You and makers muse are standing above the others and I enjoy both channels, thanks for the review.
@GilDev2
5 жыл бұрын
Don’t forget CNC Kitchen!
@melvinch
5 жыл бұрын
Incidentally both are Australians. Any reason why 3D printing is so happening on that continent compared to elsewhere ?
@larryb6759
4 жыл бұрын
I picked up an Elegoo Mars a couple of days ago. I watched many videos on resin printing so I know the things I needed to be careful of before it arrived. It is a very nice printer and I have printed upgrades for my FDM printer when it arrives. Thanks to you and other KZitem content creators for the useful information!
@Insomnii95
3 жыл бұрын
this thing was on sale for about 120$ during prime day. got a full setup (resin, goggles, gallon of IPA, container, funnel, gloves) for around 220. looks nice especially for what i payed for it.
@zensoul8335
5 жыл бұрын
I see others asking about a video reviewing the Longer 3D Orange 10 vs Elegoo Mars & Anycubic Photon. I'd like to request the same, please. I really trust the info I get from teaching tech above most other review channels, so I would love to see a video about this as well as clean up & maintenance recommendations/tips for a good setup & work area.
@Jerewie
5 жыл бұрын
+1000 for Longer 3D vs Elegoo Mars vs Photon S ! :D
@octapc
4 жыл бұрын
Ya, the Photon-S
@ttp_007
4 жыл бұрын
The Longer only uses is 854x480. While the MARS and PHOTON uses 2560×1440 2k resolution. Without a doubt you'll get better print resolution off the MARS and PHOTON.
@MrDehicka
4 жыл бұрын
Photon S clearly - resolution + more rigid Z column design.
@chriswesley594
3 жыл бұрын
Michael, as far as I am concerned you are a legend, a machine and a fantastic bloke. You've helped me a lot on my 3D printing journey, and I thank you for that. But Google's mid-roll ads, spaced every THREE MINUTES are really destroying the experience of watcihng your videos. I know making videos is a lot of work, and often thankless. I have a channel and I run ads, but not mid-roll ads. So my plea is to dump the mid-rolls. That's just my 10 cetns worth.
@Musicmaddnes
4 жыл бұрын
I find your videos the most useful out of all of the guys on here. I started watching you through the a20m bl touch. You always stress test way more than the other youtubers.
@MrDemon891
5 жыл бұрын
I have a Form 2 but it's nice to see that there are coming more and cheaper options which are maybe not quite as good but good enough :) Thank you for testing this printer. It would like to see more tests of different SLA and SLS printer. Everyone is testing standard printer but not resin printer.
@aggronn
5 жыл бұрын
Looks good, just got an ELEGOO MARS UV LCD since it was also way cheaper but didn't have time to print yet. Hope you will review more cheap resin printers
@redkingrauri3769
5 жыл бұрын
Same here. Best of luck with your prints!
@kenbessemer4913
5 жыл бұрын
I am ready to buy my first resin printer. I am choosing resin because I create jewelry and they have the resin casting wax. Could you do a side by side of the few resin printers you have with casting wax and some jewelry models like rings with prongs so we can see if the claims that these will work are real? My hope is to print a casting tree whole on the sprue so I can eliminate molds, wax injecting and treeing by hand. When you think about small links for a bracelet (10 to 20 components) being done one by one compared to this it is going to make it possible to turn out more than one finished product in a week. If you can get a model of a casting tree with several jewelry items on it that would be the ultimate. Try asking Stuller as they make the software (rhino gold) to design these items. The other software is 3-design and Matrix they may want to promote theirs as well. Could be could source for a model file.
@ydoweneedapass
5 жыл бұрын
I dont usually comment, but i have to tell you that you have too much potential, keep growing and keep doing what youre doing. cheers!
@jacobrollins37
5 жыл бұрын
Some day I will get a resin 3D print but, like you said, I need to get a safe place to use it. That is not easy with a 3 year old.
@stevesloan6775
5 жыл бұрын
Excellent video... Thanks for taking the time. I’m borderline going to buy one of these as my first 3d printer. I’ve done a good amount of carbon fibre and understand the need for skin protection and more importantly air filtration. You could do with a serious upgrade safety wise.
