Im actually getting this for my Christmas, my dad was in the Falklands War so im building a small collection of aircraft from the war for the 40th anniversary (Super Etendard, This A4, Mirage 3E, Dagger etc)
@mh53j
2 жыл бұрын
Finding the Dagger may prove difficult. Only decent one I know of is from High Planes Models, believe they are in Singapore. PM models from Turkey made one, but it's pretty poor. I'd like to get my hands on a Dagger as well, along with a Pucara. When I was in the USAF, I actually met one of the Pucara pilots that was shot down and captured.
@ModelMinutes
2 жыл бұрын
Sounds good!
@charliehogg1639
2 жыл бұрын
@@mh53j Yeah the Dagger and the mirage 3E were hard to find, ultimately i will buy the High Plane models as it is practically the only choice, and for the mirage i bought the Heller Mirage 3 with E variant with aftermarket decals, it doesn't come with armament and although an old Revell kits of the argentine mirage has bombs the mold has large gaps and bad flash. My dad who was onboard HMS plymouth respects the Argentine pilots alot, being how dangerously low they flew to avoid detection and AA even though his ship was bombed and attacked by daggers,
@mh53j
2 жыл бұрын
@@charliehogg1639 I found a 3-D printed Dagger nose that can be fitted to the Heller Mirage III from a guy in Argentina, but that alone would cost over $30. Think PJ Productions have the Matra 530 missile and 550 Magic missile used on the Argentine Mirages.. One of the decal sheets I have has a camouflaged Sea King used by Argentina... think I'll try that instead of the fast jets! Osprey publishing recently came out with a book on the Naval War in the Falklands...you might be interested in it; covers many of the air attacks by the Argentines.
@charliehogg1639
2 жыл бұрын
@@mh53j PJ production do several Mirage 3Es, dont know of they do Mirage 3EAs though, i am planning to buy thier aftermarket M.550 magic amd 530 missles
@itsmeoli3705
2 жыл бұрын
I finished mine a couple of weeks ago, loved it! I’m on a real Navy plane kick right now, have an A-6 on the way. Love your channel my guy, I’m in the hobby around a year now and your videos have been a great source of enjoyment!
@ModelMinutes
2 жыл бұрын
I'm glad you enjoy my videos! :D It's good to hear you had a nice time building this kit
@mh53j
2 жыл бұрын
It's also available as a Dogfight Double with the Sea Harrier in the 2012 Falklands 30th Anniversary set. Biggest problems are very basic weapons loads and Argentine version missing the very prominent antenna (VOR/ILS?) on each side of the vertical stabilizer. I'm making both an Argentine A-4B and, using a Brengun conversion, A-4C. Have to make a " shark fin" antenna for "c" version ( found one on an Airwaves Sea King photo etch set!)
@ModelMinutes
2 жыл бұрын
Thanks for the info!
@PandaXs1
2 жыл бұрын
yo any tips on the antenna? I also want to make the Argentine version, but I'm really not sure what to do about that.
@mh53j
2 жыл бұрын
@@PandaXs1 still working on that myself. I've found 1/48 aftermarket resin updates but nothing in 1/72. I found a circular piece (think for the dipping sonar) in an old Airfix Sea King that can be cut in half, but it's a bit too wide. Think the best thing will be to use some very small diameter brass tube I have from Tarmac (intended to be used for gun barrels) and then find something the correct width to bend it around... maybe an old paint brush handle with a groove notched in it so the tube won't slip and the antennas will be the same width... Then comes trying to get them located on the same location on each side of the stabilizer... This is the biggest problem keeping me from starting them. Airfix did the same with their Sea King kits...left off the prominent VOR/ILS antennas on the tail. Even their 1980s HAR 3 release had them. If you figure it out let me know as well! Honestly, I don't know how Airfix overlooks something like this.
@PandaXs1
2 жыл бұрын
@@mh53j I have a feeling the Argentine colors were kind of an afterthought, and afaik the A-4 Argentina used was unique to Argentina so I can imagine it's a pretty niche conversion as it is. I have been able to find plenty of reference photos at least, but it makes me even more hesitant; it's not a simple loop and there's these wide hexagonal bases where the antenna goes into the tail as well. the only thing I've seen was on Flying S Models, but he basically did what you described, except after he had finished painting the model since it seems he missed it.
