Dear new Tamiya CEO, Reissue a handful of vehicles, discontinue them for a number of years, Reissue a handful of them again, shatter the hearts of millions who think their o.g. tamiya vehicles are worth their weight in gold...🤠
@adamzwickl7665
3 ай бұрын
Also find a clip less body setup
@Yourfriendwasmagnificent
3 ай бұрын
A proper Ultra4 rig is missing. Spooled rear & centre diffs, unlocking / locking front diff and maybe a 2spd gearbox with a crawler ratio & go fast ratio.
@JThelen1031
3 ай бұрын
Licensed 2.2 tires and a fully machined premium crawler.
@Toodles77
3 ай бұрын
Wouldn’t that be the Ripper 2? Damn tease! Lol
@outcastrc8052
3 ай бұрын
Hey Josh! Thanks so very much for carrying on with the SNU each week! It is a wealth of information about our hobby and I am sure I am not the only person who looks forward to it each week! 🛻
@RS-sv3bl
3 ай бұрын
Me too!
@evintacy7272
3 ай бұрын
I second that! ❤❤❤ I enjoy scale news more than about anything! 😊 I’m huge Harley fan anyway haha 💯🤘🏻😛
@wikyWargaming
2 ай бұрын
As a hobby store employee, this is where I get the majority of my fresh RC info.
@martinsabathy3336
3 ай бұрын
A nice Chevy Silverado truck from the 90s... with some nice hard plastic details... Everybody in the world knows that truck but nobody gives it to us... and they have licenses...what a shame
@RCSHENANIGANS91
2 ай бұрын
The gmt400 body was awesome, would love a suburban/Tahoe too
@IowaBudgetRCBashers
3 ай бұрын
Hopefully the new Tamiya CEO means we finally get a rere falcon, and blazing blazer
@lacucaracha111111
3 ай бұрын
And maybe the Dyna series. The super astute meant most parts needed were allready there
@justinyoung109
3 ай бұрын
The Blazing Blazer, and really any of their 80's 4x4's need an update/rerelease yesterday.
@QuinnsRC
2 ай бұрын
Honestly, the biggest thing missing from this industry is standards: battery connectors, motor mount patterns, esc connectors. There should be standards for each scale, the same where possible. Would really improve the hobby for all the fans and the manufacturers.
@independentscalecrew
3 ай бұрын
We allways need new Hardbodys. Maybe some not Jeep, Rover, Toyota ones. 😅 And we need a universal Battery plug. One to rule the all. Like in the smartphone industry after years with usb-c. That would make things easier!
@allmightygreat1892
3 ай бұрын
Hard scale bodies painted.
@modernart86
3 ай бұрын
More licensed and scale and detail looking Toyota bodies and some Nissan bodies for crawlers in all scales.
@BlueDually4x4
3 ай бұрын
If anything is really missing it is more scale axles, transmissions and transfer cases. The Curry is cool and Yota axles be Yota axles, but there really isn't the one ton and up axles in the market. Dana 60s or 14 bolt GM, top load 2 1/2 ton Rockwells (I know RC4WD made one, but someone needs to make an actual bullet proof one. 4 or 6s with monster truck tires bullet proof.) Maybe some scale Atlas II or NP205 transfer cases. And more bodies. Yes licensing is a pain, but they don't have to make huge runs of less popular body styles. Everyone probably still has molds or pucks from older bodies they could do some runs on every once and a while.
@jamesjenik9591
3 ай бұрын
Honestly, I watched all of the bodies made for Drag Racing wheel base. To be honest, I would love to see some 10th scale bodies of vintage muscle cars with realistic details for the average 1/10 scale street RC. (Ie. 10" WB) I know there's company's out thee making Trans Am bodies, but they have a limited year range. I'd love to see a stock Vega or Ranchero. If they can make an Impala, why can't anyone make a Buick GS?
@michaelregan427
3 ай бұрын
Weird coverage of the Super Lasernut. They're definitely coming...they're just not here yet...lol. Losi and their cash grabs, it's just pathetic at this point. Recent flops the Hammer Rey, RZR, Lasernut. Beautiful bodies but high initial prices then they can't get rid of em lol.
