best overall explanation on the removal of a 2nd gen tundra bumper.. Thanks!!
@lukeshaia
7 ай бұрын
Glad I could be of help!
@geraldtran9977
3 ай бұрын
did you have to cut anything? does fender liner line up with the bumper? looks great!
@lukeshaia
3 ай бұрын
No cutting required, the fender liner you remove the bottom section and throw the two clips back in on the top section and you’re good to go!
@blessedohanaoverland
5 ай бұрын
Good stuff. How are the fog lights mounted? Also, how sturdy is it? Good enough for some light off roading?
@lukeshaia
5 ай бұрын
Very sturdy! The fog lights are bolted in through the rear. Easily accessible with the fender liner removed.
@coltonbowlden1137
3 ай бұрын
Just installed my Hooke in my tundra thanks for vid bro easy to understand homie. Thank you get the skid it looks rad
@lukeshaia
3 ай бұрын
Appreciate it!
@ulrblitzer
5 ай бұрын
Thanks for this. Ran over some road debris. Have this bumper coming in today.
@lukeshaia
5 ай бұрын
Sweet! It’s gonna look sick!
@sniper524
6 ай бұрын
I got a huge dent in my bumper that just happened so I’m gonna have to replace it. I think I might go this route.
@lukeshaia
6 ай бұрын
You should, they’re dope!
@nickolasdparks1889
8 күн бұрын
Could you send a link to where you got the grille and outside grille trim? I have a 2007 Tundra
@lukeshaia
8 күн бұрын
I’ve got everything outlined in my video here 👉 kzitem.info/news/bejne/rp-Dx56jcKp4emU Hopefully that helps!
@jeffsweet3048
7 ай бұрын
Did you replace the grill on this Tundra but keep the surrounding trim? Looks nice!
@lukeshaia
7 ай бұрын
Thank you! I actually replaced both. Mine is an 07, which came with the bulkier surround. 2010-2013 has the slimmer look, so I swapped to a 2010-2013 surround and the TRD insert.
@jeffsweet3048
7 ай бұрын
Did you have fitment issues on your grill? Mine is not sitting flush against the vertical mounting suppports...
@lukeshaia
7 ай бұрын
@@jeffsweet3048do you have a 2007-2009 or a 2010-2013? The 2007-2009 you either have to remove them, or order the 2010-2013 ones. I don’t have them on my grille, since mines an 07.
@jeffsweet3048
7 ай бұрын
@@lukeshaiamy truck is a 2012
@lukeshaia
7 ай бұрын
@@jeffsweet3048Interesting, it should be an easy swap then. Not sure why it wouldn’t fit.
@ahmedabdullahi4305
5 ай бұрын
Hey Luke question bro, isn’t the crash bar there for a reason? Feels weird removing sum that would help in case of an accident ? Just wondering brotha
@lukeshaia
5 ай бұрын
It replaces the crash bar, because it will do the same thing a crash bar does. A typical front bumper is designed to squish, the crash bar takes the hit. In this application, the bumper is now designed to take the hit.
@ahmedabdullahi4305
5 ай бұрын
@@lukeshaia thanks bro, I feel more comfortable getting it for my 13 tundra now…u ever planning on getting a light bar for the roof or it’s not worth it ?
@lukeshaia
5 ай бұрын
@@ahmedabdullahi4305not for this truck. I did on my last and had to put holes on the body of the truck. Wasn’t a huge fan of it.
@monetsengnalivong6471
7 ай бұрын
You didn't install the led bar in the center ? I'm planning on getting this for the front n rear 2015 toyota tundra trd pro crewmax
@lukeshaia
7 ай бұрын
No I didn’t, I’m still deciding if I want to or not :/
@monetsengnalivong6471
7 ай бұрын
@@lukeshaia it looks greats bith ways with or without still beautiful 🤞❤️❤️🥴🥴🥴
@sniper524
6 ай бұрын
That’s sick 🎉
@lukeshaia
6 ай бұрын
Thank you!
@AlexanderHernandez-dd5vj
3 ай бұрын
What do you use to connect the black and red wires coming off the fog lights to the truck wiring?
@lukeshaia
3 ай бұрын
I bought a male & female connector package for my fog light bulbs, and wired the male connector to the fog lights so that it would plug into the existing female connector on the chassis’ wire harness. Here’s what I bought: a.co/d/0gxlcrRf
@lukeshaia
3 ай бұрын
Give this video a look: TOYOTA TUNDRA FOG LIGHTS DONE!! #shorts kzitem.infoqGoMPJm2fYg?feature=share
@geraldtran9977
3 ай бұрын
my 2011 tundra did not come with factory fog lights, does bumper come with all wirings and relays required to install the foglights? thanks!
@lukeshaia
3 ай бұрын
It did not, it comes with the Foglights and the ground and power wires, I got a connector off Amazon to be able to wire them into my factory Foglight connections.
@lukeshaia
3 ай бұрын
Shoot me a message on Instagram if you need some help! It’s luke_shaia
@TeddySwolesevelt
2 ай бұрын
@@lukeshaiawhat connector did you get off Amazon for the fog lights?
@lukeshaia
2 ай бұрын
@@TeddySwolesevelt I used these a.co/d/3sJQkbx
@bicmitchum4091
3 ай бұрын
Does this weigh more than the stock front bumper ?
@lukeshaia
3 ай бұрын
I would say most likely yes, the entirety of the new front bumper is heavier, but it includes the front subframe. You remove the old bumper and subframe and replace with this bumper.
@jare232003
2 ай бұрын
No sonar detector ports?
@lukeshaia
2 ай бұрын
???
@brandonholt5544
7 ай бұрын
Do you have a instagram ? I’d like to see more on the bumper and ask a few questions before I buy
@lukeshaia
7 ай бұрын
Yes I do, it’s Luke_Shaia
@nic_magin
8 ай бұрын
Add Hooke Road Bumper to your tittle. I found your video by accident. You'll probably get more traffic if you add that name to the title.
@lukeshaia
8 ай бұрын
Appreciate it!
@ChuckDixx
Ай бұрын
100% agree
@tunikaranja5396
6 ай бұрын
YOU HAVE TO UNINSTALL THAT CRASH BAR IN THE MIDDLE HE FORGOT TO SAY THAT 🗣️🗣️
@lukeshaia
6 ай бұрын
I thought I mentioned it?
@thomasrocha3106
6 ай бұрын
@@lukeshaia he mentioned it
@mw3fanboy6
8 ай бұрын
Should powder coat color match them to that white and that would look 🔥🔥
Пікірлер: 51