@isamudeath
2 жыл бұрын
@@mh53j Maybe you can use copper wire for the antena, like te ones used on ethernet cables
@lancerevell5979
2 жыл бұрын
Watching this, I went and ordered it. I have built it before, in the Argie scheme, so I'll do the USN scheme this time.
@ModelMinutes
2 жыл бұрын
nice!
@maxbrandt6
2 жыл бұрын
I like Skyhawks and I don't have any early variants in my collection so I'll be seeking out this one but aftermarket decals are a must. Someone gave me that ancient Airfix kit of the A4D-1, it came in a bag and it was not good and had no decals!
@ModelMinutes
2 жыл бұрын
oh no!
@campbellbrand8038
2 жыл бұрын
Found a wee model shop in Jersey and bought this kit there. The guy runs it has a hobby as it is not viable to make a living from. I recall seeing the Argentinian Navy A4 Skyhawks attack HMS Ardent in 82 during the Falklands war. Previously built the Argentinian Air Force one which is the exact same as this kit except for decal sheet. The Grupo 5 Skyhawks flew very low over our position on Sussex Mountain for several days.
@ModelMinutes
2 жыл бұрын
Thanks for sharing your story :)
@Lt.Gruber
2 жыл бұрын
The Argentine markings are for Carlos Lecour’s aircraft from May 21st 1982. Carlos was flying as second with his flight that attacked the previously damaged HMS Ardent. Approaching low at at the HMS Ardent’s stern at about 20 feet (to avoid seaDart and SeaCat) with his ground collision warning blaring Carlos landed his ordnance onto the crippled hanger then banked hard and fled the area as Sea Harriers approached. Even though he wasn’t the first aircraft to attack, He started the subsequent fire that sunk the ship. I have this kit also and I’m happy that Airfix included this scheme but failed to mention the pilot on the markings. I plan to build Carlos’s aircraft myself
@ModelMinutes
2 жыл бұрын
thanks for the info!
@chrishumpal3780
Жыл бұрын
Currently building this kit. I did notice a poor fit on the engine intakes. Honestly, I believe they were numbered incorrectly on the sprue. I cut the tabs off and swapped them from one side to the other. Perfect fit. Hope this helps.
@ModelMinutes
Жыл бұрын
Thanks for the info!
@leesouter9627
2 жыл бұрын
Now we're talking I picked this kit up in a charity shop for £3.00 last week was planning on starting it this weekend looking forward to this video.
@ModelMinutes
2 жыл бұрын
That's actually a really good price for this!
@MOS6510Models
2 жыл бұрын
Great video again mate.. shame about the engine not quite moulded properly but we have raged before that Airfix Quality control is poor
@ModelMinutes
2 жыл бұрын
yeah, it's a bit of a shame
@lpjmodels
2 жыл бұрын
With companies out there really pushing the field in moulding its a shame airfix are still stuck in a rut.. granted they have come along leaps and bounds in the last 10 years, but if they sorted out the fine details, QC and occasional borky fit lots more people would buy em
@MOS6510Models
2 жыл бұрын
@@lpjmodels I agree with everything you said there!!
@stuartwren5526
2 жыл бұрын
Just got this myself. Remember building the original back eons ago and don't remember how it went. I'm going for US scheme and hope to start before Xmas but busy domestically. Looking forward to comparing notes. Take care and have a great Christmas.
@ModelMinutes
2 жыл бұрын
Have fun! I'm not sure when this one will cross my bench but hopefully not too long . . .
@jeff72_
2 жыл бұрын
Seems like a nice kit, even with soft detail it should be a good build. I think the Argentinian Naval Aviation scheme would be topical and a deviation from the norm. Looking forward to it!
@mh53j
2 жыл бұрын
If you can find the 1/72 decal sheet from Aztec (set #1), there are several different Argentine Skyhawk schemes; Xtradecal also has a sheet with Argentine A-4Cs, which would require a Brengun conversion for the proper nose. Argentine color schemes during the war were pretty diverse.
@ModelMinutes
2 жыл бұрын
thanks for the suggestion!
@argentinianspotter
2 жыл бұрын
When you build it, make sure to fill the union between both intakes and the fuselage. There're big gaps on those areas. Also, the Argentinian version doesn't have the white ailerons on the wings, they're painted in light grey.
