I have been running these for about 2 months on the civic. I combined these with camber plates and Skunk2 and Energy Suspension parts. Absolutely amazing feel. So sharp in the corners. Smooth on the straights. Stiff but not harsh. A huge improvement over stock. Thanks for the review.
@crtmojo2705
6 жыл бұрын
I also recommend AMR Engineering radial bearing upper spring seats. I used these to match up the front coilovers to the camber plates.
@MrRobear
6 жыл бұрын
Thank You for watching!
@WelshyAutomotive
5 жыл бұрын
What civic did you install these on?
@Thefortnitekid15
5 жыл бұрын
I have these and have had problems since. Especially with track rod end and apparently need adjustment lower arms as the tracking is all out. Also since adjusting the height have know acquired a slight twang now and then when turning right or left
@crtmojo2705
6 жыл бұрын
Just put these on about a week ago. I added aftermarket camber plates and radial bearing upper spring plates on the fronts to finish the assembly. Feels so nice. Super easy to build yourself. I need better seats because the turning Gs have increased.
@K03sport
6 жыл бұрын
Still valid 1.5 years later; thanks for the heads up and quick spotlight...I think I will check you out... 👍
@cebuwulfkiba2495
6 жыл бұрын
"Can stroke pretty much twice as fast and the fluid will not foam up" that's what she said.
@jiakabery3550
5 жыл бұрын
TEIN for the win! I have the Mono Flex. Old school made in Japan 1 piece. I think they might be called Mono Sport now.
@millertimedude
6 жыл бұрын
Dude, EPIC review. You've just made a new customer.
@nevrlow
2 жыл бұрын
I’ve had the basis z on my Miata now for about 3 years. They are decent and anyone looking to stay within a budget, these are the ones. Use nb top hats if you are installing these on an na.
@ryanbaggarly9046
2 жыл бұрын
Nb?
@jamessanderson3498
2 жыл бұрын
How did u keep shaft from spinning as I install tophats
@michaelfoltz8568
3 жыл бұрын
Just got mine and they will be installed on my 1 owner 2003 Honda Civic ....extremely clean and will be the bad ass civic in the AV.....YEP !!!!
@jamessanderson3498
2 жыл бұрын
How did u keep shaft from spinning as u install top hats
@TheFelt13
7 жыл бұрын
Great review! im confident i want to buy this exact set up now! lexus is300 here we go
@carloss8757
7 жыл бұрын
did you end up getting them? I also have a is300 and was wondering how they ride. I've heard it can get bouncy?
@TheFelt13
7 жыл бұрын
brooo its like having a lowrider that how bouncy it is!! haha no jk man i love them they are so sick and they ride perfectly man its just right ive been riding with a 2 inch drop i dig it but im going to go up to 1.5 inch drop or maybe 1.7 inch drop if i can make sure my math is right lol but ima put new tires on and i dont have a camber kit so im going up in height for that reason
@Jenseneicher
5 жыл бұрын
@@TheFelt13 how are they holding up now lol
@samw
2 жыл бұрын
@@Jenseneicher i’ve got Street Advance Z’s (same as basis featured in the video but with dampening adjustment) and they ride quite well, a little stiff on the stiffest adjustment but not too bad, great for my daily is300
@Jenseneicher
2 жыл бұрын
@@samw thanks for the reply. I actually ended up getting them for my car, driving it for two years and now have sold it. Great suspension honestly! Thinking of getting them again for my new car
@jaysonjay7852
6 жыл бұрын
Thank you so much for this update. Explained the twin tube design very well. I am pulling the trigger on them soon :)
@rampagevlogs7713
7 жыл бұрын
I can't wait for you to make a new video ROBERT I ❤you uncle
@s2k90650
6 жыл бұрын
They're build in Taiwan... They started manufacturing entry level/street coilovers in 2014/2015
@derubersoldatx
6 жыл бұрын
Excellent, since first time I seen the brand always wanted to give it a shot, now my oem struts are gone bad -and I am in a budget- so yeah baby tein here I go. Excellent article. Thanks
@Yeer718
6 жыл бұрын
My preload was never set when mine were installed. They were just slapped on. How can I adjust my preload, and if I change it from having none, will it raise my car?
