Hope you guys enjoyed this one. I know there haven't been any shop videos lately, next week's video will be about that and I think you will find it interesting. Please check out the Amazon Affiliate links here for recommended tools: Airlift Cooling System Vacuum Filling System: amzn.to/3D9AlPu Radiator Pressure Tester Kit: amzn.to/3QGBumn Milwaukee 3/8" Right Angle Impact Wrench: amzn.to/3D2CvAk Adjustable Height Parts Tray 100 lbs: amzn.to/3CBusZB Engine Oil and Fuel Dye UV: amzn.to/3z34zkv UV Professional Grade Light: amzn.to/3gzxPc0 Allstar Oil Pressure Priming Tank: amzn.to/3L5pASm Oil Pressure Priming Tank: amzn.to/3YuBrNr
@maximzhilyaev9554
5 ай бұрын
Hello Josh. May i ask you a question? Took my truck from shop after they did rebuild with Platinum rebuild kit on my C12 (2KS). My oil pressure is approximately 37-39psi on 1500 rpm, is it normal? Can I use Lucas to improve breaking-in? Thanks in advance.
@oldpete3153
5 ай бұрын
I bought a new KW in 1990 with a 3176, after most of the sensors failed in the first 6 months i had few problems after that. One thing I watched carefully was the coolant makeup due to the combination of aluminum and cast iron in the bloke...I saw many others have devastating problems because of the lack of maintenance of the coolant. All in all i got good service and excellent fuel mileage from this engine. My next two Cats were the venerable 3406-E 550's and thats a success story all in its own. Retired now and given the crap thats out there these days im not missing the business one bit.
@darrensteuber4994
5 ай бұрын
A local construction company had a fleet of Kenworths with the first 3176 engines. They hauled trash to their landfill in special built semi trailers. They had so many issues. CAT did free rebuilds on almost all of them. I think some got 2 free rebuilds. CAT ended up putting brand new engines in several of them. This company ran 100% CAT equipment, so they needed to keep them happy. The 3208 startled as a collaborative effort between Ford and CAT. They were designated as an 1160 and were painted Ford blue. They were later painted yellow, and I think I have seen a few painted white.
@MrMan5014
5 ай бұрын
Cat ran that engine in quite a few of their machines like graders and excavators…I ran them a lot and don’t really remember having much trouble with them but as with pretty much all cat engines, they seemed to work better and were more reliable in construction/industrial environments!..even the 3208’s worked great in the equipment and marine applications…not so much in the trucks…I started in the business in the mid 90’s so I started work at a time when all these engines converged and I could see how they all performed in comparison to each other…to this day I would have to say the 3306 was probably the best for its time and was a very capable engine…only issue I would say about it was it was hard on fuel…when the C9 came out, it pretty much blew the old 3306 and 3176 out of the water in terms of performance and fuel efficiency!..cheers
@BigJfan
5 ай бұрын
I worked for a company in the 1990s which had a fleet of Kenworths. The dealership had convinced them into buying a T-450 tractor with a 3176E and nine speed. It was a short wheel base twin screw tractor. The only thing they liked about it was the fuel mileage. Driving it took getting used to as it seemed to have a delay between the hot foot and ECM. Even the Jake seemed delayed. It actually pulled really well. But it also had a top speed of 63 mph @1950. One day it caught fire on I95. The cooling fan clutch malfunctioned and ignited the plastic fan ablaze. I was told that i should have let the truck burn to the ground. White it was in the shop being repaired,they ordered a T800 with a 3406 E. I always have thought that the 450 was speced poorly for the application we were using it for. The 3176 was at least as reliable as the earlier N14 electronic wise in my opinion. I don't remember it just shutting down on us for no reason. It always started even in the dead of winter. If i remember right it was getting nine mpg average.