@ModelMinutes
2 жыл бұрын
thanks for the info! I'll have to keep that in mind
@anjkovo2138
2 жыл бұрын
Great presentation. Thanks 👍😀👍❤
@ModelMinutes
2 жыл бұрын
Glad you enjoyed it
@mikes5637
Ай бұрын
Bit late to the party here but this would be an ideal subject for a 1/24 scale kit.
@ModelMinutes
Ай бұрын
probably a very large model if they did design one
@jamesmorgan3623
2 жыл бұрын
I've only recently started building models like this, and having come from a table top war gaming background, £15 seems like an absolute steal for a nice little kit like this.
@ModelMinutes
2 жыл бұрын
Yeah, those wargaming models do seem expensive
@anjkovo2138
2 жыл бұрын
I'd like to see a vid on your top 5 best models for Christmas presents please
@ModelMinutes
2 жыл бұрын
Thanks for the suggestion - I haven't actually got one of those videos but could look into it in the future. Sadly, The only problem with this kind of topic is that it can change depending on the different kits I build . . . .
@tefras14
2 жыл бұрын
I love these cold war jets! I think the Argentine paint scheme looks really nice
@ModelMinutes
2 жыл бұрын
that blue on the tail certainly makes it a little more interesting
@mintyprojects
2 жыл бұрын
It sounds like the tooling for this version was released around the time of the 30th anniversary of the Falklands War, and as we are approaching the 40th anniversary next year I think it would be nice to complete it in the Argentinian colours.
@ModelMinutes
2 жыл бұрын
Thanks for the suggestion!
@danieltsimbler343
2 жыл бұрын
Wow! This is the exact model I'm working rn!!
@ModelMinutes
2 жыл бұрын
You like it? Naturally my only experience of it is looking in the box, how is the build?
@seantaplin581
2 жыл бұрын
For white, you can add a drop or 2 of black and it makes it less '' see-through''
@ModelMinutes
2 жыл бұрын
and a bit grey i imagine :P
@seantaplin581
2 жыл бұрын
It looks it, but on the model it is white.
@ModelMinutes
2 жыл бұрын
@@seantaplin581 nice
@ja37d-34
2 жыл бұрын
Skyhawks are nice and I like Airfix for what they are.. :)
@ModelMinutes
2 жыл бұрын
:D
@MichelGehasse
2 жыл бұрын
The slats on the leading edges of the A-4 where free moving. If you build the kit wheels down, you should model the slats extended.
@ModelMinutes
2 жыл бұрын
Thanks for the info!
@hozongxi
2 жыл бұрын
Building my 2nd one right now!
@ModelMinutes
2 жыл бұрын
nice!
@SJsharkfan91
2 жыл бұрын
The starter version of this was my first kit ever- I don’t think it was too difficult to assemble, nor was the paint scheme.
@ModelMinutes
2 жыл бұрын
nice!
@foreverplastickits138
2 жыл бұрын
*Nice kit review, soon on your bench?😉*
@ModelMinutes
2 жыл бұрын
maybe . . . .
@ShuttleFactoryScaleModels
2 жыл бұрын
That's a downer you had a broken part on the wing. So long as you saved the part, it can be fixed with a tiny drop of cement. Also this looks like a nice Skyhawk kit, good luck with the build. Hope no more parts break on you BTW!
@ModelMinutes
2 жыл бұрын
Haha thanks!
@garyhunt4032
Жыл бұрын
Just starting one of these, it's out of the dogfight double, Falkland war version ,so a different camouflage scheme,the kit looks OK...let's see how it goes
@ModelMinutes
Жыл бұрын
good luck!
@glencwilson
2 жыл бұрын
Nice review, seems a bit pricey at £15 for what is in there but would get one if it was about £10. Painting white on even small areas with a brush can be a challenge but I have found Tamiya acrylic thinned about 50/50 with something like rapid drying lacquer thinners works well with an airbrush gives consistent results. May need a few coats to get an even finish but result is usually very good.
@ModelMinutes
2 жыл бұрын
Thanks for the tip!
@paulfrantizek102
2 жыл бұрын
I'd recommend the Argentine scheme. USN schemes are fairly common, and this one isn't especially striking (if it was the Lizards, it would be a more difficult choice).
@ModelMinutes
2 жыл бұрын
thanks for the suggestion!
@davidfernandes920
2 жыл бұрын
I would choose the US Navy markings and paint scheme.
@ModelMinutes
2 жыл бұрын
Thanks for the suggestion!