@MrRobear
6 жыл бұрын
kzitem.info/news/bejne/rn-qtIGrnJ-Topw
@jin5632
3 жыл бұрын
The basis Z doesn't have preload
@Yeer718
3 жыл бұрын
@@jin5632 no wonder they were so shit. Glad I switched to bcs on my miata
@nickpollock9714
3 жыл бұрын
@@Yeer718 how the bc coils feel. my basis z are shit and bouncy
@Yeer718
3 жыл бұрын
@@nickpollock9714 better than stock
@RigoStar1931
5 жыл бұрын
So how do you set the preload for these specific street basis? you only showed how to adjust the ride height?
@bassicuk1986
6 жыл бұрын
I've just had some of these installed on my Lexus is250 They are so bouncy. Definitely not comfortable. What have we done wrong?
@MrRobear
6 жыл бұрын
yes, they tend to be softer than other coilovers on small bumps. In turns is where they will tighten up.
@Nickmann28
5 жыл бұрын
My Tein Street Advance Z have about 30 possible clicks to adjust dampening. Is this normal? The manual says it's supposed to be only 16 clicks.
@kartom4464
5 жыл бұрын
I can't find these even on Teins website. I only see the older model, not the new sealed model coilover.
@saucyscrewdriver4008
6 жыл бұрын
Great video
@cesariglesias6220
4 ай бұрын
i already have coilovers on my car but dont have the oem mount would i have to order a new one or us the one on my coilover
@THERIPPER216
6 жыл бұрын
Is there a preload adjustment on the street basis
@blackchallis
7 жыл бұрын
Just ordered a set for my 350z, UK based, so lets see how they do
@leo-hn8bf
7 жыл бұрын
blackchallis how are they so far??
@BugsBunny_xD
6 жыл бұрын
Any news?
@Sam-mw5hx
6 жыл бұрын
Bro answer
@ElMaestr0Xavier0
6 жыл бұрын
How is it ?
@6ixgenesis842
5 жыл бұрын
Legend has it product still is still shipping
@justincoffey7429
4 жыл бұрын
So I'm looking at the body of it and don't see a collar to allow the body to thread up and down to actually adjust the height...so I'm assuming the only way to adjust height is to compress the spring....which would jack up the correct preload rates, no?
@skydyleyw0037
6 жыл бұрын
these should fit on a lexus sc300 but i noticed you guys dont have lexus on your Make Chart
@yalman32
7 жыл бұрын
so did they use china steel vs Japanese steel?
@msknuked
3 жыл бұрын
Very helpful
@alien-oo-_-oo5732
6 жыл бұрын
Noob question, theres no camber adjustment on these? Not sure if all coilovers have it or only certain ones.
@jamessanderson3498
2 жыл бұрын
Any tips on keeping shaft from spinning as u install top hats
@tripanis16v
7 жыл бұрын
Hi what about the top mounts?? we use the stock ??
@MrRobear
7 жыл бұрын
Basis Z & Advance Z you will re-use your OEM top mounts. Only Flex-Z and Monosport offer billet upper mounts. I hope that helps
@gavincox3194
5 жыл бұрын
Okay I’m confused when you buy them does it with 4 or just 2 I feel stupid asking but I need to know
@Thefortnitekid15
5 жыл бұрын
Front and back.. from demon tweeks anyway
@Jrhymee14
5 жыл бұрын
Just got these, don’t have camber arms for the coils, how much natural camber would these give you without any adjustments?? TIA!
@IndagatorAD4
8 жыл бұрын
Does it still come with 4 x Bump rubbers and 4 x Dust covers? I'd assume so?
@MrRobear
8 жыл бұрын
Yes correct
@jakethesnake1503
4 жыл бұрын
If you leave in an area with winter and salt, you want to reuse your oem mounts
@spongiform
3 жыл бұрын
Why?
@lexmichael2040
5 жыл бұрын
I have the same set thats going to put up on my car next week, woooohhhhh can’t wait
@ibanezrg320fm
5 жыл бұрын
How do you like them?
