The production quality never ceases to amaze me. It's so good for such a small channel I always forget this isn't a 1M+ channel. I can see it in the future though :D
@DanielKellert
Жыл бұрын
Tell whoever runs the KZitem algorithm to do better 😅 Thank you though! Maybe one day 🤞🏼
@all-waysgaming6059
Жыл бұрын
I'll let em know 😂 Just keep up the quality content and you'll make it😎
@lddegree8444
4 ай бұрын
Just got a Subaru wrx wagon! I love this series alot I love this channel too. I give props for these car vlogs great camera quality and angles. Also just started watching the turboing the Honda 😆
@waynesitarz424
Жыл бұрын
Subaru timing idlers are Koyo and SKF(?). Black rings are double bearings. Those green ones are single bearing, cheap and will wear out faster. They are not Subaru. I'd go with an Aisin or a Subaru timing kit maybe with the blue turbo belt.
@DanielKellert
Жыл бұрын
Good to know! 🙌🏼
@Sti_1van
Жыл бұрын
You should do a video on how to install timing belt !
@DanielKellert
Жыл бұрын
kzitem.info/news/bejne/wIuctp2eeoRehoY
@ZolaKluke
Жыл бұрын
Damn lucky you checked that timing belt, never trust someone inexpierienced with working on any engine and glad to see the winter banger is coming along
@DanielKellert
Жыл бұрын
No kidding 😅 hopefully she’s running next week!
@ZolaKluke
Жыл бұрын
@@DanielKellert Fingers crossed, can't wait to see it, goodluck
@jonney8046
Жыл бұрын
Man those guides eat through quick. I bought a used outback a while ago, previous owner did his own timing belt… I took a peak when I brought it home. He set the guide such that it was making contact with and putting pressure on the belt! Had quite a few timing belt shavings as well 😂. Looks like you will get this done in no time!
@DanielKellert
Жыл бұрын
Thank god you checked! Hopefully the Outback is running smooth with a fresh new belt 🙃
@bash5552
Жыл бұрын
might want to time sert those timing pully threads, kind of a critical point of failure
@DanielKellert
Жыл бұрын
I love when people who actually know that they are talking about comment on the videos 👍🏼 makes me happy 🙃. If I have any doubts after I clean up the threads, they will be getting heli coils or a time sert 👌🏼
@bash5552
Жыл бұрын
@@DanielKellert Thank you Sir! I can now sleep soundly not worrying about those threads failing on you, yes, I am ocd lol, also, i have been there, done that so, learned the hard way as it were. That block material is softer then people realize, especially against steel bolts. I even hesitate to use any power tools on any faster that goes into the block or heads but to each their own, some tools are very low power and can be used correctly.
@josephtraner8431
Жыл бұрын
Great content man! Super helpful!
@DanielKellert
Жыл бұрын
Thanks Joseph! 🙌🏼
@kolbyhadley4881
Жыл бұрын
Crazy that you are only at 2k subs, Keep up the content! Love it
@DanielKellert
Жыл бұрын
Thanks man 🙌🏼
@Chris05STi1982
Жыл бұрын
Double check your rear shock mounts. They are known to rust completely out! Love the new daily!
@DanielKellert
Жыл бұрын
That was the first thing I checked when I bought the car 😅 there’s some rust starting but not bad! Thanks Chris 🙌🏼
@Chris05STi1982
Жыл бұрын
@@DanielKellert if you can find it use Evaporust to soak parts. It will eat all the rust off and leave the bare metal. Definitely advise if you see rust on the towers to wire wheel it and treat it so it won’t spread. When rebuilding my Wrx I soaked tons of parts in a 5 gallon bucket using Evaporust and it made it easier for me to powder coat and clean old parts that had a ton of rust
@devanwheeler3426
Жыл бұрын
I've only ever stripped a bug engine down to the block, but why not just order new heads instead of machining the existing ones?
@DanielKellert
Жыл бұрын
Resurfacing the heads costs about $130…. Replacing the cylinder heads completely would be around $1500-$2000. 😅
@devanwheeler3426
Жыл бұрын
@@DanielKellert wewlad that’s way steeper than the 200 something dollars for a pair of beetle heads
@creativeatheart1497
9 ай бұрын
Hi, will a 2018 subaru outback wagon non turbo have a cam carrier leak/drip at 34,000 miles on the car? they are charging me $3555+.
@isaiahvelasco8330
Жыл бұрын
you make this look way to easy man
@DanielKellert
Жыл бұрын
Those cam gear bolts were not fun 😬
@K03sport
Жыл бұрын
Wow, butchered. 😮 When you go look for trouble, more times than not, you will find trouble. But better to find trouble first, before it finds you. Yes?
Пікірлер: 31