@dcmchugh99
2 жыл бұрын
Might be an idea to do a comparison with the original Airfix A4D-1 kit. Although this may be a basic kit by today's standards it's complicated and well armed compared to the original!. You could even challenge yourself to make the old kit and see if you can modify it as close as you can to the current version.
@ModelMinutes
2 жыл бұрын
Thanks for the suggestion! Not sure I should be buying more kits at the moment lol
@lpjmodels
2 жыл бұрын
It's a shame about the cockpit detail, a bit empty but I'm sure there are aftermarket options. Cool vid matt thanks !
@ModelMinutes
2 жыл бұрын
Thanks for watching! Yeah, there are a few little problems but should be easily overcome
@lancerevell5979
2 жыл бұрын
Realistically, once pilot is in place and the wee canopy on, no cockpit detail is visible.
@egyeneskifli7808
2 жыл бұрын
I really don't understand the pricing of this kit. The Hobby 2000 Skyhawks are somewhat cheaper, and still have better detail level, especially in the cockpit. And those are the reboxes of the Fujimi Skyhawks, originally hit the market in 1987.
@ModelMinutes
2 жыл бұрын
Yes, I had heard the fujimi kit was good, perhaps I’ll be lucky enough to do a comparison
@egyeneskifli7808
2 жыл бұрын
@@ModelMinutes That would be interesting.
@charliehogg1639
2 жыл бұрын
Also if your doing the Argentine livery, during the Falklands they only had Mk82 American bombs for their naval A4Q the mark 82s are an option in the kit
@ModelMinutes
2 жыл бұрын
thanks for the info!
@mh53j
2 жыл бұрын
Argentine navy also used snakeye bombs. There's a pretty well known photo of an Argentine naval A-4 (aircraft 3-A-305) being readied (for a later aborted mission) on their carrier with a snakeye bomb in the foreground with "HMS Invincible" written on it. Snakeyes also used against HMS Ardent (including aircraft 3-A-307).
@edwina.8426
Жыл бұрын
@@mh53j airfix included also the "hms invincible" white letters on the decal sheet so You can add it to the bomb
@franktozier3184
2 жыл бұрын
The Argentine version looks good.
@ModelMinutes
2 жыл бұрын
I think they both do, not sure which one to do yet
@9501599
2 жыл бұрын
Build the Argentine model, I like the Sky Hawk we, the RNZAF, had the A4K version it has an avionics hump on the top which I think makes the aircraft look like a sandfly. Looking forward to the build 😀
@ModelMinutes
2 жыл бұрын
Thanks!
@jozeffrantisek4578
2 жыл бұрын
Hey Matt, long time no see!😅 I am quite a fan of A-4 Skyhawk as an aircraft. Must say it is one of my favourites, so i decided to by almost every kit that i could find on the today’s market😅. This kit is good, no doubt about that, but, at the end of the day, Fujimi one is still better (as far as i am concerned). It has more discrete panel lines and plastic is better. Both kits suffer from lack of cockpit details, and that is more unfortunate for Airfix since it is 30 years ahead of Fujimi in terms of age! Nevertheless, now, you can easily find Fujimi Skyhawks in Hobby2000 boxings, with Cartograph decals, and a nice sheet of pre-cut masks for cockpita. The price is similar to the Airfix kit, but you will see the difference, when compared, right away….
@ModelMinutes
2 жыл бұрын
Perhaps i'll have to look into getting one of those!
@Aardvarkdk1
2 жыл бұрын
Please do the Argentinian one, since so many aircraft are USAF or US Navy...
@ModelMinutes
2 жыл бұрын
thanks for the suggestion
@Ramiiam
Жыл бұрын
Every manufacturer seems have their own opinion of what 1/72 means.
@ModelMinutes
Жыл бұрын
yes, there are some inconsistencies
@Andy.Gledhill.Models.
2 жыл бұрын
Honestly, it all looks a bit naff. Even as old as 2012, you would expect better detail for a kit of that age. There are far better 1/72 scale Jet Aircraft kits out there. This is one of the reasons why I tend to steer clear of building 1/72 aircraft. I much prefer 1/48 or bigger, mainly because I am 59 years old and my eyesight is poor for close up work lol.
@ModelMinutes
2 жыл бұрын
It's not a bad kit, its just not one of their best
@BJJISTHEGAYPARTOFMMA
2 жыл бұрын
With the white colour problems you’ve had, have you considered picking up some Vallejo model colour in white? I have had much better luck with Vallejo white over any other brand.
