This whole time I've been wrapping grips incorrectly (starting at the bottom but using the wrong end of the tape). I applied a replacement grip after watching your video and this is by far the best wrap job I’ve done.
@tenniswarehouse
3 жыл бұрын
Glad that this was helpful for you! Troy, TW
@strawbewwy
5 жыл бұрын
nice video but should've included the beginning of the wrapping, most amateurs tend to have a hard time making it nice and flush and it would help to explain some tips on how to get it started so there's no like overlap/wrinkles
@yesnz5641
4 жыл бұрын
Exactly!
@lifeoftennis1285
4 жыл бұрын
Yeh, that woulda helped, but I guess as it’s not explained in the video I can try? All you gotta do is stretch the grip nicely, press inch-by-inch, till you’re able to go 3-4 levels down, and then you won’t have to stretch it too much and will be able to press the grip 3-4 inch-by-3-4 inch
@eminakaratas11
2 жыл бұрын
Yeah, kinda dumb from him for not showing the beginning which is actuaöly the hardest part
@nataliemcmahon3965
2 жыл бұрын
@@lifeoftennis1285 Thanks for the stretching tip! Made all the difference!
@M1ke10191
4 жыл бұрын
"How hard could this be?" *Me, after 3 failed attempts and the racquet not exactly looking factory* "Alrighty then. Screw it, looks close enough."
@wolleo4818
4 жыл бұрын
The most difficult part for me is the start and when you begin winding with an angle - unfortunatly this was not shown. Other than that - great video 👍
@georgemallory797
3 жыл бұрын
Fantastic. Didn't insult my intelligence OR assume I already know certain details. Perfect video. Thanks a bunch!
@Dantheman_26
3 жыл бұрын
If you don’t have the finishing tape electrical tape works fine too. Just a tip to future people.
@speechless1883
3 жыл бұрын
but it doesnt grip. it will slip. my coach was so glad when i finally got a real grip
@hiphop296
3 жыл бұрын
@@speechless1883 hes talking about the finishing tape at the end. To hold the actual grip together
@narutosfrienddeku4328
3 жыл бұрын
Thanks.👍
@PROUDxRUSHxDENIER
2 жыл бұрын
Vinyl electric tape wont last month in the sun. Might as well say put oil on the handle, So bad advice. In your reply, you will say "it stays on for me". They made tennis grip tape for a reason. Both the same price as high quality vinyl tape vs tennis griptape of decent quality. For the future, dont take this tip. He will hope u have a slippery racket when he plays a game with you!🤣😂🤣😂
@Dantheman_26
2 жыл бұрын
@@PROUDxRUSHxDENIER I was talking about the finishing tape and if you’re still saying that it won’t last I’ve kept mine on for five months and it’s still fine. I’ve edited my comment. My bad.
@gobika100
2 ай бұрын
Very clever way how you finish the wrapping with the 2 dots; i am going to try this
@CaraArtman
5 ай бұрын
thank you for this, very helpful! especially the part where you dot the grip.
@technocracylao
4 жыл бұрын
Just used this as a guide to do a replacement on my sons racket, however, it turned out I didn't really need it and I have to highly recommend the Wilson replacement grip as not only is the grip marked to show the overlap but also the cutting line at the end is marked. 5 minutes later and it's just like it came from the factory. Also I'd highly recommend getting some Shellite (lighter fluid) and cleaning all the factory glue so there is no bumpy remains underneath.
@geertschattenberg4437
22 күн бұрын
Very nice that Floyd makes the difference between right- versus lefthanded players. I am not sure if everyone understands the staple issue... However: a very nice instruction, thanks you Tennisware house and give my love to Bethanie Mattek Sands!!
@kaoushik11
4 ай бұрын
I just replaced the original grip for my Pure Strike 18x20 (Version 1) after watching this video! Was super helpful, thanks!
@tenniswarehouse
4 ай бұрын
Awesome, glad we could help!
