IT'S FINALLY DONE! LEARN HOW TO MULTIHOOP STEP BY STEP AND GET PERFECT REGISTRATION! YOU CAN DO IT!
@pamelaalcorn5915
5 жыл бұрын
Sue, loving all that you do in your very educational videos but I cant stand to see you struggle with the sticky-back stabilizer. In order to keep the sticky-back stabilizer from sticking to everything is to first hoop it with the paper backing still on it (blue grid side up); then use a pin to score the blue grid with an X diagonally from corner to corner and then pull off the grid paper leaving the sticky part (sticky side up) exposed so that you can stick the fabric down.
@sonjagordon4879
5 жыл бұрын
Where do I find the 1st video to multi hooping
@elizabethkrzywicki42
26 күн бұрын
OMG!!! This will forever change my work!!! Thank you!!
@donnastepp9052
5 жыл бұрын
Thank you Sue, I’ve never done the multi hooping. You make it look so easy. Now to watch the first part.☺️
@OMLembroidery
5 жыл бұрын
😀
@jay_cadiramen
4 жыл бұрын
This is GOLD!!! My poor trust Bernina Artista 180 with its "tiny" 6x7 inch hoop may be able to do all those larger designs I drool over!!!!! Yay!!!
@kathysmotryski2437
Жыл бұрын
The placement is the most important part of hooping, so you must be precise if you want a good finish
@tammy5590
5 жыл бұрын
I learned this 20 yrs ago with Embird and lot different. But I can tell you it would be easier for you to hoop your flimoplast then score in the center and remove the middle of the paper. Easier on your hoop too.
@OMLembroidery
5 жыл бұрын
Tammy J yep..if i had the right size i would have done it properly :). I had to improvise a bit!
@Braisin-Raisin
4 жыл бұрын
I make very lightweight items that cannot be washed and I don't want want any sticky stabilizer. Instead, I have found the temporary adhesive spray very useful. I press (no steam) the piece after emroidering between a folded sheet of "baking paper" ( it is brownish and one can bake on it up to aboput 250°C). This removes any trace of the spray.
@Bonny2506
5 жыл бұрын
Thank you for this video Sue. I have wanted to know how to do this for a very long time. Mystery solved!!
@OMLembroidery
5 жыл бұрын
mystery solved!! I am good at embroidery mysteries! I will be showing some other ways of multi hooping at the machine in later videos.
@asimeral
5 жыл бұрын
Great video. 😷 Would love to see you do this in EMBIRD.
@nicolassmith1278
2 жыл бұрын
Hi pretty lady. How are you doing today????
@Gunjji
3 жыл бұрын
I was like, wait a min, does Sue have a "Triple X" tattoo, kept watching and there it was again. You go girl! and thanks for these awesome videos, I am learning tons with this software.
@cindymurdaugh5896
5 жыл бұрын
Another great informative video. I will be doing a multi hooping of a name for a friend today. Thanks Sue💕
@OMLembroidery
5 жыл бұрын
😀
@catmechanic1261
5 жыл бұрын
Very cool, Sue
@pinkartcreations9214
5 жыл бұрын
Impressive!!!! Registration x mark is the key
@OMLembroidery
5 жыл бұрын
yes, X marks the spot as they say!
@brieclearwater9508
5 жыл бұрын
Thanks so much. I think I've finally got it! This method with do for me right now but I am interested in hearing about your other techniques.
@sandrasepulveda727
2 жыл бұрын
Very Simple Thx Sue . oh by the way love your nail color
@theresarodriguez1454
5 жыл бұрын
Theresa from Puerto Rico, I love your classes great detailed explanation. I watch your Embird and Hatch videos. Thank you for taking your time to teach us. Looking forward to the next class.
@crazygoodtherapy9614
3 жыл бұрын
Finally a video that gets straight to it!
@kristiesmith7233
5 жыл бұрын
I'm can't find part I for multi hooping. Can you post a link?
@altagibson7979
5 жыл бұрын
kzitem.info/news/bejne/pYmHrGmbpH1qrKg I think it is this one
@kimmiesrhythms
4 жыл бұрын
I also need the link to the first video. I’ve been searching for hours unable to find it. That link posted is this same video.
@gracedeman4884
5 жыл бұрын
Thank you for this video. I have a tray cloth design that goes over 4 hoops. I tried it once before but it came out all skew. I'm going to give it another try.
