▼EXPAND FOR TOOL LINKS and INFO▼ Watch Next = First Router You Should Buy - kzitem.info/news/bejne/sGh4m5l7gYeoi6w PLANS use code SPINDLE to save 20% off: www.731woodworks.com/store WEN Spindle and Belt Sander - amzn.to/3LWTved WEN Spindle Sander - amzn.to/42HtreB Ridgid Spindle and Belt Sander - homedepot.sjv.io/xkkW3k Extra WEN Sanding Sleeves - amzn.to/41reRq6 Extra Sanding Belts - amzn.to/42GKQU2 Sanding Eraser - amzn.to/3LVvncb Festool Dust Extractor I Use - amzn.to/42jmGiJ Ariat boots I wear (super comfortable) - ariat.dkkdet.net/vNDPDv Check this video's description for links to all the videos I discussed. If you use one of these Amazon and other affiliate links, I may receive a commission Some other useful links: Daily Tool Deals on my website: www.731woodworks.com/tool-deals Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter Check out our easy-to-follow woodworking plans: www.731woodworks.com/store Outlaw's Board Butter - So Good it Should be Outlawed: www.731woodworks.com/store/boardbutter
@davidwalser462
Жыл бұрын
I've had the Ridgid sander for close to 5 years. It's served me well. Since I bought mine, a number of companies, such as Grizzly, WEN, and Harbor Freight, have released smaller-footprint versions of the sander. As was pointed out in the video, the difference is size isn't that great. For a lot of things, Ridgid's larger table won't be a benefit. However, I prefer Ridgid's larger table for how I use the sander. I frequently use the larger end of the belt sander to sand the concave parts of a project and then use the flat part of the belt sander to sand the flat and convex parts. On most projects, this allows me to just use the belt sander. I seldom use the spindle sander (but having the various spindles often comes in handy). If you look at the Ridgid sander, you'll see that the belt is not mounted in the center of the table from left to right. Instead, the belt sander is shifted toward the right, leaving much more room on the big end of the belt sander. Since I'm frequently using that end for contour sanding, having more room at that end to support the work is a huge plus for me. I agree that the dust collection on the Ridgid sander is poor. That's not an issue for me. Since the WEN sander's 'better' dust collection only raises to the level of mediocre from poor, I'd be wearing some sort of dust mask when using either sander.
@mrgunn2726
Жыл бұрын
Never change 731, providing tool recommendations for all income and skill levels is very much appreciated. I have unsubscribed to a lot of 'popular' wood working KZitemrs b/c as they succeeded they started to focus on the most expensive tools and gadgets, forgetting that not everyone can afford or needs them. Their sites seem to devolve into a narcissistic exercises; Look at me and my expensive tools. Appreciate you, stay humble, God bless 👊
@731Woodworks
Жыл бұрын
Thank you Mr Gunn!
@Shannon-v3r
Жыл бұрын
Purchased mine based on your alert for the deal. This is something I should have bought a long time ago. Kind of glad I didn’t buy the ridgid. It’s great for getting close to your template lines, making the router table safer and not as taxing on your bits. I have a Camvac 90l hooked up to it so that makes anything have good dust collection, I’m not sure how well a shop vac would do but suspect it would be fine. I’ve made some clip boards and this makes sanding the edges so much better than using my ROS, and rounding the corners is a dream compared to my old methods. So so so glad I finally have one and I’ve only had it for a few days
@mariah2499
3 ай бұрын
I learned more from you about using my ‘green’ machine than I did by searching for “unboxing” videos of the green machine itself. Thanks for your great videos!
@731Woodworks
3 ай бұрын
Glad to hear it!
@indigo_wolf3574
Жыл бұрын
Almost a part for part clone, is the Triton TSPST450 3.5A Oscillating Spindle and Belt Sander. The biggest difference is that the front drop section of the table is metal rather than plastic. Normally, runs would $259. I snagged it for $199 with free shipping during a pretty insane sale. HUGLEY recommend getting an Abrasive (Rubber) Cleaning Stick for Sanding Belts & Discs, if you get one of these. . If you are working with with large pieces that are too large to wrestle onto the table of the sander. Both Triton ($130) and HValley ($90) (formerly MLCS) make a hand held spindle sander.