@scalerockrc
3 ай бұрын
That Sparc Drive is really a cool idea and looks like a heck of a unit. Not sure its for any of my rigs, but its good to see innovation is still going. I think even more scale is what we could use, true scale transmissions, true scale axles (because theres way more axles than Toyota and Dana 44s), even a shiftable transfer case, scale NP205 or Dana 300 cases with high and low range, that might elimintate the slop in 2 speed transmissions *cough* RC4WD *cough*. I should edit, using the transfercase with a single speed transmission, not the transfer case fixing the 2 speed slop problem.
@Oilshock
3 ай бұрын
I want to see a couple things, First, some kind of unibody, but for specialized cars, basically scale models because I know it wont be for everyone. Second a realistic shock for crawlers, a shock that makes the body rock and move like a real vehicle. I know we have the SuperScale servo system. But that only works on a few cars and is quite expensive. I want something simple and universal. Last Flexible body mounts, for crawlers, this may not be ideal but for bashers I think it could really help the longevity of your body. Instead of a hard plastic body mount, it's a rubberized or flexible plastic. Removing stress from your lexan bodies making them last longer.
@proraptor4146
3 ай бұрын
Hopefully the new CEO will get Tamiya more up to date....none of their kits should come with bushings over bearings
@franku211rc
3 ай бұрын
What's missing..... Just bring back proline Mashers 2000
@JDHitchman
3 ай бұрын
I feel like a 2wd/4wd lockable on the fly transfer case is missing. I know the comp guys would have no interest in a 2wd/4wd transfer case much like I have no interest in dig.
@RC4X4
3 ай бұрын
Tamiya does it their way. It would be nice to see a scale crawler / trail truck form them. They made the first all metal truck back in the 80's and you would think being a plastic company they could make something. Heck even work from the Bruiser chassis and make it with plastic axles and a plastic transmission housing. I love all my Tamiya's and keep building them.
@Machinist_Chris
3 ай бұрын
Is Tamiya retiring because the finally ran out of Tamiya plugs? I think Traxxas has to get into the 1/6 crawler market, they have the x-maxx and xrt, just make a bigger crawler
@17madracki17
3 ай бұрын
Electric cutting breaks /drag break /front dig /rear dig/servo actuated hydro simulated leveling system. Why not adjustable wheel base from the tx. 😂 Where does it stop. Makes me think rc will be like 1:1 soon and will all be looking for a trail finder with single speed and leafs soon.
@Toodles77
3 ай бұрын
Surprised you didn’t mention the new direct drop in cage for the optic.i know ur not a huge fan of RC Speedy but this one looks really good. I’m actually currently building an R2 from them and the welds on the cage look just fine. Guess time will tell how good they really are. But man this one looks sooo good.im having a hard time controlling my urges to push that purchase button! But I think it would be a great Friday night build, no.
@zakubryan
3 ай бұрын
The community is missing standards, like battery plugs, motors, amd other plugs and even screw heads types
@AnyAssumptionBanter
3 ай бұрын
Lots are missing. RTR parts are being thrown away more and more. With more brushless parts coming all the electronics are going just as much as stock tires and wheels. That's a lot of waste and poor use of resources
@boduke9428
3 ай бұрын
As far as Losi not sending out Super Lasernuts to be tested. I'm not upset. I put a LOT more stock into reviews by channels that buy their own rigs to test. Unconscious bias exist. Even worse is those that would exaggerate positive or downplay negative in hopes of gaining favor or fear of getting cut off. If you pay attention while acknowledging your own possible bias you can tell who is testing free stuff most of the time even if they don't tell you.
@hotboyracing
3 ай бұрын
I think large scale like the scx6 are missing from the hobby I love mine more than my 1/10 crawlers but the h10 has me running that a lot now
@Crawl_az_rc
3 ай бұрын
I would like to see more Scale transmission options. A modular axle system with various widths and offsets for front and rear. A dig unit that could be adapted to fit most current transmissions. Lastly the buggy scene overtake sorrca as the preferred competition so more companies will support buggy builds with cool new innovative parts.
@CptnKapti
3 ай бұрын
What would you like to see in a scale transmission? Mostly looks or features? I have been wanting to build one myself.
@Crawl_az_rc
3 ай бұрын
@@CptnKapti both, performance and looks. Dig is a must
@mickd8188
3 ай бұрын
A Taunting Truck..a fart noise, tut tut tut.. or Whamp Whaa...! When it flips or rolls over.
