Link to product now live at pimpmyev.com/products/audi-style-turn-signal-indicators-upgrade-kit-for-model-3-2017-2021?aff=5 Use code “TeslaDIY” to get a discount
@Thug9030
Жыл бұрын
Where did you purchase diffuser and how’s the lights going
@TeslaDIY
Жыл бұрын
@@Thug9030 got my diffuser as a gift from a friend who bought it from Hong Kong, it’s the same one everyone is selling, vorsteiner replica
@TeslaDIY
Жыл бұрын
@@Thug9030 the lights are still working 100% fine
@Thug9030
Жыл бұрын
@@TeslaDIY thank you and car looks good
@seanngo783
2 ай бұрын
I've watch a ton of these videos. I think you are the only person to fish it through with your bare hands!!! Mad respect ahaha.
@TeslaDIY
2 ай бұрын
im the only lazy one 🤣 but recently i did a rear diffuser for my brothers car on his Model Y, i ended up removing the bumper and it honestly wasnt too much work
@DannerBanks
Жыл бұрын
My 2018 Model 3 had adhesive behind the factory reflectors which were impossible to pry off, making your directions not useful for me. I ended up finding the video "Installation of knight rider turn signal indicators" from RPM Tesla and I drilled mine out per their instructions. Notwithstanding, glad I found this video cuz it gave me the confidence to pursue this project in the first place.
@alex-650
3 жыл бұрын
3:54 Solution: Cut 18 inches from the end of the top wire. Connect cut wire to bottom light connector. Now you have a wire long enough to feed from the bottom. Use wire hanger to help feed wire from bottom hole to top hole if necessary. Get a new wire connector to rejoin the cut pieces.
@TeslaDIY
3 жыл бұрын
Yeah if I ever install it again or reinstall it for some reason, I’ll do that, but for video demonstration, I thought I’d show how it’s done
@inelonwetrust9169
3 жыл бұрын
Great video. Thanks for breaking down the differences of operation and thorough install explanation.
@Firehuntah
3 жыл бұрын
Really cool! 🔥🔥 Hadn't even seen these before. Too bad it isn't working as it should but I think I'd actually prefer it this way. Especially with them staying on together with the tail lights. Not that I can use them anyway, illegal to replace the reflectors and add more lights over here. 🙁 But definitely nice for those that can use this.
@jamespeterson7100
3 жыл бұрын
I heard in some states you can get a ticket for the lights staying on all the time when you have your lights on at night because then they are considered fog lights and if there is no fog they have to remain off.
@3030hp
3 жыл бұрын
Interestingly enough, I love them always on w/ tails. It really gives it a very 'established' / mature look.
@mitchellbarnow1709
3 жыл бұрын
JOWUA products are fantastic! I love my phone charging pad with it’s integrated micro USB slot.
@onetricklux677
2 жыл бұрын
I don't have these lights yet but thanks for the detailed explanation on how to install 👍
@TeslaDIY
2 жыл бұрын
Thank you!
@ThatGuyBW
3 жыл бұрын
Thank you for biting the bullet and trying these out. These are just a **little** too cheesy for me, and I wouldn't have known if you didn't try them out and also discover that they were incorrectly spec'd for the US. If they 1) better match the OEM light color and 2) dial back the animation a bit I can see this as a nice little project! 🙌🏾👏🏾👏🏾👍🏾
@TeslaDIY
3 жыл бұрын
Haha yeah normally I’d say no especially I make fun of all WRXs with their 3rd brake rain lights. But these were sent to me for my review and I don’t mind the subtle uniqueness added. I feel like I want to use my signal every time a fellow model 3 is behind me now haha
@mmb1487
2 жыл бұрын
Nice video this guy is professional tells you what size socket to use ets Nice very good video
@TeslaDIY
2 жыл бұрын
Thank you!
@gust9464
3 жыл бұрын
Thx for sharing, those are very nice. I like the second option where they stay on looks much better. ⚡️
@TOMMYBOY6969
2 жыл бұрын
Thanks for this video, helped me a lot. I couldnt pull out the bumper at the top as much as you can, so instead, i just cut the long wire, pushed it up from the bottom hole, and it just popped right up. Then i just had to re solder the 4 wires, it turned out great. Mine didnt have the blinking brake lights. When i stepped on the brakes, it just turn on solid. I think it all depends which vender, and which Tesla model year you have.