@nholly86
Жыл бұрын
Always appreciate you reviewing products that are not sold at the big box stores. Also, the comparison of features are great!
@dojifly
Ай бұрын
Thanks for all you do my friend
@p24t
Жыл бұрын
My shop is small, and most tools don't have dedicated locations. I haven't broken out my standard belt/disc sander since I got the oscillating spindle/belt sander. It does almost as much as the classic does, plus more - and more importantly it's WAY lighter so it's much easier to relocate.
@chasingwaterfalls648
Жыл бұрын
I bought a wren 12 1/2 inch planer and I absolutely love it. I haven’t had no problems yet. I’ve been using it for around two years.
@eloscuro704
Жыл бұрын
I have that same one. And with a simple home made sled, it functions as a jointer too. All the sled is is a piece of plywood with fence that at the front of the board being jointed, like a bench hook. Then you use shims to support all twists and bows in the wood. When you are planing, the work pushes the sled through with it. And it gets that first face flat, better than most small bench top jointers.
@number1pappy
Жыл бұрын
I have an old craftsman oscillating sander I got at a garage sale for $20 bucks. I wasn't even looking for one, but at 20 bucks, it was a no-brainer . Unfortunately, it doesn't have a belt sander. I googled this Wen sander, and it appears it's sold by several different brand names, so I have zero doubt it's a good one. I'll definitely look at this one when my old Craftsman finally gives up the ghost. It would definitely be nice to also have a belt sander attached. I'm litterly clamping my portable belt sander down to use it when it's needed. Lol!
@littlejimmy7402
Жыл бұрын
I recently picked up the Wen sander. I'm working on some shop upgrades and I'm getting a little fancier. I've used steel rods to hang tools from for a while. I'm building a wooden bracket to hold a orbital sander and router with steel rods extending from the back to hold up other tools. I've been getting back into some light woodworking, it's so good.
@lauramarshall6376
Жыл бұрын
I got a Wen spindle sander, as well as a Wen helical blade planer, for Christmas. I chose those (Santa brought what I asked for) because of reviews of both. I love them both. I've used the Ridgid spindle sander and the DeWalt 735 planer. I prefer the Wen planer for sure, and the sander has been awesome! Thanks for your review.
@JoshD4PREZ
Жыл бұрын
How do you like the helical blades? They look like they would cut a much more consistent cut compared to regular planer knives, and I’ve heard you can rotate them up to 4 times b4 sharpening? I went with the Hercules planer from harbor freight, it seemed beefier than all the other bladed planers & was the only locking head, 3 blade one I could find in that price range. It’s loud asf and it’s a beast. But dust collection is amazing with both 2” & 4” outlets on the back. I’ll probably always wonder if I’d been better off getting a helical one lol.. I guess there’s always a chance to go helical when I buy a jointer 😂 ah the never ending list of tools haha
@chashint1
Жыл бұрын
I have had the Ridgid for several years. I do not like the knob on the spindle, it is bigger than the two smallest sleeves, since it is left hand threads it’s hard to replace with a nut. That nut interferes with taller pieces. I noticed the Wen spins in the opposite direction and even though it too has an oversized knob it is right hand threads so a nut can be easily swapped. When I was building boxes and making wood hinges I used the Ridgid a lot, since I have started building bigger pieces it has sat in the corner for the past few years. I am not replacing the Ridgid, but if I was in the market for an entry level machine the Wen looks as good as any of the others.
@susanb8354
Жыл бұрын
I enjoy watching your videos and saw your complaint about the knob getting stuck on the spindle. There’s another KZitem channel, ARTyRV, who advises to put milk of magnesia on the threads of the grinder knob which he uses on his glass grinder. He says that solves the problem. He builds large stained glass windows and does blown glass. He’s worked with stained glass and grinders for more than 35 years so he knows what he’s talking about. Of course, he’s dealing with glass dust and you with fine wood dust but it’s worth a try. I will probably buy a Wen drill press thanks to your recommendations.
@peteg4526
3 ай бұрын
I lost the little nylon drive washer on mine. It’s only held in place by either the belt sander assembly or by a sanding drum. If you’re using a flip top cart the part is easy to lose. Getting a replacement part is turning out to be very difficult and may be impossible. I looked for the same part on the Ridgid website but the Ridgid part is obviously different. But the Ridgid part is available, and in stock. It’s things like this that make buying Ridgid suddenly much less expensive. Two years ago I bought some replacement parts for a 20+ year old Ridgid Shop Vac. I’m not a huge Home Depot fan but they do stand strongly behind their Ridgid tools.
