Shinwa Chalk Line - amzn.to/3745GU3 Strapping Tape - amzn.to/30zDOCX Tape Dispensing Gun - amzn.to/3iwaCCQ Titebond III Wood Glue - amzn.to/3jwyvMa
@billcarter6984
3 жыл бұрын
I saw you using a red saw on a festool track-what kind of saw is that
@jamircoen649
3 жыл бұрын
You all probably dont give a damn but does anybody know a tool to get back into an instagram account? I stupidly forgot the account password. I would love any help you can give me.
@milanachilles5642
3 жыл бұрын
@Jamir Coen Instablaster ;)
@jamircoen649
3 жыл бұрын
@Milan Achilles i really appreciate your reply. I found the site thru google and im in the hacking process now. Takes a while so I will get back to you later with my results.
@jamircoen649
3 жыл бұрын
@Milan Achilles It worked and I now got access to my account again. I'm so happy:D Thank you so much, you saved my account !
@5minprojects817
3 жыл бұрын
Said it before and I'll say it again, Arguable the BEST carpentry channel on the planet.
@solowfrful
3 жыл бұрын
If you put the tape length wise as you did, then add tape across the 3 or 4 pieces, the tape length wise will contain the glue while the tape running across the 3 pieces will hold the miters together. We use to do it your way in the beginning, but quickly learned that the additional tape gave the assembly more strength to force the glue into the grain as well as up the joint to the interior.
@jamescooper1154
Жыл бұрын
Great idea. Never saw that before
@czapskibusinessgroup
Жыл бұрын
I just sid a test piece for this exact method with maple plywood. It does seem to take a slight amount of the veneer off when you pull the tape but a quick sand seemed to make it all good.
@dalekuen6402
2 жыл бұрын
Spencer, I tried this for the first time today after seeing this video about a year ago. I will never do another mitered box post or Beam any other way. I was real nervous to try it but it came out looking super clean, going to install tomorrow. Thank you for all the effort you put into your work and thank you for sharing your knowledge.
@turbinepower77
3 жыл бұрын
Retired finish carpenter. I've used that method many times on beams, pole wraps and newel posts.
@OliviasAvenunue
3 жыл бұрын
This channel is amazing with the massive amount of information and techniques on carpentry. I am a DIYer, and this has made remodeling projects so easy, and I keep watching these videos over and over. Thank you Mr Lewis.
@mbeanbag2
2 жыл бұрын
Awesome video! I am going to attempt these techniques on the next beams I build for my kitchen remodel. Thanks for taking the time to show the process in order to reach the final product.
@laysim7
3 жыл бұрын
Thank you for your vids! I'm an apprentice carpenter and have learned loads from your videos and techniques. Really like how you talk about the details, like pros and cons of different tapes! Cheers for being humble and showing the imperfections/room for upgrading a certain move for the next assembly. All the best.
@InsiderCarpentry
3 жыл бұрын
Thanks man. Glad its helping you.
@zack8399
3 жыл бұрын
@@InsiderCarpentry ^i can ditto that comment. Though I'm past my apprenticeship years, still learning lots. I've never seen the tape trick applied to such a long run. Love it!
@productiontrimcarpenter
10 ай бұрын
Just did my first baby beam of 4 ft as part of a much larger beam project and it went awesomely well thanks to you sir. Got a few looks at the shop, as they have always been built with miters glue and 15 gauge brads. 55 year old apprentice with 2 years in the trade, and your technique is awesome! Thanks again.
@dickdoc3337
3 жыл бұрын
First Class workmanship on Wood and Video very good "Teacher in many ways" you are looking well Lewis have a great weekend...
@InsiderCarpentry
3 жыл бұрын
Thanks 👍
@briancorboy1042
3 жыл бұрын
I'm going to have to try that on my next coffered ceiling. Thank you for taking the time to film and share your techniques.
@billcarter6984
3 жыл бұрын
I see a red saw running on a festool track-I thought it wouldn't work with anything but festool saw. What saw are you using?
