Nooooooo! That pebble!!! Great test and video, but the expensive motors did only as good as the Sport Tuned. Interesting data! Fingers crossed for the next one! 😎👊👍
@coygtrc
Ай бұрын
Thanks 🤝 Yeah result was unexpected (but on par with RPM). And the tested Sport Tuned was a vintage one, far from new. Next run, most iconic Tamiya motor (and one of his "brother") 😁🤝
@Paul__FC
Ай бұрын
More and more people in this speed run. I really like the motor teating. Great work.
@coygtrc
Ай бұрын
Thanks 👍 The more the merrier 😁🤝
@RCBirds
Ай бұрын
Awesome I like your scientific aproach. Although the results might be not the ones you had hoped for. Best wishes for your next runs
@coygtrc
Ай бұрын
Thanks 🤝 Well, while more expensive, the Superstock ?Z are rebuildable (easier to clean, can change brushes and true the commutator). Also, they may be more suited for dirt track, than speedrun. I wonder what the RZ would do, but I don't have one. Next vid will be very vintage... with the most iconic Tamiya Motor... ever 😁🤝
@yodadarksideGreenHawksRC
Ай бұрын
Interesting...... I'm actually quite suprised by these results fella. The GT tuned was a little quicker than I was expecting, and the superstock a little slower! The GT tuned in my Avante 2011 is absolutely gutless, it was so slow I removed it after just one run. The Superstocks however are a firm favourite of mine, and I have many RZ, TZ, and BZ..... I was expecting closer to 30mph with the TZ in all honesty. I highly recommend changing out the bushes on each end of the rotor to proper bearings on the superstocks.... It's a fiddly job but well worth the effort. These motors run very hot stock, the bearings help keep them a bit cooler, more efficient, and give a slight speed increase to! Enjoyable upload mate. 😊 👍 👍 👍
@coygtrc
Ай бұрын
I'm with you. The GT Tuned was bland on the rpm bench, but performed better than expected. As for TZ, I was disappointed by the rpm, so much that I dug out the BZ and RPM were the same ( this almost eliminate a so-so ) motor 🤝
@coygtrc
Ай бұрын
Adding that I will probably add bearings in them. I was not impressed by them (1 in Super Astute, 1 in Egress) but let's not forget these are 23 turn... not 14x2-17x2 like we used for example in late 80's 🤪
@yodadarksideGreenHawksRC
Ай бұрын
@@coygtrc Bearings definitely help the overall efficiency and temp..... and I gained 1mph speed on average by fitting them. The RZ is the best of the three, slightly quicker than the BZ and TZ. Like you, I found the BZ and TZ equal. And yeah, I miss the sheer choice and variation of the eighties brushed motors for sure! 👍 👍 👍
@madmustangrc214
Ай бұрын
I cant say I have ever laughed at a crash but I did. Way to make it interesting and humorous. Great data to be us a later date for me.
@coygtrc
Ай бұрын
The bumps and pebbles have haunted me since the 2023 TT02 Poor Boys RC Speed Challenge 😫
@madmustangrc214
Ай бұрын
@@coygtrc Ioh I have had my fair share of spin outs crashes ect I feel for you.
@JoevsRc
Ай бұрын
Nice run! Looking good
@coygtrc
Ай бұрын
Thanks 🤝Soon, it will have to look "fast" 😁 Will you take part ?
@JoevsRc
Ай бұрын
@coygtrc I did dust off my holiday buggy. Hopefully, I can get a run-in. Where did you get that motor analyzer?
@coygtrc
Ай бұрын
@@JoevsRc Nice 👍 Got the dyno on Ebay but not common. Not the best as there's no torque value, but here, we want to be the fastest, not the most efficient around a track 😁
@UncleBobsRC
Ай бұрын
Well shit.... Sport Tuned motor just as fast as the Super Stock and half the price..... Great runs and this was a real eye opener... Time for the more exotic, vintage motors..... Bummer that it went belly up, I know how that feels.... Great runs and again, awesome dyno tests...
@coygtrc
Ай бұрын
We have to take into account that they are fully rebuildable, contrary to the Sport Tuned. Next run, most recognizable Tamiya Motor. We'll have to wait for the crazy motors 😁🤝
@UncleBobsRC
Ай бұрын
@@coygtrc Agree and was going to mention the fact that the brushes can be replaced and the motor is "serviceable" opposed to a "sealed" can motor... I am getting ready to add ball bearings into my BZ motor to see if I get any more performance over the bronze bushings, rumor has it you can get from 300 rpm to 800 rpm more (I need to double check this).
@coygtrc
Ай бұрын
I will probably add BB, too, in BZ and TZ. With the right tool, it's "easy". I'm a bit lazy these days and too many motors to prepare 😢
@UncleBobsRC
Ай бұрын
@@coygtrc I hear ya Gabe, can I call you Gabe or do you prefer Gabriel? A hair dryer to warm up the can at the output shaft end and they almost fall out, as for putting them in, (heat also) a wooden dowel 8.25mm really helps seat them back in, could use a brass or alloy punch too, the endbell is super easy..
@coygtrc
Ай бұрын
Gabe's fine 😁I used a Muchmore bearing removal tool (not Tamiya motor, but similar 23t type), without a sweat 😉
Пікірлер: 24