Having to remove nearly the whole inside of the car for a heater core is insane and just stupidity on behalf of the car engineers who design these auto's now. They need there @$$'s kicked! 🥾 Great vid just the same! 👍
@lumberjackgarage193
Жыл бұрын
At first I hated the music.. but after wanting to destroy the vehicle with a hammer I began to appreciate the happy music. Thank you for the big help.
@chrischandler6320
Жыл бұрын
Great video! Just finished one. That dash is heavy!
@stevehowell4888
2 жыл бұрын
Wow! Excellent video! Great job man.
@olivialorraine1687
Жыл бұрын
Thank you so much for this video. Helped so much!
@samcripes3046
11 ай бұрын
Would rather you speak your language then listen to music. Followed my foreign languages and knew exactly what they were explaining. Good video.👍
@alandumandan7948
2 жыл бұрын
What a piece of work! Basta bisaya Hawud jud!
@PedroVargas-ek5ol
7 ай бұрын
Great video
@ejmegzcarvlog7226
7 ай бұрын
THANK YOU FOR THE COMMENT
@jeffreyroe3176
Жыл бұрын
I’m dealing with this now. The blend door broke and don’t have heat. These cars are engineered around the hvac system lol
@gerashancho8945
8 ай бұрын
Same exact reason I’m dealing with this … I was blown away at the design … just awful
@PoorMansPerspective
3 жыл бұрын
Grabe man ni pang malakasan!!
@ejmegzcarvlog7226
3 жыл бұрын
Wla sa plano, basta mka upload ok na. Hehehe
@PoorMansPerspective
3 жыл бұрын
@@ejmegzcarvlog7226 pareha rata haha 😂
@khonavqary2372
Жыл бұрын
Thank you. This makes sense. Why did you tie or taped the steering wheel, would that cause any issues if not tied?
@ejmegzcarvlog7226
Жыл бұрын
You must secure the steering wheel to not rotate for 360°or more. When you are removing. Then install it to correct position. Because if not. Many issues will occur. Like airbag lights message on, horn not working. Traction message on.
@khonavqary2372
Жыл бұрын
@@ejmegzcarvlog7226 thank you. I see you have drawn a line so it is installed exactly with that line. So after your about to remove you grabbed a pliers to cut or do something could you please tell me what it was? Also, this would be the same way if I want to replace temp valve door or blend door which got broken inside, right? Thanks for your assistance
@jorgegiron3413
10 күн бұрын
Hello Mr Ej I followed your video I remove bolt nut my dashboard don’t come out what I missing
@davetaylor2449
Жыл бұрын
You forgot to take the spare tire down so you could set the evaporator on
@pro0055
2 жыл бұрын
Jesus fucking Christ, my AC wasn't working properly and I just found out the evaporator is bad and needs to be replaced the mechanic told me the whole dashboard will have to be removed and I didn't believe him but looking at this video Jesus Christ I could imagine how much they're going to charge me in labor I'm almost tempted to just leave it that way...😔😤😩
@startrekkindelta
Жыл бұрын
I have the same issue with my Equinox. The part is only like $200 but the labor is going to be around $1,000+. 🫠
@mossnation7245
Жыл бұрын
@@startrekkindelta Jesus and mine just went out so I decided to go on KZitem to look it up and every video it’s a complete dash board removal shit man
@MeganBaer
Жыл бұрын
Me too man. I’m about to have to pay $1350 is cheapest I can find where i live… and I would just sell my car but it’s paid off and I can’t afford a new or used car or a car payment. Ugh.
@earnestmerida
Жыл бұрын
I just found out mine is bad. I live in Florida, so i think i will pay to get it done, or pump it up and trade it in lol
@jasonmckenna551
Жыл бұрын
What was hanging you up at 14:45 ? I’m at the same spot and something seems to be holding it up. Feels loose but still not coming all the way out.
@zombiehunter374
Жыл бұрын
Did you figure out what's holding it up?
@zombiehunter374
Жыл бұрын
For others. There's a long stud with a nut ABOVE the expansion valve, also the lever for the brake. Remove that nut and pop the arm off going into the rubber boot. A few connectors on mine on the right side, but slid right now after I got those. Took about 4 hours watching step by step and doing it.
