I can’t believe I just stumbled upon this video randomly and ended up spending an hour on late Monday night learning and taking notes about pressure relief valves… amazing lesson! Thank you sir! 😄 By the way the pressure drop at the balance orifice is described by the Poiseuille’s Law (I believe), I’m just leaving it here as knowing that really enabled me to understand how these valves work.
@gurdeepseehra2307
4 жыл бұрын
Dear sir i watching your video so good.knowledgable video but after downloaded any video clearty not good voice is ok.
@Joetime90
2 жыл бұрын
Ivan and I have similar hair styles lol I did love this, seeing interactions between Carl and curious people such as I.
@TheRajesh9556
5 ай бұрын
hi, This is Rajesh here, like to know whats the use of dual check valve with a relief valve on the jacklegs of drilling rig.
@SH-bl9wh
Жыл бұрын
Great teaching skills. Thanks for sharing. Looking forward to find out more about lunchboxsessions
@SH-bl9wh
Жыл бұрын
Question. @40.11 pressure below 950psi keeps the poppet closed because of pressure balanced through the orifice. Then that means it should balance after 950psi. But it doesn't why?
@pankajsaini5258
2 жыл бұрын
Thanks sir for uploading such a great video on the explanation of relief valve.🙏
@sunnmyong
Жыл бұрын
we did replace control block )whole set) ...than found main drum pay out not functioning but pay in / swing and boom functioning were still functioning...please advise thanks...
@Eagle2pro
4 жыл бұрын
Hi Carl, I have you on my LinkedIn keep up the good work.
@rohitgurav6361
4 жыл бұрын
Why did the pilot valve start oil leakage to tank at 950bar? Shouldn't it have started at 500bar since it is similar to the relief valve without a pilot in previous slide?
@lunchboxsessions
4 жыл бұрын
Great question. The pilot poppet surface area and the pilot spring is much smaller for the very small pilot flow volume, and thus the override properties for the pilot section of the balanced, pilot operated relief valve are different from the poppet and spring properties of a direct acting relief valve that would be large enough to handle full pump flow.
@skkkannan81
2 жыл бұрын
Hi sir I am hydraulic press break ( sheet folding ) machine two cylinder how to work same speed and up and down
@skkkannan81
2 жыл бұрын
Hi sir I am kannan ,Chennai India, hydraulic system normal running time oil high temperature, how can normal temperature without use air cooler,water cooler, and jiller units ,
@nicolaspaul8694
2 жыл бұрын
I dont understand why the relief valve let the fluid go true at 800psi if it is set to 1000psi ???
@GulshanKumarsmarty
Жыл бұрын
sir please explain the working of Accumulator safety block
@salemrachdi8704
2 жыл бұрын
Nice video. Can please send me the drawings of one PRV and the combined drawing with the two PRV valve. I like to understand the design concept and the appropriate selection. Thanks.
@anagha8891
8 ай бұрын
Concept of differential pressure is applicable for main poppet
@ademBizon
3 жыл бұрын
I do have a question What will happen if I replace a gear hydraulic pump with 22 cm/rev to 42 cm/rev What will happen in my system 🤔? Another question is the relive valve gonna send the unneeded oil to the tank ?
@Ranga-RB
4 жыл бұрын
Good lesson, Im student of Diploma in Hydraulic & Pneumatic in Sri Lanka 🇱🇰
@mdnizamuddin8957
2 жыл бұрын
Hello sir, Good morning. I'm from Bangladesh.
@karbimashi2134
3 жыл бұрын
Is there a name for valves that are a combination of basic valves? Such as the piloted relief valve with an orifice and two relief valves as one component.
@dharamchand7178
3 жыл бұрын
Please make a video with two cylinder in different pressure and pilot oppreted check volve
@hoseaharris4682
3 жыл бұрын
Do you have any simulations for a differential poppet type double relief valve?
@machineryoverhaulretrofitm6607
Жыл бұрын
thank you very much Great explanation
@samirmondal4301
2 жыл бұрын
Really Enjoyed the Lesson. Education has no End.