@OMLembroidery
5 жыл бұрын
yes, try it again, let me know how you do!
@Fallbaskets
5 жыл бұрын
Thanks Sue , this knocked out some of my questions. :)
@OMLembroidery
5 жыл бұрын
😀
@lindar7607
5 жыл бұрын
Great Sue thanks for another video⭐️⭐️⭐️
@OMLembroidery
5 жыл бұрын
😀
@cathyfarlow1211
3 жыл бұрын
Thank you. This is very helpful. Can do you one in PE Design?
@kokkieventer8837
5 жыл бұрын
Thank you Sue! great video, and very nice view!
@OMLembroidery
5 жыл бұрын
😀
@gillscarisbrick645
5 жыл бұрын
Brilliant video, one day I will pluck up the courage to do this.
@sailordixie
11 күн бұрын
All I have is a 5x7 inch hoop. Can I split an larger design and stll be able to move the hoop to embroidery the second part like you did? My machine is an old one.
@altagibson7979
5 жыл бұрын
Would love to see you do this in EMBIRD please, I do not know how to sort of use my Embird to do what is done in Hatch Embroidery. Can you pretty please do it for us Embird Girls as well. Would really appreciate it so Much.
@carolallnutt8036
5 жыл бұрын
Great video . Thanks Sue
@OMLembroidery
5 жыл бұрын
thanks for commenting!
@pittysmom
Жыл бұрын
Thank you!! Very very Helpful!
@shirleyking3790
5 жыл бұрын
You are a great teacher! 😍
@OMLembroidery
5 жыл бұрын
thank you!
@lrainbala7144
5 жыл бұрын
Looks very interesting, will try this soon
@craftoncue
5 жыл бұрын
This is so informative Sue, thank you so much. Linda
@OMLembroidery
5 жыл бұрын
😀
@suzannepaul8951
Жыл бұрын
Do the registration marks come with the design? How does the machine know to do the registration marks on the finished first part and then again on the stabilizer before the second design?
@beththormann440
5 жыл бұрын
Thanks, nice to see it in action!
@OMLembroidery
5 жыл бұрын
😀
@ivybichon8582
4 жыл бұрын
Did you assign the registration marks using your embroidery software? If you don't use software is there an alternate way of doing this?
@simplysvg1
5 жыл бұрын
Great video Thank you
@OMLembroidery
5 жыл бұрын
😀
@aprilstevens7216
2 жыл бұрын
Is there a link to the first video or what is the name of the video? I'm having trouble finding part one. Thank you
@cindyking3304
5 жыл бұрын
Now I see!!
@OMLembroidery
5 жыл бұрын
yes! multihooping can be done seamlessly!
@eulaliahegner713
3 жыл бұрын
Thank you so much for this! Do you think that it is possible to do this on a multi needle machine as well?
@sewingpassion
5 жыл бұрын
Thank you so much Sue for this video. Can you answer how big can a design bee total in cm if i split it? I mean it has maybe a limitation of digitizing a desing in software?
@OMLembroidery
5 жыл бұрын
I don't think there is a limitation, although your machine may have issues if the design is too large. Try it on a large design and split it according to your largest hoops size.
@mmchoto577
5 жыл бұрын
Hey Sue I like your video can we do a super complex one with five hooping
@deneseswackhamer7767
5 жыл бұрын
After embroidering, I have difficulty removing the sticky stabilizer from my project. Also, it seems kind of stiff. Any suggestions?
@OMLembroidery
5 жыл бұрын
Yes, I don't really like the sticky stabilizer either. If you are doing a shirt, you could iron on some soft fusible backing to cover up the sticky stuff.
@georgianelson5038
3 жыл бұрын
Totally confused. When I get a design that is split I am going to watch this again. Thanks.
@OMLembroidery
3 жыл бұрын
You can do it!
@Ninalovesyou15
3 жыл бұрын
Great video...can i multi hoop on a 4×4 design ?
@lymezombie6580
5 жыл бұрын
Thanks!
@OMLembroidery
5 жыл бұрын
😀
@kellylemen7095
5 жыл бұрын
Hi. Do you know if you can do this on the Brother 800?
@OMLembroidery
5 жыл бұрын
you can multi hoop on any machine - it's the software that will set it up for you.
