Been cringing every time he walks in front of that gun.
@derrickmitchell39dm
4 жыл бұрын
He gotta be convinced now that airguns are almost but not quite on the level of powder burners.
@WillRomansAirgunworld
4 жыл бұрын
Powder burners will always have the upper hand over airguns but the technology is improving year after year.. so to me time will tell...thank you brother for the comment..👍👍🇺🇸
@giselleroman2140
4 жыл бұрын
Love your channel, thanks for keeping it 100% your a really funny guy
@WillRomansAirgunworld
4 жыл бұрын
Thank you.😎👍🇺🇸
@ikonikhunter
4 жыл бұрын
Man bruh...I think it may be time for a refund. But that look on ya boy face when it did shoot was priceless lol
@WillRomansAirgunworld
4 жыл бұрын
Thank you brother for the comment....lol...yes it was priceless...lol👍👍🇺🇸
@deankissos2861
4 жыл бұрын
Hi Will. Thank you for all your work and information you have provided on the Hammer. I actually own one as well that I had ordered in 2018 and was finally delivered a couple of weeks ago. Unfortunately, it has all the issues you identified in your prior video. In particular the barrel droop issue that almost destroyed the DannyFL Ronin and extender I put on it. I did notice you have a different mounting system that slides over the shroud, it appears. I would be very interested in all the mods you have made to get this gun to operate correctly. Thank your again for your informative videos.
@WillRomansAirgunworld
4 жыл бұрын
Thank you Dean for the comment... yes i believe the umarex hammer is a gun that engineers over at umarex USA did not put to much thought into it....this product is not safe to operate and can be a hazard to your safety.... but thanks again Dean and be safe my brother.. 👍👍🇺🇸
@Rodan1975
4 жыл бұрын
Yo that made me jump! Well god damn son!
@jerrypurnell4066
4 жыл бұрын
I did that with some friends ,with my marauder ,wished I video. They couldn't believe how quiet it shot. Texan is next .50cal ,great video Roman.
@WillRomansAirgunworld
4 жыл бұрын
Thank you Jerry..👍👍🇺🇸
@delonteespencer4345
Жыл бұрын
I just ordered the hammer over the weekend before I watched this video .🥴
@WillRomansAirgunworld
Жыл бұрын
Lol... I hope you have good luck with your hammer.. I know i did not..lol happy shooting my friend. 👍👍🇺🇸
@henrymoreland8719
4 жыл бұрын
Brilliant Will, very surprised no cuss (cuz) words where uttered, first shooting that thing I would swear.
@henrymoreland8719
4 жыл бұрын
opps, strike that, "cuz", I looked it up and it may mean something I did not intend. CURSE is right.
@WillRomansAirgunworld
4 жыл бұрын
Thank you Henry for the comment...lol yes i did cuss.. but i cut it out of the video... keeping it PG for the kids...👍👍🇺🇸
@ronklug6395
4 жыл бұрын
Nice vid Will.
@WillRomansAirgunworld
4 жыл бұрын
Thank you Ron...👍👍🇺🇸
@josephcarter8425
Жыл бұрын
Hi Will, I just came across your channel today in search of making a suppresor for my 50 cal. I just subscribed but I'm curious for you have any videos on how to make that suppresor or where can I get one?
@WillRomansAirgunworld
Жыл бұрын
Thank you Joseph for the comment brother... yes Donny FL is your to go guy for big bore guns in the airgun world.. the LDC you'll like to use is called the Emperor.. and that's the name of the company Donny FL hope this helps and thank you for watching brother!👍👍🇺🇸
@josephcarter8425
Жыл бұрын
Thanks Brother and I'm looking forward to following you.
@waynerobinson2656
3 жыл бұрын
Wow! Just noticed the blast of air exiting the mag well.
@ianprice2441
4 жыл бұрын
Lost a seal? Man that thing is sick!!!
@WillRomansAirgunworld
4 жыл бұрын
Thank you Ian...👍👍🇺🇸
@jungleghostsurvival
3 жыл бұрын
We just bought the Hammer can we inter change tanks I stead of refilling
@fathertimencUSA
4 жыл бұрын
Have you considered the AirForce Texan in .50 cal. Will?