@AK47-Addict
3 жыл бұрын
Updates?
@lexmichael2040
3 жыл бұрын
Ak47addict they’re pretty nice just make sure to get the one that has dampening adjuster
@AK47-Addict
3 жыл бұрын
Oppai Sama so you didn’t get this exact model (Street Basis Z), since it doesn’t have dampening adjustments. Which model did you get then?
@lexmichael2040
3 жыл бұрын
Ak47addict I did get the w/o they’re fine and then I switched witht the one with dampening adjusment and they’re great
@dynaway
2 жыл бұрын
can i check with you if the Tein Street Basis for the 2007 Honda Accord Euro R ABA-CL7 does it comes with the HID auto-leveling sensor bracket on the front left?
@jeronevincentken4873
6 жыл бұрын
Hi friend I'm using gecko suspension system on my 2004 Honda stream now it started to bummed on ruff road what can i?
@TheSupremeDominator
6 жыл бұрын
So you basically just adjust height and that's it?
@MrRobear
5 жыл бұрын
Yes, they are height adjustable and self dampening
@nicorocks321
6 жыл бұрын
How do you set preload if the collars are used for height adjustment too?
@JMcLean69
5 жыл бұрын
pandanicoo that’s my question. My springs are loose when I jack up the car. If you have solved this please help me.
@po.russki
7 жыл бұрын
Should I get these or the Godspeed Mono-SS?
@P1ST0N580
4 жыл бұрын
You get all four coil overs correct?
@jhititup
7 жыл бұрын
I bought the tein street advance for my is200 and i am having problem with the installation some dont seem right with the fitting where the spring meet the Aluminum spacer and spacer meet the OE mounts. Do the Dust Boots that came with the Tein Coilover go at the back cause the oe fronts mounts have it owne Dust Boots already?
@dynamn
4 жыл бұрын
so the camber and caster are unadjustable on theses?
@greenman8
4 жыл бұрын
Ugh, am waiting on my set. Kinda bummed over China vs Japan MFG. Been waiting since July 6th and it still hasn't shipped. Megan Anti sway bars are also on wait, different merchant, but I got a letter explaining this. I expect my coil overs are in the same boat (no Pun intended).
@jin5632
4 жыл бұрын
How do I adjust camber on those ?
@RBM569
7 жыл бұрын
Does this have dampening adjustability
@MrRobear
7 жыл бұрын
no, just height adjustment. re-use oem top mounts
@AX-xi2pw
5 жыл бұрын
I think street advance z have damping. Not 100% sure tho
@MarkBeLike
6 жыл бұрын
Are these compatible with edfc?
@jacobwood3965
5 жыл бұрын
I need some help my kit didn’t come with a damper tool are they all supposed to
@MrRobear
5 жыл бұрын
Contact who you ordered from, and they should be able to have TEIN send a replacement
@cooliecrewspeedshop
6 жыл бұрын
I have installed my coilover set but the rears seems to look odd. There is no top mount for this set so I reused my OEM mounts. When I jack up the car, looking inside from the trunk the coilovers look normal but when I release the jack the piston rod in the coilover protrudes from the interior and the mount does not sit flush.when I push down on the trunk you can see the piston rod bounce out of the top mount.
@hellothermo6245
6 жыл бұрын
Where would you buy the strut
@EvilJ069
3 жыл бұрын
I want that clone statue
@boostgaragebuilt1363
7 жыл бұрын
Is there anyway I can get main parts of the tein coilover like if I'm going to "rebuild" some ?