@michaeltrilck5680
3 ай бұрын
Losi has stoppet his promo-campaine , because Vitavon isn‘t ready yet…😂
@chevyon37s
3 ай бұрын
snowmobile, and missing some good 2.2 MOA crawler kits and 2.2 tire options. Also I’d love a 5” 1.9 tire option.
@ares333x2
3 ай бұрын
I'm still waiting for a large-scale rip saw... Or any fast tracked vehicle
@killa-cotton
3 ай бұрын
I would hope Tamiyas young CEO will bring the brand into current times and still keep the reissues as I'm sure they're profitable.
@rickhunter1984
3 ай бұрын
6:10 i think traxxas did it out of respect for the company and the history it has made for it self.
@SipnRipRc
3 ай бұрын
🛻
@cjalden1976
3 ай бұрын
I would like to see a 6th scale buggy! “H6 Optic”
@njohnsonII
3 ай бұрын
You're going to hate this answer: Accessible axle leaf mounts are missing from the market place. I had to design and print my own. So it was a win for the fun of the project 😂.
@savagelife977
3 ай бұрын
A billet aluminum cage & axles for my H10
@adamargue999
3 ай бұрын
I need a cutting break for my XR-10
@cjboa
3 ай бұрын
🛻 there you go, a little truck emoji
@johngookinsable
3 ай бұрын
We need a 1/10 semi from Tamiya! Maybe with the new President?
@LorenB.
3 ай бұрын
Hex hardware, and bearings MIGHT happen, but they still have 854K back-stock of Tamiya plugs to include on the ESCs. 🛻
@guest6423
3 ай бұрын
What's missing is public spots to run RC. We need crawling places and some open dirt in more local parks. I'm not calling people sheep, but when folks see others doing something, they tend to want to do it too. I'd like to see hobbies normalized, rather than on the fringe. Getting RC out and in front of people would help do that. (and we don't need new models of RC cars. It's already overwhelming for folks new to it.)
@nikpinet2745
3 ай бұрын
Missing 2.2 and ultra 4. The market has gone full trail/comp trucks but the market is missing yeti style rigs, more 2.2 bomber style rigs. Rc4wd tried with the miller but that thing flopped. We need more quality 2.2 solid/ifs ultra4/trail rigs
@PonkyKong
3 ай бұрын
I'm thinking losi grave digger rear diff. Scx10.2 graphite chassis. And the front A arms from a rustler. Make a 2wd.
@justinyoung109
3 ай бұрын
I'll take a cheap, upgradeable Ultra4 rig that can fit off the shelf 1.9 tires and a stadium truck sized body yesterday
@allmightygreat1892
3 ай бұрын
Scale drivers are missing . Painted
@IowaBudgetRCBashers
3 ай бұрын
The modified makes more sense because it’s an open wheel modified stock car . Mud boss makes me think crawler or monster truck
@shaynejenkins446
3 ай бұрын
The mudboss class has been around for a long time.
@MrCaprinut
3 ай бұрын
I really want 1.7" street tires, basicly HPI Cup Racer tires with threads. Sometimes M chssis tires has too much sidewall, 1.9" too big and Cup Racer size is perfect. I do as many on road projects as off road..
@justinyoung109
3 ай бұрын
And make them licensed.
@GrimJerr
3 ай бұрын
Wasn't the Lasernut Losi's RYFT ? Nothing but problems, so by extension, Super Problems ? Curious in the way that people who go to auto racing for the crashes. 😆 It looks awesome, but you know what they say "Once burned twice shy".
@FYRC15
2 ай бұрын
I know what is missing, is a way for Spectrum to justify there prices now that the Radiomaster MT12 is out. Spectrum’s quality isn’t even half that of an MT12. I can’t even give my Spectrum equipment away.
