Thanks Lonnie. Let me know if you get a chance to try it.
@darkassasin3018
4 жыл бұрын
@@nwprimate6416 hfdunddny
@mangeshkadu381
5 жыл бұрын
Your dog's awesome & the way you started fire, man!! you are an actual survivor. thumbs up!!!
@nwprimate6416
5 жыл бұрын
Thanks!
@chimpchowder5774
5 жыл бұрын
Wow! That makes sense! Elder berry stems and such blackberry yep. Those all got that same center. You sparked an idea for sure! Great! Thanks for sharing what you found!
@nwprimate6416
5 жыл бұрын
Let me know how it works for you! 👍
@pacificbushcraftandfirecra6358
6 жыл бұрын
Certainly did take the spark easily... obvious downside is the fast burn, but the addition of punk wood would help off set that. I am going to go back to that red elderberry patch I found and see about collecting some char gold! As always, very informative and well presented B. Thanks so much for sharing your vast knowledge with us all. Cheers my friend!
@nwprimate6416
6 жыл бұрын
Thanks buddy! Just a reminder that any living portions of the plant will have some cyanide in it, so keep that in mind if you cut any of it green. You wouldn't want to poison yourself cutting a sandwich later in the day. As far as I understand (mostly from uh.its.nathan) any dead dry portions should be safe to handle. Let me know how you make out! 👍
@RamshackleHomesteadKeithandJen
5 жыл бұрын
Nothing better than punkwood! Digging your use of local rock .
@nwprimate6416
5 жыл бұрын
Thanks Keith and Jen!
@MrKulwych
2 жыл бұрын
I know you haven't been very active lately but you made the absolute best friction videos. Hope you're doing well.
@thewimpycamper7692
6 жыл бұрын
Very cool lesson again B! Thank u for shearing!! 😊👍
@nwprimate6416
6 жыл бұрын
Hey I know you! 🙂 Great to see you over here on KZitem.
@stephenwalther9702
Жыл бұрын
You are my favorite on KZitem by far! Thank you for your exceptional videos. 😃
@tarasb.ukrainian1947
6 жыл бұрын
Dang! The Fire Master never runs out of cool ideas.
@nwprimate6416
6 жыл бұрын
😆 Thanks Taras!
@Ddabig40mac
6 жыл бұрын
Now, that, is a turbo ember! Awesome! It didn't even give you a chance to spill the char tin!
@hermit6208
6 жыл бұрын
😂😂😂
@nwprimate6416
6 жыл бұрын
😅👍
@countrywildcampaki7802
6 жыл бұрын
The memory of the previous life revived. excellent ! 👍
@nwprimate6416
6 жыл бұрын
🙂👍
@forestpage1333
6 жыл бұрын
The horse hoof fungus in my area has a very thin "Amadou" layer. So not wanting to waste material, I've charred chunks from the corky inner and lower gill layers and found they catch a spark very well. Love your videos (and your dog).
@jt659
6 жыл бұрын
Nice! I just found some of the horse hoof and was wanting to make the most of it.
@nwprimate6416
6 жыл бұрын
Thanks Forest! I have played around with charring some bracket fungi in my area too, and like you I just charred all of the different layers. I've had mixed results in terms of how easily batches take a spark, with some lighting right up and others taking a lot of work, but once that stuff starts smoldering it is awesome!
@forestpage1333
6 жыл бұрын
I think that the spore layer works better but I need to do some experimenting to prove it. My favorite natural tinder for flint and steel (besides Chaga) is the inner filament of a Milk Weed pod left after the seeds distribute. Works as well a char cloth and I don't see many KZitem videos on it.
@nwprimate6416
6 жыл бұрын
I have heard that milkweed was a good option. I think my buddy Mega Woods Walker has used it if I'm not mistaken. Check out his channel if you're not already familiar. He has lots of great fire videos.