@rampagevlogs7713
7 жыл бұрын
You should have a fidget spinner video and you can talk about how it works and how it is built. Other then that your going to be a hit 👋😜
@He_Is_Risen
7 жыл бұрын
This model of tein coilover you are talking about is this one right? Tein gss60-8uss2. Because I want to get me some for my 04 wrx
@MrRobear
7 жыл бұрын
Yes, they will re-use the OEM upper mount
@bilskie9066
5 жыл бұрын
So I have the tein street basis z for my Scion tc 2015, and since day one I’ve put them on, I’ve been hearing a loud bang noise in my front suspension every time I’d turn left or right, please give me some suggestion what might be wrong with it
@geezeus3446
Жыл бұрын
Did you ever figure it out? I got the same problem with them on my brz
@Enduro_NY
5 жыл бұрын
So I found Billet upper strut mount fully adjustable do you think that will work with these on a 2002 civic? I don't wanna spend $100+ for them just to not work and I kinda don't wanna go with the adjustable upper control arm
@MrRobear
5 жыл бұрын
Im not too sure, because TEIN has a specific diameter strut top, which may determine if your upper mount will work.
@kanereamy6854
6 жыл бұрын
Any way you can remove the bottom collar? To go lower?
@Gus_Golf
6 жыл бұрын
kane reamy i have removed the bottom one on my fronts and im gona install them again this weekend. Feels far to soft now
@danielvega2069
7 жыл бұрын
can I lower these all the way without any preload ? has any one tried lowering the farthest they would go? and how did it go for you ?
@MrRobear
7 жыл бұрын
You can, but the ride will be extremely SHITTY!
@fahimamjad8818
5 жыл бұрын
How to adjust stiffness of this coilover?
@MrRobear
5 жыл бұрын
You cannot adjust the stiffness on the Basis Z. Only the ride height
@brianpacheco5218
7 жыл бұрын
Where do u buy a single strut?
@MrRobear
7 жыл бұрын
TEIN directly
@Lowcu2
6 жыл бұрын
Could you still add a camber kit to these?
@MrRobear
6 жыл бұрын
Yes, i suggest to use a camber kit anytime you lower your vehicle
@Bulk_Bullets
6 жыл бұрын
How many miles do these coil overs last before i have to replace them?
@MrRobear
6 жыл бұрын
i have seen some TEIN on cars for 30k+
@kalannorman3275
4 жыл бұрын
My set just came in. Would you recommend that I just buy new OE upper mounts rather than reuse the current ones? (2010 scion TC. 92K )
@GHOST-gv7he
4 жыл бұрын
You should ALWAYS replace the mounts. If the strut bearings are bad it will affect the quality of the ride...such as binding in the steering... I learned that the hard way lol.
@kalannorman3275
4 жыл бұрын
@@GHOST-gv7he thanks a lot man. I appreciate you getting back to me
@GHOST-gv7he
4 жыл бұрын
@@kalannorman3275 you're welcome
@jonathanrivas412
3 жыл бұрын
Hope you went with new upper mounts. I got my car with these installed and they used nasty OEM mounts. They were old and just busted recently. So now I have to take my struts out and replace the uppers. They completely failed and one of the struts is now out of place
@marcyoungsma8736
7 жыл бұрын
My front right is popping on my 2007 civic si coupe any recommendations?
@MrRobear
7 жыл бұрын
sounds like pre-load is off, or top hat is not seated correctly.
@yourmommashouse
7 жыл бұрын
marc youngsma 7 inner or outer tie rod or sway bar end link, I had same problem.
@menjanganresort8494
7 жыл бұрын
realy thats work ?
@forrestdillard
7 жыл бұрын
Okay, so correct me if i'm wrong. but could you put a top hat on it from like a better model where camber can be adjusted?
@CesarPerez-ck7ci
7 жыл бұрын
Forrest Dillard yes as long as the top hat were to fit your oem strut then it would work on this
@StraussGaming
7 жыл бұрын
what is the max drop in height for these coilovers?
@MrRobear
7 жыл бұрын
about 3" realistically. They do not drop the lowest on the market. more streetable.
@yardman0001
6 жыл бұрын
How do you raise it lower ?
@N1GHTH4WK97
3 жыл бұрын
Could not process request. Died immediately
@christopherrogers8316
6 жыл бұрын
i want to buy a set for my ep3 civic, how low can i go?