@WillRomansAirgunworld
4 жыл бұрын
Not my cup of tea...but it is a reliable pcp..👍👍🇺🇸
@carsmax
4 жыл бұрын
Oh man, you are lot lucky with this gun !!!! What happening at 8:58 ? Some seal got to hell !! Oh , your buddies you know, both are crazy !!! In a funny way !!!!!!
@WillRomansAirgunworld
4 жыл бұрын
Thank you brother for the comment....yes we had another malfunction with the hammer... more O-rings issues... but now there all fix...👍👍🇺🇸
@richardcampbell5762
4 жыл бұрын
Dam that sucks brother!!!!! That just breaks my heart. Nothing sucks worse and getting the bro's down there and shit blows up in your face. Other than that hope all is well brother? Stay safe... stay blessed.👍🇺🇲✌
@WillRomansAirgunworld
4 жыл бұрын
Thank you my brother for the comment....yes it is a set back for the hammer...but i will get it right...you saty safe my brother and bless too...👍👍🇺🇸
@giselleroman2140
3 жыл бұрын
Great video!
@WillRomansAirgunworld
3 жыл бұрын
Thanks!
@brandonbillingsley3813
4 жыл бұрын
I’m happy hatsan pile driver deliver before hammer or I would be at the machine shop trying to re-engineering the hammer... my piledriver is a best!no mods needed couldn’t imagine my pile driver with anymore power... hope you get the hammer lined out..it sucks.. been down that road.. good luck
@brandonbillingsley3813
4 жыл бұрын
Sorry beast
@WillRomansAirgunworld
4 жыл бұрын
Thank you Brandon for the comment brother....yes sir im doing open heart surgery on this hammer ill get it right...re- engineering is my middle name...thank you for the kind words....👍👍🇺🇸
@daviddbf2691
3 жыл бұрын
Out of all your guns which is the one you pick up the most for accuracy and cost trying to get an idea fiction to buy
@WillRomansAirgunworld
3 жыл бұрын
Thank you for the comment brother....my go to gun in my collection wood be my Vulcan2 super accurate.
@easternblocairguns2728
4 жыл бұрын
Maybe you can give the hammer to one of the looters. I'm sure they would take it for free.
@WillRomansAirgunworld
4 жыл бұрын
Lol...thank you for the comment brother 👍👍🇺🇸
@jamesausbrooks7913
4 жыл бұрын
Great video
@WillRomansAirgunworld
4 жыл бұрын
Thank you James...👍👍🇺🇸
@lethalgunner4903
3 жыл бұрын
Dope vids keep it up 💯💯💯💯
@WillRomansAirgunworld
3 жыл бұрын
Thank you my brother...👍👍🇺🇸
@photocrap
3 жыл бұрын
Hi Will, I just started watching you based on studying the UX Hammer. I just want to reiterate what I've learned so you can get back at it. Those tanks won't fill your tank up to the full 4500psi... I think!! What I know is that if it is filled to max. The Hammer will shoot 3 shots at 100% the fourth shot comes in at just under 90%. The Hammer is designed to dump like that when it gets to the fifth or sixth shot. I am so excited to see these 6 mods that you made. 4 Shots from full then refill, although I have heard it can shoot a fifth shot. You can run it all day with that tank because it shoots only at 3000psi. I hope your rifle is good. Just less shots. It's totally normal to dump like that when low.
@WillRomansAirgunworld
3 жыл бұрын
Thank you Jason for the comment... yes indeed it has been a long journey with this UX Hammer...but i am very happy with it now. And confident it will perform during hunting season... thanks again brother and welcome to the channel hope to hear from you again..👍👍🇺🇸
@jrlayneoliver
4 жыл бұрын
That's crazy!! Refund time
@WillRomansAirgunworld
4 жыл бұрын
Thank you sir...im still working on it..👍👍🇺🇸
@heathhalfhill6867
4 жыл бұрын
Sorry to see your hard work on that gun has to continue. This is part of the fun of air gunning though, but still, Umarex should have never released this gun until perfected and safe. The second shot sounded like the air was coming out of the barrel like the valve locked open. I really hope it is an easy fix. I could see the look of”Dang...what now” on your face when the HPA starting leaking. I don’t know about you but when I pop a burst disc or pop a line and 4300 psi starts flying out unexpectedly...I always feel the need to check my underwear😂. That’s a little scary bud. You will get it figured out. It’s probably something simple...I hope! Nobody got hurt so it’s just a learning curve this time and not another busted hand thank god. Have patience my friend. I do hope you tell us what happened for the air to leak out like that. I am very curious. Take care, stay safe, God Bless.