@jt659
6 жыл бұрын
I've never found milkweed here. I've seen milk and I've seen weed but never the actual milkweed plant. I guess we make up for it with a huge amount of cattail...and alligators.
@waltergigandet6715
2 жыл бұрын
Nice!!!! A good teaching, good music!
@mrForestBeard
6 жыл бұрын
Wow! This one catches spark really fast! Thumbs up!
@nwprimate6416
6 жыл бұрын
Thanks buddy!
@samthai818
7 ай бұрын
Wow, that not only did it lit up with a single strike but it completely lit up all the neighboring char pieces almost instantly!
@nwprimate6416
7 ай бұрын
It's a really cool resource
@zoltanvonsomogyi7272
6 жыл бұрын
I want to share one more Yucca stalk story that may be of interest to folks that live where they grow. I was out last weekend doing a bit of wood crafting and bow drilling. My knife had lost it's sharpness and this idea came to me. A split Yucca stalk has a smooth, somewhat spongy interior, and splits rather flat and straight. I sprinkled a hand Full of dirt on it, tipped it on it's side and tapped off the course dirt, leaving fine paticals of dirt stuck to the surface. I then used it as a strop, and low and behold, it began to turn black with 1095 steel particals! It didn't get it razor sharp, but a good edge was restored! I sure love my Yucca 😀
@nwprimate6416
6 жыл бұрын
That is so cool! 👍
@guns4funcajanajustin
6 жыл бұрын
Good stuff with the pith.
@nwprimate6416
6 жыл бұрын
Thanks buddy!
@waveman0
4 жыл бұрын
thanks for this, good tip. I will be keeping my eye out for some in my area here in Australia. Like everything it's a trade off, while it may take a spark easily (and by the demonstration it certainly does that, probably the fastest/easiest I have ever seen) as you say it burns up very quickly. Maybe combine it with char punk wood, have this char pith on top of of char punk wood, so you get the best of both worlds, the spark takes easily and yet the pith will catch on to the punk wood and gives you time to work.
@nwprimate6416
4 жыл бұрын
Great points
@ahorseman4ever1
3 жыл бұрын
I have made char out of bracket fungus or artist conk that I have found on dead birch trees. I cut it up and char it the way you did. It holds a spark a long time and catches a spark just as easy. I like it way better than char cloth. Love your videos!
@nwprimate6416
3 жыл бұрын
Thanks Blake. I've done the same and fungi has a big advantage when it comes to burn time and heat output.
@jerrybrower231
5 жыл бұрын
You are truly amazing when it comes to fire thank you for sharing your knowledge with the rest of us
@nwprimate6416
5 жыл бұрын
Thanks Jerry!
@sishalsept8327
5 жыл бұрын
Excellent! There are a few plants around here that I'm going to try. Thanks for making a video about this. Pithy plants, awesome!
@nwprimate6416
5 жыл бұрын
I'd bet you can find something that works. Burdock is pithy and grows almost everywhere. I haven't tried it, but it seems like it could be a good contender.
@Marianopiras
3 жыл бұрын
I already knew about inner pith , we in Sardinia use Ferula's inner pith , it works very well. Thanks for the video.
@bushcraftsurvivalslovenia5241
6 жыл бұрын
This is a very interesting concept and I have not tought of it. I'll have to search for some pithy stalks today when I'm out. Great video.
@nwprimate6416
6 жыл бұрын
I'll watch for the video! 🙂👍
@fjellboi2391
5 жыл бұрын
Great skill! I always thought something usefull could be done with the pith but never had an idea. Thanks man!
@nwprimate6416
5 жыл бұрын
Thanks buddy! Always great to hear from you. 🙂
@hermit6208
6 жыл бұрын
Hahahahahaha, another video where the Last of the Mohicans theme starts as the fire-making begins! Good stuff, cheers. LOL
@nwprimate6416
6 жыл бұрын
Thanks buddy!
@tycreps6407
5 жыл бұрын
Outstanding! I've always used punky wood and it works well. I'm going to find some plants in my area with pith centers. Great video, thank you sir!
