The 1984 FAV got me started into the real men hobby of RC, I have the 2011 re-re now built up. In my mind I thought the original went much faster then now. Nice to see you have an original to work on. After the FAV I got (with my brother) a Hornet, Blackfoot, Hot shot, Sonic Fighter, Pajero, Vanquish, Top Force(58100, 58362, 47350 got them all) , Durga, CLK HKS (58291, bought in japan) , Nissan Coppermix, BMW M3. Later on I picked a lots of re-re version of the old cars ie. Buggy Champ, Fighter Buggy, Avante and black version, Subaru Brat, Vajra, Egress, Toyota Tundra, XR311, Wild Willy, Mountain Rider, Ford Mustang, G500 and a TT-02R chassis, Toyota Supra. Most of them are still in box.
@TAMIYALegends
4 жыл бұрын
Sonny Wow that’s an awesome line up you have my friend 🤩👊🏻
@davepearce6359
4 жыл бұрын
Spot on video again Glenn. Very interesting subject. FAV is FAB. Looking forward to seeing the next video. Thank you. 😊👍🏻
@TAMIYALegends
4 жыл бұрын
Dave Pearce Thanks Dave 😊👊🏻
@mattmclafferty6265
4 жыл бұрын
Thanks Glenn.
@TAMIYALegends
4 жыл бұрын
Matt McLafferty Cheers Matt 👊🏻
@robcraighill6315
3 жыл бұрын
Your back catalogue is awesome viewing Glenn!
@markysmodsandmodels1163
4 жыл бұрын
Great job on the paint buddy. It's so so similar to the wild one build! But in reverse! 😂😂😂
@TAMIYALegends
4 жыл бұрын
Markys Mods and Models Lol 😂 absolutely spot on 😂
@danking2715
4 жыл бұрын
Glenn very nice .FAV. For the 50 cal machine gun use a spring from a clothes peg .🤘🏼
@TAMIYALegends
4 жыл бұрын
Dan King Lol 😂 Dan that’s a great idea 👊🏻
@mtbalot
4 жыл бұрын
Man those Tamiya instructions are beautiful. I'm a CAD draftsman so I know how hard it is to make assembly instruction look that clear. Sorry for geeking out just then LOL
@TAMIYALegends
4 жыл бұрын
mtbalot No I fully get what your saying my friend, I’m no expert in this, but the manuals are a thing of Beauty too 🤩👊🏻
@bobbiehighsmith4780
4 жыл бұрын
That is freaking awesome from 1984👍👍👍
@TAMIYALegends
4 жыл бұрын
Bobbie Highsmith Thanks Bobbie 😊👊🏻
@CarminesRCTipsandTricks
4 жыл бұрын
Glenn, that came out GREAT! 😎👋👋👋👋👋👋👋 The Lettering on the Tyres just POPS so well, and your building shows the same passion for the Hobby that I have. I can only WISH I could afford any of the super awesome Kits that you show.... I haven't been able to buy ANYTHING since 2014. 💔😢 My past 3 Videos, I've been doing free mods on me Holiday Buggy, including custom Interior and Inner Fenderwells that actually keep dirt out. I'm just trying to find things to do to keep my Hobby alive. It's good for the Soul. Carmine ✈🚂🚙
@CarminesRCTipsandTricks
4 жыл бұрын
As disappointing as it is.... Since some originality is already lost, I'd say go with DuBro Ball Link Steering and a Kimborough Servo Saver. ELIMINATE the notorious Tamiya SLOP! The Grasshopper-esque POGO STICK Springs are a shock!! (Pun intended!) 😜 I would DEFINITELY see if Frog 2.0 Dogbones could be fitted instead. You could still hide them in those Driveshaft Boots. 😉 Trials and tribulations of buying used. A little challenge, a little fun!