@jamieebersole6755
5 ай бұрын
Hey Josh, thanks to your video about the Cat million mile club I just got some cool stuff from Cat for joining. I have over 2.3 million miles on my 6NZ
@philipchesley9615
2 ай бұрын
So I have the 3126. In a 1998 Pete 330 retrofit 14 whl dumptruck. Running Class 8 @ 61,000lbs GVW. Yep. Thanks to positive input from Josh and a very competent and FEARLESS local mechanic we run it hard every day in the desert metropolitan market. Bought 1.5 years ago from a reputable builder (was a trade in) but the cups failed on the fourth day in service . Rather than the Cat kit with new cups and special tool, I was offered the option of going with the Cat reman head which seemed a valid upgrade. Now running HARD every day with zero issues. ------- Note to all: The HEUI system DEMANDS clean engine oil for top efficiency and engine (HEUI pump) life. It MUST be changed every 250 hours REGARDLESS of the miles (or 5,000mi). That's once a month for us. Cat filter/Rotella. 709,000mi/33,000 hrs currently and the shop says the flywheel has been machined thus far to suggest replacement at next clutch. This "may" be an indicator of (guessing) the history of the pistons/bore condition. If still original, I'll be the first long block guy on this one lol! Long story short folks, Cat rules. Cheers!
@dalehansen5050
5 ай бұрын
I had one in my first semi,93 Pete 378 . I had very good luck with it, great milage and no problems. I put 600000 miles on it without ever going to the shop. Sold it at 826000 miles still running great.
@johngoldsmith6629
5 ай бұрын
If it had more time in the development stage, customers would have liked it more. By the time the 3176B (9CK) came out, the 2YG and 7LG, had hurt the engines reputation.
@Crockedflyer811
5 ай бұрын
Me and my dad still run one 1994 3176 in a t6 tandem with 6in stacks its got to be the best sounding cat out there the jakes are only for noise but they sure sound amazing
@mikemorse8592
5 ай бұрын
Hearing these guys talk about pages of updates and recalls brings me back to 2008 when the SDP’s hit the scene. A local shop just closed up and at the auction was an ECAP and timing probe tool group kit
@Mike-dn4ju
26 күн бұрын
Listening to this working on a pair of 3196’s in an older Sea Ray 480
@jamesembry6721
4 ай бұрын
I purchased a c 13 with the kcb designation. I pulled the trigger because you said it was your favorite. Good little engine so far
@myfirstnamemoss609
5 ай бұрын
My only experience with the 3176 is when a truck had pulled in with a miss. We hooked the computer to it and it blamed cylinder one. Turns out there were no issues with that cylinder, but it was still missing. I asked my foreman "what if it's reading the cylinders backwards and it's really number six?" He agreed, and after further diagnosis it was confirmed to be number six.
@jamesjohnson7266
5 ай бұрын
I worked in a Fleet environment in The late 90s early 2000s they had a good amount of these engines , We had okay, success. We were a light load Fleet. We did have some fuel leakage from the ECM's on the earlier models And occasionally the aluminum spacer plate would create some problems, The last time I put hands-on one internally was probably around 2008 I can't believe there's many left on the road.
@philtwitchell2126
5 ай бұрын
I also worked on the 3176 when it first came out. They were never meant to be used as over the road long haul. They were designed to be used in vocational applications to replace the 3306 and 3208. The 3176 was lighter by weight and could have more horsepower. The 3208 was always a throw away engine that rarely ever lasted into high mileage or hours. Customers always tried to use the 3176 like a baby 3406. That NEVER worked out well. We were always getting updates by mail weekly. We also would have meetings about every two or three months at the Cat dealership by satellite with Cat Headquarters 3406E and 3176 engineering teams. I would walk away with a stack of recalls and diagrams. Biggest problems I had was they had a aluminum spacer block between the block and cylinder head. The spacer block could not handle the influx temperatures between metals at start up and cool down. Head gasket nightmare!! Also the spacer block would get pitted due to incorrect coolant DCA mix. You had to remove the spacer block to replace the injector cups. Head bolts/block thread recall was a nightmare. I believe they were first all metric bolt/ thread engine released by CAT. I remember replacing flywheel housings due to customers trying to use the truck for the wrong application. So much for saving weight. I think there was a aftermarket company that made steel housings. You had to be extremely careful when removing the fuel lines off the ECM. If they broke you would half to replace ECM and swap the PM, re calibrate engine sensors add customer parameters. I recall replacing and installing new updated chips in the ECAP about once a month. LOL just found my master 7LG shop rebuild manual. Think I may have to go back into therapy after reliving these nightmares LOL. Well at least they didn't have a PEEC system.
