Hello Chris The torch arrived yesterday. Thanks again. My grandson is visiting his mother for a few weeks so there will be a little of a delay in getting a photo of him and his new torch. I know he will be thrilled.
@svenjonsson9
4 жыл бұрын
I love your "DON'T DIE" sticker on the Bridgeport- very good advice when working with machinery. :)
@mxizlife
4 жыл бұрын
"Don't die". He didn't, he tapped.😁
@Kevin.L_
4 жыл бұрын
I had seen those but never saw one work. Seeing that it reverses with up pressure explains the benefit. I just tapped 16 M6 holes with a low clutch setting on battery drill yesterday. Thanks for sharing!
@allenhunt3070
3 жыл бұрын
Chris, my new to me 90x head arrived today and I'm looking forward to using it! Pictures and videos don't really convey the size of the 90x! Its way bigger than I thought it would be. Glad to see you get your first lathe paying job!!! Thanks for posting.
@MakeEverything
3 жыл бұрын
It’s an awesome tool!! Huge!!
@traviswalker6831
4 жыл бұрын
Great video! Thank you for making it. I’ve been looking at the Tapmatics and others like them. Also, just made my first auction purchase. Thanks at least in part to you. Got a three head Clausing drill center for $325! Course it was $1100 to ship it to my house, but still. It weighs 5000 pounds. It’s a level of quality I never thought I could afford. Thanks again for the video, and keep up the good work!
@MakeEverything
4 жыл бұрын
Travis Walker Awesome!! Congrats!!!
@protect.your.digits.creations
4 жыл бұрын
Great video Chris . Answered my question about reversing to break the chip. Stay Well my friend
@mikewieggers6337
4 жыл бұрын
Where I work we have 3 of these in various sizes for the drill presses, plus one attached to a hand drill (up to 1/2"-13NC). That one can play havoc on your wrists if you're not careful. But it makes it easier for tapping large items like 6" square tube with 1/4" wall thickness that is 15' long.
@imkindofabigdeal4308
4 жыл бұрын
Had this very conversation with Matt at Precision Matthews yesterday. Have a PM-1054 on order (single phase) and then saw videos showing this crazy hit the reverse button just in time to tap thing. "Crap...need 3-phase." Matt says - Google Tapmatic. Great video. Super helpful to see this thing in action. Best of luck on the startup Chris. Right there with you.
@Bigwingrider1800
4 жыл бұрын
MAN..I CAN SMELL THE TAP MAGIC FROM HERE..
@MakeEverything
4 жыл бұрын
I smell it in my dreams
@FredMcIntyre
4 жыл бұрын
Awesome stuff Chris! 😃👍🏻👊🏻
@jamescole3152
2 жыл бұрын
Nice video. Now have you thought about using the tapmatic with a die? What I am saying is put the rod into the tapmatic and mount the die on the vice on your drill press. I don't own one so I'm not sure how the rod would hold in the tapmatic. You didn't show that part but it seems like it might work. What I need is aluminum rod 3/8th with some threads on one end.
@IroncloudMetalworks
3 жыл бұрын
nice demo!!! doing that by hand would suck!! Gun tap would be great for this job -- but not if you're only making 8 of them. Very cool job and great work at getting your customers to pay for your tool addiction -- that's the best part :)
@Scottforyoutube
2 жыл бұрын
Great video thanks! Do you know if the arbors on these all thread into the tapping head? If you buy one on ebay with an MT4 for example but want to put in a straight shank arbor can you just thread the old one out and put a new one in? TIA
@craigtate5930
4 жыл бұрын
Tool buying addiction. Lol. Man I know the feeling
@LongBeachRunner
4 жыл бұрын
The good feels when you use your tools for a paying job :) Great work brotha
@craigroberts2483
2 жыл бұрын
Hello. I have two tapmatics (50x and a 30 TC/DC). I have just acquired them. My question is what collets (rubber) do I need to cover the range of the 50x and what collets do I need to cover the range of the 30 TC/DC? I see you can purchase the collets but they are reasonably expensive and I don't want to buy any more than necessary. Regards.
@justinr8958
4 жыл бұрын
haha came up on my reccomended , i was like wait thats chris zep ....... MASS BMX SHOW SON
@MakeEverything
4 жыл бұрын
Justin Ramirez 😉😉😉
@TomSommer
4 жыл бұрын
Loved it. So cool. Keep up the good videos. Thank you!
