Thanks for all that you do for the Vw industry! Bad Ass Quality Caftsmanship. The videos are awesome!
@brenthale3652
2 жыл бұрын
i NEED ONE FOR MY 1970 SQBK. IM IN ORANGE , OC CA
@jonmarshall9237
6 ай бұрын
Absolutely beautiful piece of artwork my 66 has been sitting for about five years and I wish I could afford to have one of these friends put on. I want to drive it again. It’s got really really old school technology and a hack job on lowering it maybe someday, love your channel very informative and through my progression of healing from pancreatic cancer. I love watching anything VW specially your channel kudos to you guys.
@jharn7514
11 ай бұрын
Where is this chassis rebuild contest?
@Foleymech
2 жыл бұрын
I need one for my 73 thing I need guidance though please contact me. I just ordered a prebuilt steering box.
@AirkewldVWs
2 жыл бұрын
send me an email to help@airkewld.com and we can figure it out for you Tim!
@jaredjohnston4726
2 жыл бұрын
You guys don't use steering stops?
@unabonger777
6 ай бұрын
what is that orange vehicle at 0:30 ? I feel like I have seen one of those before...
@AirkewldVWs
6 ай бұрын
Fridolin
@RicardoLopez-cx7kr
4 жыл бұрын
Es un estupendo trabajo.. desafortudamente vivo en Mexico y no hacen envios.. 😔
@ronniethode8036
2 жыл бұрын
Like your video how did you square square up the tie rods I didn't see that video part of it thanks
@AirkewldVWs
2 жыл бұрын
Thanks for the comment Ronnie, I used a carpenters square across the face of the spindle and referenced the 90 degree angle to the tubes of the beam.
@jeffburman7832
2 жыл бұрын
Hey! I want one under my car!
@tonylayne5726
3 жыл бұрын
Came here to lean something and got a crappy music video 🤔
@AirkewldVWs
3 жыл бұрын
There is that cute little Mute button you can hit and still learn....don't burn that 1 calorie though.
@jeffsmith2144
3 жыл бұрын
My ultimate wish. Superb workmanship and presentation. ✊
@addictivecode
28 күн бұрын
This is great. Thank you for the details, including the "initial" alignment steps to get it close. I have a stage 2 beam which I am putting leafs back in, and this was exactly what I needed as a reference.
@boonslayer-kn8iy
Жыл бұрын
can me buy it
@AirkooledKustoms
3 жыл бұрын
good vid pete
@kfowler567
2 жыл бұрын
I need this!
@valdisj.riekstins5292
Күн бұрын
Let’s say I have a 1970 beetle sedan, and I wanted a new front end like this with disc brakes for stock ride height. Can you give me an estimate on cost?
@AirkewldVWs
Күн бұрын
Yes. Please send us an email to help@airkewld.com and we can provide a quote.
@jimcallahan5174
Жыл бұрын
I have only watched a handful of Airkewld videos to this point, this one was excellent! Five STARS. Just happens to be right where I'm at in my Thing project, so very applicable and informative. Thanks!
@johnklink4825
2 жыл бұрын
I want it!
@mexicodiaz9878
2 жыл бұрын
Chingón !!!!!
@bobyk87
Жыл бұрын
I lost myself in time watching you. I just wanna learn how this front air vw suspension / steering works. Thank you!
@johnklink4825
2 жыл бұрын
I want it
@evandrogoltz2166
3 жыл бұрын
I don't have big boobs... ahuehfuaheufhauehfuahef... Literally. Great work!
@rstack8985
Жыл бұрын
Awesome thanks for sharing Great info yes l would love one for my 68 bug 😎👍
@sdfilmfolks
Жыл бұрын
So yea. You’re a bad ass and make bad ass stuff. And I totally needed this video right this second. Thank you. Keep it up.
@gregboswell2843
3 жыл бұрын
That sticker at the end says it all and makes it all worthwhile. The channel is growing. About to blow up soon. These vids are awesome and incredibly well done.
@davidkline4372
2 жыл бұрын
You've got to be kidding me...
@williamford9572
4 жыл бұрын
I’m in, would look great on my rebuild of a 1970 dune buggy. I’ll though I would need it in Florida Gator Orange!
@Splashdown99
4 жыл бұрын
Hell yes, I want one! That will look amazing with your Bad Brakes kit that was just delivered yesterday.
@AirkewldVWs
4 жыл бұрын
We can make it happen Julius!
@markmummery
Жыл бұрын
Love to have one for my 64 Vw
@AirkewldVWs
Жыл бұрын
We can help Mark. 623-518-3537 if you want to discuss it.
@joekegg
3 жыл бұрын
This has been on my wish list for awhile, maybe I’ll win it for my ‘71 Bug. I’ll get one this year either way. Airkewld rocks!
@rfdave3980
3 жыл бұрын
Music too loud and I don't like the music. Nice work though
@angelcruz-pr8xg
Жыл бұрын
Que marca de amortiguadores uso
@AirkewldVWs
Жыл бұрын
Ridetech and a private label brand made for our specs. Ridetech y una marca privada hecha para nuestras especificaciones.
