Quite a bit of the sound deadening comes from the water resting in the bottom of the water box. Once you put her in the lake and run it it should quiet down some. Looks like a nice piece 👌
@RODSANDRIGS
2 жыл бұрын
It did quit it down a bit in the water but sounds great!
@johnstryholuk8618
Жыл бұрын
Do you have a part # for this water box? Or a link? I only see ones that say they fit 1996-2020 round nose
@cbentertainment7808
2 жыл бұрын
Noticed the round nose pole on the square nose body. How’d you manage the different bracket sizes from SN to RN. Also the 2inch difference in steering cable did that not become an issue with quick steer mod? I am currently doing this mod on my ski. Thanks brother 🙏🏻
@RODSANDRIGS
2 жыл бұрын
You can purchase a adapter pole bracket to work in factory square nose holes if you choose to go that route. But I drilled new holes for the round nose stock bracket and made the cable hole a little bigger as well as made a reinforcement plate for the under side of the bracket. I also purchased a round nose steering cable because the stock cable was too short.
@RODSANDRIGS
2 жыл бұрын
Thanks for watching! If you have any more questions I’ll be glad to answer them!
@cbentertainment7808
2 жыл бұрын
@@RODSANDRIGS appreciate it! Drilling and reinforcement likely is the route I’ll go. I might see what the options are for drilling and tapping a new steering mount on the steering plate. Fiberglass, bondo, and jb weld.
@RODSANDRIGS
2 жыл бұрын
That’s sweet! It’s absolutely worth doing the pole swap and steering upgrade. Makes it feel like a whole different ski
@imdefinitly18now
2 жыл бұрын
How long did you run it without the waterbox? Great video! Thanks
@RODSANDRIGS
2 жыл бұрын
I ran it for a few weeks, I was seeing if my ski would run any better because I had suspicions that my stock water box was leaking. thank you!
@robinpeters5164
2 жыл бұрын
did you have to modify your hood to accept the oem aircleaner to fit? mine rubs on the airinlet
@RODSANDRIGS
2 жыл бұрын
The inside of my hood does not have the air inlet hoses so this may be why I didn’t have an issue when it came to fitment.
@TurkiAlabilani
Ай бұрын
How can i remove the water box and let my super jet without water box please answer ❤
@ToddleyProductions
2 жыл бұрын
Did you have to re jet ?
@RODSANDRIGS
2 жыл бұрын
No I did not! Runs perfect with stock jetting
@benselby6171
2 жыл бұрын
Does it idle in the water with the idle that low?
@RODSANDRIGS
2 жыл бұрын
No it does not. I had it set low because I didn’t run a tether at that time so I could do some hood tricks without accidentally pulling the tether off.
Пікірлер: 17