@justinyoung109
3 ай бұрын
Damn the price, consequences, and whining from people dumb enough to put slicks on off road vehicles. I want that Sparc Drive tech adapted to my XXXT stadium truck. Or even an AE B7. I want to rip it around a paved clay "Off Road" track and watch people cry as this thing nails apexes, dust, and whatever nonsense track owners want to throw out there. Simply amazing tech and I want it to catch on outside of crawling. Second, Dear new Tamiya CEO, Please catch up with the RC drift community who have been buying your bodies for about 20 years, and make an MST level RC RWD drift chassis kit that doesn't have to be gutted out to work like the BT01. Also, please make a Juggernaut 3, a Clod Buster successor that looks scale, is durable and easy to maintain without using outdated 1980's tech that can go toe to toe with the Losi LMT. And a Bruiser/Mountaineer/Hilux that keeps all the charm but is less complicated and more in line with modern scale trucks and crawlers. Lastly, more licensed tires outside of crawing. I love Proline and JC and what they have done for the hobby but I can't buy their tires for my 1:1 ride at the Discount Tire. Real racing series, be it NASCAR, F1, Drifting, Champ Off road don't run nameless, generic tires from random companies that only us nerds would know or care about. PL and JC are really good at making compounds, and pricing them well. Time to start teaming up with 1:1 tire companies and bring them into RC racing. I want Goodyear/BFG/Pirelli/Hankook/whatever branded tires for stadium truck, Buggy, and SC. Ir racers and designers want to whine about cost then either nut up because that's motorsports, or sell out to people who care.
@philthyco1
3 ай бұрын
JIS is Japanese industrial standard.. it's really good hardware.. you just have to use the proper head.. people don't understand that Philips heads come in different sizes as well as JIS.. as far as bearings go.. Tamiya rntry level kits are meant to be "hopped up" that's the whole point.
@bbeckers24
2 ай бұрын
Interestingly enough, Salvas Mudboss has a Trademark filed June 21, 2024, that is now live. And it was pretty shitty of Traxxass to do what they did. Salvas tried to get Traxxass involved to work on the prject together, but Traxxass decided they could do it without them and cut them out. I know why, but it's quite annoying to see Traxxass continually defended. I highly doubt Traxxass willingly gave up the name and had to rebrand this product.
@LosiRacing
2 ай бұрын
funny story as to why influencer samples werent sent.... :)
@QuinnsRC
2 ай бұрын
I got the feeling that LOSI was gun-shy to promote the Super Lasernut fully because the original was such a poop-show in terms of reliability. Maybe they want to let the early adopters/influencers have a go at it, then once the reliability shakes out, do a media blitz. Tank turn ability is great for.....tanks....hope they come greased...
@jerryvolpini7987
3 ай бұрын
Good stuff, as always, Josh! Not holding out much hope that Tamiya will change any. At least, it can't get any worse, right? 😉 Btw, welcome to the radio wars, Spektrum, could you be any later to the game?! I mean, unless this thing comes in significantly below the offerings from Futaba and Sanwa, they're just kidding themselves!
@philthyco1
3 ай бұрын
Panda hobby are a company from so cal.. their 18th scale stuff is their own design.. I think they're 24th scale stuff is a rebrand tho
@cherokee1995
3 ай бұрын
What's missing? Axles with leaf mounts not made by RC3WD. As in we need axels with leaf mounts, Josh. F10TL. See, I even gave you a name for them.
@glennhobbs59
3 ай бұрын
The Mud Boss Body is a copy of a North East Dirt Modified race car. And the traxxas one is a copy of a IMCA Dirt Modified car.
@shaynejenkins446
3 ай бұрын
close but no cigar. What traxxass put out is just a lexan mod body on a slash. The mudboss has reworked suspension.
@glennhobbs59
3 ай бұрын
@@shaynejenkins446 I know the mud boss is a modified body that mounts to the2wd slash
@Toodles77
3 ай бұрын
Apparently we need more manufacturers of extended driveshafts that are not cut to length! The few that do sell them, do not have em or all the parts to complete a set. Seriously ridiculous…finally ordered cut to lengths from Dlux, and one of em is bent like WTF! I coulda bought another rig for what I have into finding a matching set. The incisions are just short, my luck! Any suggestions? Goin in custom Capra with Vanquish 3gear and dig unit. Thanks dude, don’t ever quit doing these news segments, we would be lost!
@christopherherrington1694
3 ай бұрын
Give us the TLT-1 re-release 😢
@MrSneakyGunz
3 ай бұрын
My my! 30% ads, or nearly the first 5 minutes.