@TeslaDIY
2 жыл бұрын
Awesome Tommy, I am glad it worked out for you, especially with everything functioning.
@TOMMYBOY6969
2 жыл бұрын
@@TeslaDIY Correction, i just found out that everything works well only when driving in the day time, the brake lights turn on and off solid. But when i drive at night with all the driving lights on, when i brake, the left lights blinks 3 times then solid, but the right light turns on solid without blinking. :O
@TeslaDIY
2 жыл бұрын
@@TOMMYBOY6969 oh....thats weird, is it a Model 3 or Y? sounds like a Y
@ModestMuse3
2 жыл бұрын
@@TOMMYBOY6969 there are 4 wires to the left reflector. cut the red one and it will function the same as the right (properly)
@sohailrahel2590
Жыл бұрын
@@ModestMuse3 I have the same problem so this worked to stop the left reflector from rapidly blinking before going solid at night?
@winstonreed1437
Жыл бұрын
What spoiler are you running? Looks awesome on your car. 🔥🔥🔥
@TeslaDIY
Жыл бұрын
Thanks, both front and rear spoiler on my Model 3 are from MaierEV, discount code "save7tesladiy" for 7% off ☺
@JordaNguyeN
3 жыл бұрын
It’s PK!
@TeslaDIY
3 жыл бұрын
Whatssssup
@KyleMckinleyy
3 жыл бұрын
i have to know what that roof rack/box system is called i think that looks so cool
@TeslaDIY
3 жыл бұрын
Hello Kyle, those boxes are storage box, some calls it cargo box, some calls it skibox. Most use it to store snowboard, skis...etc Here on my Instagram I made a pinned story to talk all about my skibox and rack setup instagram.com/s/aGlnaGxpZ2h0OjE3OTAwNDI2MTc5NzI0OTky?story_media_id=2478174636586373956&
@KyleMckinleyy
3 жыл бұрын
@@TeslaDIY thank you so much i’ve been looking all over the place and i can’t find anything on these
@TeslaDIY
3 жыл бұрын
@@KyleMckinleyy same here, before I did this, I looked everywhere and asked some people, found nothing, that’s why I created these stories to share what I did to help out others
@akhomchinnarath2578
Жыл бұрын
Do you think it's the same process on model y.
@TeslaDIY
Жыл бұрын
i have a separate video for Model Y on the same product
@gnawshus007
2 жыл бұрын
Perry! I did it! Well, I tried then I needed to ask my teen son to squeeze his slimmer arm in to the tight tight area. Lol. Yea I owe him. The right side tho, wow! Anyway, I do like the more direct route you showed but dang! Hahaha! Overall it was worth it. My arms is still sore and scraped from trying. I am bummed a bit that the brake light doesn't flash before turning solid. Do the later models support both? The Y? Always appreciative of all your DIY vids and knowledge share!
@TeslaDIY
2 жыл бұрын
Good job Ray! As far as I know, all usa model 3 won’t get the hyper blink/solid brake effect, not unless you unplug the turn signal wire anyways (I forgot what color it was) or unless you run a separate power wire from the front fender side camera turn signal, all the way to the back to connect to the reflector light. Model Y works as designed, it does the sequential turn signal and rain light brake effect as it should
@gnawshus007
2 жыл бұрын
@@TeslaDIY Thanks Perry! It be safer to just buy a Y. Oh wait need more funds! Lol! Thanks for the tip!
@gnawshus007
2 жыл бұрын
@@TeslaDIY Thanks Perry! It be safer to just buy a Y. Oh wait need more funds! Lol! Thanks for the tip!
@Delc0
3 жыл бұрын
Pretty sick...do you think there will be a updated version to integrate the brake lights to work how they intended in the future?
@TeslaDIY
3 жыл бұрын
I hear that they are working on it but I can’t say for sure. China seems to be pretty creative when it comes to coming up with new parts for our cars, however they don’t seem to know there would be issue with US Spec cars, since they have no access, now that they know, they might be able to figure out a way
@Delc0
3 жыл бұрын
@@TeslaDIY ok. Thanks for the video. Would still be a nice overall feature even without the break lights working properly....the signal indicators alone are a great addition.
@acuevas87
3 жыл бұрын
just in case that im not trippin, when i hit the brakes, the bottom lights just blink or aka stutter, but the turns still work though
@TeslaDIY
3 жыл бұрын
Sounds like it’s fully functional for you, what spec is your car?