@WillRomansAirgunworld
4 жыл бұрын
Thank you brother for the comment...i will update you on the next video I'll be working on.. im going to be working on this gun until i get it right...debugging it is my thing...but anyway thanks again and I'll see you on the next one brother 👍👍🇺🇸
@SinSPD
4 жыл бұрын
@@WillRomansAirgunworld Just noticed that the Take 2 shot was with the gun un-tethered. Did you take any shots with the gun un-tethered before the take 2 clip? It seems that the Hammer will auto degas after the 5th shot. First 3 shots are suppose to be full power, shot 4 is suppose to be weaker (like falling of regulator), and shot 5 will bring the tank pressure down low enough as to not be able to keep the valve closed (degassing through the barrel). Here is a vid from Umarex about the degassing kzitem.info/news/bejne/jmd5nq6PsX53rWk
@WillRomansAirgunworld
4 жыл бұрын
@@SinSPDthank you for the comment...yes i have shot the Hammer un- tethered before with no problem and tethered with no problem...i found the problem...90% of the O-rings were dry rotted from the factory...so i replaced all the o-rings in the gun and have not had 1 problem since...the Hammer is ready for hunting season now...👍👍🇺🇸
@rickmanigault6447
4 жыл бұрын
Will Roman's Airgun world I have one on back order, should I still get it?
@WillRomansAirgunworld
4 жыл бұрын
@@rickmanigault6447 thank you for the comment brother...i not going to tell you not to get it...BUt... i do not recommend this gun to anyone...hope that helps.
@lasseholtzer8590
4 жыл бұрын
good video as ever..... hope you try the hatsan piledriver next in 50 cal..... single shot and no issues.......
@WillRomansAirgunworld
4 жыл бұрын
Thank you...might give a go...👍👍🇺🇸
@Tofazfou
4 жыл бұрын
What up WIll?! Well, don't quite know what to say. Good for you sticking with the gun. That's a good thing as from what I understand from SG, your capable. But, at the same time, its sucks like a porn star to have issues with airguns. I sooooo hope you figure it out! Good vid though
@WillRomansAirgunworld
4 жыл бұрын
Yes sir... im taking it back to the drawing board....got some mods done...but were ging to rebuild this hammer all the way now... getting some equipment to help with the job. But hope to have here done by hunting season..👍 thank you my brother stay safe.
@JD_1
4 жыл бұрын
What a gun.. Nice
@WillRomansAirgunworld
4 жыл бұрын
Thank you..👍👍🇺🇸
@jasonharvey778
2 жыл бұрын
Sweet
@sell682
4 жыл бұрын
Little unnerving to have 4500psi just dump like that. Nice video but the Hammer needs more work , took 3 years to get to here and still needs more time is unfortunate but they should pull it before someone get seriously hurt.
@WillRomansAirgunworld
4 жыл бұрын
Thank you Sabino for the comment.... yes i do agree with you wen it comes to high pressure.... thank you sir...
@koopasayer5999
4 жыл бұрын
he missed the far left water jug :(
@WillRomansAirgunworld
4 жыл бұрын
Thank you SliverChan for the comment... and welcome to the channel... lol you my friend pay attention ! I did tell him far left but he did not listen to me. So he went for the middle one instead.. thanks again and I'll see you on the next one.. 👍👍🇺🇸
@koopasayer5999
4 жыл бұрын
@@WillRomansAirgunworld hi i just thought he missed because the sighting was off lol but neat looking forward to new videos
@ennalenndo3356
3 жыл бұрын
Long time no see.😊🇯🇵👍️
@HunterXenios
4 жыл бұрын
so is this a normal problems with the hammer or did u get a lemon? thinkin about buying one
@WillRomansAirgunworld
4 жыл бұрын
Im not sure if I got a lenon..or if its a normal thing i do not have a nother hammer to compare it to...but this gun has a lot of issues for sure.
@marcusstanley9317
4 жыл бұрын
Dang man that first shot was perfect! Send it to your friend SG and let him do his magic on it! Lol! Just joking pretty both of guys do great airgun smithing and if a gun is defective or part is defective then just send it back. I know it sucks after the long wait!😤 Best wishes
@WillRomansAirgunworld
4 жыл бұрын
Thank you brother for the comment...lol back to the drawing board for the Hammer ....and we will do some more work on it ...