@Schwift3D
5 жыл бұрын
It's official every major 3d printing channel has now covered the new lcd resin printers 😂
@truantray
5 жыл бұрын
and they all look at ONE and claim it is the best.
@68HC060
5 жыл бұрын
I'd probably still go for the Anycubic Photon; it has 2K screen and is $259 (including 250ml resin and FEP film) - so $30 extra isn't much.
@manny75586
4 жыл бұрын
Thank you for this. I've been really interested in getting into 3D printing. This looks like exactly what I wanted.
@spicybeen4354
4 жыл бұрын
I would say the ender 3 is better for just getting into 3D printing but If you already have a fdm printer then that’s fine
@3DJapan
5 жыл бұрын
I just bought one of these as my first 3D printer, although I've done a lot of work with printing on Shapeways. While it is my first I've read up a lot on the safety. I plan to keep it in my garage with the garage door open when possible. And of course I'll be getting additional gloves to go along with the ones that come with it. It hasn't arrived yet so I'm excited to do an unboxing video when it does in a few days.
@johnhennessy7283
5 жыл бұрын
Hi Phil, I am looking St this printer also and where did you buy it and what resins did you get with it.
@3DJapan
5 жыл бұрын
@@johnhennessy7283 Hi John. I got mine from Amazon. It hasn't arrived yet but I see it comes with one bottle. I also bought a bottle of Anycubic grey.
@johnhennessy7283
5 жыл бұрын
@@3DJapan , You are in Australia, I am looking at getting one to get a better parts finish than my Cocoon touch ( which has been fantastic ) but looking for better finish. John Hennessy.
@johnhennessy7283
5 жыл бұрын
Hi Michael, I thoroughly enjoy all of your videos , they are easy to listen to and have all the answers . I am looking at going into resin printing and would like to see more on different products and most importantly the different resins available and what you would use them for. Thank you for your work and great videos. Regards John Hennessy.
@LinkWulluf
5 жыл бұрын
Long time no post. love the videos as always. I'm getting into D&D and am at the point where I want to start printing my own custom mini figs for myself and the others that I play with. I only have the Ender 3 (original with a few mods with help from your videos). I like the Ender 3 but I'm hoping for something with more speed and better detail at the mini size. you have a few printers now and was hoping that you might could give some advice based on your own experience with the many printers. I'm leaning between something like the Monoprice Mini Delta 3D Printer and the Longer 3D Orange 10. Could I talk you into maybe bashing off a mini fig prints of the same thing on both and giving a quick review video comparing the speed and detail at that size? I'm sure you have a full plate right now with a lot of videos planed out not even counting the ones I'm sure still need to be edited. if a video is too much. In your own opinion of the two what one do you think would be better up to the task? or is there another better option that I may not have considered ?
@jmtx.
5 жыл бұрын
Great review! I'll hold off till better chemicals come along - not a fan of messing with all this in a home environment.
@TeachingTech
5 жыл бұрын
Fair enough, it's an important consideration and not everyone has the space to set it up optimally.
@BenCos2018
5 жыл бұрын
@@TeachingTech do u know if the ender 3 upgrade board can be upgraded over USB? and if it has thermal runaway protection enabled? Thanks www.amazon.co.uk/gp/product/B07TLSSRVN/ref=ox_sc_saved_title_2?smid=A10XQE2DVH1KCY&psc=1
@kleetus92
5 жыл бұрын
You do realize that most women expose themselves to far harsher chemicals when they get their nails done in a salon, right? I mean IPA is off the shelf stuff at wal-mart, it's not like you need a Hazmat license to work with this stuff. I'm amazed at the level of fear everybody has with this. If you ever built a model with Testor's glue, or worked on a car, you've undoubtedly contacted worse material for longer than you would with this. I'm not saying this stuff is safe to eat, but you don't have to worry about getting eye cancer just looking at the bottle either.
@jmtx.
5 жыл бұрын
kleetus92 - it's the resins that are toxic.
@BrianHallmond
4 жыл бұрын
I was thinking of just doing it on a table in my backyard.
@jeans.plescha1480
5 жыл бұрын
Thanks for the review. The health aspects pretty much placed this on on the back burner for me, I am new to 3D printing just starting so yeah, not there yet.
