Great video guys. I have been an Orthotic Technician for 20 years now and this is the first time I have seen how someone else or another company manufacturers the stuff I make. Makes me feel part of a bigger group rather than just the small company I work for.
@davescarpetti
6 жыл бұрын
Fantastic video too, you guys are serious craftsmen!
@shivorthotics3006
Жыл бұрын
Nice work man
@SophatSuong
11 жыл бұрын
You are so awesome!
@AdvancedOrthopedic
11 жыл бұрын
We modify enough room into the model to accommodate adding pads near the end of the process. The pads that we use are very soft and low durometer, the hot plastic under vacuum would permanently compress this type of padding too much to still be effective.
@AdvancedOrthopedic
11 жыл бұрын
It's zonolite, aka vermiculite. It makes the models easier to rectify, plaster build-ups stick better. It helps and it's cheap.
@AdvancedOrthopedic
10 жыл бұрын
The material we add to plaster is zonolite, sometimes called vermiculite
@20MDM
11 жыл бұрын
This might be a dumb question, but why did you choose to put the pads in the malleoli pads at the end and not before the draping when you could have skived and put the pads underneath the nylon stockinette (baby powder could then be used as a separator during the vacuuming)?
@ElyseHorvath
11 жыл бұрын
Can you do a video of making a hinged afo
@20MDM
11 жыл бұрын
More videos, please!
@debonair3625
3 жыл бұрын
At 7:17 which hand machine is that you are using to cut AFO ???
@davescarpetti
6 жыл бұрын
If I had no insurance, how much would these be? I've been through so many braces that just aren't good.
@yibeltalemiheretu5543
3 жыл бұрын
Hello, Thank you for demonstrating!! I live in Washington DC and I have a brother who live in Ethiopia( Africa).He had a car accident and he didn't walk for the last 12 years and I am trying to buy for him KAFO with out prescription but I couldn't find where and how I buy it. can you please please please help me? Thanks in advance!
@fernandoflorez632
4 жыл бұрын
Buenos días cual es la medida exacta donde deben ir los maniquíes de la articulación para AFO teniendo encuentra que un maléolo es mas alto que el interno?
@LilyNyhane
11 жыл бұрын
The Thing That You add With The Plaster That Make His Colour Grey n It's Just A Dye ????
@complex2034
9 жыл бұрын
we work the exact same way with the exact same tools here in montreal, canada. Great work guys ! your anvil is nicer tho ;-) lol
@debonair3625
3 жыл бұрын
At 7:17 which hand machine is used to cut AFO plastic?
@AdvancedOrthopedic
11 жыл бұрын
We will at some point. Just subscribe to our channel to stay up to date with our releases.
@anonimo8291
Жыл бұрын
En colombia hacen este trabajo
@russrusselson2136
7 жыл бұрын
at 7:38 I am looking at some sweet buffing machines. Do you think I can use a 1/2 hp motor to serve my needs?
@AdvancedOrthopedic
7 жыл бұрын
My router is 1/2 hp and works well.
@russrusselson2136
7 жыл бұрын
Thank you!
@russrusselson2136
7 жыл бұрын
I hope I am not bothering you but would this work instead of buying a router? www.arbemachine.com/View/Two-Speed-Polishing-Motor
@russrusselson2136
7 жыл бұрын
and I was going to attach this to it www.amazon.com/gp/product/B0002IXQ4W/ref=s9_acsd_hps_bw_c_x_1_w
@abitkasmal7932
4 жыл бұрын
Is this AFO rigid design?
@10mrturbo
9 жыл бұрын
A full footplate will keep the orthosis from cutting into the sulcus of the foot and aid in toe pick up.
@AdvancedOrthopedic
9 жыл бұрын
Dean Hansen Perhaps in some designs, but it hasn't been an issue. We use full length padded footplates, something no one else that I know of does. It works very well for us.
@YumClickCafe
9 жыл бұрын
Why did you choose to use a shorter footplate, rather than a full foot that other ground reaction designs use?
@AdvancedOrthopedic
9 жыл бұрын
Erin Tatum A full footplate adds no benefit, it just makes the shoe tighter. There is no added rigidity with a polypro footplate that is flat. Short answer, easier to fit in the shoe.
@YumClickCafe
9 жыл бұрын
Advanced Orthopedic Designs Thank you for the fast reply
@samuelarvizu3820
9 жыл бұрын
very nice process thanks
@rafalkhalid5019
5 жыл бұрын
تحفةةةة
@minakhadka4539
6 жыл бұрын
can u plz explain the trimline being made
@AdvancedOrthopedic
6 жыл бұрын
Proximally the trimline extends to the tibial tubercle. Medially and laterally they extend beyond the apices of the maleoli.
@minakhadka4539
6 жыл бұрын
Advanced Orthopedic Designs thanks
@nozyspy4967
6 жыл бұрын
What is the vermiculite for?
@bagonth
6 жыл бұрын
It makes the plaster less dense so it's lighter to work with.
@debonair3625
3 жыл бұрын
At 6.42 which cutter is that?
@brandonpierce5961
Жыл бұрын
its called a 5 in 1 leather cutter I believe. Or at least that will get you closer in the right direction!
@bagonth
6 жыл бұрын
Is there no sound with this video?
@AdvancedOrthopedic
6 жыл бұрын
I guess not. My techs made the video.
@sunshineabigail6387
6 жыл бұрын
Rry
@waltertaggart2020
6 жыл бұрын
Pat CC iiiii
@waltertaggart2020
6 жыл бұрын
Advanced Orthopedic Designs Aaaaaaa
@saifulsyazwanmohffadzil1650
8 жыл бұрын
What is the function of zonolite?
@AdvancedOrthopedic
8 жыл бұрын
+saiful syazwan mohf fadzil Zololite is a light weight filler. It makes the plaster more absorbant and I think it makes plaster buildups stick better.
@saifulsyazwanmohffadzil1650
8 жыл бұрын
Thank you for the fast reply. great information
@sisaymondavah4531
3 жыл бұрын
Bowl leg ?
@russrusselson2136
7 жыл бұрын
Does anyone know the tool he is using at 7:20?
@AdvancedOrthopedic
7 жыл бұрын
It is a Landis 5 in 1 trimmer. Kevin
@russrusselson2136
7 жыл бұрын
Thank you so much!
@russrusselson2136
7 жыл бұрын
That is an incredible tool btw!
@AdvancedOrthopedic
7 жыл бұрын
It is a Landis 5 in 1 trimmer, most commonly used in shoe repair.
@syedaejazali346
6 жыл бұрын
Advanced Orthopedic Designs hi sir iam from India sir i want to do training orthotics and prosthetics please help me sir
@Nova-ne1il
4 жыл бұрын
Two people to do transfer paper. !!!!!!!!! Unheard of .hi I make orthopedic stuff not going to say as I'm a supervisor..man that would be great. I have to use cardboard rolls silacon wrap it tight and apply it with one hand and pull out the wrinkles with the other on poly pro . I also have to do p zot by myself you need a new employee??? jk good work Bud
@ZiellosGott
5 жыл бұрын
hi, how money is that
@kevinmatthews683
5 жыл бұрын
I don't know what you are asking.
@hollycutts5032
2 жыл бұрын
Holly
@fdoortiz63
9 жыл бұрын
hola
@AdvancedOrthopedic
9 жыл бұрын
Hola Adrian. How are things in Mexico? Have you made a Turbo yet?
Пікірлер: 66