Sorry about the audio glitch towards the end! I’m still learning these new mics lol
@BryerTheGreater1
2 жыл бұрын
Sup
@djdjdjdjdjdj4038
2 жыл бұрын
it’s fine
@northeastpyro8796
2 жыл бұрын
Cody do you do orders to the United kingdom
@donscrilla7171
2 жыл бұрын
@@northeastpyro8796 I bet if the price is right he'll send an order to the moon😄
@northeastpyro8796
2 жыл бұрын
@@donscrilla7171 Haha for one of those milf hoodies would be awesome Haha. Hey dude thanks for kind reply hope your well.:)
@jft1911
2 жыл бұрын
You could just drive in a screw part way into the wood to hold the tubes in the slide rack. It could be easily unscrewed to remove the tubes if needed.
@subaquaticpyro8234
2 жыл бұрын
1/2 + is long enough, maybe up to 1"
@72869mark
2 жыл бұрын
No matter what video you make you put the Cody B twist on it , and mad jealousy you get to play with pyro daily and here in NJ I’m limited to what I can do and show 🤫💥 Big fan thank you for the great content
@ipyro581
2 жыл бұрын
Can you demo Donut shells by winda?
@djdjdjdjdjdj4038
2 жыл бұрын
I ❤ that new intro!
@djdjdjdjdjdj4038
2 жыл бұрын
thank you for always hearting my comment Cody, glad to see you reading all the comments!
@SmokingDabs
2 жыл бұрын
Can't wait till it gets nice and stays nice
@PyroLooney01
2 жыл бұрын
You should try ultimate power from Winda
@samfrench1053
2 жыл бұрын
Love it I would try patriot shells by black cat they are huge
@pdubzpyro
2 жыл бұрын
Getting my fix visually at least while I build these racks.. also heard shipping will be open for fireworks in Ohio thanks to hb 172! Let’s hope they can bring it right to my door next year.
@pyrodave6407
2 жыл бұрын
Check wfboom they ship to your door plus they are in Ohio can only buy cases wholesale online. It's where i get 90% of mine but I just drive 15 minute from pa. May 12th or 15th Ohio gets a 12% tax on fireworks
@SooMajor
2 ай бұрын
Would've liked to see you shoot shells out of the ones with no base
@michaellittlejohns7968
2 жыл бұрын
R u going to do a video of 7inch canister shells soon
@CodyBPyrotechnics
2 жыл бұрын
This summer yes
@dudetapedtoafridge3073
2 жыл бұрын
O0oeh new intro. Fancy
@subaquaticpyro8234
2 жыл бұрын
Yep, posted
@ronjeremy4831
2 жыл бұрын
New merch absolutely gas🔥
@seansappok1141
Ай бұрын
Man I need to find those shooter shells, those are nice
@jjm4131
2 жыл бұрын
Love the merch
@jofferyclayborn9511
2 жыл бұрын
Whoop whoop 🙌
@nateschroeder109
2 жыл бұрын
Love the merch but it's usually 90 to 100 plus degrees here in Kansas during the 4th, so a sweatshirt is a no go for me! Keep up the great videos Cody!
@satinderjit4
2 жыл бұрын
Loved that you not only built them but also tested them.
@559ReyRey
2 жыл бұрын
Cody, u should definitely make a video on outlaw fireworks in pahrump NAVADA!🤙🏼
@subaquaticpyro8234
2 жыл бұрын
He has!
@justinsarge6543
2 жыл бұрын
Been watching your vids for what seems like years now and I wasn’t subscribed wow now I am 😃
@bucaroo100
2 жыл бұрын
Go on a 3d printer site and make a morter tube model and take it to the 3d printer place and see if a 3d printed tube will work with a shell
@KentAndrewLang1967
2 жыл бұрын
That’s like $500 worth of wood right there! 😂
@yobtnirp3D
2 жыл бұрын
Wood prices do be crazy these days
@user-xe5eq9br1c
Жыл бұрын
Really? Why is it so expensive
@owencraig6532
Жыл бұрын
@@braddougherty3401 🤣🤣🤣🤣🤣🤣
@eric81872
2 жыл бұрын
thank you for the video brother! ☺♥
@lloydbellis7360
2 жыл бұрын
Racks worked well, nice shells, thank you
@xxtenations3091
2 жыл бұрын
Omg cool 😎 I love it codybpyroyhics
@PyroHockey729
2 жыл бұрын
I have this 6inch double break / single break canister by mega banger there called bad enough canister if you ever see them can you demo them and can I shoot 6inch canister shell out of my 12 inch hdpe dr11 tubes
@tylerseward2980
2 жыл бұрын
Have you shot any off yet? I believe it was 12 double breaks and 12 single breaks. The double breaks were amazing but the single break shells were some of the biggest breaks I've ever seen. I have a video on YT of it under SewardPyrotechnics
@ebaygaming2087
2 жыл бұрын
These Tubes dont Wiggle Wiggle they Fold
@subaquaticpyro8234
2 жыл бұрын
ND's lovely landscaping
@ryannewyspyrotechnics2421
2 жыл бұрын
Well that’s my fix 4the day love it awesome content keep em coming Cody also love that slide in rack with the hdpe tubes new idea 4 me now love it thanks always appreciate it
@TruongMupdup
2 жыл бұрын
You should try the biggest firecrackers in your country, I see that you burn all kinds of ordinary firecrackers
@Cole-Toone
2 жыл бұрын
I feel bad for anyone wearing a sweatshirt on the 4th lol
@chefscorner7063
2 жыл бұрын
For the low break Shell. Didn't one of them not go down all the way in the tube (but not by much) when you were fusing that rack? You said "when the fuse lights it'll drop down". Maybe that's the culprit??
