Brady Haislet, 3M Application Engineer, walks through how to set up PPS Series 2.0 with the Performance Spray Gun.
Important notes (00:41)
Wear proper PPE: safety glasses, protective gloves, respirator and whatever else you need for the job. This video is intended for a professional setting such as a body shop or paint shop. Make sure to check OEM recommendations to confirm you’re using the correct adhesive for the job.
Select Your Cup (00:12)
Start by selecting the proper cup and liner for the job.
Insert Liner into Cup (00:28)
After you insert the liner, you’re ready to add the coating you need to apply.
Locking the Lid in Place (00:37)
After you insert the liner, you’re ready to add the coating you need to apply.
Securing the Cup to the Spray Gun (00:57)
Attach the cup to the spray gun and start spraying.
Important note:
There are of course many factors and variables that can affect an individual repair, so the technician and repair facility need to evaluate each specific application and repair process, including relevant vehicle, part and OEM guidelines, and determine what is appropriate for that repair.
This video may show products not available in your area.
Products used in this video:
3M™ Performance Spray Gun System with PPS™ 2.0
www.3m.com/3M/...
3M™ PPS™ Series 2.0 Spray Cup System Kit
www.3m.com/3M/...
For more advanced tutorials, check out 3M Collision Repair Academy
www.3m.com/3M/...
You’ll find courses that will expand your knowledge, deliver practical procedures that you can use right away, and, in many cases, earn you I-CAR credits.
Safety and warranty information
www.3m.com/3M/...
Website: www.3MCollisio...
Instagram: / 3mcollision
Facebook: / 3mcollision
Twitter: / 3mcollision
Негізгі бет Tech Tips: PPS Series 2.0 Setup with Performance Spray Gun
Пікірлер: 6