@johngoldsmith6629
5 ай бұрын
If you look at test spec under TMI, the governor type is listed as PEEC.
@dieseljett1
5 ай бұрын
I've worked on a handful of 3176B's, and never thought they were all that bad. My only complaint is that it seemed like every one that I worked on came in for a cam/broken follower
@michaelfrew3127
5 ай бұрын
Looking forward to video of you back on the tools 🛠️
@rodneyward8357
5 ай бұрын
I worked for a company that bought a bunch of them. All had 10 boxes. I thought they were gutless. (Came out of a 3406b into one) I am a cat man. It pulled to me like a Detroit 60 series. Which i have never found to pull at all. I later drove one for a couple of days with a rtlo13b swap and it did ok. What does a Detroit and a green banana have in common? They both can't wait to turn yellow!!!
@jasontaber1981
5 ай бұрын
Had good luck from ours in a 93 intl. Experienced the ECM fuel leak issue though. What comes to mind when 3176 is mentioned is like the 3208, they have a unique sound and once you hear it, you can pick em out a mile away
@jim-zx7gz
5 ай бұрын
Heck of a learning curve going to electronic controlled engines..Many early engines were not good.. The 3406 PEEC in a Freightliner was a disaster..but in a K W or Pete worked much better..wiring problems? The 3306 Cat was a fanrastic engine. Lasted forever and had very good power for a small two valve engine 627E scrapers had them and they did a heck if a job
@donnysandau1548
5 ай бұрын
Im glad that a video finally came out about the 3176 Cat. I have one in my 1991 Beaver Marqis RV that weighs 35,000 pounds. It runs excellent so far.
@barrychouinard4019
5 ай бұрын
At the time the 3176 was a new engine, I was a driver for a fleet that had lots of them. Somewhere near 1988 or 89. They were an enjoyable engine to drive. The torque was so good the engine felt strong for it's horsepower rating and ran smooth. The cat engine was always one that tried to maintain RPM base on foot pedal position, where a cummins you would have to push the pedal down to get it to work harder. So as a driver it was a different experience to keep you foot pedal in the same position, and the engine would ramp itself up to use more power when needed. Somewhat like an electronic cruise control. They were nice engines when new, but we understood them to be a non-rebuildable engine from the start. That feature that did not allow an overhaul, caused these engines to leave the marketplace just as quickly as they were introduced. After these trucks got 7-800,000 miles, they started being parking lot queens outside the shop. When they were used up, they were gone. It was a fun engine to drive though.
@jasonbauer8
5 ай бұрын
Josh I have one of these in a 96 kenworth t800, it's been a great engine! It's rated at 365hp. It's backed with a 10 speed with 4.11 gears. I would have to say it's not big on power but, totally reliable, it's approaching 800k and still going strong! When it does fail, I would like to replace with a C12 since it appears the architecture is the same. I have another truck with a C12 set at 435hp that is really strong so I think that would be the best choice!
@rossbryan6102
5 ай бұрын
WORKING AS AN DRIVEAWAY DRIVER , OF ALL THE ON ROAD ENGINE CATASTROPHIC FAILURES OF CAT ENGINES, THE MAJORITY OF THESE WERE THE 3176 SERIES!! “ YELLOW EDSEL” IS THE BEST DESCRIPTION EVER FOR THIS PILE OF JUNK!!
@Rylie307
4 ай бұрын
Was the engine I tore down and reassembled in school, it was an oddball for sure
@TedsGarage
5 ай бұрын
I do enjoy these engine background videos. I've never owned a 3176 but looked at a few vehicles that did have them and considered it. In aviation we have the saying "Never fly the A-model of anything". Usually the designs are fine, but whenever you have something that is the first days of a new technology with a lot of more "revolutionary" features, some problems are generally going to come with it. Now I own a DD 12.7L Series 60 (DDEC IV) and while I wish it was a C-15, it's pretty good. It's interesting comparing the thoughts from two mechanics who worked on 3176s, both when they were brand new and then midway through the life cycle. I've found that a lot of times this sort of bipolar view happens. I used to work on Jaguar V12s, commonly known as notorious problem engines. However I was working on them when they were in the range of around 7-25 years old, well out of production. I worked on probably around 50 of the things and owned several myself, putting 30,000 miles on the one in my first car during my freshman year in college. I found the things overall very reliable if you knew how to work on them and what they needed. In general, new designs take these first few years to get the kinks worked out and often the second owners have a better time with them than the first ones. Hope to see more wrenching videos again soon, but I do enjoy ones on engine details as well. As an engineer who used to do engines for a living (both piston and turbine) I'm a bit of an engine guy.
