If you constantly drive on the freeway the th400 sucks especially if your hitting 75-80mph......I swapped mine to a 4L80e with a trans controller and I will never go back to a 3 speed but to each his own. Great vid bro🤟😎👍
@bricedentel4102
Жыл бұрын
Depends the 3 speed Is good for street,strip, if your doing just strip get a 2 speed, if your doing just street ye I have the 4l60e for towing and street
@aaronknudsen296
Жыл бұрын
What trans controller did u use?
@AzBigD
Жыл бұрын
microsquirt trans controller for 4l80e, easy setup and comes with plug and play harness. You can change shift points and line preesure. There are many TC's on the market but a few of my buddies already used the microsquirt tc so it was a no brainer for me.
@whofactchecksthefactcheckers
3 жыл бұрын
My 99 tahoe with the 5.7 vortec has a drag racing tci th350 with a ratchet shifter, I love it even though I get about 8 mpg with the trans and lower gears in the rear end. The speedometer doesn't work but GPS said it runs at 2k rpms at 35 and 3k at about 55-60 so I've learned to drive without it lol
@t3tv50
3 жыл бұрын
6.1k subscribers you better start posting more
@FinalBossGarage
3 жыл бұрын
I know man. Im slacking.
@connerchampion5656
3 жыл бұрын
I love the Ford C6 its on par with the GM Th400 and the mopar TF A727. Its fords original heavy duty from 1966-1996. Some people gripe that its a power robber, reason is its because of the dated thrust washers. If you went to thrust bearings in the C6 aka rollerizing it like the E40d and 4r100 it would help alot. Putting in a E40d or 4r100 planetary in a C6 will help too.
@Ruthlsss
3 жыл бұрын
Would you happen to know your driveshaft length? I am currently doing a Big Block with a TH400 build. Thanks for the video.
@FinalBossGarage
3 жыл бұрын
I dont remember but I have aftermarket motor mounta that have like 2" of adjustment. I wouldn't base yours off mine
@Ruthlsss
3 жыл бұрын
@@FinalBossGarage yeah. I’m staying in stock location. Thanks for the quick reply.
@keysautorepair6038
3 жыл бұрын
Putting a 4500 stall in a daily is a bad idea the converter is always slipping building heat it won't last long bet.
@FinalBossGarage
3 жыл бұрын
Far from a daily. It sees the road once a few months. It also has 2 trans coolers.
@underfedcoyote5.022
3 жыл бұрын
I want to swap my car to a th400 think it would be much better then my 6r80. I just need to become big time KZitemr and make all that money.
@jadrinue8085
3 жыл бұрын
Nice I am going to be running. A 6.0l lq4 stage 4 btr cam with a built th400 here in las vegas give u props.sick build on the maro
@eliastables9212
3 жыл бұрын
Me to lol same damn swap
@jadrinue8085
3 жыл бұрын
@@eliastables9212 nice what did u swap
@313cbrown
3 жыл бұрын
Same here! Lol
@Ghosts_and_Cars
Жыл бұрын
How tall are those tires? I see its running a 3.42 gear.
@FinalBossGarage
Жыл бұрын
28” I sold them and plan on going 26”
@Texasmule
2 жыл бұрын
My 350 burned out 2 700R4s so Ig this is my only choice left...
@xravenhairsexgod
3 жыл бұрын
Damn that's a long chime after ignition. My ears are bleeding lol 😼
@FinalBossGarage
3 жыл бұрын
Drives me nuts man
@AustinHarmon1994
3 жыл бұрын
I'd swap the stock one out for a 4th gen one.
@Dannymclovin
3 жыл бұрын
I have an ls swapped z31 with an nissan 5 speed it's pretty beefy and handles the power well but I'm wondering If it was just better to do an auto swap idk the whole novelty of having a stick has wore off I suppose idk any advice
@FinalBossGarage
3 жыл бұрын
If the 5 speed works just keep it. T56 are expensive. You might also look at a cd009 trans from a 350z. Would probably sell for less with a auto.
@Dannymclovin
3 жыл бұрын
@@FinalBossGarage meh the cd009 with the adapter ends up costing as much as a used t56 I got a 2wd gtr transmission and yes I suppose your right I appreciate your response man you got the nicest 3rd gen around it's the orange paint that makes it pop
@fordmanx3
3 жыл бұрын
Was a Adapter used??
@jonathanlawson4667
3 жыл бұрын
What rear set up do you have? Also check out my 91 Camaro on my channel I restored
@adriancastillo6892
3 жыл бұрын
I plan on rebuilding my 350 to a 383 stroker with a edelbrock 600 cfm 4 barrel and lunati voodoo cam paired to a 700r4 with a shift kit and slaping it into a 90's firebird
@ryanmatthews3798
3 жыл бұрын
What are your rear gears ? Wrapping up my motor this is my dilemma stuck between going turbo 400 or tossing the built to the moon 700r4 I have sitting around
@westganighttrain5166
3 жыл бұрын
What gear are you running?
@FinalBossGarage
3 жыл бұрын
I run a 3:42
@adriancastillo6892
3 жыл бұрын
I recommend the 700 r4 because the overdrive is killer. I can cruise down the highway at 70 at 3500 rpm
@johnstonracing6715
3 жыл бұрын
Add turbo and drop to a 3.0 gear!!
@FinalBossGarage
3 жыл бұрын
Shhh..... quit telling everyone my plans!
@johnstonracing6715
3 жыл бұрын
Everything is better with a turbo! Racecar is turboed, streetcar is turboed, tow truck is turboed...