@TAMIYALegends
4 жыл бұрын
PoorManRC Great information my friend 😊 Thanks for watching 👊🏻
@stephenstott7145
4 жыл бұрын
Hi Glenn, after watching part one I decided to look at the info on the chassis of my FAV that im building from new spare parts here's what it Say's: model No 58046, part No 0984057-01 and the year is 1984. Steve UK.
@TAMIYALegends
4 жыл бұрын
Stephen Stott Excellent an original then 🤩👊🏻
@Name-ml6pi
4 жыл бұрын
i love your work
@TAMIYALegends
4 жыл бұрын
Name Lovely thanks for watching 😊👊🏻
@musso3447
4 жыл бұрын
Very good! andXR311 similar! Very dizain TAMIYA!
@TAMIYALegends
4 жыл бұрын
케피 Thanks for watching my friend 😊👊🏻
@musso3447
4 жыл бұрын
@@TAMIYALegends 😁👌
@davidturner2365
4 жыл бұрын
Looks cool to me 👍
@TAMIYALegends
4 жыл бұрын
David Turner Thanks buddy 😊👊🏻
@coryn1980
4 жыл бұрын
Great video it looks amazing glenn top work as always mate
@TAMIYALegends
4 жыл бұрын
coz Thanks buddy 😊👊🏻
@phildavis4878
4 жыл бұрын
You did an excellent job on that car I like how it came out that's something about finews ones though sometimes gets frustrated because they say all the parts of it and tell mate at least you at you with Eva to get it if my I'm sorry if my spelling is not that great I'm not good at spelling awesome video thanks for taking me along
@TAMIYALegends
4 жыл бұрын
phil davis Well thank you so much for watching Phil, you’re support is my appreciated my friend 😊👊🏻
@AL-ud2is
4 жыл бұрын
watching you build these cars takes me back to the 80's as a kid building mine on xmas day lol, had a "sand rover" first, then the "hornet" and last one I had was the "wild one"...thank you to my wonderful parents for buying me these kits :) and thanks for these vids
@TAMIYALegends
4 жыл бұрын
AL It’s all about the memories my friend 🤩👊🏻
@bespincustompropsbombarta8300
3 жыл бұрын
Just put together a bundle of parts hotshot 2, needed front ball ends and links for the anti-roll bar plus upper screw pins for front and rear suspension, not complaining as I totally expected parts to be missing, now though I have a fully buily Vintage hotshot 2 sporting a Vintage Parma Cyclone Stock motor that came in the bag of parts, Bonus 😎
@-Dash-
4 жыл бұрын
Looking good
@TAMIYALegends
4 жыл бұрын
MeesterDash Thanks buddy 😊👊🏻
@justinc9425
4 жыл бұрын
Hi and my apologies if this has already been mentioned but the steering rods you have are correct for the original release of the fav. What you have is a re-issue E- sprue for the gearbox parts and this has the slightly longer front trailing arms which were on the wild one. Think tamiya had to make them slightly longer to accommodate the larger wheels of the wild one and hence these issues in the re-re. Good original chassis by the way, no cut out for battery lead like on re-re. Hope this helps
@TAMIYALegends
4 жыл бұрын
justin c That’s excellent information Justin, many thanks my friend 😊👊🏻
@justinc9425
4 жыл бұрын
@@TAMIYALegends no problem. I have 3 original fast attack vehicles and by far the hardest parts to come by are original e-parts and have been caught out by buying supposedly original parts before. The only noticable difference is a slightly wider spread on the front end. Ps great channel mate and love your passion 👍
@robertlongley9153
3 жыл бұрын
I loved this so many ideas now with the Fast Attack I now own. But a person with you experience doesn’t a challenge like this on a vehicle you wanted make it all the more worthwhile. Like the man said I Have A Certain Skill Set that could be very useful in a time like this.🤣
@paulus842000
4 жыл бұрын
Nice build😊 go down to your local push bike shop and see if they sell any spokes with the thread you are looking for. Spokes are easy to bend and get the right shape. Good luck to you
@TAMIYALegends
4 жыл бұрын
paulus842000 Thanks for watching buddy 😊👊🏻
@jasonboggs5454
3 жыл бұрын
Cool build..!!!!