@truantray
5 жыл бұрын
All you need to know: Anycubic photon masking screen is 2560*1440(2k)HD. This cheap knockoff is 854*480. The XY resolution for MSLA is poor for the Orange 10.
@yaminae.mohand4065
5 жыл бұрын
But said is possible to change Orange 10 LCD for the 2K LCD: LS055R1SX03. Isn't it?
@Krytern
3 жыл бұрын
@@yaminae.mohand4065 Shhhh, let the gatekeepers believe they have to spend more to get into the hobby.
@3dtwerking324
5 жыл бұрын
Good video! You may want to try to just use liquid resin as a glue to attach 2 parts then cure it in UV. The glue line if done well will fully vanish.
@cobbarne
4 жыл бұрын
I just bought one of these. I had several issues on day one and now it won't even turn on. I emailed their support team today, so let's see how they do.
@ttp_007
4 жыл бұрын
The Longer only uses is 854x480. While the MARS and PHOTON uses 2560×1440 2k resolution. Without a doubt you'll get better print resolution off the MARS and PHOTON.
@Inventorsquare
5 жыл бұрын
If increasing the off time before UV mask helps with those zebra stripes, and they are always in the same orientation, then they might be caused by the residual flow of the resin after every peel.
@kleetus92
5 жыл бұрын
I'd be willing to bet it's more a function of the surface angle of any particular print and the step size. I thought he said he was doing these at 100 micron, personally I'd have redone the one at 25 micron to see if the condition still existed.
@rubberonasphalt
3 жыл бұрын
The toxicity of printing resin is scary, and I think a lot of people are underestimating it's potential harm. You definitely need to wear organic filter mask and gloves, but also practice hospital surgery level of discipline. Which in the consumer space, I don't think people would follow. I might stay away from SLA because it also looks way too finicky, and way too unsafe. Like asbestos level of unsafe.
@novakane8722
5 жыл бұрын
Based on this I'm glad i backed the orange 30 on kickstarter
@lexgoth2005
4 жыл бұрын
Same, along with the positive review by the Printing Nerd. Have you had a chance to use the 30 yet?
@joncalmavergara3788
5 жыл бұрын
how does the Longer Orange 10 fair compared with Elegoo Mars?
@tehKaito23
5 жыл бұрын
+1 just checked amazon (germany), currently have nearly the same price
@josuerodriguez7658
4 жыл бұрын
No, i bought one cause at first it was the only one that would ship to PR but quality is not the best, i had to replace the screws on the resin tank when i removed the FEP film. after a month the screen just died and was having multiple failures before it completely died. this is the Anet 8 of resin printers not worth the money. end up buying an EPAX cause Elegoo or Photon won't ship to PR
@tehKaito23
4 жыл бұрын
@@josuerodriguez7658 that does not answer the question I think
@ShadowDrakken
5 жыл бұрын
In general, print in place articulation doesn't work on resin printers unless you have VERY loose tolerances. Resin curing bleeds out from the cure spot just enough to ruin tight tolerances.
@timester9693
3 жыл бұрын
I am thinking of getting a resin printer as a nwbie. One thing I would like to know is if this model is capable of doing lithoplanes and if so how big? Also I have seen lithoplane light boxes and would like to make those as well.
@JulianBartlett
5 жыл бұрын
Id love to see a comparison between Longer3D Orange 10 and Elegoo Mars any chance you can review that next?
@TeachingTech
5 жыл бұрын
I don't have one but feel free to request they send me one and I'll make that video.
@WhamBamSystems
5 жыл бұрын
Interested as well!
@JulianBartlett
5 жыл бұрын
@@TeachingTech I am also a youtuber but I dont have that pull with or the connections with the right people :)
@ToastmastersFCSS
5 жыл бұрын
go with the elegoo- it has a larger print volume. I do like the screen on the Longer a bit better but wouldnt trade to have a bigger build area, and the color enclosure comes fully formed not in 2 pieces like the Longer.
@rmawatson
5 жыл бұрын
be great to the photon compared along side these two as well by a single reviewer.
@davidurdahl6656
5 жыл бұрын
Can't decide between this or the elegoo.