@muddywater6856
3 жыл бұрын
A strap of tape perpendicular to the miter about every foot or two seems to help hold things tight for me... Also a quick run of a veneer roller down the tape before folding helps reduce glue bleed. I need to try the TB3! Great video
@InsiderCarpentry
3 жыл бұрын
Thanks for the tips! I have found the same thing with running some strips perpendicular also. 👍👊
@rickpolicastro5474
3 жыл бұрын
So very much enjoying a fellow craftsman at work... a breath of fresh air
@javierchavez5296
3 жыл бұрын
Your carpentry skills are awesome dude.. who ever disliked this video they're just unhappy people.. jealousy..👌✌👍
@AllthingsJimThorpePA
2 жыл бұрын
Have to make three beams for my mountain house. This video gives mevthe confidence. Thanks
@michaelwangler486
2 жыл бұрын
I've used this technique with smaller boxes and blue painters tape. Recently I am building a large TV surround. The 45.5 is really important with large pieces. I did the first at 45 degrees and did not get a tight joint. The only issue was using the strong packing tape. Since the project was paint grade, I used MDF. That strong packing tape lifted some of the top surface of the MDF. Even though I sanded the pieces, the lift-off showed after spraying primer and satin finish. I had to prime a few costs and sand it down.
@jmorg1980
3 жыл бұрын
Getting ready to make some faux columns to cover some piping at work....just ordered some strapping tape and a dispenser. Thanks for the tip.
@Frankreddy62
3 жыл бұрын
Great process. Thanks for taking the time to record and share it. It is going to save a lot of time.
@jeremiahcoles2378
3 жыл бұрын
This is a great technique it totally beats glue and brads
@christophermcnulty9215
3 жыл бұрын
Maffell saw on festool rail... Nice... just done this recently myself
@heystarfish100
3 жыл бұрын
Excellent instructional video Professor and so very well produced. Thank you!
@als1023
3 жыл бұрын
I use a small triangle ( saw ) file to touch up the teeth on the tape roller. I use them a lot for various quick tape jobs like flooring underlayment, vapour barrier etc. Great video, down and dirty, fast and simple !
@brandonlong5276
Жыл бұрын
just did this today worked great - apprentice carpenter
@littlebit5870
3 жыл бұрын
Thanks for the info! Perfect timing for my beams next week.
@patrickmcardle4511
3 жыл бұрын
I love all the detail that you go into in this video. Thanks for sharing!!
@johncasson5001
3 жыл бұрын
Excellent video and talk through and you made it look so easy , superb.
@publicprofile1
3 жыл бұрын
I was fighting with long miters a month ago while making a bookcase. This is genius!
@Pooky1973
3 жыл бұрын
LOL
@timloney2251
3 жыл бұрын
Greatly appreciate you taking the time to put this video together! Lots of tips and tricks packed into this video.
@danielsilvis203
3 жыл бұрын
Hey man thank for making these videos you have helped me on the job from just watching your videos. You are really talented.
@InsiderCarpentry
3 жыл бұрын
Glad to hear it!
@vassoscostas473
3 жыл бұрын
Thanks-excellent video. I am learning a lot of new techniques which I plan to apply to various projects. Just one comment (which I hope you won't take as a criticism), it might be worth showing the end result at the beginning of the video and then it is clear what you are working to achieve.
@InsiderCarpentry
3 жыл бұрын
The problem is the end result doesn’t happen for three months after I do the work. But I’ll see what I can do.
@coryschulthies8731
3 жыл бұрын
Always fantastic videos. I'm going to apply this technique to make a 1.5" wide finished end panel for fridge cabinets using 3/4 plywood.
@davidcapes9629
3 жыл бұрын
Awesome video man. I’m doing this on a beam light for my dining room. Will definitely use your tape and burnishing tips!
@swolenation8432
3 жыл бұрын
I love it u could even do this method onsite with a jobsite table saw and a tracksaw is obviously portable but def have to rip that straight edge first then throw it through the tablesaw and i think as long as the bevel is slightly steeper than a 45 this is flawless and anyone whos got patience could do it i love it keep up the slick ideas man
@mlctesting6732
Жыл бұрын
great idea
@chrislogue5744
3 жыл бұрын
Absolutely love the method. I'm going to try it on my next set of beams. Keep the great videos coming brother.