@jakeramey7031
Жыл бұрын
Direct Tools is a good place to keep an eye out for the Ridgid sander. I got it from there, new just factory blemished (the box had a hole in it), for $180 I believe. It was during a sale event, but they do a different sale almost every day. They still qualify for the the Ridgid LSA as well.
@philippeterson9512
Жыл бұрын
I got my Rigid unit brand new at Factory Direct for $98. Don’t ask me how. This was about 4 years ago.
@martyclayton8868
Жыл бұрын
I did the same thing but it was about 150.
@NonieTools
Жыл бұрын
Wow, looks like wen is stepping up their game. I used to sell Adirondack chairs and i had a big grizzly edge sander that wrapped around and was like 5' long and massively heavy. Can't believe they make that tool so much smaller and lighter!
@janschoice3855
Жыл бұрын
You always have such nice helpful videos. You try to help others to build their woodwork shop! And save some money in the process. Just want to let you know that is really appreciated! From the Netherlands ❤👍🏻
@joshuabray37
Жыл бұрын
I've found his reviews and tips to be spot on. When I look for reviews, he is one of about 5 people I check.
@scorpianspirit5124
Жыл бұрын
I purchased this machine in January of this year and use it all the time on my projects. It just works and he is right about the dust collection, as it works really well...Just my 2 cents worth... I also have the Wen miter saw and really like it as well. Cheers.
@averykeeling1167
Жыл бұрын
I personally just got the pure spindle sander as I like the solid cast iron base to it, I just combo it with a belt/disc sander combo which helps with flat cuts
@JoshD4PREZ
Жыл бұрын
I’ve got benchtop versions of Wen’s bandsaw and belt/disc sander. Great in a small shop, both under $150. I also have Wen’s small ceiling air filtration system I know there are much better ceiling units out there, but priced at $110 I couldn’t pass it up. You could hang multiple units all around your shop for the price of a single high end one You did a great job explaining the quality of their products and their functionality. Appreciate you doing this review, a spindle sander is close to next on my list!
@brennik05
Жыл бұрын
How do you like the bandsaw? I was looking for a benchtop model to leave my 1/8” blade on permanently & was thinking about Wen. I have a 14” bandsaw for bigger projects so it doesn’t have to be top of the line.
@chipsterb4946
11 ай бұрын
I’ve been debating about getting one of these. My alternative would be to get a belt/disk sander with a cast iron table then a spindle sander later. More money yes - but the tables on these just don’t look very sturdy or accurate. (Electric guitars are a long-term goal)
@stevewalker9302
Жыл бұрын
Another great video! I've had my Ridgid oscillating sander for 10+ years and love it. I've never had the knob get stuck like you said but I do agree with the dust collection. I found that putting duct tape over the "vents", on the table behind the belt, makes it much better. Keep up the great work.
@GyWO10
Жыл бұрын
I’m loving my Rigid sander that I got on sale through your discount page! Until this video I thought it was just my sander that had difficulty loosening the threaded cap. Glad to see it’s just not mine. All in all, this has improved my workflow with sanding curved profiles
@ahpp96
Жыл бұрын
I have the Grizzly Oscillating Sander that is the same thing as the Rigid and Wen for $200. It is fantastic one of my favorite tools.
@GregsWorkshopOregon
Жыл бұрын
I have the Grizzly, it's a great little sander.
@chipsterb4946
11 ай бұрын
The same as the Wen yes, but the Rigid is different. Not necessarily better…
@ChrisHornberger
Жыл бұрын
I have that Wen sander, as well as their 8" jointer and their track saw. Great lower cost options that do their jobs without drama or worry. Very happy with my purchases.
@genebaldwin7342
Жыл бұрын
I would like to see you review a little more of a professional spindle sander, the bench top Jet spindle sander. Take a trip to Atlanta and do the review at my little shop!
@cfchouston08
Жыл бұрын
I have the Triton. Almost exactly as the WEN. Just the colors. Very happy with it.