@PeteCourtier
2 жыл бұрын
Tamiya LP white is really good 👍
@ModelMinutes
2 жыл бұрын
I have used that, found it kept drying in the nozzle really quickly
@BJJISTHEGAYPARTOFMMA
2 жыл бұрын
@@ModelMinutes that’s the only bad thing I can say about their paints. Wish they came in pots rather than squeezy bottles.
@BJJISTHEGAYPARTOFMMA
2 жыл бұрын
@@PeteCourtier tamiya is one of my go to’s aswell can’t go wrong
@ModelMinutes
2 жыл бұрын
@@BJJISTHEGAYPARTOFMMA oh, i like the dropper bottles. I meant the paint dried in the airbrush nozzle rather than the bottle lol
@wafflyfox7550
2 жыл бұрын
Nooo I missed it :( do you have any tips on buildings?
@ModelMinutes
2 жыл бұрын
always next time Tips on building what?
@wafflyfox7550
2 жыл бұрын
@@ModelMinutes yeah I suppose, I meant building buildings like houses
@ModelMinutes
2 жыл бұрын
@@wafflyfox7550 oh right, I haven’t built a house since I was really into model trains. I’m looking at doing some stuff on that in the future so watch this space
@wafflyfox7550
2 жыл бұрын
@@ModelMinutes ok fair enough, I typically work in 1/35 so I guess it’s quite different
@ModelMinutes
2 жыл бұрын
@@wafflyfox7550 ah, yeah, just a bit. Didn’t night shift so some buildings?
@stephenchadwick4249
2 жыл бұрын
you could do the sky hawk for the rnzaf form the 2000s
@ModelMinutes
2 жыл бұрын
thanks for the suggestion!
@stephenchadwick4249
2 жыл бұрын
@@ModelMinutes i have built one in 1/48 scale i think that the paint skim looks nice on the sky hawk matt
@tomroland2315
2 жыл бұрын
Built the older version decades ago so would like to try this one having seen your review. I see there is a dogfight double with the North Vietnamese MiG 17 so another option there. Share your pain regarding getting a decent white paint finish have to admit I resort to a rattle can and even then it's not always brilliant. I think USN for me as regards a version to build.
@ModelMinutes
2 жыл бұрын
thanks for watching!
@seantaplin581
2 жыл бұрын
how to get a brush mark free finish, hand painted in white?
@ModelMinutes
2 жыл бұрын
white is such a hard paint to use, especially by hand painting. i would suggest thinning tamiya flat white with their thinner and using that, leaving a few hours between coats, but if i'm honest, i've started using a white spray can because it is just easier
@lancerevell5979
2 жыл бұрын
I use two coats of Tamiya white primer, then mask and paint the light gull gray.
@danieltsimbler343
2 жыл бұрын
Pls build the US one! I really wanna see it. But if me saying that that's the one im making makes you change your mind, no problem, then theres two different ones
@ModelMinutes
2 жыл бұрын
thanks for the suggestion :P
@bernsmaga
2 жыл бұрын
This looks very good i might even try it! Please create affiliate links and you might get some extra cash 😁😂
@ModelMinutes
2 жыл бұрын
I create affiliate links for products I can find them for. If there isn't one on this video it's because I can't find one
@bernsmaga
2 жыл бұрын
@@ModelMinutes ok i was just saying! Love your vids by the way u inspired me to make the Afro lancasster
@campbellbrand8038
2 жыл бұрын
Build the Argie one all day long
@ModelMinutes
2 жыл бұрын
thanks for the vote!
@ODESSARAILFAN
2 жыл бұрын
Any plans yo get new mosquito by airfix soon ?
@ModelMinutes
2 жыл бұрын
not currently, but maybe in the future
@seantaplin581
2 жыл бұрын
if i use a paintbrush to apply humbrol poly cement (the stuff in the yellow tube), how can i clean it off my brush, so it doesn't go crusty?