@strech5412
3 ай бұрын
What’s Missing in RC? A Double Deck Trailer! I want to tow my 4wd and 2wd Buggies with my Crawler together! I called RC4WD and asked if they’d make one, they said no :(
@SengLeeKoh
3 ай бұрын
nah, I think whoever is interested roughly knows what to expect of the the lasernut from its smaller brother; losi knows this, and also forecasts general market demand for their large scale rtrs (e.g. Super Rock Rey , Baja Rey, thus they probably conclude extra marketing costs would not even cover whatever extra lasernut sales
@Anthony_underscore
3 ай бұрын
We're missing a leaf-sprung 1/24
@chrisgibbs9218
3 ай бұрын
Losi/TLr have been going down hill for awhile now. They have discontinued all short course trucks but the drag car, but most places have the 22s on either discount or out of stock. I think after the dirt bike flop the company is in trouble
@rcjeepguy3560
3 ай бұрын
What's wrong Josh something wrong with you? Sounded like you were reading from a script. Just concerned
@rickhunter1984
3 ай бұрын
12:50 sounds like it has a steering detector for the unlocking
@HarleyDesignsInc
3 ай бұрын
It uses the PWM signal from the RX to modulate the amount of vectoring.
@toddanderson1506
3 ай бұрын
Hi Josh, I appreciate the scale news update. It is a great source of information each week. I don't have a suggestion for tech but I do have a suggestion for a website that is needed in the RC community. It would be great to have a site to go to find and sort RC tires by all of the parameters. Brand, inner diameter, most importantly outer diameter, width, compound, reviews, web links, etc. It would make shopping for tires a lot easier. Does a site like this already exist?
@Legoman585
3 ай бұрын
I think we’re still missing a good IFS system for crawlers/trail trucks. Don’t say element ifs2 because it’s just not
@Sysiphos
3 ай бұрын
From what I know about how japanese businesses operate, new boss is actually a huge chance for things to change. Sparc Drive axles seem interesting, they'll make about a dozen people really happy. What I'm missing is more options for smaller scale brushless crawler motors and a more premium 1/12th scale crawler
@TheImtoomuch
2 ай бұрын
Now the Salivas bois can stop crying about Traxxas using the MUDboss name.
@alans4281
3 ай бұрын
Fingers crossed Tamiya rc development gets a good shake up. It seems like they dropped the ball about 20 years ago and have been living in the past. BBS is the exception sure.
@SamBalducci
3 ай бұрын
Japanese businesses especially those who simply transition within the same family do not change. They will remain the same. They could go another 100 yrs and not change. Tamiya probably needs to change but they never will.
@mattydeanwtf
3 ай бұрын
A Fpv rock crawler from vanquish or fpv crawler comps with on track spotters … it works so well… especially as a winch comp… the spotter runs the winch line and the driver still controls it… we did it with mobile phones and a big screen tv but fpv would be heaps better 👍👍
@walthersonr.c.3360
3 ай бұрын
Oh Josh, love your channel. I love the news you report for the whole hobby the mud boss should’ve just been called a dirt oval car as we know there are lots of types of them, because that’s what it is ! My brother keep reporting all the news ,and updates
@aegixxer1
3 ай бұрын
I bet the Super LaserNut was some kind of contract fulfillment for the licensing.
@Ayrton_Groesbeck
3 ай бұрын
The sparc drive idea is super cool, but I don't think its really worth it in this scale. However, the idea to have it in a fully independent suspension crawler would be something I'd be way more interested in.
@arthopfer
3 ай бұрын
They probably changed the name for the people who aren’t super into rc and know of a mudboss class and were trying to run the car through mud like it’s a sling king.
@SingleSpeedRC
3 ай бұрын
Looking for more all in one motors. The fusions are awesome but I want to see more options and brands in that market. I wonder how many people's Alexa's just ordered razors btw...😂😂😂
@williamsaloka9043
2 ай бұрын
Nothing will change with Tamiya. It's all about the "bottom line", as with everything.
@mikeabner9581
3 ай бұрын
Let's hope that the Super Lasernut is much improved over the original Lasernut. The first one was an absolute turd.
@PetrolJunkie
3 ай бұрын
Y s welder is a great hobby machine. Cheap, but not a cheaply made machine. Lots of features you have to pay attention to least twice as much for in a Hobart or another big brand.
