That's one of the smartest rc trucks around fair play
@gozone
2 жыл бұрын
Thanks ;)
@reazforhad7955
2 жыл бұрын
Qqq
@brokencartoys2340
2 жыл бұрын
Keren
@mskim641
3 жыл бұрын
How do I set up a full axle sound in about 1 minute and 22 seconds? The motor is stopped.
@gozone
2 жыл бұрын
This ESC features a sort of "neutral gear", to allow the sound to "rev up" without the motor spinning.. :)
@jlast450
5 жыл бұрын
How does this system compare with Tamiya MFC 3? Does this unit have a vibration motor like the MFC? do these electronics work with Tamiya trailer light set and motorized support legs?
@gozone
5 жыл бұрын
Jake Last The Servonaut-electronics are superior to Tamiyas in every way. No vibration, and lights and so on meeds to be made to match, as the outputs on the system equals the input, so seperate resistors are required, size depending on your voltage..
@jlast450
5 жыл бұрын
@@gozone I see. Thanks for the info. So those Lights that will fit the Tamiya trucks and trailers are available separately through Servonaut? What about the motorized support legs for the trailers?
@gozone
5 жыл бұрын
Jake Last No, you must wire up all the lights by yourself. 😊 I suppose the supportlegs could be controlled through a seperate unit, but not by the M20+ itself.
@jlast450
5 жыл бұрын
@@gozone Hey thanks for the info. Looks like am gonna use the Servonaut electronics on my next Tamiya truck. Do you know if servonaut makes a unit for the motorized support legs? I can't find any info on their website. Thanks for the advice
@gozone
3 жыл бұрын
@@jlast450 Servonaut also makes small modules for powering different kinds of accessories, so maybe one of these can be used for motorized support legs. :)
@mskim641
3 жыл бұрын
How can I set it to make only the accelerator sound? Motor is shut off. 1:22~
@gozone
3 жыл бұрын
This ESC allows for the engine-sound to be "revved up" without the vehicle moving, as the forward/reverse and neutral "gears" can be selected via one of the sticks on the remote.. (It´s a bit hard to explain, but if you try to look up the manual for the Servonaut M20? esc online, it explains it better..) :)
@user-xx8ie9sb7e
5 жыл бұрын
Hi there would you help me set this all up please
@gozone
5 жыл бұрын
B There are good manuals along with the electronics. 😊
@djimavicmini1009
4 жыл бұрын
how can I buy?
@Chandi985.
3 жыл бұрын
How much
@sureshsureshk2441
2 жыл бұрын
Price
@RcFlashlight
2 жыл бұрын
Where do I buy Servonaut electronics? I live in the US.
@gozone
2 жыл бұрын
Sorry, I have no idea?. Try to contact the company, and maybe they can provide further information about dealers over there. 😊👍
@garyellis5401
5 жыл бұрын
Hi where did you get the reversing lights for back of cab and the step wells? Cheers
@gozone
5 жыл бұрын
Hi Gary. They are homemade from 5 mm squares, cut out of polystyrene, then I drilled a 3 mm hole for the LED, and used a "pyramid"-drill to make a concave reflector-like surface, to paint in silver color. :) Hope this helps?. :)
@garyellis5401
5 жыл бұрын
Thanks gozone there really effective
@HoaPham-nd5km
2 жыл бұрын
Có bán ko anh
@teeyungfan4654
5 жыл бұрын
May I know what type of the sound unit you use.?
@gozone
5 жыл бұрын
Hi Tee.. Yes, of course.. It´s a Servonaut SMX sound module, coupled to a Servonaut M20+ speed and light controller..
Пікірлер: 37