I used Simpson Strong-Tie 2 inch x 1-1/2 inch x 1-3/8 inch ZMAX Galvanized Angle brace. Saves all the fabrication.
@Buckboard
Ай бұрын
I just made two of my own. Sprayed them with Plastic dip.
@HotBuoyFishing
2 жыл бұрын
It sucks you got all of that carpet up agains your tracks. I have a tracker and use Scottys in my Versatrack. I can mount my Scotty's right to the track and not have to deal with the sharp edges. Great DIY vid
@autreyodom3607
2 жыл бұрын
Like the rubber washer idea.
@TeamTnA44
2 жыл бұрын
They struggle Use Teflon washers
@davidhefner5668
3 жыл бұрын
Those will work great. I used 1" thick blocks of black HDPE for everything.
@LivingWisconsin
3 жыл бұрын
Good choice!
@vhype233
2 жыл бұрын
What's HDPE?
@vhype233
2 жыл бұрын
Love the invention. What about the driver side 🤔 it's tougher because of the wire cover. Another issue if you need longer screws there's no inlet to insert longer screws. You cannot go from front the because longer screws can't pass by the console
@LivingWisconsin
2 жыл бұрын
Thank you for watching as well as the comment! These work very well on the driver's side as well. You may have to adjust the layout of the hold down holes to suit your needs.
@LuisSanchez-lu4cu
3 жыл бұрын
Speedy metals will cut all them to length. Worth it.
@LivingWisconsin
3 жыл бұрын
Thank you for the reply Luis! You are absolutely correct. It is well worth it. Thank you for watching!
@rogermadrange1724
Жыл бұрын
Excellent! Thank you
@delstep2255
2 жыл бұрын
Thanks my brother
@LivingWisconsin
2 жыл бұрын
Thank you for watching!!
@davidhefner5668
3 жыл бұрын
The problem with Versatrak....not enough access holes.
@LivingWisconsin
3 жыл бұрын
I completely agree.
@TeamTnA44
2 жыл бұрын
Drill some
@joedarneal5409
2 жыл бұрын
More than one way to skin a cat , Good Job 👍
@LivingWisconsin
2 жыл бұрын
Thanks for the feedback and big thanks for watching!
@dmwil1
7 ай бұрын
You said you would put a link to those knobs from Amazon. I don't see it. Do you have the link or at least the size?
@maxwilson825
6 ай бұрын
What size carriage bolts did you use?
@juliethao53
3 жыл бұрын
Can you put down the model number for the piece of aluminum you got?
@LivingWisconsin
3 жыл бұрын
Thank you for watching Julie! No problem: www.speedymetals.com 1/4" {A} x 3" {B} x 3" {C} Angle 6061-T6 Aluminum, Extruded-36" SKU: 61a.25x3-36
@juliethao53
3 жыл бұрын
@@LivingWisconsin Thank you. just checked out the site. Shipping is fairly high..
@LivingWisconsin
3 жыл бұрын
This is what I paid. You are correct in higher shipping. There could be a better deal out there. Overall..they have been reliable, decent inventory, good customer service, and acceptable delivery time. Good luck! Subtotal:$39.02Shipping (UPS Ground):$16.11Tax:$2.76Total:$57.89
Пікірлер: 28