@MrRobear
6 жыл бұрын
safely 2.5" all around
@kjoshuacrisostomo5655
6 жыл бұрын
Is there any way i can make the ride stiffer
@Blaqs1
6 жыл бұрын
KJoshua Crisostomo put a stiffer spring I run 20k in the front and 18k in the back is super stiff
@333krook
6 жыл бұрын
Kuo Huang stupid question... but where do you buy springs with different rates? Thanks
@BODenKai
7 жыл бұрын
i thought these were manned in the states........no?
@VerticalGamingStudio
7 жыл бұрын
No, originally all made in Japan, but the Z line are all made in china. Keeps prices down.
@Iraqveteran-ke6qu
5 жыл бұрын
I’m looking to keep my ride height but get a little more cornering performance in my LS400. What coilovers do you guys recommend?
@Jenseneicher
5 жыл бұрын
found anything? looking to do the same
@bman409
5 жыл бұрын
You might as well just go the strut and spring route.
@swervv2957
4 жыл бұрын
Jensen Eicher ME three!
@egboi6477
7 жыл бұрын
Could these be set at stock ride height
@MrRobear
7 жыл бұрын
no, they are about 1" lower than stock at there highest setting.
@debo130
6 жыл бұрын
Can you adjust preload?
@uhFluxy
4 жыл бұрын
They’re just ride height everything else is pre set
@xBlissfulx
7 жыл бұрын
have these and im having an occasional small clunking noise in my front right wheel when i turn the wheel slightly any one know what it might be? it doesnt happen all the time just sometimes
@danielvega2069
7 жыл бұрын
Rene Garcia do you have them dumped all the way as low as they can go?
@xBlissfulx
7 жыл бұрын
Daniel Vega no can still go an in. and a half lower up front and an in. in the back
@xBlissfulx
7 жыл бұрын
havent done any alignment still since im ocasionally changing it to find the perfect height for my daily driving and havent checked any other components but funs fine i have the front slammed all the way it can and the rear with like half an inch left and havent had any problems with them
@xBlissfulx
7 жыл бұрын
Probably around 10k on them maybe a bit more i recommend for starting but if for a real long term id recommend another higher end coil system a more comfy one
@jah2mon
6 жыл бұрын
Make sure your top hat is aligned properly. It's an alignment issue or a strut bearing problem.
@EvilJ069
3 жыл бұрын
"T-EYE-N" not "Tane"...
@thicculousmicculous
6 жыл бұрын
Hello Friends I have a base model 2009 subaru impreza wagon will these fit my car? Thanks for any help in advance im pretty new to this car stuff😊
@gabrielalarcon4304
7 жыл бұрын
Are these the tein coils that go for $460 ???
@MrRobear
7 жыл бұрын
Maybe, all depends on the vehicle.
@sticklebacketienne
6 жыл бұрын
Yeah they're the ones you're thinking of
@decepticonleader316
7 жыл бұрын
after the coilovers break in how much lower will it drop.
@MrRobear
7 жыл бұрын
shouldnt sag more than 5mm
@dustingeorge8532
7 жыл бұрын
do these come with shocks or do i need to buy shocks?
@MrRobear
7 жыл бұрын
The TEIN Street Basis Z Includes 4 x Shocks & 4 Springs. Just re-use the OEM upper mounts.
@ajbullies2015
6 жыл бұрын
If I give it a like amd share and subscribe do i get discount ill order one now off ebay
@dahglock5909
6 жыл бұрын
Just install these Tein on gs430. They are too bouncy. My suggestion is spend the few extra dollars for better coilovers.
@MrRobear
6 жыл бұрын
Make sure they are pre-loaded correctly.
@michaelbermudez3627
5 жыл бұрын
@@MrRobear how? All u showed was the ride height on these. And it looks like with these if you were to lower it to the max then it would shorten the strut travel
@manuelcortez9585
7 жыл бұрын
What's the drop on these ?
@MrRobear
7 жыл бұрын
up to 3.5" safely
@steelhead197
5 жыл бұрын
Junk........👀
@mrpsd590
7 жыл бұрын
stop dude.. just stop.
@gianniclempson6244
6 жыл бұрын
What’s the stiffest spring rates you can run on these shocks would they take a set up of 9-12kg
Пікірлер: 162