@stanpatterson5033
5 ай бұрын
I drove several trucks that had 3176's. Most with 13sp, some with 8LL. The only repetitive problem that I recall, were failed injectors, either the tip would break off, or the entire injector would fail. We had one in a WhiteGMCVolvo, it suffered a fuel prime issue, and on a bad day if you got into heavy traffic, you needed a helper to jump out, open the hood, prime it with the hand primer, slam down the hood while you kept the revs up, and take off again. If the revs fell off, she'd suck air. Anyways, no, they were not BIG power, but for the most part, were pretty reliable, save for injector issues.
@seansclassoictrucks
5 ай бұрын
my old 1990 Freightliner Cabover hobby/yard truck had a 2YG in it, ran good! but heard it was problematic when it was new, after many tow's and analysis they figured out it was the spacer plate
@1234563221
5 ай бұрын
Used to maintain a fleet of L9000 flatbeds with 3176 in them. Never had to much trouble with them. This was between 2003-2007. I did have a few with broken head bolts. We left one truck with the RR head bolt broken. Truck was going to be traded soon I was told. Seen it on the road in 2010 same driver same head bolt still broken running fine.
@plezo69
3 ай бұрын
I have an 1993 pete 377 with a 7lg 3176 in it that matches the truck vin and it shows well over a million miles and fires right up thing is a workhorse.
@mikekahl4745
5 ай бұрын
I have a 3176 9CK in my 96 Frieghtliner, owned it between 650k and 830k miles. My mechanic pulled the head because of a bad diagnosis, which later caused a head gasket leak. All repairs were expensive but to replace the aluminum spacer would have scraped the engine. Over all I'm happy with the engine, hope it lasts another 150k miles.
@misterhipster9509
5 ай бұрын
Interesting the 3208 was mentioned, my baby. Used extensively by Bluebird in skoolies and Wanderlodge motorhomes. My personal front engine 35' towing race car trailer GVW right @ 42k. Moves pretty smartly as it's set @ 350hp w/ custom radiator and CAC, see 20#s boost w/a little propane tickle and Methonal injection to keep things cool on a hard climb. EPA bastards cost us the good old throwaway and the 2 stroke jimmies.
@youtubeisawesome2487
5 ай бұрын
3176, c12,c13 all started as a copy of the l10, m11 cummins to compete with that engine family.
@cargotoolshop5319
5 ай бұрын
I had many of the little Cummins and really liked them, mine where budget trucks and nothing nice, so 330-350hp but you could turn up a m11 to 500hp, to this day I want one just so I can put a tune into it, you know you can bolt a N14 ECM on those little engines and they run, interesting thing to know
@simonschmidt7327
5 ай бұрын
Hey mate, your KZitem award needs a spirit level putting over it. Elton John is straighter than it
@jamesrodriguez5799
4 ай бұрын
Thanks for making this video i have this engine !!!
@blackmarkettrucking5821
3 ай бұрын
Great info Josh, 👍🏾
@rustyshank912
5 ай бұрын
Just a little information. A Deutz 912/913 engines only have one camshaft bearing behind the cam gear and all the rest of the supports in the iron block relied on oil only to prevent wear.
@agviator
5 ай бұрын
Had mixed luck - Had the fuel leaking ecm issue on one, had a 3196 in an 85E that failed due to oil ingestion. after a turbo failure at 1500 hrs, a 75c that had 8000 hrs before traded with no issues, and an A and a B that ran went over 500k with no issues. Loved the reliability of the 3306 but at 300 hp were under powered for my liking unless used in a more vocational application. Correct me if I am wrong anybody but when I went through tech school in the 90's I seem to recall that there was an intention of being able to turn around an in frame OH in a faster time by exchanging out the spacer as a unit. Failed on that dream. Sounds like I was very fortunate.