@wardperozuk2288
Жыл бұрын
I have had my ridged for about a year now and use it often. Flushing up box joints is a snap with this!!
@spectreoftruth
Жыл бұрын
⛔WARNING!!! I purchased this Wen Belt / Spindle sander back in (Apr 2023). It's only (June 2023) and I've only used this VERY LIGHTLY to add bevels to 10-15 pieces of small soft wood. Now for the last 2 days I've been on it a little heavier, but still only using it to buff out the scratches & pits on a few small brass pieces. I use very light pressure and I'm sure I don't even have 100 hours in on this machine... maybe not even 50hrs; but something (POPPED) inside and now it doesn't oscillate anymore. It sounded like maybe some kind of rubber belt snapped - I don't know. But what I DO know is that it just passed the return window last month (How convenient)!! 🙄 So now I'm stuck with a $250 basic sander that DOESN'T oscillate... everything else still seems to work (for now). I'm going to replace it soon... probably separate the features next time and get a HEAVY DUTY SPINDLE SANDER... and a separate HEAVY DUTY BELT & DISC combo-sander. My work is actually considered LIGHT duty, but apparently we gotta go with HEAVY DUTY to keep from replacing all this crap every 6-12 months!! 😮💨 I guess you really do (GET WHAT YOU PAY FOR) because all the higher end machines are $500-$1,000+. The $250 range is considered "Hobby Gear" and there's a lot of videos taking these low-end models apart to replace worn out parts after only a few months of use. For ME - I'm done with WEN! This is the only WEN machine I've ever used... and the last; I don't have $250 to light cigars with, so PURCHASE THIS AT YOUR OWN RISK!!
@adamc3474
Жыл бұрын
I bought the wen belt/spindle sander last year and it has worked well for me. The only thing I have to be careful of is when using the belt, It does not sand perfectly straight. It can create an angle or a dip on the part. To counter act this I take it slow and flip the part to keep it even. Otherwise it has been a great addition to my shop. Stay awesome.
@flashwashington2735
Жыл бұрын
Thanks.
@jaredschroeder4431
Жыл бұрын
I have the Wen and it works great for my needs. I bought it as it was much cheaper than the Ridged. I was very surprised how well this functioned. I use it all the time.
@zwitchguitars
Жыл бұрын
Depending on sales, the Harbor Freight Bauer also works very well with nearly the same design as the Rigid and Wen. Wouldn’t be surprised if all of the parts are interchangeable
@ruelsmith
Жыл бұрын
Would work great getting pattern templates shaped out.
@russmartin4189
Жыл бұрын
I have the same one shown. I use it all the time. Just makes everything quicker and easier, however you have to make sure you grit is not too coars or you will sand more than you want.
@ClintsHobbiesDIY
Жыл бұрын
Many thanks. I put one on my want list. I favor Wen tools. I have a Wen generator, lathe, bench grinder. etc. They never let me down.
@tompackman4640
Жыл бұрын
I had been using the Ridgid for years. When I replaced it I tried the Harbor Freight version which is identical to the Wen except for the color. I could not get used to the belt spinning in the opposite direction if the Ridgid so I took it back and got another Ridgid.
@kjh_woodworking
Жыл бұрын
I found your review of the WEN oscillating spindle and belt sander very informative and helpful! As someone who enjoys woodworking, I'm always on the lookout for tools that can enhance my projects. The features you mentioned, such as the onboard storage, adjustable table, and good dust collection, make it quite appealing. I particularly appreciate the versatility of the spindle sander for sanding smaller items with curves and profiles. Thanks for sharing your insights and recommendation! Now I just need to find one thats available in Australia!
@EverydayBuilds
Жыл бұрын
I can’t say for sure, but it sounds like you may have watched one of my recent videos 🤔 Or it’s just a crazy coincidence, lol. One of my biggest tool regrets was buying the rigid spindle sander. But that’s only because I didn’t really have a need for it, based on what I build. 🤙
@731Woodworks
Жыл бұрын
I did see that one. Agreed, it is 100% dependent on what types of project you build.
@EverydayBuilds
Жыл бұрын
@@731Woodworks Awesome! Thanks for watching. Love your content by the way 👊
@731Woodworks
Жыл бұрын
@@EverydayBuilds Same to you. You're doing a great job.
