Like your videos....but I find it hard to see details. This was a dark one. Might try some kind of lighting to brighten things up
@JTitor
Жыл бұрын
What all did you need for this?
@filipnorelius6667
3 жыл бұрын
I'm thinking about getting the same setup, plateholder and rear turn signals. Do you have to cut any wires on the bike? Or is it just plug n play?
@marciiileon8357
3 жыл бұрын
Can you please make a video of the handlebars? I also have an Indian FTR and I am very curious to see how it will look like. Nice Videos 👍🏻
@MOTOMARVELOUS
3 жыл бұрын
I already have 🤘 kzitem.info/news/bejne/lKClrKB4mIaGe3Y
@CourtDaddi
Жыл бұрын
I like the Tank Machine Integrated Rear Turn Signal Kit for my 2023 Indian FTR 1200 but I have a few questions about how you hide the wires to the harness. Did you route the wires up and under the seat? or down underneath the frame next to the gas take? or did you replace the hex socket seat bolt with a hollow hex thru-bolt? or did you drill a new hole in the subframe? I just want to know how to hide the wires before I purchased this item.
@jamespolucha6911
3 жыл бұрын
Can we get this in the USA
@MOTOMARVELOUS
3 жыл бұрын
Just go to Tank Machine’s own website 🤘
@damienford01
Жыл бұрын
Are there any instructions on how to wire in the turn signals. Wiring looks confusing with no instructions from tank machine. Thanks
@jacquelinecalhoun9676
9 күн бұрын
Allen Betty Moore Sarah Robinson Robert
@kelleyheiland5863
Жыл бұрын
Mr Marvelous,,, curious what handlebar you decided to go with . Thanks
@joeyklure5340
3 жыл бұрын
I’d personally rather strap the plate to my bike rather than have any arm sticking out behind the tire, completely ruins the lines of the bike but I was un aware of the restrictions in other countries 😓
@MotomojoFL
3 жыл бұрын
Awesome cinematography! Keep it up!
@kelleyheiland5863
3 жыл бұрын
Hi Marvelous . I have the number plates that mount with brackets directly under the grab handle holes on my Rally . Would these blinkers fit and still leave the lower bracket mounting holes exposed . Thanks
@MOTOMARVELOUS
3 жыл бұрын
Hi Kelley, i do belive so. But just in case, send Tank Machine an email to hear them out :)
@albert345ful
3 жыл бұрын
Drop the link so I can buy!!🔥
@Pelusaa-D10
3 жыл бұрын
We want to see more pal ! Big hug from New Zealand
@jean-lucbaert1559
2 жыл бұрын
Hello, does the licence plate protect enough from the rain? Very nice videos for the ftr 👍👍👍. Thanks
@TheSar
3 жыл бұрын
Just put my order in for a 2022 Carbon after a test ride. Oh yeah.
@KnuckleHead5362
3 жыл бұрын
Who made the muffler?
@MOTOMARVELOUS
3 жыл бұрын
Jekill & Hyde :)
@patriklyder8465
3 жыл бұрын
Kan du ikke lave før og efter billeder ved siden af hinanden eller hvor man klipper mellem før og efter, så det er tydligt at se forskellen?
@stefanwedege2381
3 жыл бұрын
Den er SÅ sprød din cykel. Jeg håber virkelig at få lov at se den live en dag. Så langt er der trods alt heller ikke mellem København og Slangerup 🙂 Tak for endnu en fed video.
@dennisstengaard259
3 жыл бұрын
Men har du afstand nok mellem dine blink i forhold til dansk lovgivning? Men fedt ser det ud
@LordMaraTHBD
3 жыл бұрын
Lovely clever clean stylish parts ✌😉👌Tak Tak!
@royxrp1510
3 жыл бұрын
Man this is such a rad bike! I recently sold my Harley to save up for an ftr. But the market here in Holland at the moment only offers the newest models and they are so expensive. Guess I have to wait another year, maybe two. And just wait untill the occasion market opens up on these puppies 😣
@puffdaddyfpv7046
3 жыл бұрын
Don’t do it man… Koop een Hondayamasaki, dan snatch ik die FTR😂
@Houseof900
3 жыл бұрын
Thank you! Huge improvement over the stock setup!
@zackarybrown6752
3 жыл бұрын
Very nice it rally does clean up the bike. I always really enjoy your B roll shots. FYI agility is pronounced like ajility with j instead of a g sound. Great video glad to see more content from you!
@MOTOMARVELOUS
3 жыл бұрын
Thanks a lot man 🙏 Haha - Will not do that anymore 😂
@montalvoandres
3 жыл бұрын
Totally Totally plate holder is wicked! And those lights, what an awesome slick design! Well done mate! 👏cheers broi
@MOTOMARVELOUS
3 жыл бұрын
Thanks a lot man ☀️ It really suits the FTR for sure 🤘
@fxrst_anvers6976
3 жыл бұрын
Perfection👌🏻
@stanleylawson9015
3 жыл бұрын
awesome
@pukhoj
3 жыл бұрын
Looks super dope!! Er need to see a vid In daylight where you show off your Bike!
@MOTOMARVELOUS
3 жыл бұрын
Let’s hope to meet each other in person at a event here in DK when it’s possible again 🙏☀️
@pukhoj
3 жыл бұрын
For sure!!! Jeppay is arranging meetups sometimes... just do The same... er need some fun on Zealand aswell
@TheUrbanEpicure
2 жыл бұрын
Tank Machine license plate holder still looks like crap. Should've gone with a side-mounted one. Thumbs-down on another one of your videos :)
@MOTOMARVELOUS
2 жыл бұрын
Side mounted plate holder is illegal in Denmark... But hey, thanks for your comment, it did good for my algorithm despite you thumbs- down ;)
@illfaptothis333
3 жыл бұрын
bruh we could use way more shots of the bike after all your hard work.... but looks great
Пікірлер: 40