@misters2837
10 күн бұрын
The biggest place the 3176 was superior to the 3306 was in boats... The highest HP 3306B I have seen, was 370hp~ whereas the 3176C could run 600hp. - But then again, I have no idea if they were grenades or not, I never actually worked on one... The 3208T was 250HP in trucks and 300HP in coaches, and up to 450HP in boats....I can tell you those 450HP 3208's WERE grenades!
@Jethrosgarage
5 ай бұрын
My entire background is marine engines, and 90 percent pleasurecraft, as in the high horsepower ratings- the 3196 was the gateway to the mechanical electronic unit injected engines- the 3196/C12/3412E etc. Now, the old 3300 series was reliable, BUT in yacht generator applications they were dirty and smoky. Nobody wants black soot all over the pristine white yacht or the neighboring pristine white yacht. Lots of "fixes" like specially drilled pistons, catalytic heaters on the mufflers etc, the electronic injection took care of lots of that! The 3208 was great in a 375 horse app but the 425/435 had this giant aftercooler (afterthought?) I HATED. JUNK! I am SO GLAD they are now rare and OUT OF WARRANTY so I don't deal with that crap anymore. :)
@AlReid-n6d
3 ай бұрын
Thank you for this video josh
@nvragn
5 ай бұрын
Correct me if I'm wrong but wasn't a 3176 part mechanical part electric. You may have touched on that because I only watched the first couple minutes so far. I just had to stop and put this comment up. When you are as old as me me you have to write it down so to speak because if I didn't I wouldn't remember. Anything after a few minutes it's gone. K I'm exaggerating but not much past 10 minutes or so it gets sketchy. Dam that one hell of a long comment and or a question. Why didn't I just ask the question about the 3176. That's it that's all. I tend to get rolling and before I even realize it turned into a book. Anyway finally I really enjoy your content 👍🇨🇦🔧
@debi5292
5 ай бұрын
We have a Challenger tractor with the B version of the 3176. At 8K hours it is still going strong. From the sounds of this, I hope it hangs in there for another decade to wear the tractor out. Best tractor we have ever had on the farm by far to date. Would love to try the truck program for the 3176 in this tractor!
@debi5292
5 ай бұрын
If the 3176 fails, can we put a later C12 engine in it, and have all the electronics in the cab still work?
@carlthor91
5 ай бұрын
Reason it lives, is a tractor, like a marine engine. Start it, after it warms, set the power level, and it lives. Vary the throttle, like a truck, and YMWV.
@outdoor044
5 ай бұрын
We have a 75D with the 3176 with 8k hours also. It's a '97 and the engine has been reliable.
@nvragn
5 ай бұрын
Those are the ones that you would see holes in the liners so that's when coolant filters and the DCA came to be. Now because of the different technology it's something that never happens anymore because of it. I'm sure that there are still the odd one where you can see cavitation in the liners but no where near the way it was. Again ty for the good channel I really enjoy it 👍🇨🇦🔧
@jimhoward4749
5 ай бұрын
I had a 3176 in my 93volvo ran good with no problems
@southernapplicator6972
4 ай бұрын
A friend of mine has a Terra gator with an original 3176 and I think it was built in 96. No rebuild still running strong with a slough of hours on it. I’m pretty sure cat used the 3 to represent fuel type in the 4 digit # if I remember right
@gabeunger7232
4 ай бұрын
Had a cat tractor with a 3176 in it. It was a gutless wonder. Cat had it tore apart doing engine work on it at less than 1,000 hours on it.
@murrayashby3470
5 ай бұрын
Got a 3176 in a 140h grader , just done 19,500 hours, the only thing I have done so far is a water pump at 4,000 hours, apart from from that it has never had a spanner touch it 😎
@rongraham797
5 ай бұрын
We've had two 3176 engines for around 20 years. One is in a Cat 75C Challenger, the other in a 375 Peterbilt. Both 1994 models but there are some differences. The Challenger 75C (An Ag tractor) was made with the much larger ECM than the truck. Reliability of the engine in the truck has not been good. We had a cam follower fail and had to pay the local cat dealer to replace cam, spacer deck and related parts. They had the truck 3 months. Two of the brand new cat replacement spacer decks were warped out of spec on arrival to the dealer. Apparently they were very hard to get 10 years ago. I'm guessing there not even supported now. The 75C has been reliable but learned a couple weeks ago that the ECM is leaking. I'm not sure what we're going to do. Between the ECM and labor to reflash I'll probably have over 5K in it.
