Like the video. To protect the thread on the injector, try adding a nut of suitable size onto it.
@retro.restorations
2 жыл бұрын
Good shout! 🙂👍
@javiernunez5880
2 жыл бұрын
Awesome, you are helping a lot of us!!
@retro.restorations
2 жыл бұрын
🙂👍
@warbirdflyer7276
2 жыл бұрын
Brilliant. Thanks for the video.
@retro.restorations
2 жыл бұрын
Your welcome! Thanks for watching 🙂👍
@warbirdflyer7276
2 жыл бұрын
Mate, I learned the hard way. Attempting to clean the nozzle tip with a wire wheel is problematic. The wire wheel may deform the nozzle pin. Creating a poor spray pattern. Gentle as she goes!
@retro.restorations
2 жыл бұрын
My wire wheel is soft you can almost stop it with your hand. if it breaks to easily then it's ready to be replaced anyway its hardened steel so is tough but wears over time. 🙂👍
@robertpoole5305
2 жыл бұрын
Good video, on the pop tester do yo close the black knob or have it open. Thanks
@retro.restorations
2 жыл бұрын
Thanks! On mine it's backed off and I screw it in to hold the pressure in the injectors to see if they leak. 🙂👍
Пікірлер: 10