@willieshaw2522
3 жыл бұрын
Neat video for what looks to be quality parts. As a small FYI - when you run the jamb nut on, screw the tie rod end in, and then put the anti seize on the male threads - the first couple threads on the tie rod end stay dry, along with the innermost threads in the sleeve and the jamb nut threads. If you put a little anti seize on the tie rod threads before running the jamb nut on, and in the sleeve on the female threads before threading the tie rod end in - it coats all the tie rod end threads, the innermost sleeve threads, and the jamb nut threads. While this may not be an issue on some builds, coming from a rust state, I've learned to try to lube and protect threaded parts as well as possible.
@isralion5823
3 жыл бұрын
Hola que tal, me encanta como quedo, es un sueño para mi hacerle eso a mi carro VW 67, saludos desde México Ciudad.
@robcox9571
3 жыл бұрын
Another great video Pete, I'm saving up for my own. Thanks for the info!
@fernandoalers9691
4 жыл бұрын
How do we get in contact. I live in Vegas and would really like to put this in my chenoweth buggy
@franciscoalvarez9409
Жыл бұрын
Donde están ubicados
@AirkewldVWs
Жыл бұрын
www.airkewld.com/Contact-Us-s/2127.htm
@littlelarry2912
2 жыл бұрын
Please make this and disc brakes for Bay window Bus. We've used your front end and front/rear brakes on our Beetle and love it ! Restoring a Bay Window right now and realized you don't have anything for 68-70 Bus.
@AirkewldVWs
2 жыл бұрын
Sorry Larry, we decided against doing products specific to the Bay.
@tonygreen3528
3 жыл бұрын
I would love that beam on my Red Baron bug, 🇬🇧🇬🇧
@artpereira
4 жыл бұрын
You beetle guys in the US are so lucky. Here in sSouth Africa we have to deal with reconditioned backyard jobs and they all use crap parts.
@cobusvanniekerk83
4 жыл бұрын
Here in south Africa the currency of the rand dollar is killing us we can't afford it
@artpereira
4 жыл бұрын
Cobus Van Niekerk absolutely
@mikescudder4621
3 ай бұрын
Recondition one yourself with quality parts. Thats what i´m doing.... from Brazil.
@tonymedeiros8029
8 ай бұрын
HI gents, watched the video, very nice! I have a VW Type 3 1972, I'm trying to finish the renovation, and starting to look for a Better than stock Suspension package, front and rear. what is a Rough estimate of the cost for the vehicle. Thanks for the inspiration.
@AirkewldVWs
8 ай бұрын
www.airkewld.com/Articles.asp?ID=357 We stopped making parts for the Type 3 last year Tony but you can subscribe to our list and if we get enough interested parties, we will move forward.
@goolsie
2 жыл бұрын
Fantastic video. First of your videos I’ve watched and now subscribed! I have a standard 76 beetle front end with tyre hitting upper left torsion arm at right full lock (1 1/4 turns). Clearance in the left lock (1 1/2 turns) is ok. I was checking the arms on your video thinking the wrong arms are on mine but all looks ok. …any clues please? Coming to you from Australia.
@AirkewldVWs
2 жыл бұрын
Split the revolutions of your steering wheel in half. Then align the car with out moving the steering wheel so you have 1 3/8 on each side. Then remount the steering wheel so it is straight. Then you will have the same amount to turns left to right and right to left. If you still touch, then the offset of the wheels is too great for the vehicle and a space might be needed should you still want to run the same wheels.
1967 VW Bug. What is your tube thickness for the cross tubes? I hope their thickness is a little better than stock.
@AirkewldVWs
4 ай бұрын
.120 wall DOM - www.airkewld.com/Stage-1-PRObuilt-Adjustable-Beam-Complete-2200-p/2200.htm
@dinopap8224
3 ай бұрын
you are love what your doing .and i love your clean job
@AirkewldVWs
3 ай бұрын
Thanks Dino
@mikebriere7531
4 жыл бұрын
You guys rock. Would love this front end in my 66 Bug !
@bsingaround1005
3 жыл бұрын
That is one sexy looking beam.
@jerrygrubbs6800
Жыл бұрын
What does a beam like that cost?
@AirkewldVWs
Жыл бұрын
Hey Jerry, they have different costs. Link to our PRObuilt Beam is here - www.airkewld.com/PRObuilt-Beams-s/2486.htm If you have specific questions as it pertains to your build, shoot me a text or call to 623-518-3537 and I can help you with those.
@jerrygrubbs6800
Жыл бұрын
@@AirkewldVWs thanks, I'll check it out
@silverfox8915
3 жыл бұрын
do you build for righthand drive?
@AirkewldVWs
3 жыл бұрын
Absolutely.