@EugeneVincentOutdoors
5 ай бұрын
I was trained on the ecap machine. Looked like an odyssey video game from the 80s. Lol. We run these 3176 engines in single axles but they were phased out quickly after I got on board with the company..
@michaelljiljak5926
5 ай бұрын
We had these in CAT R1700 boggers. Good strong reliable engine.
@Hunter-mr8ol
5 ай бұрын
In our tractor 3176 (9ck) the major problem we ran into is the plastic caps on the piston pins break and cause the motor to knock and damage to piston pack. Has happened twice now at 10,000 hours.
@jaredklug3502
5 ай бұрын
I believe our Caterpillar 75c has that engine. Seems fine
@danielmcmunn4784
5 ай бұрын
We have a '95 challenger tractor with the 3176. Not sure what serial number class it falls under, but it has over 11,000 hours (and not easy hours, at that) and has never really been opened up. The only significant engine work I can think of that it ever had was injectors at around 8000 hours
@zachflick3046
5 ай бұрын
Love your channel, keep up the good work. Also I am looking for a 24v c7. What esn suffix would I need to look for? Thank you
@rlfedler
5 ай бұрын
Good video. I wonder how you’d do if you had your own shop … 😉
@scottcurry479
5 ай бұрын
The leasing company that I worked for bought 100 1990 Internation 9400 day cabs with the 3176 in them. The majority of them were dumping coolant into the oil before they even got put in service and Cat was denying warranty on them. Not a good showing for us.
@chrisleggett685
5 ай бұрын
I drove a truck with a 3176 in 2019 until california banned it It was rated @350 hp and 1350 ft lbs iirc. It was a miserable engine. It wouldnt pull any hill with an empty flatbed. Theres no way it put down that kind of power. I had a 1962 pete with an old 280 Cummins with 780 ft lbs that would run circles around the 3176.
@enslavedbytruth
5 ай бұрын
3412 would be favorite CAT engine...can't beat the sound of a V-12....next would be the 3408
@tennesseetrucker9622
5 ай бұрын
The first company I ever drove for had a boat load of KW’s and FreightShakers with those little popcorn engines. They were literally giving them away to the drivers. I opted to not participate but if my memory serves me they were 5yo trucks and if you agreed to drive it for 2 years they’d had you the title. I had a buddy that did and they were so desperate to get them out of the fleet they weren’t even holding the guys to two years. He got his title just over a year in and he said CAT had just rebuilt it. I never heard exactly why they were just giving them away but I always assumed it was because they had zero trade value so why not get some recruiting value out of the trucks.
@2509498788
5 ай бұрын
Educational
@blackmarkettrucking5821
3 ай бұрын
3406 for life!!!!!
@wayneselner3523
5 ай бұрын
Worked on lots of them at Peterbilt .I think it’s a good engine. Would blow the doos off 3306
@travismeehan9633
5 ай бұрын
I have 2 of them I think they are 5ek I have owned them for 20 years. They have been money pits. Always leaking oil head gaskets blowing cams wiped out. Them engines have made me not buy anything from cat again.
@Graveltrucking
5 ай бұрын
The 1990 T450 I drive has a 3176, the engine has well over 1.5 million kilometers. Its not big on power, it pulls like a Cat engine should. Its good on fuel. The jake isn't very strong. The engine had the computer replaced it took 3 months to get one.
@ethanbeier3443
5 ай бұрын
I ran a 3176 that ran decent. But the 9 speed paired with it was pathetic. Especially hauling sugar beets. High gear was useless. I just let it buck 2300 rpm in 8th and held my foot to the floor. All in all I didn’t mind it. It was just gutless and would not fire off without ether. Deffinetly would prefer a 3406 but it wasn’t too bad
@wademills1616
5 ай бұрын
I can’t understand how your favorite engine is a C13. Everyone I know hates that engine. Even truck sales people don’t want them. They can’t sell them.
