Datsun 240Z S3E31 - Datsun 240Z Tanks Inc PA4 universal pump install- no welding!
SUMMARY
This 240Z in tank fuel pump installation used the Tanks Inc PA4 kit. It is part of my WhitleyTune sports injection ITB EFI conversation to my L28 stroker motor.
The standard Tanks Inc universal EFI in tank pump orientates the pump vertically giving a limitation of 150mm minimum tank depth. As part of my installation I wanted to locate the pump in the shallow end of the tank under the spare wheel well. This part of the tank was only 120mm.
To get past the shallow depth I used a different fuel pump strainer to orientate the fuel pump in a horizontal position. This required some modification to the tray to fit through the hole cut in the tank.
The remaining installation is much the same as in the Tanks Inc installation instructions.
**LINKS**
Instagram: / built_on_purpose
Facebook: / builtonpurpose1
Patreon: / builtonpurpose
Podcast: podcasters.spotify.com/pod/sh...
Shop: kyushaspeed.com.au/
CHAPTERS
0:00 Intro
0:51 EFI swap to WhitleyTune sports injection
1:34 In tank pump philosophy
3:06 Magic super special fuel strainer
4:15 The assembled unit
4:46 Installation tutorial
10:02 Outro
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DISCLAIMER: I am not a mechanic or tuner. This video is for entertainment purposes only and is not to be used an instruction or a guide for your own activities. Copying modifications described in this video is at your own risk.
DISCLOSURE: From time to time I will provide a link to a product I regularly use or think you might find helpful. Some products may be part of an affiliate program and this will normally be clearly explained in the video. Purchasing a product from one of these links provides a small amount of income and is a means to support the channel.
#240Z #fairladyz #datsun
Негізгі бет Автокөліктер мен көлік құралдары Tanks Inc PA4 universal in tank EFI pump kit in a 240Z - no welding!
Пікірлер: 52