Thank you so much for the help. I couldnt figure out why my drone wouldnt work after binding the frsky to the drone and now i know why.
@FPVEvilMunkey
2 жыл бұрын
Glad it helped.
@guts5016
2 жыл бұрын
@@FPVEvilMunkey i do have one problem though. When i push the throttle up slightly it just goes to 100 automatically.
@Einstine1984
4 жыл бұрын
Thank you! That's exactly what I needed
@FPVEvilMunkey
4 жыл бұрын
Your very welcome thanks for watching
@cheezenation9182
4 жыл бұрын
I got a new emax tiny hawk freestyle and I was having trouble but thanks to this video It made everything a lot easier thank you man. Now I can bind it and it can fly
@FPVEvilMunkey
4 жыл бұрын
Glad it helped, and thanks for watching.
@900Redshark
4 жыл бұрын
Same here! But I am still super confused I need some major help! My controller is set to ARM and it works so I am able to fly (just not the best). How can I put my TinyHawk into a more beginner mode like Horizon (if that’s possible)? Which leads me to my next question. If I set a switch to do what I want like (horizon mode or turtle mode or whatever etc) how does that switch KNOW that’s what it’s for? Does that make sense? I was also able to connect my drone to BetaFlight...but my controller did not work on BetaFlight. Any help would be awesome I am so lost. I’ve been flying Traxxas drones my whole life but this stuff makes no sense to me! Oh and when I was flying last night...every time my drone landed upside down after a crash it just when FULL Throttle by it self!!
@FPVEvilMunkey
4 жыл бұрын
@@900Redshark you have to setup the modes in Betaflight. You have to tell Betaflight the switch and what position.
@900Redshark
4 жыл бұрын
FPV_EvilMunkey Ok I’ll look into that more. Do you happen to know why the drone goes full power when it crashes or flips on its back? Or is that something that could be anything and I just need to figure it out myself? Thanks for your time.
@FPVEvilMunkey
4 жыл бұрын
@@900Redshark you might have air mode turned on permanently make sure that is turned off and set to a aux switch
@metrocaptain
3 жыл бұрын
Thanks. Got the switches set up correctly.
@FPVEvilMunkey
3 жыл бұрын
Your welcome and thanks for watching
@dronereviewman9580
5 жыл бұрын
Thanks 4 posting this man!!!! I love my qx7 i just wish it was black!!! Mine is white but i really like it!!
@FPVEvilMunkey
5 жыл бұрын
Ya I love the black for sure. I know they make skins and covers for them.
@seferon100
Жыл бұрын
Omg. You are genius thank you very much for this video.
@xmwxmorris
5 жыл бұрын
By far the best video for setup.. thank you so much
@FPVEvilMunkey
5 жыл бұрын
Thank you very much appreciated
@johngarcia5695
10 ай бұрын
Thank you. Thank you. Thank you!!!
@skygroover6692
4 жыл бұрын
Thank you for the great video. Learned Alot from this one
@FPVEvilMunkey
4 жыл бұрын
Thank you, and thanks for watching.
@OzzyFpv
3 жыл бұрын
Nice Explanation Aviator Thank You!
@WhoFPV
5 жыл бұрын
This is great and helpful channel! Happy to have subscribed!
@FPVEvilMunkey
5 жыл бұрын
Thanks man very much appreciated!!
@oussamasmaini7297
2 жыл бұрын
🤣Nice man. I like rick and morty sound
@tonyc7049
10 ай бұрын
I know this is a old video, but I have a ? I'm using a Taranis Q7X on Liftoff and cannot get the switches to take, using the sim's controller interface. I'm not using Beta Flight and prefer not too.Rather not learn another piece of software at age 70....The ? is, will the input screen do the job, or is the mix page also necessary for the sim to see the switches. Thanks for you excellent content Tony
@CALIKID90603
4 жыл бұрын
My opentx is mode2 TAER and my QX7 trainer mode source is channel order TAER, but my mixer and inputs channel order is AETR. When I try to change the AETR to TAER, it throws off the channel mapping in beta flight.
@Juanfernino
2 жыл бұрын
This was really helpful! Thanks so much!
@mario76rcheli73
4 жыл бұрын
WOW super video , slow and clear 👍
@FPVEvilMunkey
4 жыл бұрын
Thank you very much!!!
@dosc6430
3 жыл бұрын
Thank you so much!
@FPVEvilMunkey
3 жыл бұрын
Glad it helped
@DigitalN8v
3 жыл бұрын
Can you do a video on the tools. I was suprised to find the taranis qx7 access has a spectrum analyzer. And was wondering if OpenTx offers other tools. And also a demo on calibrating the joysticks and switches would be helpful.
@hanzyali8655
5 жыл бұрын
legend
@IKK420
4 жыл бұрын
Awesome Dude Thank You!!!
@FPVEvilMunkey
4 жыл бұрын
Your welcome man thanks for watching
@Ripen3
2 жыл бұрын
I'm having a problem, my 3-step switches register as 0%-50%-0%, i would like one of the zeros to be 100% but couldnt figure out how..
@RosscoStixFpV
2 жыл бұрын
For some reason I use the same arming switch but in betaflight it's aux 4 why is that?