@InsiderCarpentry
3 жыл бұрын
Thanks, will do!
@slcustomcarpentry853
3 жыл бұрын
I did 3 folded miter columns today with the HD tape. Perfect.... 45.5, titebond, flawless... Thanks brother...
@slcustomcarpentry853
3 жыл бұрын
I did buy a bunch of strapping tape for the next ones... LOL
@InsiderCarpentry
3 жыл бұрын
Glad to hear it worked well!
@nickbild3538
3 жыл бұрын
Going to use these tips to wrap some columns that support my covered patio in cedar. Thank you. Subbed 👍
@Mr0Randomness
3 жыл бұрын
love seeing you more active on YT, came from insta and this is just great content. next up, stair caps?
@Mark_MOORE_VFL
3 жыл бұрын
New sub here watching previous videos I like how you talk about being efficient I'm always trying to find new ways to do that. Being a one man crew is impressive
@jacobtanner1933
3 жыл бұрын
Love the Videos Spencer! I make my beams and miter folds the same way. Love watching your videos on here and Instagram. There are always bits and pieces that I have not thought of or experienced and can apply it to my workflow! Thanks and keep up the Great Work!
@johnfrederickson3082
3 жыл бұрын
you make this look so simple
@lerxstfan8295
3 жыл бұрын
Nice job man. I did one with birch plywood recently and i wish i would have seen this beforehand. That strap tape seems like the way to go. I only had masking and it took a lot of time to get it right. That being said, im sure your finish product is far superior to mine... thx for the vid!!
@coreyyoung186
3 жыл бұрын
Nice work! This technique is something I have used for many years building teak cabinetry for yachts .And yes titebond 3 is the way to go.
@edgarbarron6689
2 жыл бұрын
Thans for the tips
@gregdee530
3 жыл бұрын
Had a job like this just last week that had to be done on site with the track saw, I used Gaffer tape (Australia) and it worked well.
@evodawg
3 жыл бұрын
Looks like it works very well. Have to give it a try. Thanks.
@stephank6997
3 жыл бұрын
It looks like you have an extensive arsenal of track/plunge saws. How about a tool comparison between your favorite Festool vs the Mafell that was used in this video?
@InsiderCarpentry
3 жыл бұрын
It's definitely on my list to do a track saw comparison video. I have 5, and I'd definitely do things different if I could go back.
@keving8682
3 жыл бұрын
@@InsiderCarpentry I would love to see your comparison review of track saws. Have been planning to get the Mafell and use Bosch tracks (same but cheaper than Mafell's branded ones).
@stevexbishop
3 жыл бұрын
I discovered your channel recently Spence and I love all your stuff. You are a very impressive carpenter, thanks for sharing everything, for a part time woodworker like myself your stuff is fantastic. This mitre fold technique on long stuff is just great, would you ever cover an existing beam with a fold technique or just fit every side panel separately? Thank again Steve
@mitchelldecker6128
3 жыл бұрын
You are awsome,,,,,,. Thank you
@richtapper476
3 жыл бұрын
Another Great video!! How about a shop tour next?
@InsiderCarpentry
3 жыл бұрын
That's definitely on the list of videos I want to do.
@jeffreyeiford2750
3 жыл бұрын
Thank You for ALL the info tips man . You Da Man
@tc9148
3 жыл бұрын
Love all of his videos, so detailed and so practical.
@CARyan08
3 жыл бұрын
Excellent insights on the finer points. Love it.
@kiwdwks
3 жыл бұрын
You always have great tips to share. Appreciate it!
@InsiderCarpentry
3 жыл бұрын
My pleasure!
@walterperrault
3 жыл бұрын
Awesome thank you for sharing your tips and techniques
@jamartin1
3 жыл бұрын
Very nice I love it! Really cool chalk line!
@treelimb2878
2 жыл бұрын
That's a great idea! Thank you for posting!
@rankingutteriz455
3 жыл бұрын
Very informative and helpful. Perhaps a closeup of how much glue in the joint is the proper amount, or I can just try it on scrap pieces to learn.
@deejohnson5163
3 жыл бұрын
Always glad to see your vids.
@InsiderCarpentry
3 жыл бұрын
Glad you like them!