@JIBREAL1967
4 жыл бұрын
Damn...that's not even mine...and my heart broke when I heard that second shot😭
@mikesbackyardeh
3 жыл бұрын
I watched the video a couple of times will what happened to the gun she sounds like it was leaking air .. at the end of the video you said ya get what ya pay for 💰 lol .. that’s what my dad says lol .. In the mean time I hope you are doing well.. 👍👍👊👊🇨🇦🇺🇸🍻
@WillRomansAirgunworld
3 жыл бұрын
Doing well Mike.... thanks for asking brother...bine super busy working on some projects but thank God im almost done with.. hope your doing well to brother and your family... stay safe. 👍👍🇺🇸
@stedyone1090
4 жыл бұрын
As I said before the Hammer should and will be recalled by the end of the year. That's my unbiased opinion. Lol
@WillRomansAirgunworld
4 жыл бұрын
Thank you brother for the comment...100% agree!!!👍👍🇺🇸
@HajimotoProductions
4 жыл бұрын
That Hammer put the smack down didn't it??? Nice video Will.
@WillRomansAirgunworld
4 жыл бұрын
O..... SNAP its my brother for another mother.....what's going on Haji...long time no talk man...hell yeah i finally got this thing up and running correctly...a little minor setback...but she is at 90% ready for hunting season now... happy to hear from you my brother.... thanks for stopping buy my dude!!! Stay safe..👍👍🇺🇸
@toddhanis1516
3 жыл бұрын
I enjoy your video's🤘 I have questions once in while? Are you on Instagram? I bought ronin for my hammer& was like someone popped cork in my ear 😆 I messaged& Donny called within hr & sent me emperor😎still allot noise& shit ton back pressure out magazine port💩would you reccomend taking the shroud off& put can straight on barrel? Maybe shove cotton in shroud?? Rags?? I'd like to know your opinion since you more experience than I am. Also having issues with getting damn shoulder strap for thing😬💩💔
@WillRomansAirgunworld
3 жыл бұрын
Thank you Todd for the comment, I don't have any other social media. KZitem is my only network and as far as the noise, the Emperor will be your go to suppressor and that being said that will be the quietest you'll be able to make that airgun, there is too much volume of air coming out. The hammer is designed to hunt so I'm unsure how much more quiet we can make it.
@AlwaysCovered1227
4 жыл бұрын
What size is the O-Ring that you replaced
@WillRomansAirgunworld
4 жыл бұрын
Thank you brother for the comment...im not sure on the size of the o-ring...i bought the umarex o-ring kit and they do not specify there sizes on the o- rings.
@AlwaysCovered1227
4 жыл бұрын
Will Roman's Airgun world thanks. Do you think that it’s degassing do to a dirty valve like the manual claims or do you think that it’s something else?
@joegreen6417
4 жыл бұрын
Smdh, that thing is junk hopefully mine is a remodeled version if not it will be going right back to Pyramyd Air I'm not trying to throw away 850 bucks
@WillRomansAirgunworld
4 жыл бұрын
Thank you my brother.... hope to get right..lol
@allaboutpcpairguns7069
3 жыл бұрын
That's so disappointing. Great videos tho 👌
@WillRomansAirgunworld
3 жыл бұрын
Thank you Brian... and welcome to the channel brother...👍👍🇺🇸
@carsmax
4 жыл бұрын
Hey brother. Are U OK ?? Missing vid´s from you !!!!!
@WillRomansAirgunworld
4 жыл бұрын
Thank you my brother for your concern...im A.O.K Brother...bine really bizzy working on my business...its taking a lot of my time for the moment..but i will be back soon. Stay safe out ther. And God speed ..👍👍🇺🇸
@carsmax
4 жыл бұрын
@@WillRomansAirgunworld Take care U to bro!!!!
