Gotta love this company, always coming up with something new.👍
@KegLand
3 жыл бұрын
Thanks Simon. Really appreciate the feedback!
@Grilk
2 жыл бұрын
Yeah, they are awesome
@jimlewis7938
2 жыл бұрын
Just received 2 of these. Without the oring between the shank and tap. They do not seal. To confirm this was the issue, I pulled the oring from my standard Nukatap and they seal fine with the additional flow control parts. Think you need more engineering work. Also even with 10' of beer line. They create extreme amounts of foam in any position except full open. Since the seller cant be reached, I will ve returning both tomorrow for the standard type.
@KegLand
2 жыл бұрын
Hello Jim. This tap has been designed to seal with the tap shank directly onto the hard POK plastic flow restrictor device. The o-ring is not really a good idea. If you do the colllet up tight it should seal. As it's a hard plastic the shank face needs to be in good condition to seal against the hard plastic. Sometimes if the shank has been thrown around against other metal parts the face can get a little dent. If this is the case the shank needs to be replaced. The reason we use the hard plastic seal is because it's necessary for this design to work as it means we have tight tolerance with the flow restrictor device and the tap body. If we use a soft o-ring we cannot account for the "squish" in the o-ring.
@l_b-man
Жыл бұрын
I think Jim is referring to the seal which is sitting in a recess on the shank under the collar. Without this, they do not seal. KL22859 (Ball Lock Disconnect with Integrated Tap Shank and Collar) has it, KL03247 (Stainless MFL Tap Shank Adaptor) has it - they seal just fine. My two KL11945 (Nukatap stainless long shank) came without this seal - shurely enough they leak. Swapt the seals over from KL22859 & KL03247 and violà! they don't leak anymore!
@MrDrz250
Жыл бұрын
Brilliant work Keith i love your videos
@KegLand
Жыл бұрын
No worries. It's a pleasure. It's "Kee" by the way not Keith.
@l_b-man
Жыл бұрын
Two leaking Nukataps FC's on 100mm stainless Nukatap long shank(KL11945) say the POK flow restrictor doesn't seal enough. Screw them as hard as you like - it does not help. No problem on the KL22859 (Ball Lock Disconnect with Integrated Tap Shank and Collar) and KL03247 (Stainless MFL Tap Shank Adaptor) because they come with a seal which sits in a recess on the back of the shank. Swap these seals to the 100mm stainless Nukatap long shank which came without them - surely enough they now seal just fine. I do wonder, however, why the flow restrictor has been designed with a relatively thin sealing face and these protruding tips. I had signs of flashing around these tips on both my Nuka FCs which indicate problems with the mould and might be the part of the reason why they are leaking on the Nukatap long shank without the seal. But since I can't change the design of the flow restrictor, the back seal is the way to go.
@cameronbeare8086
Жыл бұрын
How’s the flow control functionality?
@l_b-man
Жыл бұрын
@@cameronbeare8086 Flow control is working nicely - from almost no flow to full flow. It is quite easy to disassemble and clean. What I would recommend is to get a bunch of food grade silicone seals (Outer Dia. x Inner Dia. ): 16mm x 14mm / 1mm Cross-Section. This is the seal for the FC mechanism and that was so far the only one to wear out relatively quickly.
@KegLand
Жыл бұрын
The only time we have seen issues with the Nuka FC not sealing on the shanks is when the shanks are slightly dented. The Nukatap FC should seal very reliable with the POK directly on the smooth machined face of the shank. The only issue is that because we use a hard POK material if the stainless shank is dropped or even has a small dent on the face it prevents a good seal from taking place. It's possible to use emery paper and polish the face sealing surface and this will fix the issue too or adding a silicon seal but when the POK seals directly on the stainless this is the most reliable seal and it's also got the least oxygen transmission too(compared with silicone).
@PortlyGentleman
3 жыл бұрын
Those look pretty damn good, hopefully a vast improvement over the Intertap 🍻
@KegLand
3 жыл бұрын
With respect to producing foam they are miles better than the Intertap and other forward sealing FC taps.