@AceyMan66
4 жыл бұрын
I cannot wait for Episode II, where Troy shows all the parts of re-gripping that are *actually tricky*. Like the first two-and-a-half wraps on the buttcap (which is actually what I came hoping for). Also, it would be nice to see how it goes when you staple the starting end: What bevel do you put it on? Where do you locate the staple? Can you get buy with a J-21 or T-50 hand stapler? These questions remain a mystery until we get a "deep dive" on those parts. (Also discussing grip weights, and how to weigh the old grip, then the new one, so you'll know the grams you're likely to add. (I trimmed about 3 gm to finish the top nicely, so that kind of thing is useful to plan for.) Cheers, /Acey
@sinaisinai43
4 жыл бұрын
You don't need the staple. Bevel does not matter, however be consistent amongst your racquets. Angle the start of the grip a little inwards so that it doesn't come unraveled. Make sure you cover the entirety of the very end of the buttcap, 360 degrees. Pull the grip just tight enough so that it comforms and there are no bubbles. Do not stretch the grip to the point of deforming. Then begin to angle upwards. The overlap is up to you, however there is often a line to follow. Try to get into that pattern as soon as you can. Proper overlap is actually a slight "underlap". You do not want the grip to be entirely flat. If you look at a stock grip you'll see what I mean. After the buttcap part you can pretty much wrap with the tension of a regular overgrip. If you still have questions come drop by my discord and I'll be happy to help: discord.gg/7b8FG6
@loonaya
4 жыл бұрын
One 16th of an inch. What the hell is that. That's ridiculous :) Say no to imperial units :P
@xXBooBearrXx
4 жыл бұрын
😂
@floatingantipodean
3 жыл бұрын
Haha I thought the same 😅
@beachdays561
2 жыл бұрын
Maybe 1/870th of a foot is easier?
@WestparkRugrats
5 жыл бұрын
Now that’s how it’s done! Thanks for sharing.
@chenwd9106
5 жыл бұрын
Thanks so much. I always thought i need to use every last inch of my grip so i let them overlap too much. Never thought of cutting the extra off in the end
@yesnz5641
4 жыл бұрын
I would have liked to see the very beginning of the wrapping...
@ironlionzion2265
2 жыл бұрын
awesome. I don't often play tennis but I've collected some vintage Racquets from the 80s, going to rewrap it 😎🤙🏽
@sarahgood4823
4 ай бұрын
Thank you, very helpful! First time doing this, and it was easy to follow :)
@user-vg7kb3yj7g
2 ай бұрын
Thanks for this practical instruction,great video!
@perspicator5779
2 жыл бұрын
Nice! Even though a simple procedure, good little tips for better install. Thanks!
@tess3857
11 ай бұрын
Thank you! this was super helpful for me changing my first grip :)
@matsvanaanhold398
2 жыл бұрын
Finally replaced my old grip and this video helped a lot, thanks!
@NsteveA
5 жыл бұрын
Thanks, Troy! I wanted to switch to a thinner grip and this was really helpful!
@aal-e-ahmadhussain3123
4 жыл бұрын
Beautiful. Will be using this technique to wrap a gamma leather grip into an archery bow inshaAllah 👍🏼
@warzoneis-life1668
3 жыл бұрын
This was a really good help thank you especially for beginners
@samsly8464
Жыл бұрын
My wife needs to get a grip..
@lukpascal
Жыл бұрын
Many thanks!
@MrAlbertet
2 жыл бұрын
Thank you! The dots are usefull!!!
@jonkerrobin
3 жыл бұрын
Mooi griptapie erom gedaan met jaarclub genoot. 10/10, mijne zit er beter omheen. Die van rik is dik.
@Ahelow
4 жыл бұрын
Troy, as a fellow lefty, do you ever wrap for lefty?
@tenniswarehouse
4 жыл бұрын
I used to always wrap my grips lefty, replacement grips and overgrips, a long while ago. But then it got to the point where I just became used to how the racquets come stock, wrapped for the majority, which is right handed. Another reason being that when we playtest racquets, we usually share one frame between 4 testers, so I just go with the right handed grip for the group. Troy, TW
@TrandaRecord
2 жыл бұрын
Thank you!
@humanentity2214
3 жыл бұрын
What a smooth video, well done TW
@jorgeandrescoppiano
4 жыл бұрын
Hello Troy! How is it going man? Hope you and you loved ones are doing good. What’s the weight and the thickness of the Wilson Sublime and the Pro Performance base grips?
@M0rdFustang
2 жыл бұрын
This was super useful, thanks
@lawrenceconway807
3 жыл бұрын
Assuming the use of an overgrip how often should you replace the replacement grip?