@jackschumacher8472
3 ай бұрын
Something is wish for rc new tech. Futaba muilti channel system that is easy to use and setup.😂😂😂😂
@HollerRC
2 ай бұрын
The sparc drive would have made more sense if it wasn’t on element axles. Element axles don’t need outside help making tight turns.
@DeadnCold
3 ай бұрын
Hub motors. That is the tech that is missing from surface RC. Can you imagine a comp crawler with a motor at each wheel. You could adjust your speed ratio and breaking for each wheel on the fly. You could make that torque vectoring axle setup obsolete with simple electronic controls. Not to mention the weight distribution. No more motor or gearbox up high, it would even be better than a MoA. And the ground clearance, no pumpkin to get in the way, just a solid bar as an axle. Hell, you could even curve the rear axle to get all the rear clearance you want.
@allmightygreat1892
3 ай бұрын
Liked you conversions of traxxas slash. That would be fun to have kits.
@paulsauceda3667
3 ай бұрын
Thanks Josh for about 2yrs I would wake up and be the first to watch these videos. I was addicted to be first view lol I have screenshot from all of them lol
@DDMSteveB
3 ай бұрын
Josh: ‘that’s it for the spektrum radio - we will see what it is in a couple weeks unless tower leaks it before’
@duvalpirate904
3 ай бұрын
Radio feed back to provide a steering and throttle feel
@HarleyDesignsInc
3 ай бұрын
Ive never heard someone suggest this, but I love it. What a rad idea, just like we have in sim racing.
@freyjaslittlejeeps1602
3 ай бұрын
Shouldn't be too hard to implement, since we already have a data stream coming back from the receiver. Could be done with accelerometers. However, it would take new firmware on the receiver or a module that can talk in the right language to get the accelerometer data into the telemetry stream, and a module that accepts the data and interprets it into commands for feedback servos on the wheel and trigger. The actual implementation is over my head, though. I just make light boards :P
@HarleyDesignsInc
3 ай бұрын
It could even be simplified to just a load sensing of the amperage pulled through the servo. Would be easy to do that way and it would just be basic telemetry to the radio. I don’t know the sampling rate of the radio telemetry which could be the only big issue.
@freyjaslittlejeeps1602
3 ай бұрын
@@HarleyDesignsInc That could work. There are already current sensors for a few radios, though I don't know which ones. I'm sure someone that knows more about it than me could figure out a way to implement it in EdgeTX for the MT12. Then it would just need a servo in the radio to add force to the wheel and a microcontroller to contol it.
@brandongeiger1684
3 ай бұрын
Whats missing is true 1/10 scale models so my Nissan hardbody is really half the size of my Chevrolet we have all the links to accommodate why not
@PetrolJunkie
3 ай бұрын
I think the name change happened because pretty much everyone agreed that it shouldn’t run in the Mudboss class. As far as spec racing is concerned it does fit better in the Mod class, with some mods.
@allmightygreat1892
3 ай бұрын
Scx24 chassis plate floor pans and wheel wells. Scale interior 10 scale and 24 scale.
@justinomarino
3 ай бұрын
What is missing? Front and rear dig along with disengagement of front and rear axles. So a VFD twin that replaces the second overdrive stage with dig.
@dirtberger4533
2 ай бұрын
You faded away at the end, I don't think I saw that before? What's missing in RC is me..
@idworkhard
3 ай бұрын
We need an FPV that can simulate actual head turning and driving. I know it's out there in the shadows but we need it mainstream.
@jeremyrobert413
2 ай бұрын
I would like to see an app from my charger to my phone to show how much longer till the battery is fully charged
@JibaroCZ4A
3 ай бұрын
Yay nepotism :/ can’t wait for the next TT03
@allmightygreat1892
3 ай бұрын
Whats missing All tracks in northern il on road and off road all closed. Nearest tracks are 2 hour drive.
@RCSHENANIGANS91
2 ай бұрын
Tamiya has the name and the manufacturing ability to be a big player in the rc world
@JimmyB55
3 ай бұрын
🚚 🛻 🚛 🚒
@justinm1150
3 ай бұрын
sounds like spectrum is loosing to radio master but bout guarantee spectrum wont even be close to their price
Пікірлер: 237