@smeep1735
2 жыл бұрын
These were awesome
@jeffkowal4723
2 жыл бұрын
Great shells, thanks for sharing!
@subaquaticpyro8234
2 жыл бұрын
Nice willows shells
@riverrat073
2 жыл бұрын
Great video! I like how you said turn up the volume and and advertise starts. Lol
@raidenmk4473
2 жыл бұрын
You should do cakes and shells like CharlesPyro Fireworks does on his channel
@jsplinc2000
2 жыл бұрын
lovin' the new merch
@Potisha440
2 жыл бұрын
Really good content keep it up!
@PYRO-ON
2 жыл бұрын
Good stuff as always!
@georgesmith8113
2 жыл бұрын
Great video! 👍👊😎
@southcentralpyro4777
2 жыл бұрын
Demo some bungas
@BoltyyYT
2 жыл бұрын
Hey
@donscrilla7171
2 жыл бұрын
You make it extremely hard to wait until July for this stuff😫
@PyroHockey729
2 жыл бұрын
I had pyro itch because him on the may 4th be with you me and brother did a fountain lol
@elliottdeiters4119
2 жыл бұрын
Awesome video man 👌💯👍
@santiagogarcia8649
2 жыл бұрын
this is what we needed codyyyyy ay man you think you can demo reapers doom magnum shells they go for cheap for a 12 kit🙌
@davidkasparian4089
2 жыл бұрын
May the 4th be with you Cody🔥💣💥💙
@Kbetz4393
2 жыл бұрын
How would you feel if I changed my KZitem channel to KodyBPyrotechnics lol. It's AllBetzerOff right now and is a mixture of live streams and firework demos. Thinking about making a separate channel for just demos.
@BryerTheGreater1
2 жыл бұрын
Sup
@russelllong2974
2 жыл бұрын
The bombas are color coded by effect! Love the new merch but I don’t think I can wear a hoodie in July when it’s 115• outside
@ipyro581
2 жыл бұрын
The shells part of my stash this year Nishiki willow by raccoon Death shells Neon diablos And donut shells by winda Do you think this will make a half decent show?
@donscrilla7171
2 жыл бұрын
depends on what you consider a decent show and how you put it together but id say 5 kits is plenty. This year I only plan on filling 2 24s racks and the rest of the show will be cakes. I think I have around 40 cakes and the Finale will be happy face, bite of death and then 2x demonic corona banger version with dday
@CodyBPyrotechnics
2 жыл бұрын
Absolutely
@TruongMupdup
2 жыл бұрын
You should try the biggest firecrackers in your country, I see that you burn all kinds of ordinary firecrackers 😉
@L3tha1ity
2 жыл бұрын
Hahaha Cody doesn’t even know his own upload schedule!!!! P.S. he told me to say it.
@Quartzvr
2 жыл бұрын
Can you put the new merch in the desc? I can’t find it on the website
@CodyBPyrotechnics
2 жыл бұрын
Everything should be on there!
@Quartzvr
2 жыл бұрын
@@CodyBPyrotechnics I have sight problems (eye growth cough cough) so that might be why
@antonioaguirre7975
2 жыл бұрын
You think you could make more budget videos now that the 4th is coming closer?
@BOUSIDIABLES
2 жыл бұрын
👌👌👌💪💪💪
@kennyterrell-sl8lx
Ай бұрын
what kind or pipe are those and where can i get them
@garrettstohs7496
2 жыл бұрын
What happens when you cast the fireworks in concrete?
@subaquaticpyro8234
2 жыл бұрын
Nothing
@SawBlood45
2 жыл бұрын
I am afraid to see how much Excaliburs are going to cost this 4th of july
@greasyrails2571
2 жыл бұрын
i got 24 for 100 $ + 8 dollar tax these are 4 inchers
@SawBlood45
2 жыл бұрын
@@greasyrails2571 even for the normal ones that sounds better than what I've seen. new years 2020 the Excalibur platinums we're $110 in my area since then theyve been $150. Now the $50-60 cakes are around $95. It's getting too expensive for my liking unfortunately.
@BubaLabinski223
2 жыл бұрын
That’s cool I love your apparel especially your T-shirts I just want to know because there’s no sizing On your site I wonder if you have like 6X Also on the slide rack at the end there you could drill a hole and put a dowel rod in just to hold it in tight
@Pooperscooper639
2 жыл бұрын
Do you replace the tubes after using the 6 times so it doesn’t explode?
@CodyBPyrotechnics
2 жыл бұрын
Nope, I’ve been re-using tubes for years. Even some from 2015 lol
@subaquaticpyro8234
2 жыл бұрын
@@CodyBPyrotechnics My excals tube got pretty crust inside. I had to fill them with water, soak, drain and then rinse them. Probably from 2015 version.
@rczerwonka
2 жыл бұрын
You need to fix the sound in post!!! :)
@subaquaticpyro8234
2 жыл бұрын
UH, the passfire is going the OTHER direction
@subaquaticpyro8234
2 жыл бұрын
12" are actually 10 1/2" with the plug.
@cesaryamilcanals4832
2 жыл бұрын
Siiiii😻😝✌🏻🙏🏻🌎🇵🇷
@jzxsantos
2 жыл бұрын
Hey, not sure if you’d be interested in metal racks?
Пікірлер: 100