@cobeer1768
5 жыл бұрын
I read an article talking about recycling the IPA used in the wash. Put it in a clear container and expose it to UV (sun or curing light). Then run it through a fine filter for refreshed IPA. Does that sound functional or would dumping and using new IPA be better?
@TeachingTech
5 жыл бұрын
I think that would work. I assume the uncured resin hardens and then you strain it out? As you saw in my cleaning tank, I have plenty to test this on.
@cobeer1768
5 жыл бұрын
@@TeachingTech Thats how I read it. Cure and filter sounds great on paper but Im not sure how it would work if the resin is in solution. Im not sure how fine of a filter would be needed. If it combines to make larger clumps that would be ideal but what if it hardens and makes an IPA slurry that requires a micron filter? Your blue soup is what made me think of it. Lol. If you try it and it works, let us know!
@jasonbenyeda1476
5 жыл бұрын
You can totally recycle the IPA for a good long time.
@cobeer1768
5 жыл бұрын
@@jasonbenyeda1476 Thank you! Does it clump up in IPA or is it more of a slurry?
@brezovprut4431
5 жыл бұрын
Longer Orange 10 vs Anycubic Photon ?
@5punkybob
5 жыл бұрын
The photon is better because of the screen resolution is much higher so you get a more accurate image projection
@toms.3977
5 жыл бұрын
Checked Amazon...no longer available. That was my only option. Loved the video but it only made me fall in love with something I'll never own.
@truantray
5 жыл бұрын
Anycubic Phpton is better.
@capsyzeable8790
5 жыл бұрын
If you consider the current exchange rate, the Orange is $339AUD plus delivery... Aliexpress is $365 delivered (with no Australian warranty or support).... Not exactly the "budget" 3D printer it's being promoted as. At that price the Orange Longer is up there with the Anycubic Photon through an Australian reseller (which comes with Australian warranty and support)... Kinda made the decision easy as hell.
@Ones2Cents
4 жыл бұрын
Tom S. They are back on amazon for 200 dollars
@BarringtonDailey
5 жыл бұрын
Can you at least prime and put a wash on the miniatures. Looking at those blanks we've no idea whether those miniatures are any good or not. Cheers.
@promountaincoffee
4 жыл бұрын
What resin you use?, I'm interested on use flex polyurethane can I use on this device? or wich one I have to buy, THANKS!!
@AlbertoMartinez765
4 жыл бұрын
This thing is down to $179 on amazon ! ( since the Newer Longer 30 came out, has 2K resolution and a slightly bigger print size and angled plate but cost 100 bucks more)
@DocsPropShop
4 жыл бұрын
Link?
@DJalin1
4 жыл бұрын
Any change of a fan upgrade video. I noticed a 3d printed fan update for the bottom of the printer but there were no introductions with it. The original fan is loud.
@car5on777
5 жыл бұрын
Michael, Thank you for the great content! Would you be willing to review a budget 3D Printer with Dual hotend/nozzle? Or maybe even a mod for the Geetech A10M to add dual hotend/nozzle capability? Thanks!!
@blackwolfecc
5 жыл бұрын
Whelp... I’ve been looking for an excuse to get a resin printer. I WAS going to get the anycubic photon, but @ $408 I couldn’t convince the wife. At just over $200.. I honk this is the one! Thank you for such a good review!!!!
@capsyzeable8790
5 жыл бұрын
In Australia the Orange Longer isn't stocked locally, can't be ordered via Amazon (due to their stupid restrictions), and only available via Aliexpress/Alibaba (so no local warranty or service support)... Add the local exchange rate and the price is up there with the Anycubic Photon (which is available in Australia from local resellers with warranty and support)... Sure, may be "budget" to everyone living in continental America, but for those living in Australia it's not the budget printer that it's being promoted as.
@blackwolfecc
5 жыл бұрын
Cap Syzeable wow that’s ridiculous. I’ve known prices were higher in Australia but didn’t think it was that high. I wound up getting the standard Photon and it’s been fun so far.
@capsyzeable8790
5 жыл бұрын
@@blackwolfecc ... Yeah, I was excited when I saw the reviews of the Orange, especially at the price point that was being displayed around the net... I've heard a lot of things about the Photon and seems to be the way to go.. What's the long term reliability of it been like? Any issues?