@jamescunliffe9872
4 жыл бұрын
If you get a scratch you can sand in the camouflage with fine sandpaper! I think the scratches will add a touch of scale realism as many military vehicles are repainted to suit the environment that they are deployed in. Furthermore add_vice ! Lol,collect more tools to solve annoyances
@TAMIYALegends
4 жыл бұрын
James Cunliffe Thanks James, great help as always my friend 😊👊🏻 As for tools and equipment I haven’t be careful, I could be shipped back off to the uk with a couple of weeks notice. So I kinda have to keep that in mind 😬
@jamescunliffe9872
4 жыл бұрын
@@TAMIYALegends you may need a pair of wellies as most of the country is flooded!!!
@h-jg7730
4 жыл бұрын
You could put the pin in a drill and sand it down till its fine 😁👍
@TAMIYALegends
4 жыл бұрын
H-J G Great Idea buddy 😊👊🏻
@leehurst6922
4 жыл бұрын
The correct front springs are like the grasshopper I think
@TAMIYALegends
4 жыл бұрын
Lee Hurst Cheers Lee 👊🏻
@tamiyafrog3220
4 жыл бұрын
Enjoyable video.
@TAMIYALegends
4 жыл бұрын
tamiya frog Thank you 😊
@wesleydonnelly2141
4 жыл бұрын
Lovely job so far pal. You know i never realised the fast attack had a Grasshopper gearbox at back!?? Thats kinda cool! Obviously i never owned one of these, and only ever saw a couple pics in my old Tamiya catalogues, and never remembered seeing the GH gearbox on back. Thanks for the vid my friend! Look forward to seeing the final product! Wes.
@TAMIYALegends
4 жыл бұрын
wesley donnelly Hey Wes, It’s not really the grasshopper gearbox, similar gear layout I guess, but the actual housings are really different. Thanks as always buddy 😊👊🏻
@wesleydonnelly2141
4 жыл бұрын
@@TAMIYALegends oohhh right i see? Thanks for educating me my friend. Beautiful little model btw! Can't wait see it finished! and thank you too for the great channel/content.
@DustyFingersRC
4 жыл бұрын
This and the Wildone are my favourites. The scale is just so spot on and great to drive.
@TAMIYALegends
4 жыл бұрын
DustyFingers 100% agree my friend 🤩👊🏻
@arnoldapplewhite3149
4 жыл бұрын
looking good Glen. Brings back fond memories of when I build my FAV. Loads of work and even more paint but well worth the work that goes into it. I have never run mine for the same reason that I don't wont to scratch the paint and as I did mine in camouflage it would be hard to touch up the scratches. She is on the shelf where she will be looking good forever! The plastic nuts you used on the top of the roll cage are the correct nuts. I think they used plastic to make it easier to paint them to match the body.
@TAMIYALegends
4 жыл бұрын
Arnold Applewhite Excellent thanks Arnold, yes these are 100% shelf Queens my friend 😊👊🏻
@schuttrostig5729
4 жыл бұрын
Nice Job, to bad on the missing parts. Of course they are all available from the rere one, but i know thats not what you wanted. What i did mention: at 2:43 top middle you can see: no recycle bin stamped into the chassis. At least my RERE FAV has one, there might be multiple versions of the rere (i doubt that) or it is an original Chassis. Metal parts bag with the front springs is "Tamiya Metallteile-Beutel A Fast Attack Vehicle FAV #19401790" Steering Rods are: #19401791 and the MG spring is: #15040013 . All still available in germany.
@TAMIYALegends
4 жыл бұрын
Schutt Rostig Excellent thanks for the information it’s much appreciated Schutt 😊👊🏻
@jodyblackwell9012
4 жыл бұрын
To keep the paint from coming off when you drive it several coats of semi gloss clear coat and that will protect it a bit. Use urethane type clear coat very strong .