@joannpadia
5 жыл бұрын
I guess I'm lost. didn't that stitch the x's in the same exact spot on the second as it did the first?
@craftswithkim7488
5 жыл бұрын
thank you so much!
@OMLembroidery
5 жыл бұрын
You are very welcome, I am glad you are enjoying the videos! thanks for watching!
@haleymilligan2948
Жыл бұрын
Would you happen to know why registration marks show up on my hooping files on Hatch, but then only one singular registration mark shows up on my machine when I go to stitch? The first hoop file shows about 5 registration marks when I view the file on Hatch and on my computer, but then only 1 mark shows up on my stitch file on my machine. I can't find answers anywhere :/
@jmon1334
4 жыл бұрын
Ok Sue you are my go to gal ! I have a question. Can you multi-hoop ITH Larger projects? Such as Wallets?
@OMLembroidery
4 жыл бұрын
I don't think you can, it would be too difficult to get everything to line up.
@jmon1334
4 жыл бұрын
@@OMLembroidery That sucks. Thank you Sue for answering!
@shellieallen6456
2 жыл бұрын
Where is the first video
@sheridaphibbs1172
5 жыл бұрын
Thank you,
@OMLembroidery
5 жыл бұрын
You are very welcome, I am glad you are enjoying the videos! thanks for watching!
@shazzcarts
5 жыл бұрын
Thank You Sue. Can this be done in Embird or PE Design 10?
@pinkartcreations9214
5 жыл бұрын
Sharon Carter Sure, it is possible multi hooping in PE Design 10, you need to use the positioning sheets as an aid for layout see page 183 the tutorial 9-2 designs multi-position hoops in your online manual. I have tried and digitized one (not the tutorial) alone and untrained using PE Design Next (I just upgraded to PE Design 10) but I have yet to stitch it out. Just have a go is what I would suggest
@OMLembroidery
5 жыл бұрын
thank you, good answer!
@sinaseyedian8862
4 жыл бұрын
These tutorials have finally allowed me to drop out of college!
@sherrilees
4 жыл бұрын
any help with pe10 or floriani to use split designs in repositional hoop
@WildOrsonNatureAdventures
5 жыл бұрын
Will the registration marks mess up tshirts when they get removed?
@OMLembroidery
5 жыл бұрын
no they won't mess up anything! the registration marks are longer stitches, so they are easier to remove.
@amitphotos
5 жыл бұрын
Is there a link to the first video please?
@OMLembroidery
5 жыл бұрын
the first video is how to set up Multi Hooping in Hatch. kzitem.info/news/bejne/1nyik5yhinSEkqg
@busgoose
5 жыл бұрын
Every time I use sticky stabilizer my needle gets all gummed up. Any helpful hints?
@OMLembroidery
5 жыл бұрын
I don't use it for that reason - it makes such a mess.
@barbiesam1
3 жыл бұрын
How would you do multiple hoopings on a Barudan machine for 8 foot banners (letters)
@nicolassmith1278
2 жыл бұрын
Hi pretty lady. How are you doing today?????
@brittanyanndavid3123
Жыл бұрын
Where is the first video? I need help. :(((
@mariacasiano498
5 жыл бұрын
can you use this technique for names to be bigger than 5x7?
@nicolassmith1278
2 жыл бұрын
Hi pretty lady. How are you doing today???????
@MaddnessCreations
Жыл бұрын
Where is part 1?
@karina543
5 жыл бұрын
❤️❤️❤️
@OMLembroidery
5 жыл бұрын
😀
@sarawalker561
5 жыл бұрын
where is Part 1 of this video
@OMLembroidery
5 жыл бұрын
Sara Walker part 1 is setting up the design in Hatch on the computer.
@marykubach1188
5 жыл бұрын
It's not lined up
@OMLembroidery
5 жыл бұрын
If you look at it closely, everything is lined up perfectly! I am happy with the results, and it looks great.
@gedoeniko
5 жыл бұрын
:)
@OMLembroidery
5 жыл бұрын
😀
@cherylnieman3223
5 жыл бұрын
V
@donnastepp9052
5 жыл бұрын
Thank you Sue, I’ve never done the multi hooping. You make it look so easy. Now to watch the first part.☺️
Пікірлер: 109