@EverydayBuilds
Жыл бұрын
@@731Woodworksthank you 🙏
@mikedickerson5174
Жыл бұрын
I agree. I actually have both the Wen spindle sander and the belt sander/spindle sander like you do, just so I don't have to change spindles, I'm lazy. I love them both for all the reasons you mention. Price, quality, power, dust collection. Awesome machines and use the stuffing out of them. I have a small shop, occasional customer projects. Great quality, I don't understand the negative comments about Wen tools. In my experience they are a great combination of quality and value.
@tfwoodcraft
Жыл бұрын
I got this WEN for Christmas and LOVE it. makes sanding small parts so damn fast.
@LivingTheLifeRetired
Ай бұрын
I’m debating between this or a combination disc/belt sander as my first sander and buy a separate spindle only sander. Any suggestions?
@howiewhatever1072
Жыл бұрын
I have been using my Rigid sander for probably 10 years without problems. I like the large table and have used the miter slot many times. One thing about the large table is that you can use the large end of the belt as a spindle sander. It saves having to switch out. I haven’t had a complaint about the dust collection although I use a mask.
@davidhogue100
Жыл бұрын
I have the HF version. Looks to be the same exact tool. I love mine
@slbentley
Жыл бұрын
Oh yeah looks just like it. I was considering the Wen but with a HF about a 10 minute drive from me, plus much easier avenue for a return, sounds like a better option. Thanks for the heads up.
@ronswoodshack
Жыл бұрын
Haven’t built anything yet that requires that tool, but I’ll definitely give the Wen a try! Thanks Mighty Matt
@Damon_Barber
Жыл бұрын
Spindle sander is on my list. They are definitely a must at some point in time. Such a time saver and so versatile!
@Damon_Barber
Жыл бұрын
And don’t forget the sandpaper eraser to extend the life of your belt and spindles!
@StevenJones-m9g
Жыл бұрын
I bought a WEN spindle sander when I took on a project of making a double Adirondack chair with a table and it was perfect for all the curved parts. The best part was that my wheelchair-bound son was able to do a good deal of sanding with it which he could not do with my orbital sander.
@PaganWizard
Жыл бұрын
I have the Triton flavor of this tool, and have zero regrets.
@Shannon-v3r
Жыл бұрын
Don’t know how I missed this video. Again, almost unbelievably timely for me, this is something I’ve neglected buying and have felt the need more and more as I grow in this. I’m sold on this one for sure. Would you still recommend the Wen drill press these days?
@731Woodworks
Жыл бұрын
I'm still using mine. Works well for the price. I'm sure there are better options out there, but at the price the WEN is, it's hard to beat.
@yahwehwoods
Жыл бұрын
Great information 😊.. well explained video 👏🏻👏🏻👏🏻
@charlescollier9591
Жыл бұрын
I have had the Bauer version from Harbor Freight for about 2 years. One of the handiest tools in my shop. I end up using the belt more than the spindles.
@JB-vf8ub
Жыл бұрын
I really like your comparison videos, especially the trac saw videos. Back to this video, I've had the Ridgid for many years, for a long time just because but recently i've used it more and it can be a game changer. You mentioned never using the T track, I recently made a head board with various pieces of wood and created a T track guide to easily square up the ends with the belt sander and was used for the fine tuning to fit all the pieces. The belt was also good for face sanding some of the pieces.
@hiredgoon13
Жыл бұрын
I've got the wen handheld spindle sander, love it. It's good handheld or bench mounted with the clamps
@ericeinsmann5559
Жыл бұрын
I've been looking at getting this unit for some time. Excellent video!
@jerryhuber3653
Жыл бұрын
I have the Wen version. It’s absolutely fantastic.
@worstworkshop
Жыл бұрын
"You're not going to be losing anything with this." Oh yeah? Challenge accepted!
@lechatbotte.
Жыл бұрын
Lol that’s me where the heck did I put that lol
@4321Woodworking
Жыл бұрын
I got the Ridgid because of it being the gold standard it seemed but also the larger table top seemed like it would be beneficial. I don't use it often yet, have plans to, but it sure is handy when I have used it. That WEN looks great also.
