I tried them all and settled with AuraSound AST-2B-4. I have four of them installed in my seats. They feel amazing.
@TraumaTeamRacing
7 ай бұрын
I am also really happy with the AuraSounds. Not much in it compared with the Dayton shakers, but I definitely feel it's the superior shaker.
@bakerfx4968
6 ай бұрын
What locations do you have your shakers in?
@TraumaTeamRacing
6 ай бұрын
@@bakerfx4968 This shows the positioning and mounting of my shakers plus the two on my pedal deck 👍🏻 kzitem.info/news/bejne/x6Bnu22KjZ96dYo
@DrAlanQuan
Жыл бұрын
Thanks for running the tests so we don't need to! I bought 2 Daytons because that's what most people write about. I was surprised by the price (and aggressive styling!) of the Auras. Cool video 👍
@TraumaTeamRacing
Жыл бұрын
You are most welcome Alan. It was a question I always wanted the answer to. The Daytons are really solid and are a lovely middle ground between the two on offer, you made a good choice. I must admit having several landmine-esque shakers mounted to my seat is quite a look 😅
@joseywales1039
4 ай бұрын
I wasted a few hundred quid messing around with Nobsound amps and Daytons. I now use a single Earthquake MQB1 powered by my old Yamaha 200w stereo amplifier mounted under my seat. Buy once, cry once
@DrAlanQuan
4 ай бұрын
@@joseywales1039 I just googled the earthquake - wow. That's a big piece of equipment! I love the home theatre amp suggestion though. I used to run a Yamaha amp which is awesome but it's in the home theatre now. I do have access to a spare Denon 7.1 amp though!
@YoastZilla
Жыл бұрын
Wow, the cost difference between the Aurosound and Dayton is huge. Dayton Audio would be my choice for sure. Looks better as well imho Thanks for this comparison. I hope you will also do a part about Simhub settings in your bass shaker mounting video. Especially the frequency part.
@TraumaTeamRacing
Жыл бұрын
You are most welcome mate 👍🏻 The cost difference is massive between the two. However, if an offer came along the AuraSounds definitely do pack that little extra punch and I'm very glad I've got them. The Dayton also has a slightly smaller form factor which would aid mounting in tight spaces. Initially, regarding the aesthetic I would have agreed, but now there is something quite satisfying about having the rough and ready AuraSounds strapped to my rig 😅💪🏻 Actually going to break them down into 2 separate videos mate💪🏻 Mounting 1st then I'll pop in and do tuning 👍🏻
@schweinsbradl7165
Жыл бұрын
thx, for the test. i use your affiliate link and bought the aurasound, they are in sale for 64 bucks.
@TraumaTeamRacing
Жыл бұрын
That is awesome mate! You are most welcome and thanks for using the link! Let me know how you get on with them. I love them on my rig!
@schweinsbradl7165
Жыл бұрын
what can i tell you? its amazing, in vr its so realistic. whats your settings? @@TraumaTeamRacing
@TraumaTeamRacing
Жыл бұрын
I am very happy to hear this! I am glad you are getting so much enjoyment out of them. I love mine and every time I get on it just enhances the experience significantly. I plan to do a video on my settings although they are very individualised depending on your rig. Hopefully shouldn't be too long 👍🏻
@JC-vc7tf
Жыл бұрын
Really nice testing, thanks!
@TraumaTeamRacing
Жыл бұрын
Thank you for the kind words mate! Glad it was useful for you 👍🏻
@jhillmotorsports
Жыл бұрын
Super helpful, thanks so much! Although here in the states, the Aura's are only $20 more vs the Dayton Audio ($75 vs $55) through Parts Express, and they also have a 12% coupon right now for our Memorial Day holiday. Just FYI for my fellow Americans 👍
@TraumaTeamRacing
Жыл бұрын
Thanks for the kind words Jordan! Really appreciate it and glad you found it useful. What set up will you go for? That's a great deal State side for memorial day! Great find 🥳
@jhillmotorsports
Жыл бұрын
@@TraumaTeamRacing I'm planning to do 2 Aura's, 1 under the seat and 1 under the pedals, powered by a Nobsound mini amp, which I hope has enough power. That amp is a pretty popular choice for simracing, so should be good! Then figuring out how to program it all in simhub.
@TraumaTeamRacing
Жыл бұрын
@@jhillmotorsports The Auras will work great on that. I have the same set up. If you check out my other bass shaker video it will show how to set them up for you. The Auras are absolutely quality. Just make sure you get the proper power supply with the nob sounds to drive them.