@nwprimate6416
5 жыл бұрын
Thanks Ty. Let me know how it works for you! 👍
@davidkeenan4410
Жыл бұрын
Nice tip thanks. When I make char cloth I use a metal paper clip to hold several pieces together. This keeps it from blowing away;and ASLO you can bend out the clip so the cloth bundle has a handle to place it in the heart of your kindling.
@andreagatti4830
4 жыл бұрын
What a piece of art! If I were asked what to send into space to represent humanity I would suggest this video. Honestly. Cheers from Rome. P.S. The piths of dried topinambur and fenel work as nicely (personally tested).
@jacquiblanchard3131
6 жыл бұрын
That's a cool tip. Thanks for sharing!
@nwprimate6416
6 жыл бұрын
Thanks Jacqui. I know you're always looking for new things to light on fire. 😆
@awanderingman
6 жыл бұрын
Absolutely wonderful! I learn so much from your videos. Thank you (again) for taking the time to make them and share. I'll have to try finding some pithy plants. Your typed info below the video very helpful. -GK
@nwprimate6416
6 жыл бұрын
Thanks John! 🙂
@RiverbendlongbowsOutdoors
6 жыл бұрын
I'm going to try honey suckle here soon. Very good 👍 Any word yet from tribe on spear fishing?
@nwprimate6416
6 жыл бұрын
Let me know how the honeysuckle works. No news on the spear situation yet, but I will do my best. 🙂
@zoltanvonsomogyi7272
6 жыл бұрын
Ok, I tried the Yucca stalk char again, this time with an older, softer piece. I cooked it till the can stoped smoking, and it came out a copper color all the way through. It has a firm, spongy, non-crumbly texture that was easily held on top of the chert stone while I struck it with the steel. It worked very well, but smoked a bit and stank, so I guess it wasn't chared completely, but it worked very well! Good stuff 😁
@nwprimate6416
6 жыл бұрын
Interesting! I like to err on the side of undercharring. As long as it takes a spark, it's charred enough and probably has more burn time than a fully cooked chunk. I appreciate the update buddy! 👍
@stevemcnaughton-kb3jc96
5 жыл бұрын
Very cool, I never thought of that. I'm going to give it a try. Also, Smokey the Lab made sure the fire was out!
@nwprimate6416
4 жыл бұрын
Keep me posted 👍
@williamboyd8146
5 жыл бұрын
OK, your on a different level and plane. Nice work :-)
@nwprimate6416
5 жыл бұрын
Thanks again buddy!
@garyminick1050
6 жыл бұрын
Great job as always !
@nwprimate6416
6 жыл бұрын
Thanks Gary!
@davidharvey5672
6 жыл бұрын
That charred cotton twisted to a rope that you showed us lit this easily too. I'm going to struggle to find the material near me but i do know of a few elder bushes. I took a hand drill spindle from one last week to try but so far i can't even make it go brown it seems to glaze the end . Thanks for another cool video
@nwprimate6416
6 жыл бұрын
Thanks David. Stick with the hand drill and keep in mind that it took me months to get my first ember; and I was pretty good with the bow drill already at that point. Patience, practice, and knowing when to stop to avoid destroying your hands will get you there. As for the char, char cloth is definitely one of the easiest materials to catch a spark with. This stuff seems to be on the same level or better. I made a bunch of batches, and it always lights up in a strike or two.
@davidharvey5672
6 жыл бұрын
@@nwprimate6416 the last time I tried it was so much skin soreness but pain in the joints of my fingers in the palm of my hands. Kept me awake is that what is supposed to happen
@nwprimate6416
6 жыл бұрын
I have torn my skin to shreds and had a bit of bruising in the beginning but never any joint issues. One good tip I picked up somewhere ( I wish I remember so I could give them credit) is to make sure that you are not flexing your hands open too much or you will be stretching the skin and losing some padding. Keeping them somewhat relaxed will give you more cushioning.