@ddomtive
3 жыл бұрын
Not working i use crossfire do i have to do something in the crossfire setting
@RosscoStixFpV
2 жыл бұрын
What channel is aux 1?
@KraljTomislavI
4 жыл бұрын
Orange rx Tx6i or frsky taranis qx7 for rc plane? It is taranis qx7 just for racing drone?
@wvo9323
3 жыл бұрын
Bro i have one doubt. one model is bind with my receiver. can I bind second model in same receiver? Because it didn't work for me .so I ask this question.
@FPVEvilMunkey
3 жыл бұрын
I usually don't bind more than 1. I have done it on Tiny Whoops with D8 but that's it otherwise mine are all separate. You can also bind to multiples with Crossfire
@arieljunco1182
Жыл бұрын
Hola , no encuentro el video num 1....
@thisisspartan5953
4 жыл бұрын
Excellent video as usual... !!! I need some help please !!! I have an eflite viper 70 mm edf and I bind my Taranis QX7 with Spektrum Rx AR636A AS3X using the JP4IN1 Jumper Multiprotocol Module....... everything is working good, but I don't know how to make the Safe works, how can I assign a switch to enable or unable that option?..... I'll appreciate any help... thank you....
@FPVEvilMunkey
4 жыл бұрын
Thank you. I honestly don't know anything about that module. I only use the TBS Crossfire.
@oded_10
4 жыл бұрын
Can I use the transmitter for aircraft and helicopters as well?
@FPVEvilMunkey
4 жыл бұрын
Yes you can.
@Robert-bu5fv
5 жыл бұрын
Nice!!
@FPVEvilMunkey
5 жыл бұрын
Thanks!!
@rweb3175
4 жыл бұрын
Hey dude, I need help. I have a Taranis Q X7 controller, which worked perfectly for months. But a problem just appeared, when the sticks are centered, it shows on the screen that they are actually not, they're at about a 2.5 degree angle, both of them. This affects flying pretty badly, do you know how I could fix this ?
@FPVEvilMunkey
4 жыл бұрын
You need to recalibrate the pots.
@rweb3175
4 жыл бұрын
@@FPVEvilMunkey And how do I do that?
@FPVEvilMunkey
4 жыл бұрын
@@rweb3175 it's in the initial setup video
@brayden5888
3 жыл бұрын
How did you get it to say the modes? I’d like to set the voice up on my switches without having to use an sd card
@FPVEvilMunkey
3 жыл бұрын
The SD card is what stores all the sounds you want to use
@brayden5888
3 жыл бұрын
@@FPVEvilMunkey I mean the regular voice, for example your modes
@FPVEvilMunkey
3 жыл бұрын
Same you have to download the sound pack to the SD card. I have a 3rd video on how to change sounds
@marks6325
4 жыл бұрын
Great video! How do I get the sounds??
@FPVEvilMunkey
4 жыл бұрын
There are all kinds of places to find them just search for FrSky Taranis sound packs
@subhajitsaha992
4 жыл бұрын
Sir I m new here ... I try to see my qx7 ...I had no idea still i play with my radio nd try to practice how to celect switch ...sir I make a switch name arm nd then don't know wht I did but so many lines come into arm switch ..I think I did mess with arm swich now I want to delete that arm switch I created ...but transmiter not give me option to delete chanel ... Sir pls help me how to delete any chanel if I did mistake .... ? Hope I eble to explain my problem .... Any way to undo a newly created chanel ? Delete channel ?
@KelvinFPV
5 жыл бұрын
Why do you use input? Mixer alone does the same thing
@FPVEvilMunkey
5 жыл бұрын
Just how I learned how to set it up, and it works for me flawlessly.
@TheSkyPod
4 жыл бұрын
No ACRO or Rate modes show in the mode adjustment in BETAFLIGHT or INAV . Very confusing . Maybe show after you set that 3 position switch on how to setup in Betaflight .
@FPVEvilMunkey
4 жыл бұрын
You won't see Rate or Acro. There is Angle which is Stability mode. Horizon, and also Air Mode
@TheSkyPod
4 жыл бұрын
@@FPVEvilMunkey Yes that is why I wondered why it was mentioned. If I have a 3 position switch I want for flight modes , which 3 are used , or are only 2 used (Horizon & Angle) , and the third is just no mode at all ?
@FPVEvilMunkey
4 жыл бұрын
You can set the switches to whatever you want. Here is a Betaflight tutorial I did a while back. kzitem.info/news/bejne/tm2M2K2Ko6qJe3o
@JonahBam
4 жыл бұрын
I have a kiss rig can I d\still do this through beta flight
@FPVEvilMunkey
4 жыл бұрын
I think Kiss has it's own GUI you use
@JonahBam
4 жыл бұрын
FPV_EvilMunkey yep thanks for that do you have a clue how to change stick inputs meaning my throttle is where yaw should be and so on I can’t figure out how to change it. Appreciate the quick response! Thank you
@FPVEvilMunkey
4 жыл бұрын
Follow my part 1 it will take you thru the initial setup. Might be not mapped correctly
@JonahBam
4 жыл бұрын
FPV_EvilMunkey thank you a million just figured it out really appreciate it:)
Пікірлер: 74