@vitaliyg3516
3 жыл бұрын
Thanks
@garrettlund
3 жыл бұрын
Awesome video as always!! Hope you and the family are doing good!
@InsiderCarpentry
3 жыл бұрын
Doing great. Thanks Garret. 👍
@Quickened1
3 жыл бұрын
I've used a lot of that strapping tape on packaging. It is by far, the best packaging tape out there, now I have a new use for it too! ...and yeah, you're not gonna be cutting that stuff with a standard tape gun cutting blade...
@oupaswoodshop1325
3 жыл бұрын
Very accurate and quick.
@mmocny
3 жыл бұрын
Thanks for the great tips, but personally I created a rip sled for my table saw (clamp down board with the crown part overhanging). My table saw is 12 inch blade, so even at 45deg I have room for the sled, but you could rip a straight edge first, then pass with miter. Cheers.
@Matasky2010
3 жыл бұрын
Thanks for the video, I was actually searching your beam videos yesterday to see the exact process you used to get that long straight edge. Having to move the guides to finish the cut is not ideal but I guess it gets the job done (Not sure if joining a 3rd guide rail would offer much/any advantage)...
@zooie69
3 жыл бұрын
nice one spencer
@Pembroke.
3 жыл бұрын
Fantastic job thanks for sharing 🍺
@robertbamford8266
3 жыл бұрын
Thanks for video. Great technique! Should work for a four sided post or leg (spacers glued in place). Well explained. Can’t say enough positive about Jessem Stock Guides. I put them on the upgraded Biesemeyer fence on my old Craftsman table saw - no riving knife, no effective splitter, useless blade guard with kickback pawls. I also use a magnetic feather board. (BTW supper vs. dinner leads to an interesting discussion.) Thanks again.
@InsiderCarpentry
3 жыл бұрын
Haha! I am a defender of "supper". My wife and kids try and use "dinner" and I hate the word. LOL
@robertbamford8266
3 жыл бұрын
Insider Carpentry And then there’s Snoopy. Somehow “Dinner time, dinner time, din, din, dinner time.” just doesn’t make it.
@davidzwicker9988
2 жыл бұрын
Awesome technique!
@zackbridgman
3 жыл бұрын
Great tip with the strait line to remove the crown. Had this same issue yesterday. I wonder if the materials were shorter runs if you could run them over the jointer a few passes and then to the shaper with a chamfer bit and power feeder. Just thinking of how to do a large beam packages to increase productivity.
@InsiderCarpentry
3 жыл бұрын
Anytime you can use a power feeder its amazing. But with tooling setup it might be counterproductive. I'm considering purchasing a 16' guide rail. Then i could just plop it down on any length and rip the bevel.
@zackbridgman
3 жыл бұрын
Insider Carpentry my next thought. Adding another 8’ track to my festool track lol.
@bigD578
3 жыл бұрын
Asmr packing tape removal at the end 👌
@Jddlincoln
3 жыл бұрын
Is that the maefel track saw? If so how do you like it? Love the content. Learn something new every video.
@Matlock69
3 жыл бұрын
I was thinking the same thing.
@InsiderCarpentry
3 жыл бұрын
It is. I love it except that it doesn't line up with festool guide rails when beveled.
@Valmorphanator
4 ай бұрын
Got excited to try this unfortunately my menards track saw only goes to 45.
@gregorylondos534
3 жыл бұрын
You can actually try to 3 inch wavy packing tape it gives more surface area to grip specially around the microphones rather than having a 1 inch I have an inch and a half on each side or surface area to grip the surface of the work. Just a suggestion Greg
@Bankfishindude
3 жыл бұрын
Like we weren’t all waiting for the tape pull!!
@ChristIsLord229
3 жыл бұрын
I do this with vinyl millwork base. Works well.
@Mr_Pereira13
3 жыл бұрын
That was awesome
@mingchan243
3 жыл бұрын
Nice
@randallgress9944
3 жыл бұрын
I saw your video and have used this myself in the past. It works great. Just one question, when you set the angle on the saw you made it for 45.5 degrees rather than 45. Is there a reason for that? Thanks and good work.