@4211welderman
5 ай бұрын
Had a customer ( a logger) who had a 3176 , it broke a head if I remember correctly, it’s been 20 plus years ago , we couldn’t find a head , so made a c12 head I believe , fit it , used several parts between the 2 I believe I used the 3176 injectors, really cant remember. Any way I made it run, customer came back to my shop and said I’m not sure what all you did , but there’s nothing out here that will out pull my truck!, no one can out run me !! I said well good but hold on sooner or later there’s going to be a big boom probably, it lasted 2 years I’m guessing around 100,000 miles. And he scraped the truck after that..
@johnnylightning1491
5 ай бұрын
I have a friend with one of these engines that didn't run for several years. He was just idling it one day and it stopped running like it ran out of fuel, I was there I saw it happen. He has since got it running but not right. Does anyone know anyone in the Detroit Michigan area I can refer him to? Thanks. Keep the good stuff coming Josh.
@garyharrington5300
5 ай бұрын
Cat red glue ,I hated that crap ,all it was was rubber cement ,terrible 💩
@joetom7629
5 ай бұрын
I have a ford l9000 with this engine. I had to bypass the fuel lines to the ecm because of an external leak.
@bertgrau3934
5 ай бұрын
The Detroit DD15 doesn't use cam bearings either. Or at least the last I read, they weren't. Around 2020. They didn't.
@dennissmith460
5 ай бұрын
Eaton Fuller RTO 14613.
@ajmurphy5606
5 ай бұрын
Thanks!
@AdeptApe
5 ай бұрын
Thank you so much!
@Fleetsidedieselrepair
2 ай бұрын
I have a motor home with this engine and my dad hooked up the batteries backwards and fried something in the ecm. I bought a used ecm on eBay and it runs. The only issue I have found is there is no throttle response. If anyone has any input that would be great. The motor home is a 1992
@davidwells9342
5 ай бұрын
Very interesting video
@shitindawoodsbear2798
5 ай бұрын
See em in boats all the time. What came out first..3114/3116/3126 mui , 3406E, or 3176/3196?
@justinnickelson4421
16 күн бұрын
is there any way to put a manual temp gauge somewhere to see what the actual temp of the water is? our 3176b temp gauge is going to 200 and a buzzer starts going off all the time but the truck doesn't boil over. we have flushed the system changed the oil cooler because the packing was leaking and still haven't gotten a difference. it doesn't burn oil. it could just need to be overhauled but before jumping off that cliff i'd like to verify its actually running that hot.
@brianbickley8368
5 ай бұрын
Josh, did you know that Deboss is doing retrofits for Edison?
@therealtrucker7564
5 ай бұрын
Did you see the Dickerson custom truck build off truck at mats with the V-12? It would be cool to talk about.
@aw9680
5 ай бұрын
If the only way to justify an engine is to only own it under warranty, that's a bad engine design. Not even considering the lost job time. Was this the beginning of the end for cat road engines?
@someguy4476
5 ай бұрын
Can I ask a question about a CAT engine? I think my charge pipe is missing a clamp…
@billlane8794
Ай бұрын
Do you know any thing about the cat c1.7 turbo engine for mini excavator
@jamesgeorge4874
5 ай бұрын
3208 is just a 636 Ford engine painted yellow. It's parts have Ford engineering and part numbers all over them.
@alexstromberg7696
Ай бұрын
must be so much nicer to work on the metric engines, everything makes sense.
@mattheide2775
5 ай бұрын
I would like to ask if diesel fuel helps lubricate the pistons? I heard this as a kid in a logging town ❤
@brianfrick4931
5 ай бұрын
I’m actually rebuilding a 3176 b in diesel school right now, first diesel I’ve rebuilt by myself and everything about it is so weird to me from everything else I’ve worked on. Everything about it seems so over complicated and poorly designed.
@billhendon1017
5 ай бұрын
Wow!!
@arlinwellsjr.580
5 ай бұрын
My neighbor has one, says it used half the fuel of any other truck he has, but it fried the ECM, and can't get one for it. So he's scrapping it.