@tenniswarehouse
3 жыл бұрын
I think it is more of a feel thing, when it comes to that. Since most of us use overgrips, we don't frequently change our replacement or base grips. I think after a long period of time the grips starts to lose some of its cushion, or becomes more firm, and maybe at that point it could use a replacement. Definitely would change it is the adhesive is no longer holding, and the grip is coming off or separating. Troy, TW
@sinaisinai43
5 жыл бұрын
Thank you for the tutorial, but I notice you've lost some of the flare at the end of the buttcap. Doesn't that directly affect the feel?
@tenniswarehouse
5 жыл бұрын
The flare was similar before and after the re-gripping. These Dunlop racquets do not have much of a flare to begin with. If you want to add some flare to the butt cap, you can wrap some layers of athletic tape, prior to applying the replacement grip. Troy, TW
@brianblackie9434
3 жыл бұрын
Thanks bud. Worked a treat!
@tomv8188
Жыл бұрын
I always put the tapered side up lol. So that the sticky bit on the end would stick on the handle. Is that bad?
@tenniswarehouse
Жыл бұрын
I think the cleanliness of the starting wrap, and not having too much overlap with each turn is most important, so that it doesn't feel bumpy, or lumpy. Other than that if it feels good in your hand, and hopefully still retains some of the shape, and feel of the pallet underneath, then it really comes down to your preference. However, if you are in the industry or do home stringing/customization for other clients, then usually you want to stick with the industry standard, or as close to the factory gripping as possible. Troy, TW
@johnnydo1620
5 жыл бұрын
Wait so any normal racket do you add a new grip over the one it comes with pre made or do you peel that off before applying the new one
@yutaegil4944
5 жыл бұрын
A racket comes with a stock ‘base grip’. You can add an overgrip over that grip. In this video, he mentions how to remove and replace the base grip.
@tenniswarehouse
5 жыл бұрын
@Johnny Do, This video is to replace the stock grip that comes with your racquet, typically you would do so if it is worn out/dirty. Most of the time, you don't need to replace the stock grip very often, if you use overgrips. Overgrips are very thin, and do not have adhesive on the back of them, as they are designed to be wrapped on top of the stock (base) grip. Troy, TW
@NateWolfKira
3 жыл бұрын
Very helpful.
@dolphin9876
15 күн бұрын
Really good video 😊
@wyattyote2481
3 жыл бұрын
I'm a bit slow lol when you take the old wrap off the handle is there still cushioning on it or is it just the bare hard handle? My old grip is sort've tearing and it seems there's a weird cushioning under it that may be tearing as well so I'm not sure if that must come off as well or if it's still just the wrap (nvm I am slow lmao it's just a rlly thick wrap that I have on it)
@tenniswarehouse
3 жыл бұрын
If you are removing the current or existing stock grip from the handle, you would ideally want it to come all the way off, leaving the hard pallet surface underneath with nothing on it. Then you would start to wrap, or install the new grip, on that clean hard surface. Troy, TW
@sinaisinai43
4 жыл бұрын
Does it take a while for the replacement grip to properly mold to your hand?
@tenniswarehouse
4 жыл бұрын
Not typically, I usually find them to feel good right away. Troy, TW
@davidglover9210
4 жыл бұрын
Having put thousands of grips on tennis , squash and badminton rackets myself if you don't slightly stretch the grip when replacing it will probably come loose.
@sinaisinai43
4 жыл бұрын
Is the replacement grip supposed to be smooth or slightly ridged? I know it can be either, but just as far as stock goes.
@tenniswarehouse
4 жыл бұрын
There is usually a little ridge, on the first overlap, but besides that it should feel pretty ridge-less, or nice and smooth. Troy, TW
@themonkeymanofStockbridge
Жыл бұрын
Thanks Bud
@applesforakbar
3 жыл бұрын
Hey Troy - qq for you. I see so many different ways to start the grip, some on bevel 6, some on any short bevel, some halfway on the longer bevel and like this one at the start of the longer bevel. What is the correct way haha? Thanks!
@tenniswarehouse
3 жыл бұрын
Not for certain if there is a correct spot for all racquets. Usually we recommend to find the spot, where the factory stapled the grip at, and use that as the reference starting point for the replacement grip. Some of the more recent Wilson butt caps have come with like a little flap, or clip to slide the tip of the grip into, and sort of anchor the grip as you pull on it, so that usually is a starting point for those racquets. Troy, TW
@applesforakbar
3 жыл бұрын
@@tenniswarehouse Good tip, appreciate the response as always!