@PortlyGentleman
3 жыл бұрын
@@KegLand let's hope they make it to California Sooner than later .
@Holdmuhbeer
3 жыл бұрын
I searched everywhere for them, every us company seems to be out of stock. Was able to order them from Germany, though. Really looking forward to their arrival so I can get my keezer build going.
@dbehr27
3 жыл бұрын
Uh, did I miss something? When he poured the beer at the end the tap didn't spring back. Uh.... UPDATE: Ahh, I get it. The title confused me. At first, that's all I saw plus verbally, he said "it's the only one with a spring return". I see in the description the spring return is described as an option. And let me add something. I almost bought an Edgestar or similar keg and thank goodness I found Kegland. It's like having your good friends who are amazing engineers make beer stuff for you, but who aren't looking to just get rich. I think Beermeister is comparable in quality but at almost double the price.
@bonedrykneecaps
3 жыл бұрын
I think you need to buy the auto close spring separately and pop it in
@smokychard7938
3 жыл бұрын
Yeah i was expecting to see the tap flick back automatically he must have removed it for the test
@michaelweel2920
2 жыл бұрын
After watching this nice adverstising here, I bought a Nukatap Set-up for my mini keg (Nukatap direktly on tank shank adapter, connected diretky to the Disconnect on the keg). Now I have a lot of problems to tap my beer, only foams comes out of the tap. Even at nearly closed FC. Some homebrewers, using the nukatap, advice to go for a pressure of 3-4 PSI. Now this is not what I want. my beer is carbonised at "normal" pressure at "normal dringin temperatur", so let's say 15 - 20 PSI. (1-1,5 bar). I hope Kegland reads my comment and can tell me for what pressure the tap is designed for?
@KegLand
2 жыл бұрын
If you are using good quality taps that are correctly assembled then 90% of the time it's an issue with the temperature. To pour a beer with little foam you should aim for beer temp of 2-3C. Can you pour a beer into the glass then put a thermometer into the beer and check the temperature. I would be guessing your beer is not in this temperature range.
@michaelweel2920
2 жыл бұрын
@@KegLand Hi Kegland, thank you for your answer. Surely I am not pouring beer at this low temperature. I want to drink it, not freeze my mouth. And I like to taste the flavors in my beer. Anyway, my temperature in the Keg is close to 6 °C. Even too low for drinking, but is will slightly get warmer once in my glass. With you answer you say indirectly that I need lower pressure. With "old fashioned" tap I really have no problem with foam. In my opinion this is a problem of the small design. I really like your products but I am disappointed from this Nukatap.
@KegLand
2 жыл бұрын
@@michaelweel2920 Hello Michael. We rate all our commercial taps with a spout that is 10mm ID and to fill this spout correctly the beer should be flowing at about 300-450ml per 10sec. You simply will get a lot of foam if you are going to serve beer at above 4C. If you like to drink beer at 6C you will find if you use a warm glass your 3C beer will end up being 6C in about 20-60 seconds anyway. In addition to this your beer will store better and stay fresher for longer if you store at a lower temperature. So storing your beer colder will simply improve the quality of your beer and extend the shelf life. You can easily use this tap with 15-20psi and in this instance we would recommend also using about 1-1.5meters of 4mm ID beer line. This way your line will take up half your pressure and the other half would be adjustable with the flow control device.
@JonMead1988
Жыл бұрын
Hey folks! What serving pressure would you recommend when dispensing direct from keg (or short length of 3/8inch tube to a shank) using the FC tap? Cheers!
@dburrows1480
2 жыл бұрын
Do you plan on coming out with stealth bomber black flow control tap?
@leojames7223
3 жыл бұрын
I have one of your Kegerators and I was wondering if I change the taps to these can I use a shorter line instead of having to have 2 metres or so of line that takes up so much space and is a real pain
@KegLand
3 жыл бұрын
Yes you can use shorter beer line if you choose to use the Nukatap FC taps.
