHobbies
2 жыл бұрын
I will kepp you in mind when i am done with the build.
@darthgeoff2011
2 жыл бұрын
Let me know if u want to sell that js2 haha
@PitstainHobbies
2 жыл бұрын
Never Geoff, sorry bud I love that tank too much.
@reconmodelsvaughn469
2 жыл бұрын
Let me know if you want to sell the other kit you aren't going to build I looking for one for a big project. Please let me know 🙏 I just found your channel iam a full time model builder I only build German ww2 .please I would give it a great home I have a very big Collection
@PitstainHobbies
2 жыл бұрын
Hi Recon, once I am done with this project I will figure out where the leftovers are going, I already have a few requests from some of the people in the R/C tank world who want to add the parts to make that one a runner also. make sure to subscribe and hit the bell so you will know when more videos go live. Thank you so much for watching!!
@reconmodelsvaughn469
2 жыл бұрын
@@PitstainHobbies yes I watching your videos now ..if you are on Facebook let me know .if you need anything I have tons of kits and parts
@PitstainHobbies
2 жыл бұрын
@@reconmodelsvaughn469 Thank you so much for the offer, I have to setup a facebook page for the channel as I only have my personal one.
Пікірлер: 47