hello man. I love your video. I have a 620 Datsun 1978 here in Tennessee. Not sure if you are interested in buying it for renovation. I can send you some pictures. My dad would love to restore but he doesn't have the time nor the energy anymore. Thanks!
@novakenss
4 ай бұрын
I have a '72 Z and I've got it restored and updated all around, except the suspension. I only have lowering coils and want coil overs and T3 components front and rear. What you have produced here is one of or even the best I've seen for doing all this work. Your mechanical pointers are precise, and your methods show a home shop mechanic can do most everything. Huge thanks for your work doing this video. I can't wait to watch more.
@windows_down_
4 ай бұрын
Appreciate it! Lots more to do, best of luck with the build
@kasmiester8
4 ай бұрын
Idk why I'm watching this. I'm going to go with the invincible super 8.8 kit or the apex 8.8 kit. But was definitely a nice video to watch and learn
@kaybevang536
Күн бұрын
You think 370z diff will work for L series ?
@JoseAntunes-pp6xs
11 күн бұрын
damn..i wish i had watched this before i bought my AE kit... fml At least other people will :)
@AnthonyCessor
7 ай бұрын
Fantastic video and fantastic work. Love how clean the rear end looks now. Also pretty helpful video as I will be doing a full rear end build later this year.
@windows_down_
7 ай бұрын
Thanks man, love how it went together. Can't wait to get it on the road
@devinsparks1523
2 ай бұрын
What did you spray your undercarriage with?
@windows_down_
2 ай бұрын
It's raptor liner. Ive got a video on it :)
@MrDprada01
5 ай бұрын
Great video! I’m glad I found your build. Like you, I was hesitant to go with the APEX rear end for my VQ37VHR build. I am using the front subframe and there’s a lot of good features but it seems to missing the mark on some points. I think I will be going this route with the R180! I’m looking forward to seeing your swap!!
@windows_down_
5 ай бұрын
Thanks man, vq37 swap sounds like a blast too! I'm sure the STi diff will be solid
@BlackwaterDSM
3 ай бұрын
What are the issues with the Apex stuff? I was about to purchase the front and rear “Track Attack” kit, and after seeing the issues he had here, I changed my tune a bit. Possibly gonna go with T3 stuff instead, but they do NOT make a front subframe or any products for an LS swap like I’m doing. 🫤
@matthewpeterson4305
24 күн бұрын
@BlackwaterDSM did you end up going with apex?
@BlackwaterDSM
24 күн бұрын
@@matthewpeterson4305No, I’m going with an IE setup with Super 8.8 and Mustang front suspension setup. This uses all the same components as a 2015/2016 Mustang, so everything is pennies on the dollar with a much wider range of wheel/hub and BIG brake kits availability. Just know, you’ll probably need to run 18’s to clear most brake setups, which also usually requires fender trimming. Not to mention, it is it’s a one man show, so fab time can take a minute.
@donwest5387
3 ай бұрын
to remove stub-axle nut; use cape chisel
@jahritaha607
Ай бұрын
More more more talking
@Thearc
5 ай бұрын
Crazy video ! Everything is well explained, straight to the point !! Loved it keep going !
@windows_down_
5 ай бұрын
Appreciate the support
@p7x
6 ай бұрын
Great video! Just put my 280 rear end back together and learned a few things.
@windows_down_
6 ай бұрын
Thanks, so many little things on this rear end
@tetrist8953
7 ай бұрын
Awesome! Really nice seeing it slowly come together! Excited for the next video 👍🏻👍🏻
@windows_down_
7 ай бұрын
Thanks man!
@76S30
5 ай бұрын
Excellent video, I learned some stuff :-) I have a 76Z with a lot of those parts already. I still have an open diff though. I have T3 coil-overs and I am pretty sure they have a kit that would bolt right in..I wish you were my neighbor lol
@Hanmieson
Ай бұрын
Mitutoyo👌
@jamesbusk8571
7 ай бұрын
love it bro keep going
@JustAnotherAsianGuy2
6 ай бұрын
looks pretty good
@pragmatist911
6 ай бұрын
Would you ever consider doing this to a 944 Porsche for a commission?
@windows_down_
6 ай бұрын
Possibly, message me on Instagram @windows_down_
@pragmatist911
6 ай бұрын
Somehow I've been banned from Instagram. Any ideas?
@pragmatist911
6 ай бұрын
@@windows_down_ I just reached out and was told this email wasn't you.
@ZachSmith-gm4sq
7 ай бұрын
Can you use those stub axles for a 5 stud wheel too or is it just 4? Seemed like with the holes on it, you can use it for both
@windows_down_
7 ай бұрын
Yup, they sell it as either 4 or 5 stud. Both are drilled out, but they press in the studs based on what you order. They also have normal length or extended studs
@ZachSmith-gm4sq
7 ай бұрын
@@windows_down_ thank you sir, doing this to mine as well! I want to do 5 lug for wheel choice LOL
@windows_down_
7 ай бұрын
Nice! Def a good idea of going bigger wheels too
@p__jay
5 ай бұрын
great video! too bad I am not allowed to use most of those parts...
Пікірлер: 40