@ksmith0110
11 ай бұрын
Should have mentioned the damn brake pedal! That’s what was holding me up for at least 1/2 hour.
@arturoacosta8301
9 ай бұрын
@@zombiehunter374 I got the evaporator replaced. After that procedure, the A/C gets cold sometimes. At one point, until the cooling fans started working it would sometimes turn on. I told the a/c tech about it, but he is a jerk and says nothing he did could be causing that. I have now replaced the high pressure valve on the compressor and still nothing. Anybody has any idea of maybe this guy doing something wrong. Maybe connecting something wrong. thank you.
@arturoacosta8301
9 ай бұрын
I got the evaporator replaced. After that procedure, the A/C gets cold sometimes. At one point, until the cooling fans started working it would sometimes turn on. I told the a/c tech about it, but he is a jerk and says nothing he did could be causing that. I have now replaced the high pressure valve on the compressor and still nothing. Anybody has any idea of maybe this guy doing something wrong. Maybe connecting something wrong. thank you.
@ejmegzcarvlog7226
9 ай бұрын
A/c tech can diagnose by using an a/c machine and looking for the refrigerant pressure for high and low side. In that way he can analyze the cause of your concern.
@jjalas03
2 ай бұрын
How to remove the driver seat?
@zombiehunter374
Жыл бұрын
1st day Bookmark 9:45 2nd day bookmark 16:10
@ksmith0110
11 ай бұрын
So I followed this video and was able to replace my blend door. No it’s all back together and it doesn’t start unless you press on the gas pedal. The problem is now that it’s started, I can’t press the gas and get any throttle response. And I have dozens of codes.
@ejmegzcarvlog7226
10 ай бұрын
thank you for the comment. Sir for sure you miss something or loose connection from connectors. double check all possible cause.
@dubbs357
10 ай бұрын
Check to make shure the frame ground under the dash is bolted down
@madmaxwell6
2 жыл бұрын
What is the torque spec for reinstalling the steering bolt at 10:55 ???
@ejmegzcarvlog7226
2 жыл бұрын
2012 up to 2017 model 34 N•m 2018 up to 2021 model 49 N•m
@seanrobert5900
Ай бұрын
Why no sound
@ejmegzcarvlog7226
Ай бұрын
@@seanrobert5900 Sorry for that. It's a copy right policy
@zianiabdelhamid12
6 ай бұрын
I am having the same issue and it looks that you are living in KSA, can I have your number to fix my car
@ejmegzcarvlog7226
6 ай бұрын
Thank you so much for the comment. But Im really sorry. Im no longer working in KSA.
@sigma20xx
Жыл бұрын
I often check KZitem to see if I can handle a job. I will not be doing this. I guess that's $2800 I'm gonna have to pay. Fuck...
@Gmoney2dope
Жыл бұрын
I was quoted $3300...fml
@waqarali7804
2 жыл бұрын
were good
@sentree9857
2 жыл бұрын
Having issues removing seats
@edwin.tech8862
Жыл бұрын
From what year ?
@stevenlukac6881
7 ай бұрын
i will never buy another chevy ever all that work to do a small job and it cost to much to do
@samanthamarie4350
Жыл бұрын
This is the easiest way?? No way!!! Literally dude took took apart any and everything possible.. i mean sure good for you man you got it like that but some of us aint trying to dismantle the entire front half of the car.. like dude cmon for as good as you are this is the eaasiest way you have found to help people who just want to replace it not spend 6 months to get under the glovebox.. WHY NOT make a video little more user friendly... GOOD JOB THOUGH .
@cwb420grow
8 ай бұрын
you obviously have no clue on what all has to be taken apart to remove that entire dash as an assembly. he cut a 10 hour job in half by doing it that way. the video is as user friendly as your going to get for a free how to on a 2500$ job. just because your not capable or smart enough to complete the job does not mean he aimlessly took things apart
@darkestgreenmewtwo
Жыл бұрын
my god this looks insufferable why did they design it like this
@davetaylor2449
Жыл бұрын
Supposedly when you do things the easiest way, it’s not supposed to look this hard, and you are suppose to be good at this and we see you stumped , so where does that leave us. You have to learn to use your words, and how to edit
Пікірлер: 52