@TAMIYALegends
4 жыл бұрын
Jody Blackwell Cheers Jody, I was happy just to build this one tbh, the actual running of it didn’t really appeal to me 😬 Thanks for watching
@Houleigan
4 жыл бұрын
Looks cool! I have only seen them in videos and on shelves. Thanks for sharing!
@TAMIYALegends
4 жыл бұрын
The Houleigan Thanks for watching buddy 😊
@thestuffz
4 жыл бұрын
looks great. On my FAV there is a net "roof". it's a nice military touch.
@TAMIYALegends
4 жыл бұрын
TheStuffz Oh that’s a great touch buddy 😊👊🏻
@darrengrimmer8541
4 жыл бұрын
I think it’s brilliant Glen!!!. I’m sure you’re in pain with the build especially as it was a box of bits!!!!!. However another classic from our era!!!. Really different in the way it goes together. I’m just gutted this one passed me by back in the day!!
@TAMIYALegends
4 жыл бұрын
Darren Grimmer Yeah it was a really enjoyable project Darren, but it really all came together once the driver figure went in 😊👊🏻
@donovangladden9074
4 жыл бұрын
Didn't win it on the raffle...gonna have to buy one now! Looks like such a fun buggy to build and customize. Great video as always Glenn!
@TAMIYALegends
4 жыл бұрын
Donovan Gladden Thanks buddy 😊👊🏻
@thedumpydustman6088
4 жыл бұрын
Looking good so far never been a big fan of this RC because there always painted camo but just green looks awesome. Looking forward to seeing it finished matey!
@TAMIYALegends
4 жыл бұрын
The Dumpy Dustman Thanks buddy 😊👊🏻
@robquinton9835
4 жыл бұрын
i used a piece of fuel line from a nitro car to fit my gun to car, works a treat...
@TAMIYALegends
4 жыл бұрын
Rob Quinton Yes that’s pretty much what I used, it worked really well 😊 Thanks for watching Rob 👊🏻
@somefuckingprick
4 жыл бұрын
I was going to recommend black fuel tubing, until I noticed that you already had. The fuel tubing works waayyyy better than the spring. The spring always seems to bend slightly-- Causing the little machine gun to angle slightly.
@rcintro1489
4 жыл бұрын
Looks great man good work!
@TAMIYALegends
4 жыл бұрын
RC Intro Thank you 😊
@mikeymike3240
4 жыл бұрын
Why didn’t you paint everything army green, instead of leaving the black parts black. I think it would have looked much better. It still looks great, but........lol don’t forget it’s an off road vehicle, scratches are part of the enjoyment with it. You could cover the bottom of the chassis with an off road buggy tray. I may have to get meself one of these wee rascals.
@TAMIYALegends
4 жыл бұрын
Mikey mike Yeah I looked at doing it all one colour, but after looking at various pictures of other ones I opted for this 😬 Thanks for watching buddy 👊🏻
@simoncycling6685
4 жыл бұрын
Steering rods use cycle spokes !!
@TAMIYALegends
4 жыл бұрын
anything rc Might be a little too thick 🤔🤷🏼♂️ Thanks for watching buddy
@STEVOD313
4 жыл бұрын
I hope I can find one of these in stock to buy, I wanna build one n own one of these bad!
@p-hawk1956
Жыл бұрын
I've been watching the Hotshot and Supershot videos for a few weeks. So interesting to watch, thank you. Did you ever make longer threads for the drive arms or find shorter ones? I stopped using my Wild One after only a few years because I broke a drive arm around 87 and the replacement E parts arms were strangely too short. I took them back and exchanged them for more E parts with shorter arms. I did not return them and no longer used my car. 35 years later, I noticed a comment below explaining why they don't fit...
@jamesmcmorran7906
4 жыл бұрын
Hi mate, can't help notice your northern accent, I'm from Bolton and you sound like a local lol,
@bustersbashers2280
4 жыл бұрын
It’s looking great, I have those Z - Pliers that I don’t use any more, where are you in the U.K....?
