Just picked up the Echomap Ultra 126SV and this is the best video I’ve seen on KZitem that explains water conditions and making small and simple adjustments to maximize your unit. The KISS method (keep it simple stupid) in full effect and it’s great. Thanks for the video and great tips.
@CrappieMonster
11 ай бұрын
Thank you
@joebowman8204
11 ай бұрын
Man I appreciate you doing this video. I’m learning my livescope. I input your settings while on Lake Darbonne today. It was crystal clear.
@CrappieMonster
11 ай бұрын
Awesome! Thanks for the feed back.
@waymondwade2511
6 ай бұрын
Going in the morning to try out these settings. Thank you for the great explanation on these livescope settings!
@CrappieMonster
6 ай бұрын
No problem at all! Thanks for watching
@bidkid2020
2 ай бұрын
Really do appreciate the video on the LV 34 I'm still having problems but it's me not the equipment going to try some of your suggestions and see if it helps with the clarity and keeping track of my lure.
@petsurimiikuki7625
9 ай бұрын
Wow, just wow. Tried these settings this morning and by far the best settings I have used (echomap ultra 102sv + lvs34). Thank you for sharing bro 👍
@CrappieMonster
9 ай бұрын
Absolutely! Glad it helped
@billyshipp4080
7 ай бұрын
Thanks for these awesome setting never been so clear
@CrappieMonster
7 ай бұрын
Happy to help!
@sinnedbo1993
7 ай бұрын
Thanks to much I really appreciate the setting by far the best I have found thanks for sharing
@CrappieMonster
7 ай бұрын
Glad to help, thanks for watching
@lesyoung9294
Жыл бұрын
Would love to see a video about how to get a lvs32 really clear.
@Aintright1965
11 ай бұрын
Thank You for this info now let's go catch some
@CrappieMonster
11 ай бұрын
Good luck. Thanks for watching!
@resacarebel1868
Жыл бұрын
Man I really apprecaite the settings.
@CrappieMonster
Жыл бұрын
It just gets it simplified. Most people are over thinking it. Thank you
@joenorton6594
2 ай бұрын
Great job
@CrappieMonster
2 ай бұрын
Thank you.
@TheFISHIN14
Жыл бұрын
Thanks Buddy🎣
@CrappieMonster
Жыл бұрын
Yes sir!
@TheFISHIN14
Жыл бұрын
@@CrappieMonster Always appreciate the way U put it down on the knowledge for us all and providing us all with enjoyable videos 🤞🏼👍🏽🌟
@ryanpinkston6565
10 ай бұрын
Great video. What bracket is your live scope pole on? And what pole do you use?
@CrappieMonster
10 ай бұрын
I have two in there. One straight to the trolling motor and the other on a All Aboard All Sync.
@getthenet2358
10 ай бұрын
I think you may have just saved me $1,5000 thank you.
@CrappieMonster
10 ай бұрын
I hope so. Thanks for watching
@WaylonWaller
27 күн бұрын
Video on how to set your livescope up to find way points.
@CrappieMonster
26 күн бұрын
I can do that. It’ll be a short video so we’ll probably put that on Facebook. Make sure to follow us there.
@MrBryanborn
Жыл бұрын
Thank you for the tips! Question, Does your screen ever freeze up even when you have plenty voltage. I replaced batteries, new power cord, new cradle and it still freezes up on me. So frustrating.
@CrappieMonster
Жыл бұрын
Mine does not. I would send it back.
@GetBitOutdoors
2 ай бұрын
Great job. Thk u, what size screen?
@CrappieMonster
2 ай бұрын
16”
@JR-mn5pv
7 ай бұрын
Sweet, thank you .where did you get the stand from for unit please ?
@CrappieMonster
7 ай бұрын
Cornfield fishing
@kendallbeck9919
Жыл бұрын
If they’re linked together and you reset, you’ll also lose settings on other units.
@jamesthomas5773
4 ай бұрын
Confused. If I disable sonar, how will I be able to see fish on my FF screen? I run a portable Garmin Ehco Map 93 with pole mounted transducer exclusively for my LiveScope. I rely on my boat mounted Lowrance FF for side imaging, sonar, etc. With everything running, I can’t get any closer than 45 feet to winter crappie schools suspended in waters 30-45 feet deep. Please clarify what I can do with my electrons to not spook deep water crappie schools. Thanks…loved your video and have subscribed.
@CrappieMonster
4 ай бұрын
I only disabled sonar on the back unit. The front one was still on. The back one will still ping from the transducer.
@jamesthomas5773
4 ай бұрын
@@CrappieMonster Well, I’m a newbie so more confused now than before. This novice is just not getting it. Thanks for trying.
@WaylonWaller
Ай бұрын
How about a video on which is better for the lsv32 mounting on a pole; starboard or port side.
@CrappieMonster
Ай бұрын
In my opinion, it would depend on whether you’re right handed or left handed. For me it’ll be starboard
@WaylonWaller
27 күн бұрын
Pole is on starboard side of boat, but transducher is on the port side of the pole. What does that look like on livescope.
@brianrogers3187
6 ай бұрын
What’s the name off the poll u have mounted to your trolling motor for the live scope transducer
@CrappieMonster
6 ай бұрын
All Aboard Marine Model All Scan
@Edragonslayer
9 ай бұрын
How long have you had the all sync setup? How do you like it?
@CrappieMonster
9 ай бұрын
Around a year. It’s a good product.
@jamesbrowning6844
3 ай бұрын
What Software Version Are You Running I never Can Get my screen this clean
@CrappieMonster
3 ай бұрын
I’ll have to look because I’m not sure. I try not to update unless I have to.