@JeffEstesBuilds
Жыл бұрын
Man, great review. Definitely gonna pick one of these up based on this video. Keep it up man, very helpful for all levels of woodworkers.
@ponyboyc
Жыл бұрын
I've been looking at this for the past year think its going to be the next tool I pick up just have to find a place to store it
@trigunstudios217
6 ай бұрын
How does theis compare to the other WEN sander?
@FixItFrench
Жыл бұрын
Why is it that I am always impressed with WEN? Everyone knows WEN is “budget friendly,” but I often find it to be much more reliable (and more powerful) than brands like Ryobi and Portal Cable
@731Woodworks
Жыл бұрын
Agreed!
@joshuabray37
Жыл бұрын
I've always been a Ryobi fan (yeah, they aren't "the best", but they are pretty darn good for the money), but I'm curious about WEN. They seem to get decent reviews... I'm upgrading to Festool for most things now, so, I likely won't be buying one anytime soon, but we shall see....
@totallysick88able
Жыл бұрын
I recently got a Wen belt sander and I’m very impressed with it! I think it was less than $30 but if I don’t know any better I’d have guessed it was a $200 tool
@russmartin4189
Жыл бұрын
I researched these sanders before buying the Wen. I have had it now for over two years and it has been a workhorse and a big labor saver. I would not do woodworking without it. It is that good. By the way, all of these sanders appear to be made in the same factory in China. The only difference is the color of the plastic. Even the Ridgid is probably made in the same place, in my opinion. Just buy it when you can get the best price, which may be Memorial Day. By the way, get a Rakuten card and save 15%. Can't beat it unless you get a card with a big signing bonus. I bought a lot of tools with those.
@yoseflugashi9820
Жыл бұрын
Excellent review. I bought the Ridgid one on sale (Factory Reconditioned, $180) based on your prior review.
@vernonhurst7144
23 күн бұрын
How does this compare to the Grizzly one that's almost identical and is currently on sale for $175?
@kenerickson4923
Жыл бұрын
The 1st thing I noticed is that the rotation is different between the 2. I have had my Ridgid for probably 15 years and use it all the time. Thanks for the review.
@thegrizzlyoldtiger
Жыл бұрын
Hey brother, thanks for another great video and tool review! I appreciate all your hard work, take care!
@funhousefibers
Жыл бұрын
Thanks for the comparison review- this is the next tool on my list and I have been wondering how I could give up the real estate to store the Rigid in my tiny shop. I’m happy to find out how the Wen performs. I appreciate the smaller footprint!!! 👍
@seaneverett3929
Жыл бұрын
I have the Harbor Freight Bauer version of this one. Works great.
@Shannon-v3r
Жыл бұрын
Oh yeah, get one of those rubber things to clean the sanding surfaces, Harbor Freight has them
@lv_woodturner3899
Жыл бұрын
I have the Ridgid, purchased a long time ago, 15+ years. This now gathers dust. I do not like the thump-thump of the belt at the joint. I preferred the spindle sander function but found the table too small. I later purchased a dedicated oscillating spindle sander with a larger table. I love using the dedicated spindle sander. I would not want to be without this machine, but the Ridgid was not a good purchase for my needs. Dave.
@SierraMike53
8 ай бұрын
I've heard that the Wen is louder than the Rigid... does anyone have decibel readings on them?
@stoneyj1a1
Жыл бұрын
Got a question about these great sanders. I want to sand my baseball bat a bit to take some material off. Is it possible to get a concave drum for this sander so that it will evenly sand a baseball bat? I'm not even sure it would work. But im looking for a fitting that would be wineglass shaped if you know what i mean. I've tried sanding the bat with a palm sander and of course it just makes flat spots.
@robertmorse4582
Жыл бұрын
Great video lm going to pick one up tonight
@afpitbull60
6 ай бұрын
Any thoughts on the Grizzly Model # G0739?
@bjaminf113
4 ай бұрын
Did you find any good info on this? Currently looking myself.
@ancienttom97
Жыл бұрын
The Wen must be a fairly new machine. When I bought my Ridgid, I researched all the units within my price range but the Ridgid was the only one I found with a tilting table surface. That is the main reason why I paid the extra money for the Ridgid. All the other implementations seem to be the same with all other devices. Oh yes, Like you, I have yet to use the T-track for mitering, but I also wanted that T-track with a miter gauge in case I needed to have to do sanding at an absolute mitered angle. It's better to have it than wishing that you had it.