@blackwolfecc
5 жыл бұрын
Cap Syzeable I’ve had one failed print so far and it was my own fault. I’ve already gone through the 500ml bottle of green that came with it and am pretty impressed. The Anycubic community is pretty good and replacement parts are abundant and fairly cheap. But, unfortunately, I’m speaking from the states. Cleaning has been the only tedious process. I built out a section of my garage specifically to house this and any other resin printers I might get. Blocked off and ventilated with work space for a cleaning process. Resin on a special self, sonic cleaner, couple alcohol baths, and all the tips needed for cleaning. I’m super cautious about the material. Another machine that’s been doing well is the Elegoo Mars. Was for sale for $250 state aide beginning of July, and sold out super quick. I haven’t seen it back in stock yet. Same with the Orange. I’m planning on picking up both as soon as they are in stock and comparing them to the photo . Would eventually like a Photon s, but that’s more for convenience.
@altar7885
4 жыл бұрын
Thanks for the video. How long did the printing take?
@elfpimp1
5 жыл бұрын
You should consider getting a hazmat locker or making one of your own.
@LT72884
2 жыл бұрын
I have this printer, and stopped using it because nothing every sticks to the build plate.. bad resin? Wrong type of resin? What else could it be? Thanks
@hugoarguelles2202
4 жыл бұрын
Hello! Do you think this 3D Printer could be used for dental purposes? Such as prothesis like crowns and bridges? And by the way, do you know about a 3D scanner that might be useful for the same purposes? I know there is dental printers and scanners but they are super expensive. I love your videos!
@5punkybob
5 жыл бұрын
All it needs is a 2k screen upgrade and it would be mint
@robertsecor5738
3 жыл бұрын
Have you updated the firmware? I did and no fan now. It has the 2 pin plus 1 blue pin and requires firmware D revision, but once applied the fan will not power on. :(
@jasonbenyeda1476
5 жыл бұрын
The slicer for this printer seems amazingly good. What is the file format? Can Chitubox or Prusa slicer be used as an alternative?
@shadow7037932
5 жыл бұрын
Looks like it only supports their slicing software.
@nottingham82
5 жыл бұрын
This price war is great. Just got a photon used for $200.
@duke1252
4 жыл бұрын
I just bought my Longer 10, my only question is, have you had any success with using other branded resins and have any suggestions on printing with other 'recipes'?
@dibblethwaite
5 жыл бұрын
It's a bit misleading to say it t works exactly the same as a moai. In the time lapse, the tilting bed on the moai is really obvious. That's a really important difference. You'll get more failures without it.
@mattiash8187
3 жыл бұрын
Where can I download that bulb vase thing with diamond texture? You call it a bassi or something like that. There isnt a link for this one in the video description. It looks really nice and i cant find it even i searched quite much on net.
@Mario29615
5 жыл бұрын
I've seen that you review this products quite often and when are recently available but how much time does they work after failure? How many prints until dying? The warranty will cover?
@TeachingTech
5 жыл бұрын
I have to strike a balance between using them for long enough to understand the workflow and issues and actually making a video. I typically have a printer for about a month before I release the video. If anything significant happens after that I'll update the original video.
@Mario29615
5 жыл бұрын
@@TeachingTech thank you so much. I'll be watching for some news
@jasonbenyeda1476
5 жыл бұрын
The LCD and UV source on every resin printer I own is considered a consumable by the vendor. Unless it fails within a VERY short period, you have to replace at your own cost. Both of these are good for several 1000 hours usually. If you are using these printers in a production environment, you will want to keep a LCD, UV source, build plate and 2 vats as a minimum spares kit. The vats are critical because if you have a failed print, you can just swap in a new vat and start a another print. Cleaning adhered resin from the bottom of the FEP takes some time.
@Mario29615
5 жыл бұрын
@@jasonbenyeda1476 wow Jason, thanks for the advice I didn't know that.