@FinalBossGarage
3 жыл бұрын
Yeah, man thats the plan. No crazy high HP goals or anything. I just need more content for you guys. Going to do a full turbo build using nothing but ebay parts just for shits and giggles. Also trying to do it with a $1k budget. Will be a fun challenge.
@johnstonracing6715
3 жыл бұрын
Let me know if you need any help. I’ve done a couple of them over the years.
@samsteve9306
8 ай бұрын
You need a VSS hook up on your transmission, it’s not communicating with the brain to let it know that its moving !!!
@MichaelJones-jl8tr
3 жыл бұрын
🤘 to the rockstar
@vortexgen1
11 ай бұрын
Install a GearVendors O/D behind the TH400 just like Jay Leno does with almost all of his auto cars.
@daleprice8161
9 ай бұрын
Iv got a 83 firebird looking at swapping the 700 for a 400 not looking for drag racing maybe being able to smoke the tires and goofing around some but not drag racing ..will I still need to upgrade the torque converter
@curvedclub6444
Жыл бұрын
Friend, I still have a question, I have a 1970 C10 with pitch 11/41, which transmission do you recommend the TH400 or the 700R4?
@speedylit89
3 жыл бұрын
Does driving at 3500 to 4000 rpms affect engine temp? I’m running a th350 and was concerned about the high rpms
@FinalBossGarage
3 жыл бұрын
I think it effects the trans more than anything. My motor stays at 180. I've never had cooling issues.
@mike-bj4dk
3 жыл бұрын
what do you mean is it worth it and hell yeah i daily drive my truck with a th400 get about the same mileage as my other truck with same engine and 700r4 so yes why do people question it you dont need overdrive
@stuchbrosmnore8627
3 жыл бұрын
Yep. Overdrive is for the ones who wants to go 100mph on the interstate. I on the other hand just want to go 70mph which ia the speed limit on the interstate , here in Louisiana . I got a 83' c20 dually . with th400 and 275/80/r16 tires. Basically 33inch tires . I want to go 392 gears to get to 70mph and thats it. currently it goes 58mph.
@stuchbrosmnore8627
3 жыл бұрын
Forgot to mention by the way that the engine is a 454.
@mike-bj4dk
3 жыл бұрын
@@stuchbrosmnore8627 mines a 5.7 th400 with 265/75/16s and running 3:73s out back so im pushing like 2900 rpm at 70 according to the math i have no tac.
@stuchbrosmnore8627
3 жыл бұрын
@@mike-bj4dk 2900 not bad. I might go ahead and put in 4:10 and that's it.
@adrianmr.gbodyt2359
3 жыл бұрын
What rear gear you run
@FinalBossGarage
3 жыл бұрын
3:42
@armyant7436
Жыл бұрын
Whats gears you have 3.73 4.11 3.55 3.08
@Somestockish
3 ай бұрын
I’m in Vegas also
@juniorjr9011
7 ай бұрын
What size driveshaft?
@mrmurdock2u247
Жыл бұрын
Yeah to you hit the highway
@armyant7436
Жыл бұрын
Whats your gears in rear
@davechambers5387
3 жыл бұрын
seat belts , anyone ???
@namonttegrisby8789
3 жыл бұрын
What did you do for the touqre arm
@stevehernandez1637
2 жыл бұрын
What is your top speed with out over Reaving the motor
@FinalBossGarage
2 жыл бұрын
I did 147mph on the dyno. Revved out to 5800rpm.
@MrYukon04
10 ай бұрын
I don't know why you said you have to get a shift kit that doesn't make it shift any higher in the RPMs you have to change that in your tune
@billskalicky5400
8 ай бұрын
Wrong. In turbo 400 shift points at wot are controlled by the weights in the mechanical governor in the transmission.
@MrYukon04
8 ай бұрын
@@billskalicky5400 Shift kit does not make it shift at a higher RPM it makes each shift firmer shift points are whenever you shift it at least in a manual reverse setup that's exactly how it is
@billskalicky5400
8 ай бұрын
@@MrYukon04 did you read my comment? I speak about a governor not the shift kit.
@MrYukon04
8 ай бұрын
@@billskalicky5400 yes and I was talking about the shift kit. He was saying he needed one to shift at a higher RPM. Shift kit aren't for that
@somebodyyouusetoknow4532
3 жыл бұрын
What size tires?
@rrussian0101
3 жыл бұрын
Try a two speed ت #simply amazing...!
@csfghjt5564
2 жыл бұрын
You ever drive 400 horse w a two speed?
@caelinbuenger7095
3 жыл бұрын
Bro what color is that
@gabe1303
3 жыл бұрын
Orange ?
@oldschoolbudgetracing1458
3 жыл бұрын
The metric 200 trans that was in the 82 and 83's are the same demesions as a th350. So the drive shaft, crossmember and yoke all work with a th350. The th400 has a differant yoke and is longer than the th350 so the crossmember will not work either.
@fordmanx3
3 жыл бұрын
I woulda kept my 700R4 😑
@TheRv1890
3 жыл бұрын
What did you use for the Kickdown switch?
@rollawallace4937
3 жыл бұрын
Th400 dont have kickdown. 700r4 do and I think th350s do also
@TheRv1890
3 жыл бұрын
@@rollawallace4937 Right. The 700r4 and th350 have kickdown cables, but the th400 has a kickdown switch.
@crematedable
3 жыл бұрын
@@TheRv1890 th350 can do vacuum kickdown I do believe
@chadstevens8086
2 жыл бұрын
Turbo, nitrous cam matched with 4500rpm converter with 20” wheels for drag racing…. Makes sense
@FinalBossGarage
2 жыл бұрын
Dang man, sounds like you have quite the build going on.
Пікірлер: 81