@johngoldsmith6629
4 ай бұрын
You can get a ECM, two types. The older ones are very expensive and you have to calibrate the speed timing sensor with a ECAP and timing indicator group. The newer ones are more friendly to work with.
@garyharrington5300
5 ай бұрын
I love the 33 series ,great motors till they made them di ,we got a 140h grader and the boss says put glow plugs on it .isayed ,you can't be serious. Well he was so I educated him😂
@ajmurphy5606
5 ай бұрын
Thanks for the video! What would be the easiest swap? I have a 9ck and absolutely hate it, nothing but problems. Would a c10 or 12 be an easy swap?
@johngoldsmith6629
5 ай бұрын
It would be close to what Cat has. Your 9CK has a forty pin ECM. C10 or C12 is a seventy pin. Cat makes a harness to adapt to the newer engine, or you can make one. Also your old engine the fuel supply is at the rear. The newer engine is at the front. Intake, exhaust piping and radiator hoses might need some work. Go to your Cat dealer and get this document, REHS0416.
@ajmurphy5606
5 ай бұрын
Thank you so much John!
@ajmurphy5606
5 ай бұрын
I am having a hard miss when the engine is up to temp. I removed valve covers to troubleshoot injectors and discovered mayonnaise and unmixed coolant. We water pump is currently leaking so I am going to pull oil pan and pressurize to see if it’s the water pump but I don’t think this would cause the miss. But I don’t want to put new injectors in something contaminated
@ianatkinson8464
5 ай бұрын
😎👍
@zaffo757
5 ай бұрын
Both terrible in marine service. Were replaced in short order.
@peteengard9966
5 ай бұрын
I thought the PEEK engines were the first all electronic Cat engines.
@johngoldsmith6629
5 ай бұрын
The PEEC was the first truck engine, that Cat installed electronics on a mechanical fuel system. So it still has a pump and line system. The 3176, was Cat's first true electronic engine.
@joshwilson849
5 ай бұрын
Can anybody explain what FTS and what FLS settings are?
@johngoldsmith6629
5 ай бұрын
FLS = Full Load Setting or "intercept". It is the HP curve from TEL "Top Engine limit" to rated HP. FTS = Full Torque Setting or "slope". It is the HP curve from Rated HP, RPM to Peak Torque, RPM. So when I test a Cat truck engine on the dyno and do what is called a PAR run. One of the main measurements is fuel rate reading measured in GPH. HP = Fuel rate (GPH) x density (Weight of one gallon of diesel fuel in that tank) divided by BSFC ( Brake Specific Fuel Consumption). So if the fuel rate is low, 0.5 GPH or less on readings at 1800 & 1200 RPM's, I can go online at Cat and enter the info and make an adjustment back to factory setting. If over 0.5 GPH, I can send it to the factory and they can issue new FLS/FTS numbers. On certain engines, usually 475 HP and under, Cat will allow what is called a fuel MAX out. For an extra fee (around $100.00) Cat will put the GPH at max tolerance. If the EUI's are worn, sometimes you might not get a full fuel max out.
@Mega7492
5 ай бұрын
What is the difference between the 3176, 3196, and C12 ? Are the not all the same design ?
@AdeptApe
5 ай бұрын
The 3176 and 3196 were essentially the same other than the 3176 was a 10L truck engine and the 3196 was a 12L equipment engine. The C12 a later version of the 3176 where the block was redesigned and it's a 12 liter engine.
@Mega7492
5 ай бұрын
@@AdeptApe Looking on SIS Web though I see camshaft bearings.
@AdeptApe
5 ай бұрын
Yes, you can have Cam bearings installed if you have a failure of the spacer deck is my understanding. They didn't come with them though.
@gregh.7977
5 ай бұрын
Indeed one of the biggest POS ever built by any manufacturer IMO.
@timkis64
5 ай бұрын
i hated the early E controlled cats.the rpms hung too long when upshifting.if you werent on firm asphalt.the vehicle would slow quicker than the rpms to allow the next gear to engage.a truely dumbass idea for off road dump truck work.
@SarraPiyopiyo
5 ай бұрын
Isn't there a dude that shoehorned a 3176 into a Ford F250?
Пікірлер: 128