@jhillmotorsports
Жыл бұрын
@@TraumaTeamRacing the power supply that came with the nobsound should be sufficient... Right? My nobsound arrived (Aura's are still on the way) and I hooked it up to some speakers and I'm pleasantly surprised by the sound quality.
@TraumaTeamRacing
Жыл бұрын
@@jhillmotorsports Double check where you got it from but there were some cases where they sent it with an underpowered power supply I believe. The nobsounds are pretty impressive for what they are 😅
@diamond4829
8 ай бұрын
Appreciate the information, someone should definitely sponsor you, put out some correspondence. I could have made a buying decision right here right now with the Basskickers had be included. But definitely will be going for Aura at this point, I sim race, but I came here for my home theater ..... lol
@TraumaTeamRacing
8 ай бұрын
Ha! Brilliant! How and where will you be mounting the Auras for your shaker set up? Mine are still going strong and I regret nothing. Hope the build goes well for you mate! Thank you for the lovely comment too! I have absolutely no idea how I would go about getting sponsored 😅
@JoseFcoBN
Жыл бұрын
After trying 25 50W bodyshakers of various brands and for 2 years I ended up throwing them all away and bought myself 9 new 100W bodyshakers and zero problems, they are the reckhorn bs 200i and they are better, more definition and punch... they were at €49 per unit and they arrived from Germany in 3 days to Spain. Now I have 8 bs200i on the seat, they are placed one by one, independently and connected in pairs, 2 on the buttocks, 2 on the ass, 2 on the kidneys and 2 on the shoulder blades, I also have another on the gear lever, another 10" diy behind the DD base simulating the bonnet and on the pedalboard I have 2 12" diy bodyshakers that give big shakes and blows. The pedalboard is suspended by 4 springs, and the seat by 4 small wheels with air, both of them parts are isolated from the chassis, avoiding noise and sensory contamination... Everything is fed with 6 24V.20Amp power supplies and 12 mono subwoofer amplifiers with 100w RPM, everything is controlled with 7 preamps from a console placed above the central monitor , which is connected to 2 7.1 audio cards, and Simhub.
@TraumaTeamRacing
Жыл бұрын
These look pretty solid but my only concern with the Reckhorns is that the build quality does not look very good? Have you had any issue? Do you know what the internal springs are made of? You sound like you have one hell of a set up! Do you not get flex when hitting the brake if it is elevated on springs? 2x 7.1 audio cards is a pretty amazing set up 😂 I would love to give this a go 😂💪🏻
@JoseFcoBN
Жыл бұрын
@@TraumaTeamRacing Hello, until today, they are the most solid I've seen, before changing my previous ones, I bought 2 bs200i to test them and the difference was very big, I tried them for months and decided to change everything, I've had them for 3 years and without problems.. On the manufacturer's website there is a video that explains its operation and the interior is seen.
@TraumaTeamRacing
Жыл бұрын
Sounds great! I would love to give these a try. I will check out the video! Thanks! 💪🏻
@pulDag
Жыл бұрын
@@TraumaTeamRacing Hi, did you try Reckhorn BS-200i already?
@TraumaTeamRacing
Жыл бұрын
Haven't managed to get my hands on them yet I'm afraid.
@cberns4
Жыл бұрын
It could be overkill but did you see Dayton Audio also has, Dayton Audio BST-300EX, which is up to 300 watts. Could be overkill but I don't know the other spec differences
@TraumaTeamRacing
Жыл бұрын
I haven't seen this! Probably overkill but I would love to strap this to the rig 🤣
@asmrrelaxationtv8673
Жыл бұрын
Great Content. Thanks For Sharing. Have a nice day!❤👍
@TraumaTeamRacing
Жыл бұрын
You are very welcome👍🏻 Glad you found it useful.
@collinskipruto6946
Жыл бұрын
Awesome job, do a video on the amps next please then later compare your setup with buttkickers. Lots of people will appreciate that.
@TraumaTeamRacing
Жыл бұрын
Thanks Collins! Really appreciate it! I would love to do this, but all of this is self funded and I don't have access to a Buttkicker unfortunately. I would love to compare it with what I am using. Perhaps later down the line I will be able to do so.
@collinskipruto6946
Жыл бұрын
@@TraumaTeamRacing all the best, looking forward to seeing your videos
@TraumaTeamRacing
Жыл бұрын
Thanks for the support mate!