@acuevas87
3 жыл бұрын
@@TeslaDIY crap my message did not make any sense lol, well i meant to say that its the same as yours lol, im debating if i want the turn signal or extra brake lights. 2018 Mod3 LR RWD.
@catinthehat5140
2 жыл бұрын
How did you get the tail lights to seat flush when the new wire harmess is coming through the same hole as the tail lights fixed connector?
@TeslaDIY
2 жыл бұрын
There’s enough room, the oem socket to the tail light is not seal with the pass thru hole
@ronm7781
3 жыл бұрын
seriously how did you get those reflectors out without removing the bumper - you did not just slide a plastic card under them and get them to pop off.
@TeslaDIY
3 жыл бұрын
Haha I did, I carefully work from the edge and get it lift enough to get a finger behind carefully pull
@ronm7781
3 жыл бұрын
@@TeslaDIY thanks -- I am struggling to get the OEM ones off and refuse to drill into my 60K car - thats the other way to get them off....
@TeslaDIY
3 жыл бұрын
@@ronm7781 just get a good grip and pull onto it, or grab a flat head, with a towel to protect the bumper and pry, do it carefully though, if you feel too much flex on the reflector, try again with better grip, tuck whatever tool you have in as far as you can and pry again
@ronm7781
3 жыл бұрын
@@TeslaDIY was able to get them out and only broke 1 clip from the original reflectors - in case I want to put them back. Started on the outside edges and used two auto interior trim removal tools *wedge and crowbar looking plastic one. Was then able to get fingers underneath and they popped out. Also - you can drill the small center hole (its plastic) to make it bigger. and you should probably use electrical tape on the connections before you reinsert the wires into the vehicle. Thanks for this video
@theevstudio7658
3 жыл бұрын
What spoiler is that?
@TeslaDIY
3 жыл бұрын
MaierEv
@jayteezy100
3 жыл бұрын
I think this would look good with the fishbone taillights. Will you be getting them?
@TeslaDIY
3 жыл бұрын
I have seen those, but nah, i won't be getting those, a bit chessy/ricey, even these lights are a bit chessy but im ok to leave them on, its subtle enough
@jamespeterson7100
3 жыл бұрын
Do you have a link or KZitem channel where I can see these lights functioning properly when the brakes are applied? I tried to access that Chinese youtube channel but had no luck. Thanks.
@TeslaDIY
3 жыл бұрын
Take a look at @9:15 and @14:45 you can see how it blinks fast a few times and stays on
@jamespeterson7100
3 жыл бұрын
@@TeslaDIY So when you disconnect the turn signal wires and hit the brake the light flashed first and then stays red. But does that happen simultaneously with the model 3 brake lights or does it happen before? Thanks.
@TeslaDIY
3 жыл бұрын
@@jamespeterson7100 Hello James, so during the demonstration of me unplugging the "blue and yellow" turn signal wire, i had my brake pressed (used something to prop onto the pedal). Therefore as soon as i unplugged the turn signal, brake light function activated. Basically, when brake light feature is working, it should blink a few times, and stays on as long as brake pedal is pressed
@jamespeterson7100
3 жыл бұрын
@@TeslaDIY Oh ok. I think I like tHe brake pedal better than the directionals so I will keep the blue and yellow directional lights unplugged. Thanks. 👍
@TeslaDIY
3 жыл бұрын
@@jamespeterson7100 I actually agree, especially since it works well on its own without affecting anything else, running it as turn signal makes braking silly since when braking it’ll light up once as turn signal
@mikenguyen5209
3 жыл бұрын
What happens if you plug in the turn signal but leave the brake plug unplugged? Will it stay lit when your low beams are on? Or will it only work when you use the turn signal? I think I would prefer not to have it work when I’m braking due to regen brake activating so often that it’ll annoy the drivers behind me.
@TeslaDIY
3 жыл бұрын
Nope, because the oem tail light shares the same light for turn and brake, so power is feeding the brake light, turn signal only trigger it to blink. If no power to “brake”, the light won’t come on at all. If you don’t want the light to blink when you brake, simply plug in both sets of wire, then these reflectors will work as turn signal only
@mikenguyen5209
3 жыл бұрын
@@TeslaDIY thank you, I guess I’ll plug both wires in and run it the same way you did then. Hope it arrives soon, I also have the Audi style tail lights on order from hansshow. I know a lot of people aren’t fans on it but I think it’ll look together with these.