@InsiderCarpentry
3 жыл бұрын
Ensures the outside corner comes together tight.
@christianwarther2971
3 жыл бұрын
I'm a GC who is starting to self perform more finish and your videos are a huge reason I am feeling comfortable doing that. Do you think this method would work with hardwood plywood or are the veneers too thin, possibly showing through at the corners?
@InsiderCarpentry
3 жыл бұрын
Depends on the plywood you're using and how good you are with the sander. With the plywood I use sanding through usually isn't an issue.
@adamarcher5871
3 жыл бұрын
Instead of a track saw would a jointer work? I’m new to the woodworking. Starting small so far but want to expand my knowledge. Love your Newell posts. Want to do this in my house now
@Stefan_Kawalec
3 жыл бұрын
It's nice that you actually took advice on that reinforced tape. A mark of a true craftsman - always learning. BTW, have you tried Mafell guide rail?
@InsiderCarpentry
3 жыл бұрын
I haven't. I have so many festool guide rails I'm kind of committed to that system. It would feel like wasting money for me to buy a different brand.
@Stefan_Kawalec
3 жыл бұрын
@@InsiderCarpentry Mafell plunge saws are compatibile with Festool/Makita system, but original guide rail gives you some extra features. For me it's the same - battery platform and guiding systems determine my choice of tool brand.
@InsiderCarpentry
3 жыл бұрын
Yeah. The mafell works fun with the festool rails besides the fact that the splinter guard doesn’t line up on a bevel. Otherwise it’s a good combo.
@Stefan_Kawalec
3 жыл бұрын
@@InsiderCarpentry www.timberwolftools.com/mafell-guide-rail-f-160-1-6-m-5-2-ft-long. You'd need two of those, plus a connector for $86. That gives 400 bucks. Quite a sum.
@jefferyholland
3 жыл бұрын
If you are cutting off 3/8 when cutting on your chalk line, how do you still end up with 5 1/2 inside dimension? I would imagine that depending on the quality of the lumber you might have to make adjustments on the blocking. Thanks for posting this as I have in the past always used clamps and pin nails for building folded miters.
@InsiderCarpentry
3 жыл бұрын
I fudged my cut over a bit both ways and had to shave 1/16 off a couple of the 5-1/2” blocks.
@royalvarez6436
3 жыл бұрын
Who’s your shop buddy? Second observation-nothing like working in the shop with the doors opened. Are the beams you are wrapping structural or faux? You seem confident that given the slight size differentials in the veneers that you have no concern about fitting them on site. Thanks again for the lesson!!
@InsiderCarpentry
3 жыл бұрын
That’s Roxy 👍
@fergusrb
8 ай бұрын
I could have sworn on one of your other videos you said to use 46 degrees for your miter. Does that help with the burnishing of the edge to close up any gaps?
@sdwputnam
3 жыл бұрын
Hi, I'm 68 yo retired, have done some woodworking over the years and I'm in the process of remodeling my home I built and have lived in since 1980. I want to built and install and beams and have watched both your box beam and this tape beam videos. I like them both however I'm worried about the taping/gluing of the beams process. Would you say the box bean is a safer bet to go ? Looking for an opinion .
@seabass7239
2 жыл бұрын
Love the method used it many times. We're doing a job now where the room is 24 ft long in the direction of the box beams. Obviously we can't build a box beam that long and install it and get tight joints to the walls on either end so we're going to have to two piece them. What is your advice on a good method to join them together. I've thought about just square button them with biscuits or a peg system but I'm afraid you're going to see The Joint. I thought about possibly a shiplap looking joint etc. Your expert thoughts would be appreciated
@InsiderCarpentry
2 жыл бұрын
Typically I'd just be doing a standard but joint. And do my best to grain/color match the splice.
@grainplaner216
3 жыл бұрын
I can see how letting glue run to the outside of your miter could be problematic if a lot of sanding was needed possibly exposing a portion of the inside of the miter joint.
@royr327
2 жыл бұрын
What brand of saw you are using with that Festool Track, it appears to work very well.