@TAMIYALegends
4 жыл бұрын
David White Unfortunately I’m in Canada David 😂👊🏻
@bustersbashers2280
4 жыл бұрын
TAMIYA Legends , or okay, sorry you live too far away for me to give you them, 👍👍👍👍👍
@bradkalman2353
4 жыл бұрын
You know with the shocks you could add heavy or grease and give you more dampening or you could find some rubber tubing that will fit onto the shaft and it could also reduce the bouncing.
@Leonsrchobbys
4 жыл бұрын
I really do like this it looks awesome my friend Quick question my TTO1 front diff is clicking I've had a look inside there is no damage to the gears or bearings do you know what is possibly could be👊👍😎🇬🇧😊
@TAMIYALegends
4 жыл бұрын
Leons rc hobbys Hmmm 🤔 not sure if you’ve checked all the basics Leon, could the noise be coming from the drive shafts or cups 🤔🤷🏼♂️
@namAlexander
4 жыл бұрын
that gearbox looks same as the vintage grasshopper?, a good telfon ect based spray oil would sort that
@TAMIYALegends
4 жыл бұрын
nam Alexander It’s pretty much the same gear layout but the casings are very different. Thanks for watching buddy 😊👊🏻
@namAlexander
4 жыл бұрын
@@TAMIYALegends subscribed a while ago as i fell on your channel its good, been refurbishing my old willy m38, super champ and clio FF01 took ages lol , motors is what i was also looking at as i have a tamiya type r it has silly rpm but not the touqe like the sport tuned, that r eats tyres
@TAMIYALegends
4 жыл бұрын
nam Alexander M38 🤩🤩🤩
@namAlexander
4 жыл бұрын
@@TAMIYALegends you not got one?
@TAMIYALegends
4 жыл бұрын
nam Alexander No it’s a car I’ve never had, I’ve actually never seen one in the flesh lol 😳
@fleppie75
4 жыл бұрын
does it now have the double wishbone?
@TAMIYALegends
4 жыл бұрын
fleppie75 Not sure what that means my friend, it’s just the standard kit, no mods have been done 👊🏻 Thanks for watching
@bradkalman2353
4 жыл бұрын
I would run every model you have.
@maryvenianakis1270
4 жыл бұрын
Awesome !!!! Might be my next one. I'll keep in touch in the spring for our race day!! Looking forward to meeting/racing you. Also do you have or own your own store? Thanks
@TAMIYALegends
4 жыл бұрын
Mary Venianakis Excellent looking forward to it, it would be great for me to make a video of the day 😊👊🏻 If you’re on Facebook, then checkout the TAMIYA Legends group, we also have a dedicated selling group which is pretty busy 😊👊🏻
@maryvenianakis1270
4 жыл бұрын
Hi! Yeah not really part of Facebook..... never was my thing but I can give you my cell if that works? Let me know. Thanks and keep up the great work
@ChrisLee-UK
4 жыл бұрын
Shame about the missing parts Glenn but it's an old buggy. Looks ace though doesn't it? :o
@TAMIYALegends
4 жыл бұрын
Chris Lee - UK Yeah I wasn’t too bothered as I was building it, all I was thinking is it’s one to go on a shelf 😬 Thanks for watching Chris 👊🏻
@bradkalman2353
4 жыл бұрын
Could you I have sprayed it with some type of protected for the paint nothing glossy but something it would protect it like polyurethane?
@bradkalman2353
4 жыл бұрын
See if you can find some stiff Springs from a ballpoint pen you know that pushes it up about 1 see if you can find stiff Springs that might fit that front end.
@bradkalman2353
4 жыл бұрын
Noteshelf queens and you should have put ball bearings in it.
@bradkalman2353
4 жыл бұрын
15 tooth would give it more torque and more acceleration but would not have higher top-end you should replace the pinions.
Пікірлер: 113