@davidharvey5672
6 жыл бұрын
@@nwprimate6416 thankyou
@duxdawg
6 жыл бұрын
Nicely done.
@nwprimate6416
6 жыл бұрын
Thanks buddy!
@ladeda7033
4 жыл бұрын
Pith ! Good stuff ! Sunflowers have huge pith! The stuff lights up easy and lasts several minutes for a 3" piece .
@FelixJager2
6 жыл бұрын
Very, very nice. I lov this Chanel.
@nwprimate6416
6 жыл бұрын
Thanks Petr! 🙂
@kullcraven
Жыл бұрын
Thanks for the vid man, just seen this now. love it and i have not tried plant pith, i will be now. :) ATB.
@johnearhart8811
6 жыл бұрын
Awesome.
@nwprimate6416
6 жыл бұрын
Thanks John!
@rickyoutandabout2765
4 жыл бұрын
Thanks for sharing! Im in the process of trying to learn fire lighting from flint and steel and not sure if my char cloth is good enough, really struggling so i will have to keep an eye out for something like this
@nwprimate6416
4 жыл бұрын
Lots of pithy options out there! 👍
@thomasgold-1000
6 жыл бұрын
Great advice, thanks for that Brian - really like the idea of using it as a “turbo starter” in combination with other charred materials! 👍
@nwprimate6416
6 жыл бұрын
Thanks Thomas! It's good to know people are reading the write-up too. 🙂
@thomasgold-1000
6 жыл бұрын
Always; your write-ups are exquisite... Thanks for all your efforts!
@genefoster9770
3 жыл бұрын
great video great idea and thank you for the music that is one of my favorite tunes of all time especially when the hot violinist plays it she does it very well also see you on the next one
@robbabcock_
6 жыл бұрын
I wish I could give an extra 'like' for the pooch!
@nwprimate6416
6 жыл бұрын
I'll rub his ear for you instead. 👍
@ladeda7033
4 жыл бұрын
Yup , plant pith works real good. Sunflower pit is awesome too! 1" thick gets hot too! Charred tp squished up into 1" balls is SUPER EASY.
@SurvivorMetalMan
6 жыл бұрын
That is awesome brother!
@nwprimate6416
6 жыл бұрын
Thanks buddy!
@mrkutzpws
Жыл бұрын
Another great tip thank you Brian 🙏 Poshrat
@majesticbonsai6464
3 жыл бұрын
Hey man where you been? I have been missing your bushcrafting videos. Any new content expected to come our way?
@nwprimate6416
2 жыл бұрын
Thanks man. More to come. :)
@Wolfram762
5 ай бұрын
That's such an awesome idea!
@jamesvatter5729
4 жыл бұрын
Just one strike and it caught...that's impressive!
@nwprimate6416
4 жыл бұрын
:)
@zoltanvonsomogyi7272
6 жыл бұрын
I mentioned once that Yucca may be good for this. The flower stalks are very pithy, with lots of continuous fibers throughout that may work as a reinforcement. I'll make some soon and let you know!
@nwprimate6416
6 жыл бұрын
Please do! With as well as it works for friction fire, I'm curious about your results charring it.
@zoltanvonsomogyi7272
6 жыл бұрын
@@nwprimate6416 So I chared some Sotol Yucca stalk last night and ended up with pieces about 3/8" × 1/4" × 2 1/2", black completely through with a firm texture to it. I just now knocked some sparks from my Chirt and steel and got a good one to hit a 1" long piece. The red spread quickly resulting in a very hot coal that lasted about four minutes. It works! Thanks for the inspirstion, Mr. Primate 😀 P.S., this was also my first time not using char cloth 😊
@QuantumPyrite_88.9
6 жыл бұрын
Zoltan Von Somogyi - Congrats on your success . Yucca spikes work great for hand drills and bow drill + The flower blossoms rolled in flour and fried are a culinary wonder .