@STha-ct5xo
5 жыл бұрын
Hi, do you have a recommendation on which double sided tape to use when needed?
@tenniswarehouse
5 жыл бұрын
We typically use something like a 3M double sided masking tape, and it comes in a roll. Troy, TW
@Sinner.number23
3 жыл бұрын
If i may know ,the finishing tape u use is that a regular electrical tape?
@tenniswarehouse
3 жыл бұрын
You can use electrical tape, but we were using this one: www.tennis-warehouse.com/descpage-GFTB.html. Troy, TW
@Sinner.number23
3 жыл бұрын
Thanks troy..
@thefinalsay8330
3 жыл бұрын
Just found you guys on KZitem! Gona place a order today love your prices!!
@gtptvanbuuren3795
2 жыл бұрын
Thank you
@EternityKX
3 жыл бұрын
Perfect, you're a lifesaver.
@rebelyellyt7801
3 жыл бұрын
What’s the best way to remove the adhesive from the grip handle
@tenniswarehouse
3 жыл бұрын
It depends, if it like most of brands that have a double sided tape on the grips, you might be able to peel it of carefully. But some brands like Yonex who use some sort of glue, you might need a bit more elbow grease, or I have tried using like a putty scraper, that you would find at a hardware store, and maybe a blow dryer to heat up the surface and soften up the adhesive residue. Just be careful if you do use a scraper to not dig into the pallet. Troy, TW
@jonathanchen1026
5 жыл бұрын
Is the replacement grip in the video closer to 25mm or 22mm width?
@tenniswarehouse
5 жыл бұрын
The grip in this video is the Gamma Hi Tech Grip, which is closer to 25mm in width. It is 26.9mm to be more precise. Troy, TW
@thetshirtblog
Жыл бұрын
What to do when old grip has partially disintegrated and leaves a lot of residue on the handle? Thx
@tenniswarehouse
Жыл бұрын
I usually try cleaning it off as best as possible without damaging the pallet or molded surface under the grip. Sometimes I might use like a putty knife, or putty spatula to help scrape off some of the residue, but got be careful not to dig into the surface. I have also tried using our heat gun, to get some of the residue to soften up a bit, and then wipe it or scrape it off. Troy, TW
@thetshirtblog
Жыл бұрын
@@tenniswarehouse Thanks for the tips. I was able to remove some of the residue with by rolling my thumbs and also using a putty scraper. I also got good results with acetone and paper towels.
@RapManCZ
5 жыл бұрын
I am left handed player and I always install a replacement grip like righ handed player (I write with right hand). What would be the advantage to have the grip in opposite direction?
@tenniswarehouse
5 жыл бұрын
It is mostly a feel thing, as the spirals of the grips will be more inline with your fingers, as you grip the racquet. I am a lefty, and wrap my grips as they come stock, for a right hander. Troy, TW
@hunterayers6879
4 жыл бұрын
Thanks
@galahad2000
4 жыл бұрын
Troy - do you start applying the grip on the flattest part of the grip? Also - does TW sell "finishing tape"
@tenniswarehouse
4 жыл бұрын
Usually you want to start the grip at the point where the manufacturer does, which can usually be determined by where the grip stale is at when you remove the stock grip. Yes we do, www.tennis-warehouse.com/searchresults.html#search=products&searchtext=finishing%20tape&opt_page=1&opt_sort=alphaAtoZ&opt_perpage=100. Troy, TW
@ronj9448
3 жыл бұрын
I use electrical tape - holds and you can get colors.
@yabasala5832
2 жыл бұрын
Does normal duct tape work instead of the finishing tape ?
@AdamSmith-fe9jf
2 жыл бұрын
Electrical tape
@tenniswarehouse
2 жыл бұрын
Electrical tape is the best option. Troy, TW
@TikkaMasalaa1
2 жыл бұрын
Wal mart 3 pack black Wilson...ultra wrap 2.97 no need to overpay.❤
@aeroxpre
Жыл бұрын
this is the most beautiful thing ive ever seen
@AcesizOfficial
3 жыл бұрын
Clean 👌🏽
@dimep.7232
5 жыл бұрын
Do you have some suggestions of good replacement grips? I replaced the original grip of my Babolat Pure Drive by the same one (Babolat Syntec I think) but I don't find it very good. I use overgrip on the top of it but the foam of the original grip isn't very durable. I'd like something comfortable (enough foam) but firm not spongy such as some other grips. Some years ago I tried Wilson shock shield grip and found it quite good and comfortable but I can't find it anymore in Europe. Thanks
@tenniswarehouse
5 жыл бұрын
@PierreM BK, I would consider Head HydroSorb Comfort, Tecnifibre X-TRA Full, or Wilson Cushion Pro replacement grips. Troy, TW
@dimep.7232
5 жыл бұрын
@@tenniswarehouse thanks Troy :-)
@rm279
4 жыл бұрын
Babolat Xcel Gel is great.
