I have a 2000 CR-V and it's white. This needs to be re-released
@j.r4985
Жыл бұрын
It’s actually nuts what the RD1 CRV is capable of off-road. I’ve got a 2000 in electron blue pearl. 226k miles and runs like a top and I’ve driven it down trails I’ve had no business being on. Good tires are crucial. But yeah the thing just plows through mud and snow. Saw this thumbnail and got excited but that’s too bad they haven’t released it because these RD1s are starting to become classic little rigs that are both surprisingly capable and reliable
@LockRockRCs
Жыл бұрын
I've been hunting one for quite a while to. I have a real one. 2001, lifted, 4x4, tons of mods, and no rust. My kid built it for me from Arizona. I think I have you on messenger. If so I'll show you some pics. And 2 odd factory options were picnic table in the back and front n back seats turn into a bed for camping.
@rivierarc
Жыл бұрын
I was lucky to pick up a new in box kit.... can't wait to build it. Not sure what colour it will be though.
@brianargo1659
Жыл бұрын
Put it on a LCG carbon chassis and make a wicked crawler not trail if it could be done without hacking that body up. Or I'm also with u on slamming it and letting it lay frame. And giving it some wicked 90's lowrider magazine paint job. U could get some of those press on tats that u use to apply with a wet rag to the skin, with some skulls or some kind of wicked jester or MidEvil pics. Stick that into the paint job it would look like a scaled down airbrush job. As long as u got the kind that looks like it was drawn with a pencil or just tatted in straight black ink👍 Then go over it and ur paint with a coat of clear and it would never pill on u. Just another though 👍
@1622_SCALE_DIVISION
Жыл бұрын
Beautiful, I so want a CRV body for my cc01 touareg 😁
@anibalbabilonia1867
Жыл бұрын
That platform suv was based on the civic chassis, modified to hold a rear independent axle to make it all wheel drive. Or 4x4 as they called! Plus Honda put larger tires and lifted the suspension bits to make it more like an suv. But they did also came as a front drive suv too! Now that Tamiya Honda CR-V would look better with all wheel drive independent suspension! Too bad they didn’t do it that way from the start! It would have made it more realistic and authentic. Nice find though! I think you can do something with that one!👌😎👍by the way! That other chassis you tried with the independent suspension and lowered, I think would look great! Looking forward to seeing what you have planned for it!😎👍
@paulmcnamara16
Жыл бұрын
Fitted a Blackfoot body to my CC01 with cheap 1.55 steel beadlocks/sand blaster tyres quick paint job and ta dah it's a Ford ranger replica
@KearSki
Жыл бұрын
My god. It exists. It's not just a fever dream. I'd love to have a 2nd gen facelift CR-V body to do something stupid with, as my mother has a 1:1 version and it's a comfy car. But funnily I see huge amounts of super plain CR-Vs of very generation up here in montana, 90% AWD ones. Only FWD one I see often is my mom's. Of course I do wonder if someone could make a mold of the body so reproductions could be made at somepoint, as I do doubt Tamiya would ever re-release these.
@dmedford5
Жыл бұрын
Put it on a MST CMX chassis same wheelbase...i think they even sell 3D printed mounts just for the Tamiya bodies to mount to the MST chassis. 1.55 wheels and tires and repaint.
@3dman875
Жыл бұрын
Very nice looking great video today
@cool.stuffs
Жыл бұрын
I always look for these. I haul my rc's around in a lifted awd crv and want this one so bad. Bring it uste so I can convince you to sell it to me 😁
@RattrapRC
Жыл бұрын
Very cool, there’s like a 100 of those in my neighborhood lol. 1:1 of course
@craigpimlott204
Жыл бұрын
I run a tamiya Blackfoot body on the Mo6 chassis with the mini lite wheels .looks great, it already looks lowered so no messing around .
@capturetoday67
Жыл бұрын
Too cool. I say drop it and have fun with it!
@jonathandishman9593
Жыл бұрын
In regards to the stickers you can get a pretty good scan of that sheet from tamiyabase and you should be able to print it out onto clear sticker sheet which i think is available in different thicknesses at hobby lobby and you can adjust the size until it fits in google docs. These stickers aren't at all water resistant so you either need to clearcoat or put a second layer of the sheet over the top.
@Miguell136RC
Жыл бұрын
Nice video Bro 👌💯😉
@mikeupton5406
Жыл бұрын
IT'S TAMIYA TIIIME!! I would just leave on the chassis you have it sitting on at the end of the vid. Looked perfect. I really wouldn't do anything to it at all. Before you touch the decals make sure to get good pictures. Could match the colors, make a stencil or two and practice some airbrush magic. Maybe one of the companies that make decals for the R/C aircraft could help. You might want to reach out to Gavin at R/C kicks. Maybe someone who has a good laser printer? On that MST Drag Honda project, I was wondering what you thought about the gearbox in MST chassis. I have one going to build rear axel drive and have Tamiya Karmann ghia body. I just wonder if that MST gearbox could take a hit at all.
