I wanted a dust shoe that have a easy access to tool change and something that kind of float on the surface. And I have seen shoes with long brush that sucked in by the vacuum. I think I have the solution too all that here. My DIY Floating Dust Shoe How To video.
Music - ”Killers” by Josh Woodward. Free download: joshwoodward.com/
VCarve files Link: drive.google.c...
Clamp Part Vectors Link: drive.google.c...
Middle part Vectors Link: drive.google.c...
Brush Part Vectors Link: drive.google.c...
All parts in DXF: drive.google.c...
Here is links to the Swedish stores were I bought the material for the shoe. You can search on eBay for steering gear boot and door sealing brush or door bottom sweep as well.
www.biltema.se/...
www.jula.se/ca...
www.biltema.se/...
www.clasohlson...
Tool data for this project.
3mm single flute end mill.
Spindle speed 18000 r.p.m.
Feed Rate 1800 mm/min.
Plunge Rate 900 mm/min
Pass Depth 1.5 mm.
Stepover 1.2 mm.
6mm Single Flute end mill
Spindle speed 18000 r.p.m.
Feed Rate 1800 mm/min
Plunge Rate 900 mm/min
Pass Depth 1.5 mm.
Stepover 2.4 mm
90 degree 10 mm V-bit
Spindle Speed 18000 r.p.m.
Feed Rate 1800 mm/min.
Plunge Rate 900 mm/min
Pass Depth 1.5 mm.
Final Pass Stepover 0.21 mm.
Clearance Pass Stepover 2.5 mm
Негізгі бет The Floating Dust Shoe (The very best dust shoe out there?) VCarve tutorial.
Пікірлер: 142