@mattberg916
4 жыл бұрын
Will the Tap-matic work horizontally? Could you set it up in the lathe tailstock?
@MakeEverything
4 жыл бұрын
Matt Berg I don’t think so, it relies on the spindle moving to operate, I think if the spindle was locked in a chuck it would bind up, but maybe worth a try
@krause907
3 жыл бұрын
Great video! Do you have any suggestions for 3/4” pipe thread? Will this mechanism be able to handle that amount of torque?
@jamescole3152
2 жыл бұрын
His goes up to 1.5 inches.
@bjorker40
3 ай бұрын
Excellent video
@kenthawkins2418
4 жыл бұрын
It was hard enough knowing how much you can do with a Bridgeport,( when you don't have one)...but NOW I really am envious. That thing will spoil ya!
@dynamicequilibrium5322
4 жыл бұрын
The funny thing is a tapping head like that costs more than I paid for my bridgeport.
@joe_preston
3 жыл бұрын
You can run a tapping head on a drill press too though. often quicker as well!
@TailEndCustoms
4 жыл бұрын
Sure makes things easy for sure
@sonoman00ify
Жыл бұрын
Do you have any idea if that will work on my mag drill. I have a Dewalt mag drill. Not sure the chuck attachment is same???
@splained5398
4 жыл бұрын
Holy shite! The tap is almost a foot away from the spindle nose!
@o-leg
4 жыл бұрын
We love your Videos! You actually inspire me everyday to make my own Projects and try things out for my self. Thank you for the content, keep it coming. I actually just posted a video on my own channel making my own mud flaps for my truck, would love for you to check it out! Thank you!
@rodneykiemele4721
4 жыл бұрын
You need to show taking one apart, would love to see how one works. Thanks
@idahobob173
4 жыл бұрын
By the time it takes to set up the Tapmatic, the holes could have easily been tapped while still on the lathe. No changing set ups. Easy peasey.
@miguelmuniz8742
3 жыл бұрын
What kinda stainless is this?
@christinakellis1155
4 жыл бұрын
I like it!
@richardbradley961
4 жыл бұрын
HAVENT EVER SEEN A BRIDGPORT LIKE YOURS, WHAT AGE IS IT?. REGARDS.
@Roadkillstew
4 жыл бұрын
weve always used them on a drill press
@MakeEverything
4 жыл бұрын
I use mine on the drill press too, but this side tap throws a LOT of torque so i feel safe in my bridgeport
@ozisnice
4 жыл бұрын
Have you ever used one in a lathe?
@wetdedstuocm
4 жыл бұрын
One has to like Tapmatic...
@4rnorthwest
4 жыл бұрын
129 thousand followers!?😦 that’s gotta help the tool buying addiction at least! 😑
@casycasy5199
4 жыл бұрын
so cool
@fiorevitola880
4 жыл бұрын
Why not do the whole operation with the lathe?
@MakeEverything
4 жыл бұрын
In my experience, and with my workflow this was the fastest and safest way to do it. Ive never had good luck power tapping in the lathe, and setting up to cut internal threads would have taken too long.
@airgunningyup
4 жыл бұрын
if he has the torque on the lathe to push that tap , and a way to hold that tap , then agreed.
@fiorevitola880
4 жыл бұрын
@@airgunningyup I do and I do many operations with SS tap and die, But I guess if you have several hundred $$$ to spend. Well then okay.
@Kami8705
4 жыл бұрын
If you have the tooling, it could be quick. You're assuming he has the proper threading tool with a long enough reach. I would assume you could use the tapmatic on the lathe too, but wouldnt be much faster
@Steelcrafted
4 жыл бұрын
Ever tried a spiral point tap? They push the chip forward through the hole, so they don't get stuck in the flutes....I did some 3/8 holes in thick stainless blocks, just held in a drill chuck (in the mill) and it cut like butter....reversed no problem....I agree that power tapping in a lathe is a huge pain, using the mill is the right call....
@TheProfesionalGamerGGN
2 жыл бұрын
This is horrible.....just power tap on the mill alone....what a waste of money....love the don't die sticker
@petermunarin9884
4 жыл бұрын
That's a $4000 tapping head......
@janeblogs324
4 жыл бұрын
Phew mine was free. Someone left it on a drill I bought
@philippalmer7814
4 жыл бұрын
No gloves on the lathe. Work safe and keep all your parts.
Пікірлер: 58