★ I made a skeleton type 2-cylinder dust collector that eliminates the chamber that is difficult to make. It is made inexpensively using ready-made materials.
★ At the home improvement store, the lid of the pail can was not sold separately, but when I searched for it on the NET, the lid was sold separately at a low price. Surprisingly, the price is almost the same as the Y branch pipe used this time. (Tax and shipping not included) www.monotaro.c...
I was worried if it would fit my can, but the Japanese standards are amazing. The lid I bought was a perfect fit for the existing cans.
★ When using multiple cylinders, it is necessary to eliminate as much as possible the elements that cancel the wind flow. So T-tube (cheese) is cheaper, but I dare to choose Y-tube. However, in the case of T-tubes, the pipes of the units do not face each other, so I don't think it can be easily manufactured.
★ I tried to arrange with 2 cylinders, but it was difficult to arrange because the support position and connection port of the unit were decided. We have created a detailed video, so please have a look.
★ The materials used are also explained in the video, including the length and connection status. All parts except the unit are available at home improvement stores.
★ The video consists of 9 videos.
No. 1 "Planning". • No 1「計画編」3気筒集塵機製作図の作成(... , No. 2 to 6 "Production 1 to 5". No.2: • No 2「製作編1」チャンバボックスプロトタ... ,No.3: • No 3「製作編2」既製品ボックスの切断加工... , No.4: • No 4「製作編3」チャンバボックスの塗装前... , No.5: • No.5「製作編4」チャンバボックスの養... , No.6: • No.6「製作編5」蓋補強板の加工~塗装養生... , No. 7 to 8 "Assembly 1 to 2" .No.7:youtu.be/XMT2P...
and No. 9 "Verification" About 2 months after the start of use of the 3-cylinder dust collector Performance verification.: • No 9「検証編」3気筒集塵機使用開始約2ヶ... .
"Video No. 1 to No. 9 that made a 3-cylinder dust collector" digest version. • 「3気筒集塵機を作ってみた NO.1からNO...
★ Consideration
In the case of 3 cylinders, I don't think it can be manufactured without a chamber (composition of piping only). The reason is the composition of the wind. This is because it is meaningless unless the winds coming from the three directions are combined well without canceling each other out. For that purpose, we made a chamber that opens 120 degrees (equilateral triangle). → I think that those who can use (have) a 3D printer can do it more easily.
Production video of 3-cylinder dust collector: • No 1「計画編」3気筒集塵機製作図の作成(...
・ In the case of 2 cylinders, it is possible to eliminate the chamber thanks to this Y tube. I think that few people would like to make a 3-cylinder dust collector by making this chamber by themselves. So, I tried to make a dust collector without a chamber with 2 cylinders that can be realized this time.
・ Looking at the HP of this unit, there is a description of "250W". As usual, it's not detailed there, but I suspect it's the "suction power". As introduced in "Verification", my connected vacuum cleaner has a suction power of 500W (manufacturer display).
Video no.9 "Verification" • No 9「検証編」3気筒集塵機使用開始約2ヶ...
The power consumption of the vacuum cleaner is 1000W. That is the theory that the balance cannot be achieved unless the number exceeds two. Multi-cylinder is a must as long as you are using this vacuum cleaner. Is it so-called "like running with a snorkel"? ..
・ By the way, the unit of "suction work rate" is "W", but it is different from electric power.
・ In the case of 3 cylinders, the upper chamber lid surface was 175 mm and the upper surface of the connecting pipe was 236 mm, but in the case of 2 cylinders, the saddle upper surface was 100 mm. It has become quite compact. The shape is also a skeleton type, so it looks slim. (It is an individual impression)
・The inner diameter of the unit pipe is 25 mm, but this time, by setting the connecting pipe diameter to VP30 (inner diameter 31), it seems that the wind noise is reduced and the suction efficiency is improved.
・ If you would like to make one, please give me a "comment" and I will answer your questions.
★ The design drawing of this volume uses Japanese free software jw-cad. www.jwcad.net/...
★ If you enjoy the video, I would appreciate it if you could give me your impressions and opinions.
Негізгі бет The easiest way to make an off-the-shelf "2-cylinder dust collector".
Пікірлер: 5