@RCeveryday
Жыл бұрын
I havent done anything with the drag chassis mst. But cody at dixieland rc built one that was the inspiration for that project and I have seen it run head to head with slash drag cars and the like. He had nothing bad to say about the setup on that chassis and gearbox.
@Jeepy84
Жыл бұрын
Strip it down, sand prime and paint. Instead of the factory decals I would find someone willing to print your own design or cricut it perhaps. What tape are you using that is failing? Yellow Frog Tape is my new go to, along with Tamiya 8717x masking tapes. The black on the bumpers and the rocker decals seem to be the only real sacrifices to redo it.
@coreyhalverson2126
Жыл бұрын
They were essentially Civics not accords and were the evolution of the Honda Civic Shuttle or Wagovan.
@BullgearRCvideos
Жыл бұрын
Go to woman's beauty supply and get some hydrogen peroxide jell and cover yellow plastic and let it sit in the sun for a day, or a uv light if you have one and it will turn it back white👍
@nitramalugyr6085
Жыл бұрын
There's a sticker set on ebay now!
@mattmiller8072
Жыл бұрын
Go to a shop that makes vinyl decals and they can probably reproduce the stickers for you
@jayess397
Жыл бұрын
MCI Racing have repro CR-V stickers (decals). $22 Canadian
@jackerlandsson1626
Жыл бұрын
I have a jpeg image of the entire sheet of stickers that you could perhaps use to get a new one printed in a shop that can print such things?
@crxpablos
Жыл бұрын
Paint it Celestial blue or Tahiti green, both Honda colours
@zacharyord8618
Жыл бұрын
Ugh I want one to match my rd1 crv so bad!!!!!
@brianargo1659
Жыл бұрын
Could Ampro 3-D print u some clear lenses for the back that u could paint up urself? I'm sure he would do it for nothing just because he loves the old and unusual RC's from back in the day. if u went to his KZitem channel and showed him what u got. He would probably make u some front light buckets as well. And as far as the decals on the sides have u tried that popular company? That all the tamiya guys use for their decals. I'm sorry but the name of that company escapes my thoughts right now. Or if u know someone with a cricket machine? I know u can find those complete cricket machines cheap on marketplace or eBay. For around $100-150 u hook a computer up to it and as long as u have the sticky paper u can make as many of whatever u want. They're definitely worth the investment if u r deep into the hobby. And decals and stickers is not all they can do. U can do Tshirts, hats, really anything u can think of u can customize 👍 it's just a thought. Sorry this comment was so long. But cool rig, and video
@sloppycscustoms2725
Жыл бұрын
🤙🏻🍕 GO CRAZY!!! 🤙🏻🍕
@mrforeman7443
Жыл бұрын
Great review 👏. I have the same 2 decal sheets on my watchlist too but can't justify the price . I also have a crv body and have thought about making a mould from it as my friend Keith at kamtec has moulded a couple of shells from my own moulds. This could give us some options like your tuner option which I'd love to replicate after seeing this . Thoughts guys ?
@RCeveryday
Жыл бұрын
That would be a nice option. There are quite a lot of repop stickers out there I have found thanks to viewers sending me links. Have some coming for my amigo as a test to see how nice they are.
@mrforeman7443
Жыл бұрын
@@RCeveryday thanks for your reply, I'll follow you on insta and keep you posted on the crv body . I'm currently sanding the old paint off and then I'll prime it which will be enough to take a mould from it . Glad to have found your channel, new sub .
@RCeveryday
Жыл бұрын
Thank you sir!
@mrforeman7443
Жыл бұрын
@@RCeveryday you probably know but I've just found mci do the crv decals, 22cad. Happy holidays.
@sir2honda
Жыл бұрын
*yet (hopefully lol)
@daz1975ify
Жыл бұрын
Leave it on the cc01 lower it with that style of wheel.
@kingnorlen
Жыл бұрын
How's the fwd drag mst civic build going? Is it forgotten? :p
@RCeveryday
Жыл бұрын
I used that body on my air ride build, the chassis is waiting on new motivation.
@kingnorlen
Жыл бұрын
@@RCeveryday Got it, would be cool to see it built and with maybe a new body ^_^ ABC Hobby Integra Type R or smth :D
@jassmandidgeridoo
Жыл бұрын
What size scale do you used for the engines in your rat rodes
@RCeveryday
Жыл бұрын
they are around 1/8 to 1/10 scale. Nothing is ever exact and ive found most things 1/8 scale work with 1/10 rc
@jassmandidgeridoo
Жыл бұрын
Thanks
@Axx62864
Жыл бұрын
my rc can is not tiring on
@Axx62864
Жыл бұрын
what do I do
@RCJesus420
Жыл бұрын
Slam it. I doubt more than 1% of CRVs in real life have ever even seen a dirt road. lol
@j.r4985
Жыл бұрын
Mine has! You’d be super surprised what the AWDs can do off-road. It’s on par with Subaru. I’ve had both an Outback and have an RD1 now. Done stupid s*^% in both and wondered how they managed to not get stuck. It’s a blast
Пікірлер: 47