@LalthlenglianaKhawlhring
2 жыл бұрын
How can I too be on the session ? Please include me.. 🖐🏻
@lunchboxsessions
4 жыл бұрын
To try out the simulations for yourself, take a look at our Pressure Relief Valves session: www.lunchboxsessions.com/explore/hydraulics/pressure-relief-valves
@parthiparthiban9346
2 жыл бұрын
Thanks sir for uploading relief valve
@johnevan7737
4 жыл бұрын
In a balance piston type relief valve,there’s a pilot port.if pilot pressure is applied the valve functions as unloading valve?am i correct?
@lunchboxsessions
4 жыл бұрын
Often a vent port is available with a balanced, pilot operated relief valve yes. The vent port can serve several functions including a system unloading one like you mentioned. This function is usually about allowing pilot pressure outward, towards tank, as opposed to applying pilot pressure 'into' this port. A true and dedicated unloading valve while similar is also a little bit different from a relief valve.
@الجوكرالجوكر-ض1د2ز
3 жыл бұрын
السلام عليكم نريد الترجمة إلي العربي وشكرا
@맹구형
3 жыл бұрын
Please subtitle all videos in Korean.
@fredmwenya4483
Жыл бұрын
Information that i needed!! 🙏
@ranveerkowlessur1966
4 жыл бұрын
How to adjust a relief valve ?
@abdullaalmosalami
3 жыл бұрын
This was great!!
@michaelzajac5284
3 жыл бұрын
You mean great teacher? 😏
@random-kc8gx
4 жыл бұрын
Really enjoyed the lesson and learnt something useful! Would love to see videos on NG 6 or NG 10 stack/sandwich valve configurations for PT dcv for a single ram or multi ram configurations. Thanks and please keep em coming!
@michaelbungcaras6159
3 жыл бұрын
Very interesting topic
@samuelngata3757
2 жыл бұрын
Thank you very much
@Trudeautthebestt
Жыл бұрын
very bad and annoying
@Trudeautthebestt
Жыл бұрын
they should pay me to watch it
@Meothui1236
3 жыл бұрын
Pumps concrete??
@a.f.mforeromecon3559
Жыл бұрын
Bueno
@manindraprasadchauhan1320
Жыл бұрын
Awesome 👍
@yehtutnaung7164
3 жыл бұрын
nice lessons
@joeeee7699
3 жыл бұрын
Thankyou!
@mitianiseduadua2116
3 жыл бұрын
Exccellent
@pauloojeda3688
4 жыл бұрын
Nice¡¡¡
@wjimenezu
3 жыл бұрын
Great session!
@samirpashayev5946
3 жыл бұрын
it's awesome that you guys posted this for everyone! helped me out a lot! appreciated!
@hemanthchavan2819
3 жыл бұрын
your sessions are very informative and properly broken down. Gained a lot from you sir and really appreciate the way you deliver the knowledge and makes us ease to understand. Lot more misconceptions have been cleared, in my learning.
@bryanlockleer4802
2 жыл бұрын
You're a very good teacher. I'm moving into a new roll at a very large aerospace company where I will be calibrating hydraulic systems. I am being trained on site by an individual with over 35+ years of experience in this field and I am using your video to help me "brush up" before I start in 2 weeks. I have 15 years in aerospace working on building complex tools for precision drilling on the structure. Now I am moving into metrology / calibration. Thank you for your amazing ability to teach and your expansive knowledge!
@_P0tat07_
2 жыл бұрын
Instructor is awesome. Not demeaning to the students at all, but instead explains everything to help them understand. So to me, I knew that series of dots was the spring in the relief valve. But for the student who asked, the instructor not only confirmed that it was the spring. But also explained that it’s the industry symbol for a spring cutaway. I respect the hell out of that.
@jianliangge2174
2 жыл бұрын
Static and dynamic pressure, flow , uncompressed and orifice. After this lesson, I understand how balanced main poppet works. Load increase, static pressure increase, pilot poppet crack, flow created, Pressure difference between orifice inlet and outlet, main poppet starting open. This lunchbox session is great. Thank you.
@alihadi995
8 ай бұрын
I can't believe that I found this content online, this is absolutely gold😮
@mmnyako
Жыл бұрын
I learn a lot from this lecture. Thanks for sharing!
@alikordi68
Жыл бұрын
Thanks sir, was one my best classes that I've ever been at.
Пікірлер: 58