@zoltanvonsomogyi7272
6 жыл бұрын
@@QuantumPyrite_88.9 yes, Yucca hand drills have spoiled me! I don't bother with bowdrill anymore, lol. I have yet to eat the blossoms or pods, but I'll look forward to trying them!
@SongOfWhiteWolf
4 жыл бұрын
I kept waiting for the dog to catch a salmon at the end of the video.... LOL
@boatkid888
4 жыл бұрын
That was Excellent!
@jasonedwardledburynewzeala9897
3 жыл бұрын
I love this video. I love this channel aswell. What is the best time to try and get the pith from the elderberry? Would love some help and info? Thanks jas, frm New Zealand.😁🤘👊🌏
@davemaximillion5501
5 жыл бұрын
Great video, good song to go with it.
@nwprimate6416
5 жыл бұрын
Thanks Dave!
@johngetz8259
4 жыл бұрын
Pretty much the same as "punk char"..which I make frequently. Never thought of using elderberry..which is common around here. A good steel and charring tin and you are set. I like that you used a mountain stone..hard if course..instead if just always reaching for a flint..chirt ..or agate. Good skill for all outdoorsmen..
@nwprimate6416
4 жыл бұрын
Thanks John! :)
@markanderson800
5 жыл бұрын
Question ? If I store Charred Punk Wood in a sealed container, esentialy moisture from air free, will it retain its fire starting properties over time ?
@nwprimate6416
5 жыл бұрын
In my experience the older it gets, the less receptive it is to taking a spark despite my best efforts to keep moist air out. Keeping it in a zip loc bag helps a lot, but refreshing your char by putting the tin on the fire every so often is a great strategy too.
@kylelusk8994
6 жыл бұрын
Love on Lupo for me. Awesome video!
@nwprimate6416
6 жыл бұрын
I'm on it! Thanks Kyle. 🙂
@bishopsblades-anoutdoorfam5991
Жыл бұрын
Hello, I was wondering what brand of strikers you use. The oval one to be descriptive.
@aidancartwright9334
6 ай бұрын
Doggo's the real star of this video
@carls6176
6 жыл бұрын
in the east, Mullein is our pithy go to plant for hand/bow drills and so on.. ever use it?
@nwprimate6416
6 жыл бұрын
It isn't native out here and isn't something I'm likely to run across on accident, but I know a few disturbed areas where it grows. It is by far the best hand drill spindle option I've ever tried. It almost feels like cheating when compared with salmonberry, which I use most often because of it's availability. I would love to find something common in my area that works as well as mullein.
@carls6176
6 жыл бұрын
Dogbane can sorta work in a pinch if you can find a dried straight enough stalk..but you're right - mullein is the best there is out there. I use to ship cut dried stalks & seed heads to friends all over the west coast cause they didn't have it out there and they would ship me salmonberry lol.
@alexxela3950
6 жыл бұрын
Mullein is great .
@nwprimate6416
6 жыл бұрын
Bad trade! 😅👍
@davidf4958
6 жыл бұрын
Think mullein came over from Europe, but it is abundant at places in the Sierras of northern CA. I found it in WA when I lived there and would burn the leaves to clear my sinuses. Not sure where it grew there, maybe Mt Baker in the Cascades. Thanks for another winning video!
@willybee3056
5 жыл бұрын
Tools , can be lost, broken or stolen... But knowedge will last as long as you do... Unless you loose your mind. Tnx for sharing your videos.
@nwprimate6416
5 жыл бұрын
Very true! Thanks Willy. 🙂
@willybee3056
5 жыл бұрын
@@nwprimate6416 Oh,, nice puppy. .. of all the breeds.. the Lab would be my first choice... Now,, to live in the country...😆
@ahorseman4ever1
6 жыл бұрын
I love your channel, how I didn't find it sooner I don't know. Do you teach any classes? I would love to learn more.