@janwiersma1449
5 жыл бұрын
hi Michael. did you use Chitubox yet? i have got the alfawise w10 which is internally and actually externally eccept for the color of the acryllic hood eccactly the same printer, it even comes with 250ml longer resin. and the files has the .lgs extension. now my problem. i had an object which could not been sliced with the propietary slicer. holes turned into massive in the next layer and object get screwed in every way. yes it's a difficult object i guess. but Chitubox can handle it. but there isn't a real profile for the longer in chitubox. when i make a default profile based on for instance the sparkmaker it gets the extension .wow how can i get it working on the longer/alfawise? any suggestions? great vid.
@rodsprague369
3 жыл бұрын
Are there good reviews of the software used to design things from scratch? I am horrible at wrote memorization, so I need a very logical environment that does not turn learning the functionality into an Easter egg hunt through pulldowns within pulldowns, like with MacroShaft products.
@ZakuNuva
5 жыл бұрын
I don't get why people are looking at this and not the Elegoo Mars. Great printer and is $250 right now with a 2k display.
@truantray
5 жыл бұрын
because KZitemrs are getting this shipped to them to try. Don't go by the annoying clickbait title of "best" -he only tried one.
@3DPrintingNerd
5 жыл бұрын
I have this and the Elegoo Mars coming to me. The Orange 10 arrived first, so it's video came out first. I'll have a video on the Elegoo Mars once it's arrived and I've gotten some use on it.
@ZakuNuva
5 жыл бұрын
@@3DPrintingNerd I got mine yesterday, too me a few tries to get a good print, turned out you REALLY need to tighten the build plate set screws. Use a quality hex key as to not strip anything. I've had some of the best prints ever out of it a though some issues with adhesion but that's probably my fault with lack of support structure and experience with msla
@MooseWithAnAxe
4 жыл бұрын
I have attempted to print 3 different miniatures on my Longer 10 (which is quite time consuming, considering you cant see a failure until roughly 2 hours in, along with then having to take an extra 20-30 minutes after to clean up the failure and reassemble everything). The failures seem to be coming from the fact the the supports put in by the software (much like shown in this video) are placed under the base of the miniature. Each time I attempt a print the supports under the base come out fine but it seems like they fail and the base (and everything after it) fall and end up as a solid mess on the base of the resin pool. Would you have any suggestions for dealing with this issue? I'm preparing to shelve my attempts at Resin/SLA printing given these failures and just stick to using FFF/FDM style, but I really want the fine detail that comes from SLA.
@drolsisusej100
4 жыл бұрын
we have a spare bathroom , would running the printer in the bathroom with the vent fan on be safe enough for fumes ?
@howiebaird5511
4 жыл бұрын
right on dude you reviewed it
@a1crosenberger
5 жыл бұрын
What if you take two color resins that are similar to the uv curing time and pour them together in the vat? Could you get a marble effect?
@TeachingTech
5 жыл бұрын
I think yes, but the effect will fade as they get mixed during the print by all of the churning.
@hatchbackhound
5 жыл бұрын
Got my unit about 3 weeks ago, already out of resin.. how long till we see some upgrade videos.. I'm thinking that fan could be loads more quiet.
@BrianHallmond
4 жыл бұрын
How many prints did you get done before you ran out of resin. Were you happy with the quantity?
@0xCAFEF00D
5 жыл бұрын
I'm really tempted.
@shadow7037932
5 жыл бұрын
Any chance you can review the BEAM3D Prism? From my understanding the Orange 10 uses a proprietary slicer where as the Prism is more open and supports multiple slicers (Slic3r, Chitubox,etc). As you know, well maintained software makes a good bit of difference in print quality/ease of printing. Plus the Prism has auto leveling and would like to see how good that is.
@reluttr2
5 жыл бұрын
the Prism uses the same auto leveling system as the Monoprice MP Mini SLA.
@elfpimp1
5 жыл бұрын
Wow. The detail!!
@DisgruntledPigumon
5 жыл бұрын
So. Elegoo Mars or Longer Orange?
@josuerodriguez7658
4 жыл бұрын
Elegoo any day! Orange is not worth the money...
@mrclown7469
5 жыл бұрын
That CR10Max sure did make a mess of your desk 😆
@luisdominguez4307
4 жыл бұрын
Can you grab any 3d printer file and use it with this maquine????
