Main video with the Tamiya DT-02 MS 'Overkill' Limited Edition (Tamiya 49475) with a sensored Tamiya TBLM-02S brushless system and additional aluminium and carbon hop-ups from 3Racing and Tamiya. The DT-buggy cavalcade continues ...
If you want to watch it running without music and editing here's a short one-take in 4K: • Tamiya Tuesdays in 4K:...
Important notice!
The lockdown guidelines in Denmark has recently been changed and the government has begun to re-open society a little, as the curve has fallen very low. Schools, kindergartens, some areas of business and recreational activities has re-opened. Sport activities with less than 10 people (no contact and of course in the open air) has been allowed. Even professional sport activities of less than 100 people (no contact, no audience, open air) has been introduced. Nevertheless, the general guidelines are still "stay at home", but short outdoor and recreational activities with no possibility of crowding of more than 10 people at a place (needless to say the parks in the Cities are still a no go) are allowed. And so here I am, in my very little "SECRET RC SPOT" near our vacation house. Far, far out in the Danish country side and just a five-minute walk from the house and absolutely ZERO OTHER PEOPLE here. Unseen. Only you and youtube are watching me. But even though we are allowed in this country I do not encourage anyone to go RC’ing in the public if there is a chance of being seen (and a risk of encouraging others). Please follow the laws, rules and guidelines of your own country and your own government. Stay safe, my friends.
Thank you for watching!
Subscribe here for future RC content: kzitem.info...
Check out Nordic Hobby Visions (secondary informal channel) with vlogs, updates, behind the scenes and more hobby related content: / @nordichobbyvisions719
See the video list in my channels for many more previous RC videos!
New videos every week!
Please comment and like ... if you like! Subscribe and "Ring the bell" to stay notified! Don't miss out! All support is greatly appreciated!
Happy Hobby Days and Keep 'em Running!
See you soon!
----------------------
For comparison:
Tamiya DT-02 Desert Gator vs DT-03 Neo Fighter Buggy: • Tamiya DT-03 Neo Fight...
Tamiya DT-03 Racing Fighter 16T Brushless: • Tamiya DT-03 Racing Fi...
Tamiya DT-02 Sand Viper 8T Brushless: • Tamiya DT-02 Sand Vipe...
Tamiya DT-01 'Grasshopper III' (Mad Bull): • Tamiya DT-01 'Grasshop...
This is a second hand DT-02 MS. The original wing was lost, but I painted and re-created a Tamiya Sand Viper wing with decals very close to the original (apart from the 'MS' sticker that is in italics on the original). I have re-built the entire kit and added some more hop-ups.
Apart from the standard Tamiya DT-02 Sand Viper parts, the 49475 assembly kit was supplied with:
- Tamiya 3x42 mm Hard Turnbuckle Shafts Hop-Up Option (OP-942/53942)
- Tamiya 3x46 mm Hard Turnbuckle Shafts Hop-Up Option (OP-943/53943)
- Tamiya DF-02 Universal Shafts Hop-Up Option (OP-791/53791)
- Tamiya DF-03 Aluminum Damper Set (53926) + white DT-02 MS springs
- Tamiya Steering Tie-Rod from Hop-Up Option OP-828 (53828)
- Tamiya DT-02 Limited Slip Ball Differential Set (53863)
- Tamiya DT-02 Aluminum Motor Heat Sink and Mount (53831)
- Tamiya Rear Large Dish Wheels (53881)
- Tamiya High-Torque Servo Saver
Full list (I think) of additional parts/hop-ups (for this particular unit):
- Tamiya TBLM-02S 10.5T (3370 kV) Brushless Motor
- Tamiya TBLE-01S Sensor Cable 16 cm
- Tamiya TFU-01 (Cooling fan for Tamiya Standard ESCs)
- Tamiya TBLE-02S (60A ESC for brushed/brushless motors)
- Tamiya 17T Steel Pinion Hop-Up Option (OP-1628/54628)
- Tamiya DT-02 Aluminium Servo Mount (OP-1397)
- Tamiya Dual Block Tires K Hop-Up Option (OP-1186/54186)
- Sanwa ERS-971 Digital Metal Gear Servo
- Sanwa RX-371W 2.4G 3-Channel Receiver
- 3Racing Aluminium Front C-Hubs (DT02-07/LB)
- 3Racing Front Knuckle Arms (DT02-06/LB)
- 3Racing Aluminium Front Bulk Head/Chassis Stiffener (DT02-11/LB)
- 3Racing Aluminium Front Bulk Head w/ Carbon Shock Tower (DT02-08/WO)
- 3Racing Aluminium Rear Hub Carrier/Knuckle Arms (DT02-02/LB)
- 3Racing Aluminium Rear Tower Mount w/ Carbon Shock Tower (DT02-09/WO)
- It is running on a 7.4v 2S LiPo Battery in this video.
You can also find more information about the DT-Buggies and a list if the DT-01/02/03 family in the previous Tamiya DT-01-02-03 project series. Here are the first three parts:
Part 1: Tamiya DT-01 Mad Bull • Tamiya DT-01/02/03 Pro...
Part 2: Tamiya DT-02 Sand Viper • Tamiya DT-01/02/03 Pro...
Part 3: Tamiya DT-03 Racing Fighter • Tamiya DT-01/02/03 Pro...
-----------------------------------------------
#NordicRCVisions Statement:
This video features homemade footage of my own #Tamiya #RcCars, the #TamiyaDT02ms #TamiyaDT02 from my personal RC collection. All rights reserved.
Негізгі бет Tamiya DT-02 MS Limited Edition 10.5T Sensored Brushless 2WD 1/10 Buggy!
Пікірлер: 77