@nwprimate6416
6 жыл бұрын
Thanks Blake! I don't teach classes, but have been sharing a lot of info Instagram that you can check out if you're interested...instagram.com/nwprimate/
@sawdust6968
6 жыл бұрын
another brilliant example of fire making skills,ps Love your dog;-)
@nwprimate6416
6 жыл бұрын
Thanks sawdust 69! 🙂
@hermit6208
6 жыл бұрын
Very interesting. You know with the size of the coal, I would think that it would ignite the tinder bundle a lot more quickly, despite the fact that they burn out very rapidly. What did you find in this regard??
@nwprimate6416
6 жыл бұрын
Good observation. I have made and tested a lot of batches of this stuff, and it always seems to burn really hot and fast. This is an asset with a nice dry bundle like the cottonwood bark I used in the video; as just a bit of oxygen led to instant flames; but with a marginal bundle or heavy rain, I think I would want some punk wood backup just in case.
@darkassasin3018
4 жыл бұрын
I have been using this a lot
@rickmellor1076
6 жыл бұрын
Definitely going to try this.. do you think it would make a good spindle?
@nwprimate6416
6 жыл бұрын
It sure does! 🙂 kzitem.info/news/bejne/uG56squZZneHZ4o
@kylewilshusen9898
6 жыл бұрын
Wow, its so cool to watch the char start to burn, like at 2:45. I’ll have to try this sometime...just to watch it burn.
@nwprimate6416
6 жыл бұрын
It is cool looking isn't it? 🙂
@tsedendamba_gankhuyag
3 жыл бұрын
beautiful shape flint striker
@nwprimate6416
3 жыл бұрын
Thanks 👍
@lirnerpublishingnotes
2 жыл бұрын
Awesome ,easy ,so charcoal can take a strike as well as charcloth, nice one. 😀
@exploringbiblicalendtimes779
5 жыл бұрын
thanks for this. Yea I have some wood with this in it. I will get my flint and steel in 6th June so should be great to try out
@nwprimate6416
5 жыл бұрын
Nice! Keep me posted if you remember!
@exploringbiblicalendtimes779
5 жыл бұрын
@@nwprimate6416 Yea I will thanks
@exploringbiblicalendtimes779
5 жыл бұрын
Hi . I charred the spongy part of the wood I found. Then I charred them on the stove in a empty can of tuna. I found it captures an ember just as easily as char cloth. Brilliant. I made a video of me doing it. It took a while to catch the spark but it worked. Heres the video if you want to see it. "flint and steel charred softwood" kzitem.info/news/bejne/0IKKnXeQap2Eapw
@scottnock5241
4 жыл бұрын
Super cool!!!
@ChrisMonroePhoto
4 жыл бұрын
Great video. River rocks that contain water have the potential to explode when used in a fire ring.
@auroraborealisknives4019
6 жыл бұрын
Good job !
@nwprimate6416
6 жыл бұрын
Thanks again! 🙂
@itiswhatitis1775
9 ай бұрын
Which forest do you film in? That environment looks so familiar to Gifford Pinchot.
@gus1911
6 жыл бұрын
One strike. Nice!
@nwprimate6416
6 жыл бұрын
Thanks Gus. That seems to be the norm rather than the exception with this stuff.
@jonnyboat2
3 жыл бұрын
In your description you list things used to make the fire except what you used to make the spark. People new to bushcraft may not know what it was that you were using.
@grantberry7575
6 жыл бұрын
Have to try this out. Had to watch this a few times to see the spark take - it looked too fast! Nice idea
@nwprimate6416
6 жыл бұрын
It's magic stuff! Let me know how you make out with your experiments! 👍
@seanthomasdowd
6 жыл бұрын
Impressive
@nwprimate6416
6 жыл бұрын
Thanks Shawn!
@henrikgraulund5920
8 ай бұрын
Put a small nail or needle into each spongy bit before charring. That might make it blow less in the wind. Other option will be to make a 5 cm piece before peeling off the wood and then only peel the woody outer off about half. The do the charring. Then point spark towards spongy part and as it burns the end with the charred woody part might ignite and burn slower. I will try that.