@jonathanchen1026
5 жыл бұрын
It's finally here
@tannertrace3426
4 жыл бұрын
What is that finishing tape you use ?
@tenniswarehouse
4 жыл бұрын
Each grip, and overgrip you purchase comes with tape to finish off the grip, or you can get a roll of it, like this: www.tennis-warehouse.com/Tourna_Vinyl_Finishing_Trim_Tape_Black_/descpageUNIQUE-UFTB.html. Troy, TW
@the_worst_of_friends924
4 жыл бұрын
How do you replace curved racket grips?
@tenniswarehouse
4 жыл бұрын
Not sure what you are referring to? Curved handle? Troy, TW
@oneeyedollar7727
5 жыл бұрын
Go Pack go! Love the watchTroy.
@tenniswarehouse
5 жыл бұрын
Thanks, Go Pack Go!
@tatsf226
5 жыл бұрын
leather grip is much more difficult to install, please show to install leather grip
@jackramirez9606
5 жыл бұрын
I saw that Wawrinka, Dimitrov, Gasquet, etc, use leather grips. Those are over the replacement grip or they remove it to put the leather one on?
@tenniswarehouse
5 жыл бұрын
@Jack Ramirez, They usually remove it and add a leather grip as the replacement grip. Michelle, TW
@TheMusicianTom
3 ай бұрын
Finally I learnt how to “get a grip”
@jeremiah888888
Жыл бұрын
hOW DID YOU START THE WRAP BETWEEN TIME 2:21 AND 2:22
@tenniswarehouse
Жыл бұрын
Yeah sorry about that, it got cut from the video although that is usually the toughest part. But the key is to pull tight to reduce the bunching up of the grip, and there will be a bit more overlap on that first full turn. Even with factory wrapped grips you will often notice a bit more overlap or a slight bump on that first full rotation around the handle. I will try and do a KZitem shorts video, where I show that part. Troy, TW
@FollowFunk
3 ай бұрын
Skipped the most difficult part which is over lapping the end of the grip thats at the buttcap, while still angling it down to wrap the rest without getting a bubble.
@tenniswarehouse
3 ай бұрын
Yes, it was edited out sorry about that. We did add on a short video knowing that part was missing. Check it out here: kzitem.info_cFFHiulB7c. Troy, TW
@ivanpalaca6230
2 жыл бұрын
Guys i wanna know about putting 2 replacement grips
@tenniswarehouse
2 жыл бұрын
Probably not the best idea, although it is possible, we typically find that you start to lose the feel of the handle, and the shape of the pallet. Troy, TW
@Creees
5 жыл бұрын
Skipping the needle nose pliers at the start was annoying. We had to wwtch you do the whole grip removal which is the most obvious bit and then you skip something which im sure has to have tender care or maybe not
@fabiopergami8582
4 жыл бұрын
As a left hander myself I'm more impressed about how you managed to use right handed scissors ahahahah
@Rickyfyied
3 жыл бұрын
Removed some perfectly good grip off that racket. couldn't find a junk one?
@tenniswarehouse
3 жыл бұрын
We re-used that grip on a racquet that had a worn out grip. Troy, TW
@johnwilson5307
2 жыл бұрын
Wouldn't it be easier to take the old one off, lay it on top of the new one and cut the new one to match the shape of the old one, and then apply the new one.
