Thanks Jan for this lovely video. Have you came across the HDMI content sharing in Zoom using Poly basic kit (Poly Studio E70 + HP Mini PC + TC10)? Does the HP PC get an HDMI Ingest?
@janzoetemelk
2 ай бұрын
@user-ww1ke9bt6j hi 👋 thanks for your comments. You are correct there is the G9 Plus kit with a TC10 which has an HDMI ingest on the HP compute side. It's going through the Teams and Zoom certification check with your local sales for more details. Hope that helps. JZ☕️🔧
@cristiannavas407
2 ай бұрын
Great video!
@itskenthomas
Жыл бұрын
What I've noticed is that if you use two panels for the same room and enable room check-in, only one panel will check in. The only panel will not see the check in and cancel the meeting after a set period (10 minutes, etc.). This is a major flaw as other panels can handle this configuration (i.e. Crestron running Robin app).
@janzoetemelk
Жыл бұрын
Hi ✋thanks for your comments☕I have not specific tested that scenario yet but maybe with an auditorium or large room with multiple entrances you dont even need a check-in button (so you can turn it off in the setting or via TAC if needed)... as would be rare if nobody shows up ... Keep me posted on any findings.. JZ☕🔧
@itskenthomas
Жыл бұрын
Definitely have that feature disabled for auditorium spaces. However, we do have multiple entrances to our training rooms. To be clear, this is a Microsoft feature that's missing, not Poly.@@janzoetemelk
@DenizCapkan
6 ай бұрын
Thanks for the great video, Jan. Can you please let me know how we would connect a poly sync 60 to the following setup: Poly X70 + TC10 in teams mode?
@cricketworld4860
3 ай бұрын
ya......i also need this setup
@janzoetemelk
2 ай бұрын
@user-rk8qw8jm7l hi 👋 I recommend the table extension mic for X70 (with ext cable kit up to 30m). You can configure then to use both table and build-in X70 mics.. even seen table mic placed to the ceiling not something official but seems to work🙏.. hope that helps JZ☕️🔧
@ianiovski
10 ай бұрын
Hello, I have a problem with a second Poly TC 10 tablet, after running an update, the tablet starts downloading the update, installs it and says that it will restart, as you showed it in the video, but after the tablet restarts, no turns on more, the screen is black and there is no indication. I will definitely use it a second time. The tablet is connected via a Mikrotik switch with PoE. I have updated two TC 8 tablets and an E70 camera through it and I have no problems. Can you give me some advice or direction, because I guess they will replace this tablet as well, but the way it's going it will end up with the same thing ?
@janzoetemelk
10 ай бұрын
Hi 👋 did you manage to get TC10 correctly working? It should be pretty straight forward... in case of issues there is a PIN 📌 in the back todo a factory reset and retry... ☕️🔧JZ
@itskenthomas
Жыл бұрын
What software are you using to remotely connect/display the panel?
@janzoetemelk
Жыл бұрын
Thats a great question. 🤗I am using a special software build on my TC10 to make those videos this is not available in the public software. ☕🔧
@Fluxboxuk
Жыл бұрын
Is this something poly are releasing for customers at some point, Neat have this in their pulse management console and it would be a fantastic addition to lens
@itskenthomas
Жыл бұрын
Agree@@Fluxboxuk
@janzoetemelk
Жыл бұрын
@@FluxboxukGreat feedback! I agree would be a great additional to Lens but I also understand there is already a big list of features for Poly Lens also understand remote connect is something Microsoft is investigating for the Pro portal so left or right we will get there 🤗. I can just recommend if you hear these request for any features from customers the more please talk about it with your local Poly team to make sure it gets prioritized correctly. Again thanks for your comments keep them coming... JZ☕🔧
@annehipolito7305
Жыл бұрын
Will the 5.0 update be available if i reset the TC10? We have 2 units of TC10 and we are using the X70 with 1 TC10 as controller but we cannot use our other TC10 that is supposed to be our SCHEDULER panel since no option for teams is showing.
@janzoetemelk
Жыл бұрын
Hi ✋thanks for your comments. You are correct in case you factory reset your TC10 (pin on the back) it will automatically prompt for a standalone update this will be 5.0 in case you plan to use it as Teams Schedular. In case you will pair it with Studio X then please keep the current version 4.x on TC10 so that X and TC10 are at same software level. Great point Ill add this to the next video update... JZ☕🔧
@annehipolito7305
Жыл бұрын
@@janzoetemelk thank you and I was able to do it. My only problem is that when I selected it as a stand-alone scheduler, I don't see the code showing up just like yours, there was an error saying "Couldn't connect to workplace join. Try again or contact your administrator."
@janzoetemelk
Жыл бұрын
Hi 👋 that's one I have seen earlier "can't connect to Workplace join". Based on my tests this error usually indicates that the signed-in user has reached the device limit in Intune/Endpoint Manager. Try remove in Intune/Endpoint Manager all the logins or higher the number of allowed sign-in devices , check intune license, block Android Enterprise (work profile) for this user as usually only Android Device Administrator is supported etc that should help.... let me know.. JZ☕️🔧
@colinmelhuish71
9 ай бұрын
How about mounting on a glass wall?
@janzoetemelk
9 ай бұрын
Hey thanks for your message. You can mount the TC10 on a glass wall directly with strong tape (not supplied in the box) or using an TC10 optional glass mount see here a reference bit.ly/3RPqTIc JZ☕🔧
@itskenthomas
Жыл бұрын
16:09 Where do you set the Room Equipment?
@w3zly
Жыл бұрын
This is done through the room resource account in Teams Admin Centre
@janzoetemelk
Жыл бұрын
Great question. As mention this is done via room resource account not something you configure local on the device. This would give the opportunity without disturbing anybody in the room what room equipment is available to use like whiteboard, video equipt, wireless sharing etc.
@cuongnguyenquy8583
Жыл бұрын
How we setup the meeting sensor to detect the people on the time with no one come with poly teams room device?
@itskenthomas
Жыл бұрын
Not seeing any option in TAC to add equipment@@w3zly
Пікірлер: 27