@ohayogozaimasuyami2128
3 жыл бұрын
fire exist: the dog: rock rock rock
@uncletoad1779
3 жыл бұрын
Thanks for sharing! In my region (middle moderate Europe) and experience, tinder fungus (f. fomentarius, not amadou) uncharred is difficult as tinder, charcloth works well, punkwood is better and elderberry pith is the very best.
@ResilienceOnPurpose
3 жыл бұрын
Damn. That is impressive.
@nwprimate6416
3 жыл бұрын
Thanks buddy! :)
@DamienJoldersma
6 жыл бұрын
Awesome
@nwprimate6416
6 жыл бұрын
Thanks Damien!
@ashleyscheepers6981
4 жыл бұрын
Brilliant
@mattw.433
6 жыл бұрын
What do you use to strike the steel with? Is that flint, or does it not need to be flint? I'm thinking about picking up a flint & steel but am quite new to this way of starting a fire. It seems to be more robust and reusable than other methods.
@nwprimate6416
6 жыл бұрын
I use quartz most often, but there are lots of sparky rocks out there that will work. I did a short write-up in the description of this video that you can check out if you're interested. instagram.com/p/BnZSb_mjE-1/?taken-by=nwprimate
@samuelmarx9321
3 жыл бұрын
please tell me, what is the title of that song you play for the video at the end?
@linklesstennessee2078
6 жыл бұрын
Good information NWP
@nwprimate6416
6 жыл бұрын
Thanks LT!
@bushcraftnorthof6012
6 жыл бұрын
Wonder if I have a similarly useful plant up here.... Cool stuff! Thanks.
@nwprimate6416
6 жыл бұрын
I would bet that you do. I don't know if you can find something that is as easy to process by hand, but it's not too difficult to remove the pith with a knife if you find something promising.
@fartwrangler
4 жыл бұрын
Okay... so you collected a bunch of plant pith, charcoalized in by putting in in a metal can and putting the can IN A FIRE THAT YOU ALREADY HAD BURNING, then you took the charred pith, started it burning with a spark from flint and steel, and used that to fire a handful of tinder. Very cool, but I seem to be missing something here: Couldn't you have just lit the tinder with a smoldering twig from the FIRE THAT YOU ALREADY HAD GOING?
@B-leafer
4 жыл бұрын
clearly, an experienced fireman's dog..
@HalfQ
6 жыл бұрын
wow that does move fast. I could use elder, looks the same.
@nwprimate6416
6 жыл бұрын
Let me know how it works for you! 👍
@HalfQ
6 жыл бұрын
@@nwprimate6416 when I do, I'll try and film it. Thanks man.
@nwprimate6416
6 жыл бұрын
That would be great! 👍
@aieraierduk8623
6 жыл бұрын
Nice idea tank,s
@nwprimate6416
6 жыл бұрын
🙂👍
@MegaDoctor2012
4 жыл бұрын
I now this method. Very good Only in dry
@hemansr3893
6 жыл бұрын
Your always thinking!!!! :>)>
@nwprimate6416
6 жыл бұрын
🙂👍
@fire_x_friction8820
6 жыл бұрын
👍
@nwprimate6416
6 жыл бұрын
🙂
@williamboyd8146
5 жыл бұрын
Seriously NW, one gd strike??? Killin me Brother
@chimpchowder5774
5 жыл бұрын
William Boyd hell yeah. Lots of times it's a one stroke lite even with char or punkwood.
@nwprimate6416
5 жыл бұрын
It took me a long time to get the technique down, but have gotten fairly reliable. Things still go wrong though.
@cupholder7758
2 жыл бұрын
You made charcoal. Wow!
@2adamast
6 жыл бұрын
That's fast. Even in contrast with a big firesteel
Пікірлер: 235