@RevRideReason
Жыл бұрын
Dont get the PUI... got it ! 😅 great review man.
@TraumaTeamRacing
Жыл бұрын
🤣🤣 Well....unless you're in the UK and hate the idea of buying overseas 🤣 Thanks a lot Dan 👍🏻
@RevRideReason
Жыл бұрын
@@TraumaTeamRacing 😂🤘🏼💯
@vintagespeedshop
Жыл бұрын
You can get the Daytons in the UK from Wall of sound
@TraumaTeamRacing
Жыл бұрын
They don't have them 👍🏻
@DiegoBello
Жыл бұрын
Simhub configuration for the Auras in Dirt Rally 2.0 would be appreciated 🙂
@TraumaTeamRacing
Жыл бұрын
Thank you for the suggestion Diego! I shall add it to the production list for you 👍🏻
@SimBunker
2 ай бұрын
They'll ignore it, they've been pushing it aside all these months and dismissing what people have been assuming was wrong originally. They have 15th gen on the horizon, so if the fundamental flaw is not "baked" on the next chip, they might rush this one through. But what's interesting, is the 13th gen has a higher fault rate, but 14th gen is only just behind and still has another year's worth to catch up on 13th.
@TraumaTeamRacing
2 ай бұрын
Was this a comment on the correct video? 😅
@SimBunker
2 ай бұрын
@@TraumaTeamRacingNo 😂😂😂😂 Video must have ended and this was on my "watch next" 🤦🤦🤦🤦
@TraumaTeamRacing
2 ай бұрын
@SimBunker Thought so 😂 Gave me a chuckle 🤣
@SimBunker
2 ай бұрын
@@TraumaTeamRacing Anyway 😂😂 I'm currently saving for the RS motion setup, but I'm thinking of getting bass shakers next, as that's relatively cheap interim to get some more immersion. Is it best to mount these on the outside of the frame, or on the inside (so they're hidden)
@TraumaTeamRacing
2 ай бұрын
Frame mounting won't make a difference. Mount them to the seat 👇🏻👇🏻👇🏻 kzitem.info/news/bejne/x6Bnu22KjZ96dYo
@ranakirti
Жыл бұрын
awesome video. are you also planning to compare the buttkicker lfe and Clark tst 209/239/329 range? Thanks.
@TraumaTeamRacing
Жыл бұрын
Thank you for the kind words. I would love to compare these. But all of this is self funded so unfortunately at present don't think this is achievable. If I can get my hands on them absolutely👍🏻
@filippoferrari2128
11 ай бұрын
How much better us the aurosound? Because now the price is pretty much the same
@TraumaTeamRacing
11 ай бұрын
It's all in the video mate 👍🏻
@b34k97
8 ай бұрын
I wonder what Amp you're using for these tests. I've heard it's more the amp than the shaker that can get you low frequencies. Most are rated down to 20 Hz, but some like the Dayton BSA-200 are rated to go down to 5Hz. My understanding is the cheap amps like the Nobsound don't really do well with low fequencies, but I'm wondering if something somewhere between the Nobsound and Dayton BSA-200 (Like a Fosi TB10D or Aiyima A07) in terms of cost can give you better low freq feeling without breaking the bank.
@TraumaTeamRacing
7 ай бұрын
The shakers have an optimal frequency range of which they are most responsive. If you look at the PUI spec sheet it mentions this. These were driven with a Nobsound amp that was not maxed out. You don't want to overdrive these or you risk burning them out. They don't have any thermal protection I believe. The frequency is dictated by how well the coil resonates and vibrates. 50 watts is 50 watts so as long as the amp is not underpowered it should be fine.
@YACCRacing
Жыл бұрын
Good review. Thank you. I’ve a pair of the PUI…based on some of your earlier videos. 😁 When yours failed did they fail completely? I don’t know if mine have an issue if if it’s the nob sound mini amps I have. Did you have any issues returning for a refund? Cheers.
@TraumaTeamRacing
Жыл бұрын
Thank you very much Yacc, really appreciate it. The PUI at the time I thought were a good option but when comparing they fall below the others here I feel. I still had a good time with them when they were working and was definitely a great experience. The thing here is that all of these are prone to failing due to the plastic spring inside them. If that breaks you are screwed. That is why the warranty is so important. If you got them from the same place I did, Mouser I believe, get in touch with them, I had a 1 year warranty and they replaced them, they would not give me money back as I recall. Even if outside the warranty it is worth giving them an e-mail and I must say I can say nothing bad about the retailer, they were very good with me. Hope that helps.