@ModelMinutes
2 жыл бұрын
i'm not sure you can . . . depending on what the brush is made of it could possibly melt the fibres together. Unless anyone else knows of a cleaner for polycement I think it would be a single use kind of deal for that brush. If you think about it, the only cements that come with brushes are the thin liquids, the thicker gels dont. Perhaps use a toothpick or something like that to apply the cement instead of a brush then you can dispose of it afterwards
@seantaplin581
2 жыл бұрын
its a humbrol brush
@ModelMinutes
2 жыл бұрын
@@seantaplin581 humbrol has a number of different brushes which they sell, but the brand still makes no difference to my previous comment
@ModelMinutes
2 жыл бұрын
@@seantaplin581 you’ll probably end up ruining the brush
@beaverchicken
2 жыл бұрын
@@seantaplin581 just get tamiya extra thin. Better glue, comes with brush
@MarMightyGood
2 жыл бұрын
Had a good time making this kit but managed to munt the canopy. Not being one to give up I bought another kit and took the canopy from there, so now have a full kit with no canopy. Might do a bit of a ‘what if’ and arm it with nukes for a fictional deterioration of NZ-Australian relations.
@ModelMinutes
2 жыл бұрын
sounds interesting
@pitanpainter2140
2 жыл бұрын
Given that next year is 40 years after the Falklands war, I'd suggest you go with the Argentine scheme. You could, perhaps, display it next to a Sea Harrier?
@ModelMinutes
2 жыл бұрын
great idea! Not that I should really buy any more kits at the moment haha
@lancerevell5979
2 жыл бұрын
Makes me feel old! As my USN frigate returned to Norfolk, Va. in 1983 coming back from deployment, we saw one of the British carriers tied up, visiting after leaving the Falklands area. She looked very weatherworn! The South Atlantic is brutal on ships. During our deployment, stopping in Mombasa, Kenya, the Seamen's Mission displayed plaques from many ships. We saw one for the HMS Sheffield, and we raised a toast in her honor. Brave lads, a sad loss of a fine ship.
@dalisegall5394
2 жыл бұрын
Hahaha why is it everytime I watch a video of your I want to buy that kitt
@ModelMinutes
2 жыл бұрын
modelling is addictive :D
@dalisegall5394
2 жыл бұрын
@@ModelMinutes hahaha I now I bought way to many kids that I don't have time to finish them. Then keep buying even more hahaha.
@mig-21interceptor62
2 жыл бұрын
I was gonna get this but I got a f-16 instead lol
@ModelMinutes
2 жыл бұрын
nice!
@muhammadhilmi7590
2 жыл бұрын
If you paint this model,please do so in Argentinian colour scheme. 😊
@ModelMinutes
2 жыл бұрын
thanks for the suggestion!
@harambecomrade2407
2 жыл бұрын
Im building a zvezda MiG 21Bis
@ModelMinutes
2 жыл бұрын
nice!
@kentishmale1969
2 жыл бұрын
At the very least it gives a Sea Harrier something to destroy…
@ModelMinutes
2 жыл бұрын
I'm sure there was a dogfight double set featuring a harrier and skyhawk
@mh53j
2 жыл бұрын
@@ModelMinutes hoping it will be re-released this coming year with the 40th anniversary of the Falklands War. Pretty sure the FRS 1 is being re-released. Hoping for other Falklands related subjects... we'll see.
@massmike11
2 жыл бұрын
The skyhawk is so small I would really prefer a larger scale, say 1/24
@ModelMinutes
2 жыл бұрын
or 1:1 scale perhaps :P
@lancerevell5979
2 жыл бұрын
Hasegawa makes a nice Skyhawk kit in 1/48.
@pfsmodellingprojects
2 жыл бұрын
Airfix's quality control is non existent, manufacturing needs to be returned to the UK to alleviate the problem and until it does, I for one, will not be purchasing anymore of their kits. Short mouldings, seen it all before on their kits, not fit for purpose..
@ModelMinutes
2 жыл бұрын
It's certainly upsetting at times, which is a shame because some of their kits are rather good
@markshellard5894
2 жыл бұрын
Airfix could be so much better
@ModelMinutes
2 жыл бұрын
couldn't they!
@davidcole8268
2 жыл бұрын
Argentine
@ModelMinutes
2 жыл бұрын
thanks!
@thomasbell6655
2 жыл бұрын
Gave up on Airfix, most kits rubbish and inconsistent kit quality.
@ModelMinutes
2 жыл бұрын
there is definitely an inconsistency I'm finding at the moment
@simonbradburn2375
2 жыл бұрын
Airfix kits are crap.
@ModelMinutes
2 жыл бұрын
as with most manufacturers, i find that there are some good and bad products in most ranges
Пікірлер: 173