@Steger13
4 жыл бұрын
Hi, is this printer good for making head sculpt and figurines of 1/6 scal or 1/12 and 1/4 scales? Or you have an other one in mind? Thx
@i_hate_google_
3 жыл бұрын
There are 100 or so $ printers on aliexpress... Any oppinions?
@markgiles8527
5 жыл бұрын
Amazing details! Stronger in all Axis than FDM so I’ve heard, which could be useful. Nice one.
@Matthew-jv1ee
5 жыл бұрын
Great review mic..only problem i have with these cheap lcd printers is the lcd...how long will this lcd last...and how easy is it to get parts...the lcd would be the major cost in one of these units....open it up and chq what stepper they are using for z axis...thanks mic
@TeachingTech
5 жыл бұрын
Something like the Wanho D7 has plenty of spares now, it remains to be seen whether the new generation of resin printers will receive the same support.
@jonathonhoogland9446
5 жыл бұрын
Matthew 1973 they are all likely using mass produced phone panels so the part cost is actually extremely low.
@spikekent
5 жыл бұрын
Great review Michael. This is a very affordable entrance to resin printing. Not for me though, I'm more than happy with FDM. Have a great vacation/holiday with the family.
@truantray
5 жыл бұрын
once you try a small detailed print with MSLA, you will never go back to FDM.
@spikekent
5 жыл бұрын
@@truantray you could be right, but for me there is far too much mess with resins and FDM is perfect for the things I use it for
@whatimintonow8608
4 жыл бұрын
Just wondering have you checked out the longer orange 30?
@quantumenergysolutions9128
4 жыл бұрын
Thanks, Do different property resins exist? eg, harder,softer,flexible,impact resistant? Cheers!
@mrfordf3508
5 жыл бұрын
How is the speed with the LCD vs the laser of the Peopoly? Can you print identical items and publish the print time? From what I have read, LCD type resin printers need a different type of resin than the SLA printers. Is that correct?
@charleslao3798
5 жыл бұрын
Yes, LCD resin is different from a SLA printer resin
@robertbobrichard
5 жыл бұрын
Anyone else having trouble with the bundled software? Can I use a different slicer?
@hatchbackhound
5 жыл бұрын
Chitubox just released a saving option for .IGS. so we can now use it in the sted of longers slicer,witch is crap
@MrDownRater
5 жыл бұрын
so the question is: Elegoo Mars or Longer 3D Orange 10?
@davidurdahl6656
5 жыл бұрын
Right? Im leaning towards Mars,if it's still on sale when I have the extra dough.
@MrCcfly
5 жыл бұрын
@@davidurdahl6656 i think anycubic photon is in that same price range
@davidurdahl6656
5 жыл бұрын
Photon is almost twice as much. I know they are more tested and approved, but idk if I wanna spend that on something I won't use near as much as my fdm printers.
@MrCcfly
5 жыл бұрын
@@davidurdahl6656 230 vs 250 $ not that much different
@MrCcfly
5 жыл бұрын
photon is 250 $ so these don't seem to have logic to buy it ,but it's your $
@gregp.5064
4 жыл бұрын
is blue cast neccessary or could you do jewelery with normal resin?
@johndoe528
4 жыл бұрын
7:02 "filament"
@OwenWithAHammer
5 жыл бұрын
Check out the Anet N7 next pls, it's a 300mm build height resin printer for $1500, I want to get it but there's no reviews anywhere.
@astro7996
5 жыл бұрын
Thanks for the great video once again!
@maidenjump
5 жыл бұрын
How about Vat and clear film attached? For how long do they last? Please provide information..
@TeachingTech
5 жыл бұрын
The vat will last forever, the FEP film in my experience on two other similar machines lasts until you scratch the surface by accident. FEP film is cheap and you can buy FEP intended for another printer. Generally the sheet comes oversize and is trimmed down with a blade after being clamped into the VAT. Worst part is having to clean out the old resin from the VAT first.
@maidenjump
5 жыл бұрын
@@TeachingTech thanks for reply, and for this video
@maidenjump
5 жыл бұрын
@@TeachingTech forgot to ask,.. where it will stand against wanhao D7?
@jasonbenyeda1476
5 жыл бұрын
The FEP film will eventually wear out due to UV damage. It is many hundreds of hours. You are more likely to damage it with a failed print or cleaning before that.