@chrislombardo9142
3 жыл бұрын
I preordered this about 9 months ago and they haven't shipped yet. @Kegland, do you have an estimate when these might ship?
@joelmagnuson
3 жыл бұрын
Just got an email today from MoreBeer in the USA that they will no longer sell it due to a patent issue with Perlick.
@chrislombardo9142
3 жыл бұрын
@@joelmagnuson Thanks for the quick reply. Do you know which vendors will sell them in the US?
@joelmagnuson
3 жыл бұрын
@@chrislombardo9142 My guess is none (or at least none until 2031 when Perlick's patent expires).
@KegLand
3 жыл бұрын
Hi Chris, best to get in touch with the wholesaler you have ordered with.
@KieranShort
3 жыл бұрын
Might be time to upgrade the perlicks
@KegLand
3 жыл бұрын
For sure Kieran! I can't believe you are still using Perlick. Let us hook you up with the new Nukataps.
@djdownie3
2 жыл бұрын
Hi I couldn’t see the sleeve in my box. Do more recent versions not have one?
@KegLand
2 жыл бұрын
Can you send a photo to our customer service team. It's possible that you might be missing something but best to send a photo so we can check.
@geffthebricky
3 жыл бұрын
Hello I have Just purchased one of these taps but have yet to fit it. I also have 2 Intertap faucets. Could you please tell me, are the new bushings compatible with the intertap faucets ? The reason I ask, I have never been able to get the spring back function to perform properly - too slack and they leek - too tight and they wont spring back. Am I doing something wrong? as other people don't seem to have this problem. Any advice would be much appreciated. Thanks Geoff. UK.
@KegLand
3 жыл бұрын
The shanks we produce will work with both NukaTap and Intertap Faucets. We also sell auto close springs for the Nukataps.
@timothydietz
2 жыл бұрын
The shanks I have are angled from the sealing face to the ID...it looks like a cone/funnel, not a cup like intertap shanks. With the intertap FC, 'wide open' actually chokes flow because the shuttle presses into the cone of the shank. Will I have that problem with these too? Do I need intertap, cup style shanks?
@KegLand
2 жыл бұрын
No. These work in a completely different way. These move the outter sleeve back and forth (the female piece). These are really a better design than the older intertap FC.
@matthewbaxter6125
3 жыл бұрын
Just placed my new tap on my keg and it will not seal. It is leaking through the holes on the collar that screws the tap and shank together. I have removed and retughtened several times. Any advise?
@KegLand
3 жыл бұрын
It's most likely that your shank as a small dent in the face where it seals. It can be solved by using an o-ring and out customer service guys can send one out to you. With that said if the shank face is machined well and it is free of dents then this seal is not generally necessary and the hard plastic will seal directly onto the shank.
@KegLand
2 жыл бұрын
You can put in an o-ring but it really should not be necessary and as long as the face of the tap shank is smooth it should seal. Many retailers have shank stacked naked in a bin and if they knock against each other the face of the shank can get a small ding and cause it to leak. Firm tightness with the tap tool is also required for the tap collet.
@Darknessfury
3 жыл бұрын
Do you need the intertap shanks to utilize the auto shutoff spring? Will these fit on normal shanks with/without the spring?
@KegLand
3 жыл бұрын
No, the good thing about this new design is you can use any standard shank. As the tap spring is held captive within the tap body it doesn't rely on the cavity in the shank to accommodate the spring and can therefore be used with any shank you like.
@gumbiotch
2 жыл бұрын
How do you contact the manufacturer for issues with the NukaTap?
@KegLand
2 жыл бұрын
Normally go to the retailer as a first point of call.
@monogramadikt5971
3 жыл бұрын
the pics on the website dont show a handle with the unit ? does that have to be brought separately or something ?
@KegLand
3 жыл бұрын
@@TyinAlaska Yes we sell all the tap handles separately to give the customers more choice with tap handles.
@matth2988
3 жыл бұрын
Are the compatible with klock?