@markjohns4651
Жыл бұрын
I bought the Ridgid sander from Direct Tools for around 180 with shipping, when you told everyone about a sale they had going on last year or the year before (time flies). It said it was factory blemished but I never have figured out where the blemish was.
@polstakanoff
Жыл бұрын
Ridgid EB4424 Sander is the best
@lextheap1638
Жыл бұрын
I'm not gonna lie, I sharpen my mower blades on mine too
@joshuabray37
Жыл бұрын
I made a knife with mine. It worked pretty well. I mean, the knife is probably trash, but it looks like a knife (and is sharp).
@scottmccutcheon2530
Жыл бұрын
Had 2 ridgid sanders neither one lasted very long. Purchased the Wen a couple of years ago and haven’t had any problems. Only thing I miss is the miter slot
@nickbrutanna9973
Жыл бұрын
Rubber Feet!! So it has LRF Support! ("Little Rubber Feet") 😀
@NathanMino
Жыл бұрын
Love the t-shirt!
@drkline69
Жыл бұрын
I have the Wen and love it. Nice review.
@SomeDudeOnline
Жыл бұрын
Any reason why a bunch of the pictures of the product by WEN don’t have the spindle knob in place?
@Slugsie1
Жыл бұрын
I have what appears to be the same machine but branded by Triton. It's a great tool.
@markphillips5800
Жыл бұрын
I saw another video listing the Ridgid version as a tool NOT to buy. This is definitely dependent on the type of work you do. I've owned the Ridgid for more than ten years with no hassles or issue. I use it a lot (small projects and guitars) and would buy another one if it ever died. I like the larger table and it has a larger motor. This type of tool is invaluable for me but definitely favors woodworkers that a doing smaller projects with lots of curves. Very informative video and I picked up a couple of uses that I never considered. Oh, and the t-track slot - I've never used it either.
@jameskuhlman9835
Жыл бұрын
I went with the Grizzly version of this machine, T27417, after looking at the DeWalt and Wen specs. More hp, 1/2 vs 1/3, and free shipping did away with any sales resistance.
@ericpetitclerc5519
Жыл бұрын
The price difference is not that big in Canada, but I've decided to trust you, so we'll see how the Wen goes in the following months... Thanks!
@anthonykrushinski9001
Жыл бұрын
I have the Ridgid and worked great for about six months then it wouldn’t start. The motor would hum, but the spindle would not turn unless I spun it by hand to get it going. I tried contacting Ridgid but never got a response, so after some research I found a KZitem video explaining that the problem was the soft start switch. I ended up removing the switch and windings and rewinding it with about three times the amount of wire. Works great now but I should not have to upgrade there cheap part.
@AngieWilliamsDesigns
Жыл бұрын
I bought a Triton because I had a different wen tool that died after a short time. So I got the Triton, I’ve not been happy with it. Maybe I should try this one.
@731Woodworks
Жыл бұрын
From what I can gather, they are the same or similar machines.
@lawrencelunsford6028
Жыл бұрын
Good review Matt. I believe that the Ridgid you have (and I have as well) has a LSA. I'm not too sure that the newer model has that, maybe a one or two year. That fact may make the Wen more attractive.
@marioatencio1959
Жыл бұрын
I'm on my second Ridgid and would but another if this one fails. I use the belt and spindle functions. It's one of my most used tools. I only wish it was variable speed.
@ATthemusician
Жыл бұрын
I have the wen spindle sander, it works as good as you would ever need a spindle sander to work, and I think it wasn't even $100 when I got it. I really wish I had the belt version.
@scottydntno
Жыл бұрын
I returned mine.
@TomsBackyardWorkshop
Жыл бұрын
I just got that exact model. I haven't used it yet but I wish it had a t slot Im not sure what Id use it for but im sure I would find a use if it had one.
@jwhiddon69
Жыл бұрын
This looks exactly like my Triton sander, except different color scheme. Even the accessories are identical.
@Emang169
Жыл бұрын
No regrets, very useful tool. I might argue most have.
@kokokyoushi
Жыл бұрын
Looks good, but I'm not crazy about the plastic parts.
Пікірлер: 207