@getthenet2358
2 ай бұрын
What can I adjust to lighten up the three beams shooting down at an angle?
@CrappieMonster
2 ай бұрын
Color gain.
@mikedixon3292
Жыл бұрын
Is your graph on the front and console linked with a Ethernet cable. Mine are so if I disable all sonar it disables all sonar even my panoptix.
@CrappieMonster
Жыл бұрын
Mine are not.
@mikedixon3292
Жыл бұрын
@@CrappieMonster thanks. I was hopping for a little miracle cure other than breaking my connection. Thanks again.
@titansfan2104
Жыл бұрын
@@mikedixon3292 i think you can disable "ALL" sonar and go to your panoptix screen>menu>enable transducer. I believe that will enable just your LS transducer
@markpayne6556
9 ай бұрын
What adjustment can I do to see my jigs.
@CrappieMonster
9 ай бұрын
Most the time it’s practice staying in front of the beam. You can turn up your color gain and your regular gain to help make it brighter.
@ronniehamrick54
2 ай бұрын
What do you change during pollen season on weiss lake??
@CrappieMonster
2 ай бұрын
If pollen gets really bad, turn your color gain down.
@Crappie_Hunter_Seeker
Жыл бұрын
I have tried these settings but my unit still is not as clear as yours. Not sure why. I made sure I had good clean power to the unit. I just wonder if some units, from the factory, work better than others. Its not as clear and I have trouble seeing my jig. Any ideas?
@CrappieMonster
Жыл бұрын
I would factory reset the default settings and then go back to the settings from the video. That will usually help.
@don-magiclivescope-juan8752
Жыл бұрын
Probably because you might not have the same unit
@Crappie_Hunter_Seeker
Жыл бұрын
@@don-magiclivescope-juan8752 Possible. I have a Garmin 126SV. I have heard that the Echomaps are better for Livescope. Not sure.
@WaylonWaller
Ай бұрын
If your in 16 ft of water what setting do you go too. Some say 5 to 10 ft above the depth your in.
@CrappieMonster
Ай бұрын
20’
@WaylonWaller
Ай бұрын
Thank you
@lesyoung9294
4 ай бұрын
Did you have the lvs 32 or 34 when making this video? Thanks
@CrappieMonster
4 ай бұрын
34
@lesyoung9294
4 ай бұрын
@@CrappieMonster thanks
@brianscott5865
11 ай бұрын
what unit are you running
@CrappieMonster
11 ай бұрын
That one is a 8616
@kidiraq8381
Жыл бұрын
Do you ever use the blue screen? When they installed mine they put the settings in and told me I was good to go. I’ve never even tried amber. God Bless!
@CrappieMonster
Жыл бұрын
I have. It’s just not my favorite.
@kidiraq8381
Жыл бұрын
@@CrappieMonster Thank you Sir. 1st time seeing your channel. Good stuff. I run HBirds but have the 106sv for livescope. Shop messed with a few strings so I’ve been afraid to mess with anything while I’m learning. I can’t see my lure past 40-45 feet. Is that normal?
@CrappieMonster
Жыл бұрын
Yes watch my two Dale hollow videos: I was catching crappie and bass at 120’.
@kidiraq8381
Жыл бұрын
@@CrappieMonster Wow! Will do.
@bradnelson5125
4 ай бұрын
How do u feel the different color schemes affect your settings ?
@adriandavidpayne
4 ай бұрын
Which Garmin model is this?
@CrappieMonster
4 ай бұрын
8616
@scottjordon
Жыл бұрын
Is that the LVS34 or 32?
@CrappieMonster
Жыл бұрын
34
@69Bowhunter
2 ай бұрын
What unit are you running
@CrappieMonster
2 ай бұрын
That is a 8616 I am now running a 22” NBT
@69Bowhunter
2 ай бұрын
Thanks for the great video just set my EchoMap Ultra 126 sv up with these settings. Keep the videos coming.👍🏻
@projectfishinchannel33
10 ай бұрын
Mine has never looked anything like that in the beginning when you went oops and it got all grainy thats how Mine is all the time iv spent hours adjusting and adding grounds clean power went through all the settings and it still looks like crap
@CrappieMonster
10 ай бұрын
What unit do you have?
@projectfishinchannel33
10 ай бұрын
@CrappieMonster 106sv with the lvs32 I have hated it since I got it the lvs34 looks better from what I see people saying but I'd really hate to spend that money and be right where I'm at with a little less crappie imagine I'm still mad that I can't use it its so bad so much noise and grain even your stock settings are a 1000 times better then mine has ever looked
@CrappieMonster
10 ай бұрын
Something isn’t right with your setup. I had a little grain with my 32 but not enough to matter.
@projectfishinchannel33
10 ай бұрын
@CrappieMonster I'm going to get back in my boat and go over my settings again with your video and see if I missed something thanks brother I'll let you know if it helps
@marcusmorton8101
Жыл бұрын
16” screen?
@CrappieMonster
Жыл бұрын
Yes
@marcusmorton8101
Жыл бұрын
Awesome. Heard that the 34 is ideal for the 16 due to the fast processor.
@alexz1158
2 ай бұрын
My colour limit doesn’t have 0% it just says default
@CrappieMonster
2 ай бұрын
It will have a slide bar on the right side of the screen if you turn off default.
@alexz1158
2 ай бұрын
@@CrappieMonster I’m on version 28.00 on a 102sv and I can’t scroll past default
Пікірлер: 95