@tenniswarehouse
2 жыл бұрын
Not necessarily the best idea, because various replacement grips will have different widths. So, if you cut them to the same length, and taper it off at the same point, they won't always end up covering the same amount of the grip, because a wider grip will cover more of the handle each time you wrap it 360 degrees. For example, Tourna Grip is an overgrip that comes in three different sizes, (standard, XL, and XXL). They are all the same length but with three different widths, the wider the grip the more it will cover. Troy, TW
@johnwilson5307
2 жыл бұрын
@@tenniswarehouse yes of course it wouldn't work if the width isn't the same, What is a comfortable synthetic grip??. thanks
@RondelayAOK
5 жыл бұрын
I don't have a supercharged staple gun and my regular staple gun can't penetrate handle. Just rolling on a replacement grip doesn't work for me: in humidity, with sweat, it just slides around until it loosens off. Here's what I do. I sourced copper tacks at the local hardware store (won't rust). I used a drill with a small bit to drill a hole in the handle--the bit width should be a tad less than the width of the tack. Take an awl and poke a hole through the grip at its end. THEN put it all together: tack through grip, use a tack hammer to lightly pound in the copper tack. Really holds.
@8020Alive
5 жыл бұрын
Or just walk into any hardware store in the world and they will gladly let you use a staple gun for a quick staple. Same goes for many FedEx locations world-wide. If you don't want to buy the optional staple gun. Take care.
@OkayDrizzy
3 жыл бұрын
I just did mine, it looks like shit, but I’ll know better for next time ... thanks 🥲
@jonathandavenport2500
3 жыл бұрын
Anyone else here because of Adam Winrich's 15 minute bullwhip.
@msrdanov1
Ай бұрын
1/16 of an inch … only in America 🤯
@snaggletooth14
3 жыл бұрын
Some vids say sticky side down, some say sticky side up.
@tenniswarehouse
3 жыл бұрын
Hmmm, not sure how it would work with the sticky side up? If it is a replacement grip they are using, not an Overgrip, then the adhesive side needs to be touching the pallet to keep the grip in place. If you went with the adhesive up, you would literally be grabbing a grip with tape on it, and the non-adhesive side would not keep the grip in place. So maybe they are talking about an overgrip, which do not come with adhesive attached to the grip. Troy, TW
@abidjauhari
2 жыл бұрын
tidy
@stephenjones8643
Жыл бұрын
You didn’t show the hardest/worst part of gripping the bottom of the handle lol
@tenniswarehouse
Жыл бұрын
Which is why we added this short :) be sure too check it out! kzitem.info_cFFHiulB7c?feature=share Michelle, TW
@Artikulo71
2 жыл бұрын
👍👍👌👌
@kellylatham4562
2 жыл бұрын
Please set up Close caption I'm deaf
@tenniswarehouse
2 жыл бұрын
@Kelly Latham, Apologies, we have had several issues with our CC over the years and have worked with KZitem to resolve the issue. Some of our older videos, or even videos before 2022 may not have CC, but we are doing our best to get them updated. Looks like I was able to push through captions on this one. Thanks for letting us know it wasn't working! We will do our best to have CC on all our videos moving forward! Michelle, TW
@sebflo4137
10 күн бұрын
Thanks for skipping literslly the most crucial part of the wrapping lol
@tenniswarehouse
10 күн бұрын
Here is a video we did to supplement that part, kzitem.info/news/bejne/wJl8rHyfrp5zapg&lc=UgzEtxIBtBNvDH12vUV4AaABAg. But I think you viewed and commented on that short video. 👍 Troy, TW
@TheKarolans
4 жыл бұрын
Why on earth would you reuse the old grip?
@tenniswarehouse
4 жыл бұрын
Not meaning like a worn out grip that has lost all of its tack, and cushion, but as in a slightly used one, or even the stock grip that you are replacing with a different grip. You could use it to put on another racquet, that has a really worn out grip, or in certain cases we take the brand new stock grip off the handle, to customize the weight, and then put the stock grip back on. Troy, TW
@TheKarolans
4 жыл бұрын
@@tenniswarehouse Ah I see, thanks for the insights! Nice video :)
@johnwilson5307
2 жыл бұрын
I hate grip bands, I think they are not needed. Yep just my personal opinion
@GalacticBlader
2 жыл бұрын
lmfao no one has ever used a needle nose plier heck you didn't even use one lmao
@tenniswarehouse
2 жыл бұрын
I actually do use them to help pull out the factory staple, it just wasn't shown in the video. You don't have to remove that staple, but some may notice it, especially when replacing with a thin grip. Troy, TW
@benparsons4979
3 жыл бұрын
it pains me how he removes a brand new grip
@tenniswarehouse
3 жыл бұрын
haha, it was for show, but we definitely recycled it and put it on one of our racquets that had a much more worn out grip. All you need is a bit of double-sided tape, and re-apply it. Troy, TW
Пікірлер: 157