@SantanaFPV
5 ай бұрын
Now that the Dayton Audio BST-1 is clossed to £80, does that change your mind?
@TraumaTeamRacing
5 ай бұрын
It is ~€56?
@SantanaFPV
5 ай бұрын
@@TraumaTeamRacing let’s hope they don’t change the price when it’s back in stock in two months… £77 on Amazon now.
@TraumaTeamRacing
5 ай бұрын
@@SantanaFPV They have been roughly that price since I made the video, I believe.
@ubacow7109
Жыл бұрын
Arent the results also amp dependent since not all amps have a response that extends below 20hz, and often time a lot of cheap amps have rolloff as they come down to the lower freq?
@TraumaTeamRacing
Жыл бұрын
My understanding is the frequency range is dictated by the speaker. The amp drives the power. The most important factor being the impedance (current flow). These were driven with a 4 ohm amp. Each speaker will have an 'optimal' frequency range. As demonstrated here. Same amp with 4 ohm impedance was used to test all 3 speakers to standardise the results of this test.
@technogov2
6 ай бұрын
Hi. Would the Dayton Audio BST-300EX paired with a Fosi Audio V3 w/48v and a Vantec NBA-200U USB External 7.1 Channel Audio Adapter work well for a racing sim rig? Would it best to mount it under the seat?
@TraumaTeamRacing
6 ай бұрын
I am afraid I don't have any personal experience with either. However, looking at the specifications these should pair well together. Under the seat would be optimal.
@lukechatty6940
Жыл бұрын
So i want to get one of these. Probably dayton can you mount 2 at the same time then ?
@TraumaTeamRacing
Жыл бұрын
This should help ⬇️⬇️⬇️ kzitem.info/news/bejne/lYto2Kxqa5uga6A
@rooim1
Жыл бұрын
Hey jusy a quick question do you intend to mount the shakers to the Rig or seat ? Got a omp seat and im not keen to attach ( drill ) them to it Was wondering where is the best place to mount if tpu want to run 4 corner speakers and one in the middle ?
@TraumaTeamRacing
Жыл бұрын
Funny enough, all that will be answered in a video I'm currently editing as we speak 👍🏻
@rooim1
Жыл бұрын
@@TraumaTeamRacing fantastic Chanel suprise i haven't seen you before already subscribed and waiting for new video's
@TraumaTeamRacing
Жыл бұрын
Thank you very much for your kind words Krzysztof! Great to have you on board💪🏻 I'll make sure I cover your questions in the video. Hopefully shouldn't be too long.
@rooim1
Жыл бұрын
@@TraumaTeamRacing perfect cannot wait 🫸🫷
@TraumaTeamRacing
Жыл бұрын
Just in case you missed it 👍🏻 ⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️ kzitem.info/news/bejne/x6Bnu22KjZ96dYo
@johnmann7o2
10 ай бұрын
Don’t buy the dayton, it becomes weak after a few weeks, aura on the other hand, still working strong after a year.
@TraumaTeamRacing
10 ай бұрын
This is interesting. How many did you have? Was it the same across all of them? Did you try running with different amplifiers etc? I have been very impressed with the Auras 👍🏻
@ji3200
10 ай бұрын
Aura used to price at $49 back in the days ago but now over $100?
@TraumaTeamRacing
10 ай бұрын
@@ji3200They are currently €59.95 🤔
@Poncheezy
7 ай бұрын
Nothing wrong with my Daytons.. had them for a year.
@TraumaTeamRacing
7 ай бұрын
@poncheezy9812 I've had a few fail and it looks like the plastic spring is a potential failing point. Glad yours are all working out well for you 👍🏻
@Mustafa_78666
8 ай бұрын
hi i got a question does it matter where i put my bass shaker on my gaming chair does it have to be in the middle or can it be on the top right or left or something will there be an imbalance???
@TraumaTeamRacing
8 ай бұрын
I will need a little more information. Post a link to what gaming chair you have please 👍🏻
@josed4110
5 ай бұрын
For a home theater these are fine or did you need more power?
@TraumaTeamRacing
5 ай бұрын
As long as the amp has 50W per channel and supports an impedance of 4ohm you should be fine.
Пікірлер: 93