Thank you for sharing a wide range of texturing and making it so anyone can understand it.
@MikePeaceWoodturning
3 жыл бұрын
You are so welcome!
@glencrandall7051
3 жыл бұрын
An overwhelming subject. As you said, The possibilities are endless. Thank you for sharing. Have a great day and stay safe.
@MikePeaceWoodturning
3 жыл бұрын
Thanks, you too, Glen!
@davidmorgan7522
3 жыл бұрын
Really enjoy playing with the texturing tools on a turning. It can be small and subtle or large and dramatic. Thanks for sharing your knowledge with us Mike. Take care, Dave
@MikePeaceWoodturning
3 жыл бұрын
My pleasure!
@johnjohnsonjr5324
3 жыл бұрын
Mike you are something else. You have made a video on every thing
@MikePeaceWoodturning
3 жыл бұрын
Let's hope not or I would be out of ideas for future vides!
@randysmith4344
5 ай бұрын
Great video Mike. I looked for your blog in hopes of finding your sample board and the document but looks like your blog is gone. If you sell that texturing document, I'd like to get one. Thanks for the great lessons in texturing.
@MikePeaceWoodturning
5 ай бұрын
Not sure my sample board would be useful to anyone but me. I never posted it on my website. Sorry for the confusion. I do have lots of videos on texturing.
@LewisKauffman
3 жыл бұрын
Thanks, Mike!
@MikePeaceWoodturning
3 жыл бұрын
You bet!
@davejohnson9495
3 жыл бұрын
Another great video. I have a few texturing tools and it's great to add something special to a piece. My problem is knowing when to stop as sometimes I have done too much. Still you can always cut a bit off and start again 😝
@MikePeaceWoodturning
3 жыл бұрын
Great point! Sometimes more is less.
@jerrystark6766
3 жыл бұрын
A very interesting and informative video. Thank you!
@MikePeaceWoodturning
3 жыл бұрын
Our pleasure!
@RickTurnsWoodturning
3 жыл бұрын
Good video, Mike!
@MikePeaceWoodturning
3 жыл бұрын
Glad you think so!
@devans83
3 жыл бұрын
Thank you, sir! Appreciate your videos.
@MikePeaceWoodturning
3 жыл бұрын
So nice of you
@kenharper616
3 жыл бұрын
Thank you for sharing.
@MikePeaceWoodturning
3 жыл бұрын
My pleasure!
@jackthompson8019
3 жыл бұрын
Great video Mike. One thing you did not mention is a die grinder from Harbour Freight. These work great. I like the ball best.
@MikePeaceWoodturning
3 жыл бұрын
All I see on the HF site are 1/4". How do you accomodate the 1/8" burrs?
@jackthompson8019
3 жыл бұрын
@@MikePeaceWoodturning I use the 1/4 inch burs in the die grinder. I do not plug it into an air source, just let the wood spin it.
@DougMilleratWoodSpunRound
3 жыл бұрын
Thank you, Mike n
@MikePeaceWoodturning
3 жыл бұрын
Glad you enjoyed it!
@tomcoker9882
3 жыл бұрын
Thanks Mike for this and the expanded videos on texturing. Very helpful. Do you by chance have a handout available that shows your storyboard examples with the associated production notes? It would be a fantastic acceleration tool to aid in making one for myself. I have had a little success in making one off designs, but even with notes I’m having trouble duplicating them from one project to another. Even using wood from the same log hasn’t been to successful, and using different woods - forget it, all bets are off. Any help would be appreciated. Thanks again for the videos. Stay safe and well so you can keep them coming. Cheers, Tom
@MikePeaceWoodturning
3 жыл бұрын
Send me an email and I will send you something.
@DKWalser
3 жыл бұрын
I'm speechless! (In a good way.)
@billmiller5924
3 жыл бұрын
Mike -Great informative video as usual - I always enjoy watching & learning from your videos
Пікірлер: 32