@multiaxismachines538
4 жыл бұрын
Man this is so cool
@talonabuser1072
4 жыл бұрын
What’s the community support for this like?
@RahmatHidayat-ul6qg
4 жыл бұрын
If we buy this machine. We have sofwere to.? Thanks
@teabagNBG
4 жыл бұрын
the baby figure is really dope where can i find the file? thx
@Knightridermsn
Жыл бұрын
Do you need supports?
@jamesmoe
5 жыл бұрын
I am wondering why they are sending out review units of the Longer 10 when they just wrapped their Longer 30 Kickstarter that will ship shortly
@MrCcfly
5 жыл бұрын
is that 30 new same kinda model like this or bigger ?
@jonathonhoogland9446
5 жыл бұрын
MrCcfly Bigger. Roughly the same as Prusa SL1, but no tilting bed and roughly half the printing speed.
@charleslao3798
5 жыл бұрын
@@MrCcfly 30 has a 2K LCD screen. Higher resolution.
@james10739
4 жыл бұрын
What is the cost difference between fdm and resin
@bricegordon64
3 жыл бұрын
Tried 2 different machines. Both had horrible z wobble, the print size is about 5mm short on each side, same price as a mars 2 mono. These are cheap for a reason. Zero help from support either. Seriously, any printer is better than this, but monos are the way to go. Nova 3d proxima is a good option for budget
@avejst
5 жыл бұрын
Impressive prints Thanks for sharing 👍😀
@praveenraikar567
3 жыл бұрын
How to print our own picture design....
@stevelaminack1516
5 жыл бұрын
7:03 ...Filament :-)
@raunchyNO
5 жыл бұрын
think he meant resin...... didn't say resin though :)
@TeachingTech
5 жыл бұрын
Yep, meant to be resin. I think another time in the video I referred to the SD card as the LCD. I get tongue tied a lot, it's amazing that I ever end up with a final video.
@mode1charlie170
5 жыл бұрын
Oh what a surprise....no longer available on amazon.
@BrianHallmond
4 жыл бұрын
How long does it take to print something like the Trex head?
@stevesloan6775
5 жыл бұрын
You know, seeing a few adds(4 second skip) in your uploads is surprisingly okay 👌 Bang for fn bucks! 🇦🇺🤜🏼🤛🏼🤓🍀🍀🍀
@yanivginlevy
5 жыл бұрын
ahhhh where are my usual ender3 pro upgrade show :)
@octapc
4 жыл бұрын
It's also available on Banggood
@billrex
4 жыл бұрын
That sounds like an explicit website.
@poman911
4 жыл бұрын
These resin printers have a hidden defect: the LCD display under the resin tank gets damaged by the UV light. Get on the FB group of the Phrozen and other printers and you will see problems after problems with the LCD screen. This type of printer isn't ready for reliable yet. I'm going back to FDM.
@tinplategeek1058
4 жыл бұрын
Hardly hidden as it is mentioned in the video. The LCD screen under the resin tank is a consumable item and will need to be replaced.
@poman911
4 жыл бұрын
@@tinplategeek1058 well it was failing because there is no tempered glass between the FEP screen and the LCD screen. Any pressure from the build plate on to the FEP screen will be applied to the LCD screen. In less than 40 hours of printing, I had two failed LCD screens. The fix was to mount a tempered glass screen protector between the LCD screen and the FEP screen on the basin's bottom. There is a downside to this in that the focus point is slightly off due to the thickness of the screen protector. I can live with that loss in resolution now that the screen is reliable even after 100 hours of print.
@tinplategeek1058
4 жыл бұрын
@@poman911 I agree with you that it shouldn't fail fast. 2 screens in 40 hours is ridiculous. You would hope for a thousand hours plus of printing per screen. Glad you found a work around.
@Moctop
5 жыл бұрын
Longer3d Orange 10, Elegoo mars, or Anycubic Photon?
@lukeolson8224
5 жыл бұрын
Moctop I am wondering the same thing!
@zensoul8335
5 жыл бұрын
Me as well. I really trust the info I get from teaching tech above most other review channels, so I would love to see a video about this as well as clean up & maintenance recommendations.
Пікірлер: 281