@phillipmendiola2100
4 жыл бұрын
The look on your friends face was cool first shot , the second shot scared him when the hammer failed not good send it back refund time 🎯
@WillRomansAirgunworld
4 жыл бұрын
Thank you brother Phillip...ill keep working on this one here on till i get it right...hope to get it running nice and smooth. 👍👍🇺🇸
@phillipmendiola2100
4 жыл бұрын
@@WillRomansAirgunworld sounds like a plan , was it the valve that stayed open and released all the air 🎯
@bluecollarsportsman613
4 жыл бұрын
Man I'm kinda sick for you on this one. The expression on your face said it all for me. After that first shot I thought oh boy, we got something here and then! smh
@WillRomansAirgunworld
4 жыл бұрын
Thank you brother... lol... ill fix this bad boy....a full overhaul Will Roman style!! She'llbe back!👍👍🇺🇸
@antoniojohnson9064
3 жыл бұрын
Will Roman's Airgun world Hey I read where bout on 5th shot it releases air
@Jesusreyes-in6xi
4 жыл бұрын
🤣😂😅😂😆😂😂😅😂🤣 if its no good send it back let them put it on the recycle bin them selves. Video was good but short keep shootin amigo.....
@WillRomansAirgunworld
4 жыл бұрын
Thank you Jesus...ill get this hammer running right soon...but it will need some work..👍👍🇺🇸
@Jesusreyes-in6xi
4 жыл бұрын
@@WillRomansAirgunworld it will be ok that had hapened to me to 😁
@fathertimencUSA
4 жыл бұрын
You ever thought about designing your own airgun Will and bringing it to market.
@WillRomansAirgunworld
4 жыл бұрын
Well its funny you mention that brother... i will not say what im working on... but note this... I am coming out of retirement...and im ordering lots of equipment right now as we speak my friend... so i'll leve at that..👍👍🇺🇸
@ianprice2441
4 жыл бұрын
Fathertimec ,I thinking that is best idea I've heard all week!!!
@Ariztid
4 жыл бұрын
You in Tampa?
@WillRomansAirgunworld
4 жыл бұрын
Yes sir...
@Thekoffrekup
3 жыл бұрын
6 min of bs.. seems like KZitem creators think we give a sht about your personal and social life... no we don’t, just get to what the title is referenced to dam
@Thekoffrekup
3 жыл бұрын
It also looks like you didn’t connect the air correctly. None of the other reviews have this issue.
@bowfishingfalcon1162
4 жыл бұрын
I've been waiting so long for the hammer ,but after your videos of the hammer I will definitely not buy it ,hope you get your money back
@WillRomansAirgunworld
4 жыл бұрын
Thank you sir... 👍👍🇺🇸
@menayazzie7765
4 жыл бұрын
After several years of hype, Umarex still can't deliver. What a piece of junk
@WillRomansAirgunworld
4 жыл бұрын
Lol...thank you Mena for the comment...give them 3 more years i think they will eventually get it right...👍👍🇺🇸
@ralstonraz
4 жыл бұрын
You need to either go heavier on the valve spring or lighter on the Hammer weight or hammer spring. But before you do all that ensure that there is zero friction in the action where the hammer moves. This valve dump may happen where the hammer gets kinda hung up when it bounces away after hitting the valve. Since you were tethering it at high pressure (I am presuming this), I don't think the valve spring maybe an issue. But it could be if the valve is not moving freely/ or it gets lifted off this seat and seats at an angle after the hammer strike. This is a simple yet trial and error fix. But the imp part is that it can be sorted. 😊👍
@WillRomansAirgunworld
4 жыл бұрын
Thank you brother for the great information on that...i will check all them areas to see if i can see what the valve is doing and with this gun the way it was built you are 100% correct...thanks again for the help much appreciated...👍👍🇺🇸
@jaygee3767
3 жыл бұрын
The Hammer is engineered to degas itself after the fifth consecutive shot. However, if it's doing something other than that just contact the Umarex USA tech department. Knowingly making videos with a malfunctioning gun is just dangerous. Stay safe.
@Soldis-vq5xg
3 жыл бұрын
🤦♂️😁😁😁
@davea.9570
4 жыл бұрын
Wow.. you tried, and your videos show that on the technical side you know what you're doing with airguns. Having it dump the air after only a second shot cant get an unbiased review. That thing is just untrustworthy. Glad it was not worse and thanks as always for the video
@WillRomansAirgunworld
4 жыл бұрын
Thank you brother for the comment.....i will hope to debug the hammer and get up and running soon... thanks again David..stay safe out there...👍👍🇺🇸
Пікірлер: 119