@AKTesla
2 жыл бұрын
I'm not pulling my bumper back like that.
@dcarroll5383
3 жыл бұрын
So I installed these and they actually work as brake lights. Issue is only the driver side light blinks before it goes solid. The passenger side functions normally. Any suggestions?
@dcarroll5383
3 жыл бұрын
Also, I forgot to mention it works perfectly when the headlight are off. It only blinks when the headlights are on. So strange.
@kylerthomas3369
2 жыл бұрын
same. did you ever fix it?
@JGallis
2 жыл бұрын
Doing the turn signal is really really annoying no lie I was like wth
@quernechristian1111
3 жыл бұрын
😍😍😍😍😍🇫🇷🇫🇷🇫🇷
@svfun5263
3 жыл бұрын
Dude stop ruining that fine car
@TeslaDIY
3 жыл бұрын
Ok let me take everything off right now, brb
@hhova29
3 жыл бұрын
Nice video. If I may ask you which Tesla do you favor of the two that you own?
@TeslaDIY
3 жыл бұрын
Thanks! I definitely like my Model 3 more, I try driving my Model 3 over the Y whenever possible, took my 3 to fishing, biking ride, road trip but sometimes the Y is a better choice because of parking situation reason, I don’t like leaving my Model 3 out in the public where I can’t see it haha
@suba73160
2 жыл бұрын
Where did you get that big hero 6 headrest on your Tesla y ?
@TeslaDIY
2 жыл бұрын
I made it, just drew it up and had it vinyl plotted, I have a vinyl cutter at home
@mrteausaable
3 жыл бұрын
I like it but do they make one for model X 2018 ?
@TeslaDIY
3 жыл бұрын
I think they are working on something for S and X as well
@discocrocodile6310
3 жыл бұрын
Unrelated, but what % is the tint on the front two windows? And are you paranoid of getting a stronger tint or just personal preference?
@TeslaDIY
3 жыл бұрын
Hello, I actually never tint my cars but recently did had my Model 3 tinted, however it was a rather light tint, just enough for it to look better on photo. I never mind the heat or privacy. I think it is currently at 35%
@discocrocodile6310
3 жыл бұрын
@@TeslaDIY Ah okay as thinking a 20% tint on all the doors but scared that I'll get pulled over for the front door windows. Was wondering if that was your reason too haha.
@TeslaDIY
3 жыл бұрын
@@discocrocodile6310 hmm, not really, i just went with 35% as the tinting person suggested. In person its a big difference as far as how much darker and how little of the cabin you can see from the outside. I am pretty happy with it
@jaspal2370
2 жыл бұрын
at night do they stay on?
@TeslaDIY
2 жыл бұрын
Yes it stays on even during the day
@th3ndktn
2 жыл бұрын
will this void any warranty of the car ?
@anilsagar7913
3 жыл бұрын
Model 3 2020 or 2021 ? Heard that 2021 - We need to drill holes for inserting the wire. Is that true ?
@catinthehat5140
2 жыл бұрын
I did a 2021 and didn't drill a hole. The installation was similar to his. I did have a problem seating the tail lights because the harness goes through the same hole as the tail light connector
@usasupra23
3 жыл бұрын
Nice job! So, if I want just parking light and the hyper flash brake light I just have to leave the turn signal wire disconnected? I wonder if I can use a diode on these wires to get it to work for everything? A pit of diodes could block feedback on the wire and it might work and only costs pennys to try. Thoughts?
@TeslaDIY
3 жыл бұрын
Thank you! Yes just unplug the blue/yellow wire, and youll have a fully functional hyper flash brake light. Some suggested the diode method, I’ll look into that.
@usasupra23
3 жыл бұрын
@@TeslaDIY best place to buy this kit and is there a sale or code to use?
@TeslaDIY
3 жыл бұрын
I recommend buying from PimpMyEv that’s where I got mine, the only other place that sells it currently is rpm tesla. I have promo code for PimpMyEv for 15% “TeslaDIY”
@usasupra23
3 жыл бұрын
@@TeslaDIY thanks, Mark at RPM has good product but he sux and is slow. Basically a slow drop shipper
@TeslaDIY
3 жыл бұрын
@@usasupra23 yeah I don’t buy from him nor do I support his business for personal reason
Пікірлер: 112