@KegLand
3 жыл бұрын
Yes absolutely. You just need this part: www.kegland.com.au/k-lok-male-x-tap-shank-adaptor.html
@benmullins8971
3 жыл бұрын
Any news of date for these in the black matte stealth bomber please?
@KegLand
3 жыл бұрын
Best to check the website for the most accurate ETAs.
@austinpowers6556
3 жыл бұрын
After the first disassembly of my nukatap the sealing of the flow control sleeve broke. Can you guys tell me which size it is, so that I can get a new sealing?
@KegLand
3 жыл бұрын
Do you mean the o-ring broke. We have seen this before and to be honest the tap will still work fine without this o-ring. It's quite unusual for the actual sleeve to break. I have not heard of that before. Can you please email us a photo so we can give you more accurate advice.
@austinpowers6556
3 жыл бұрын
@@KegLand Yes, I am talking about the o ring. Apart from that, I am very pleased with the nukatap.
@KegLand
3 жыл бұрын
@@austinpowers6556 You can get a seal kit here: www.kegland.com.au/seal-kit-nukatap-ss-fc.html With that said you can just remove this o-ring and the tap works exactly the same. We have been considering to change to a smaller o-ring as the current one just has slightly too much friction and can get chopped when the sleeve is forced into the bore of the tap as you have done.
@rhysdejager
3 жыл бұрын
When will the replacement red bushings be available?
@KegLand
3 жыл бұрын
Get in touch with us for help getting any replacements by emailing beer@kegland.com.au
@dogonyat1000
3 жыл бұрын
when will Nukatap FC available for China?
@KegLand
3 жыл бұрын
Best to check with your local supplier.
@leonardopedrossantti3723
3 жыл бұрын
Hello guys. I´m from Brazil. Do you have any distributor here?
@KegLand
3 жыл бұрын
We have a complete list of distributors on our website.
@JamesKeane88
2 жыл бұрын
my red washer broke after 1 month !
@KegLand
2 жыл бұрын
I think you must have a faulty washer in that case. If the washers are made correctly they should last practically forever. Please contact us with your order number and we will send you a free replacement.
@andrewchapman261
3 жыл бұрын
Interesting! Anyway of fitting a spring to the old intertap fc?
@KegLand
3 жыл бұрын
No the old Intertap FC is impossible to fit a spring to. We tried and we would have liked to offer a spring for this model but it just was not possible.
@Greta-Thunberg-How-Dare-You
3 жыл бұрын
@@KegLand Kee, people are dying! how dare you!
@KegLand
3 жыл бұрын
@@Greta-Thunberg-How-Dare-You Hello Greta. It's a pleasure to have you on our channel. What a privilege! I was just reading a story to my daughter about influential females in the world. How is the flying going? Can we set up some taps for you on the next international flight?
@Greta-Thunberg-How-Dare-You
3 жыл бұрын
@@KegLand your comment has angered me! how dare you!
@ryanc3001
3 жыл бұрын
not in english, and i havent tried it but saw this solution the other day which uses a poppet spring... kzitem.info/news/bejne/0YSXumtjpnVegWU
@bertb4185
3 жыл бұрын
will there be an (awesome) black edition?
@KegLand
3 жыл бұрын
The black taps are going crazy at the moment. We originally did not have plans to make a black Nukatap FC but now with the number of people asking for them I think we will have to. So don't be surprised if we have a Nukatap FC in matt black soon.
@11344bcornell
2 жыл бұрын
@@KegLand Hello any update on black Nukatap FC? getting ready to get the stainless but would like to wait if the black are coming out soon hopefully
@Krokillious
3 жыл бұрын
When is Brewzilla 65L version 4 coming out? And will it have a conical bottom with pump suction in from it?
@KegLand
3 жыл бұрын
The Gen 4 BrewZilla will not be released until 2021. We do not have the release date yet as we still have a lot of work to do on this design. With that said if you have any particular requests please email us as we are still looking for customer feedback and input on this at the moment.
Пікірлер: 76