@hayyarbrough
4 жыл бұрын
Man that thing looks awesome✌🏼✌🏼✌🏼✌🏼🏁🏁🏁🏁🏁
@borna430
3 жыл бұрын
What's up with this. you never showed how to place that steering box on at the correct angle. No good, but excellent you deserve 1 million thumbs up ,
@AirkewldVWs
3 жыл бұрын
You don’t need to because it has pins to locate it.
@ShaneClaffeyMedia
3 жыл бұрын
I’m finally going about putting my beam back into the car and almost forgetting where I’m at, this has been massively helpful! What is the thread size on the grease fittings in the beam? Mine weren’t blocked off when going for powder coating and just want to cut the powder back out!
@AirkewldVWs
3 жыл бұрын
8mm x 1.00
@georgehays4900
Жыл бұрын
Maybe you should consider going to a class to learn how to do videos or public speaking, instructing.
@AirkewldVWs
Жыл бұрын
Mute button works pretty good 👍🏻
@charlesmcmillan8324
4 жыл бұрын
Now I just need to get a bug so I can get one of these xD
@warrenwoodland2952
4 жыл бұрын
Would so love to put one under my new gotten bus.
@k.d.5557
4 жыл бұрын
Bought your 4" narrowed beam and starting to install it. This has been a tremendous help as this is my first time attempting. Thank you for video demo. Stay safe.
@AirkewldVWs
4 жыл бұрын
Thx Kirk!
@dvancleve
4 жыл бұрын
I would LOVE to win an Ultimate Beam 👍
@cobusvanniekerk83
4 жыл бұрын
It's just a dream for me very nice
@steverizzuto6497
4 жыл бұрын
Do you build fron ends for Type 181
@AirkewldVWs
4 жыл бұрын
No problem. Like this - www.airkewld.com/Stage-1-PRObuilt-Lifted-Beam-Complete-2204-p/2204.htm
@hamishmcfenda4197
3 жыл бұрын
Sorry for my ignorance...a tortion bar is not required on this beam? Thanks.
Waiting on mine, can you do a video on proper way to adjust ride height ?
@AirkewldVWs
4 жыл бұрын
I will put one together in the coming days Ronny! Thanks for the business!
@glennruiz9494
Жыл бұрын
Would like one for my 65 how do I get 1 and what does it cost
@AirkewldVWs
Жыл бұрын
Hello Glenn, thanks for commenting! Here is a link for the 65 application - www.airkewld.com/Stage-1-PRObuilt-Adjustable-Beam-Complete-2201-p/2201.htm If you want to discuss options, give me a call or drop me a message at +1(623)518-3537 or youtube@airkewld.com and we can make it happen for you! Happy Holidays!
@ricklarner9263
2 жыл бұрын
SERIOUSLY amazing, thanks....afraid to see the price, but really amazing!
@ricapache1
3 жыл бұрын
I need one for my 65 🤙🏼
@PL-tm1tq
4 жыл бұрын
I'm ready for mine. King/link pin for the win!
@AirkewldVWs
4 жыл бұрын
Let's do it!
@mattlee007
2 жыл бұрын
WOW beautiful
@davidkline4372
2 жыл бұрын
Airkewld army?
@jostrander71
3 жыл бұрын
Yes please.
@MarkLoves2Fly
2 жыл бұрын
Very Nice
@alexandregoncalves5585
3 жыл бұрын
Show de bola parabéns 👏👏👏
@patrickossowski5632
10 ай бұрын
super clean
@omarkuika
2 жыл бұрын
Cuando Valera ese kit , espero queno más de lo que vale un carrion de esos
@AirkewldVWs
2 жыл бұрын
Los VW siempre se aprecian en dinero si le pones las piezas correctas.
@fakhroo5
Жыл бұрын
Beautiful
@SteveBlack-kj3pm
4 жыл бұрын
Un gran video. Gracias
@cesarcastillo2348
Жыл бұрын
Badass beam outstanding job need to grab one,just got my first vw ever have a 67ghia.
Find your model and pricing here - www.airkewld.com/PRObuilt-Beams-s/2486.htm
@ronb8052
Жыл бұрын
I've never seen such a detailed, professional build....EVER...and I've been building cars a lot of years. AMAZING DETAIL.
@AirkewldVWs
Жыл бұрын
Wow, thanks!
@danielhodge2897
2 жыл бұрын
Life long VW nut here. I'm finally building my '69 Beetle the way that I've wanted it to be since 3 decades ago. I am absolutely buying one of your beams! You'll hear from me soon!! Thanks for what you are doing for our industry.
@AirkewldVWs
2 жыл бұрын
Thanks Daniel!
@nickrodriguez7293
2 жыл бұрын
What would I be looking at for a 61 Karmann Ghia with 5x205, rotors drop spindles, ball joints
@AirkewldVWs
2 жыл бұрын
Hey 👋🏻 Nick, thanks for the comment. We are currently out of brakes at the moment but hope to have them in the next couple of months. The beam can be found here www.airkewld.com/Stage-1-PRObuilt-Adjustable-Beam-Complete-2201-p/2201.htm Let me know if you have any questions and thanks for watching. Hope you are subscribed 😜
Пікірлер: 199