@mattdouglass6482
3 жыл бұрын
I went to school for engineering but have been a professional carpenter/remodeler for 10 years now.... i LOVE these videos. Insider Carpentry, Finish Carpentry TV and Matt Risinger (BUILD) network are my Saturday morning TV shows. I either A) learn something totally new or B) re-affirm i'm doing it the way other guys are doing it, which is great. Spencer if you read this, id love to see a baseboard installation video of how you install baseboards over tile and hardwood. In one of your videos you said you install baseboards before hardwood is that correct? can you explain that? Do you go back with a shoe? i always seem to struggle getting perfect inside (cope) and outside base corners (miters) over finished floors...do you scribe your baseboards? what do you do about gaps under the baseboards when the floors are wavy? I'D LOVE TO SEE YOUR TECHNIQUE. Finding angles is easy but they never seem to want to line up perfectly with the floors are not flat, what do you do? i hate standing back and seeing black gaps under baseboards because the tile is lumpy in spots....
@InsiderCarpentry
3 жыл бұрын
Thanks for the kind words. In my region almost all the home builder install baseboard, then paint, then flooring, then install shoe molding at the end of the job. So I almost never scribe baseboard to the floor. Shoe molding is small and flexible so it conforms to the humps and the dips in the floor. 👍👊
@mattdouglass6482
3 жыл бұрын
@@InsiderCarpentry i feel like were texting this is so cool. quick question, lets say youre running base (with a laser im assuming), do you use a 7/8" block under the baseboards for hardwood floors? im assuming you find the high point and thats the elevation you work from? do you do mitered returns on your shoe moldings at door casings? in the past ive done 22 or 33 degree cuts at the end of a shoe run but the last job i completed i used mitered returns and it seemed to look classy.. thoughts?
@InsiderCarpentry
3 жыл бұрын
I haven’t ever used a laser to run base personally. Keep base you the thickness of your hard surface flooring plus 1/8” if you’re using shoe. For shoe I just nip the end off at 45 to make a return. Painter touches it up after I’m done. 👍
@stevenvachon9745
3 жыл бұрын
@@InsiderCarpentry I'm surprised that you don't run into situations where you are asked to run baseboards without shoe. I find more and more customers prefer this clean look, usually on the more contemporary and higher end homes. Installing shoeless baseboards is definitely a learned skill Matt. Using a laser is ok with smaller rooms but with big rooms you could lose quite a bit of profile unless you have lots to begin with or installing over wall paneling. I find that you need to cut and lay out your pieces before scribing to minimize loss.
@InsiderCarpentry
3 жыл бұрын
No doubt about it that it’s a cleaner look. I’m just kind of lazy. 😂 Id rather go beast mode on base before finish.
@rankingutteriz455
3 жыл бұрын
Oh, and a link to the string line in the video please! I couldn’t find it in your store. Thank you. 😁
@InsiderCarpentry
3 жыл бұрын
I just added it thanks. You can find it in the video notes or the top pinned comment.
@louisokrent4717
3 жыл бұрын
love your techniques & teaching method! Why 45.5 degrees?
@hammerdownhammerdown2540
3 жыл бұрын
That is smart
@LewisRenovation
3 жыл бұрын
Do you ever have issues with the miter edge running against the table saw fence? Messing up the edge?
@InsiderCarpentry
3 жыл бұрын
No not really.
@markokany4854
3 жыл бұрын
This is a really great video. Do you have any tips or things to watch out for when using a track saw for the mitre rip?
@casycasy5199
3 жыл бұрын
what track saw is that red body on a festoon track? id love to see a video of your shop love that vac system over head you have
@InsiderCarpentry
3 жыл бұрын
Its a mafell. Thanks I'll definitely try and do a shop tour this winter sometime.
@scotts4125
3 жыл бұрын
Spencer you need a new tape gun. That 3M is horrible. I switched from that gun to a Tach-It EX3. World of difference. We just did two large home moves right after each other so lots and lots of packing. I also switched from the same heavy duty tape to Duck Brand. Not sure if it work better than the reinforced for what you do. Probably not but I like the Duck Brand a lot better than the heavy duty I used for years.
@benl6028
2 жыл бұрын
Great Video, would you do anything different if it was for an exterior beam wrap?
Пікірлер: 237