Converting mine in a few days. Thank you SO much for showing the part number of those axle stubs. I, too, was wasting time hunting them down.
@AdamSaruwatariXtreme
3 жыл бұрын
You will have a blast my friend. I am so glad I could help you out. Have a great time and weekend. 😁👍
@protocarbon
Жыл бұрын
I'm doing this right now, so it's very helpful! and boy, you weren't kidding. those bolts are hella stuck on there. anyways thanks for the content, threw you a sub! hope you're still doing gallardo stuff despite this video being 2 years old
@ad-re9bf
3 жыл бұрын
Damn just had a look through your channel and the content and production quality is way beyond many more popular channels. You deserve way more views.
@AdamSaruwatariXtreme
3 жыл бұрын
Thank you my friend! I appreciate that. Have a great weekend! 😁👍
@ad-re9bf
3 жыл бұрын
@@AdamSaruwatariXtreme I hope you have a good weekend too! Keep up the good work.
@AdamSaruwatariXtreme
3 жыл бұрын
Thanks Bud!
@araarslanian1397
3 жыл бұрын
Wow...you never seize to amaze me with your mechanical skills. And your vast amount of tools like that tire machine is a dream garage. Have a great weekend, brother. And say hello to your camera operator/better half for me 😉👍
@AdamSaruwatariXtreme
3 жыл бұрын
Thanks Brother! I just want to be like you when I grow up. Tools are Kryptonite to you and I. Everyone here says hello to you and your family. I hope you and the family are well. Have a great weekend! 😁👍
@CMAG
3 жыл бұрын
Awesome video man!Good tip about the "marking". I'll be using that. Have a great weekend. 👍😁
@AdamSaruwatariXtreme
3 жыл бұрын
I am glad you liked the video Brother. It always puts a smile on my face to help you out. I hope you did not get flooded out. Have a great weekend as well. 😁👍
@productreviewspecialist
Ай бұрын
Awesome video by the way and a well informed DIY demonstration
@j.d.2170
3 жыл бұрын
The G looks great with the new front bumper Adam. Changing the Gallardo to rwd sure looks like a wild ride. Keep it up!
@AdamSaruwatariXtreme
3 жыл бұрын
Thanks Bud. I am quite happy with the G. RWD was the right decision for me. Have a great weekend! 😁👍
@Sami-lx7mf
3 жыл бұрын
thanks for the Vid. I did the conversion on my Murci and the results are superb
@AdamSaruwatariXtreme
3 жыл бұрын
I am glad you like the video my friend. Good times in the Murci. Have a great weekend! 😁👍
@davidlg7830
3 жыл бұрын
Nice work bro. I got to say as you know I work in cars day in day out. And to be able to work on a car that is as clean as one of your cars would be a dream sent. Every thing I touch is covered in oil and trans F. Its always great seeing you brotha. Stay up ride low my friend. And tell your camera girl I said hello.
@AdamSaruwatariXtreme
3 жыл бұрын
Thanks Amigo! You of all people know that it never ends. 😂😂😂 I feel for you Brother. The farm equipment is usually covered in oil. Every one here says hello. Have a great weekend! 😁👍
@Olawz
3 жыл бұрын
Bad ass I can't wait to watch this. I've always wanted to know how this could it be done. Thank you again and stay safe!
@AdamSaruwatariXtreme
3 жыл бұрын
Thanks for always watching my videos Brother. I am sure you could do the job with your eye closed. I hope you and the family are well. 😁👍
@Twins.TV_
2 жыл бұрын
Nice video! What is the brand of the front splitter on the G?
@AdamSaruwatariXtreme
2 жыл бұрын
Thank you my friend! The front splitter was by Hamann.
@kevins34
2 жыл бұрын
Daar ha je ze wel
@Robonza
2 жыл бұрын
I plan to do mine, so this video is awesome with all the heads up. Did you lower the front coil overs? I heard you should do this to match the new weight.
@AdamSaruwatariXtreme
2 жыл бұрын
I am glad the video will help you my friend. I did lower my car since the weight reduction raised the ride height. After I lowered the G, I had the car aligned and added a bit of toe-in to create some understeer. Have a great weekend!
@productreviewspecialist
Ай бұрын
So I think you said in the video you can test it out by just removing the center driveshaft and keep the front axles and front diff in place? If so I may do that with mine...and if I like it, remove the front components and buy the stub kit
@patarmanurung4743
3 жыл бұрын
The underneath of that car is super clean. Did you clean it yourself before filming it? 😁
@AdamSaruwatariXtreme
3 жыл бұрын
Great to hear from you Bro. Dru cleans the underneath of all of of cars when they are on the lift. Luckily for me, she is a neat freak. 😁👍
@kurtpeter2214
2 жыл бұрын
Can you do the conversion without removal of the differential?
@thomasd3261
3 жыл бұрын
Great video! You probably also gain some wheel horsepower because there is less drivetrain loss
@AdamSaruwatariXtreme
3 жыл бұрын
I am glad you liked the video Amigo. You are spot on. I will eventually get the G on the dyno to see how it does. Have a great weekend! 😁👍
@thomasd3261
3 жыл бұрын
@@AdamSaruwatariXtreme Thanks, you too!
@uptownsamcv
3 жыл бұрын
I'm guessing the stub axles keep the wheel bearings properly seated? I actually over-torqued a CV axle nut on my Maxima once and it ended up causing wheel bearing wear and noise..
@AdamSaruwatariXtreme
3 жыл бұрын
You are correct my friend. Over torquing happens to me more than I like. Have a great weekend! 😁👍
@krassic21
3 жыл бұрын
Bro I don’t know how you find time to do this your always so busy
@AdamSaruwatariXtreme
3 жыл бұрын
It never ends Bro. I also have no idea how I get all of this done. How are things for you and Nicole? 😁👍
@krassic21
3 жыл бұрын
@@AdamSaruwatariXtreme I’m good I think everything is opening up again
@AdamSaruwatariXtreme
3 жыл бұрын
I will start planning everything for take 3. I am trying to get to Florida at the beginning of March. Would you like to join me on a non stop ride fest?
@krassic21
3 жыл бұрын
@@AdamSaruwatariXtreme sure lol
@circlek5289
3 жыл бұрын
Did CEL come on since electrical connector is disconnected?
@AdamSaruwatariXtreme
3 жыл бұрын
The CEL did not come on with my G Bud.
@gjgcars
3 жыл бұрын
Thoughts on Murci rwd conversion?
@v12power10
3 жыл бұрын
He won't regret it!!!
@AdamSaruwatariXtreme
3 жыл бұрын
Great to hear from you Bud. How is your amazing Murci doing? A lot of benefits to the Murci RWD conversion. Good times. What are your thoughts?
@v12power10
3 жыл бұрын
@@AdamSaruwatariXtreme Hi Adam, Murci is doing great. I did the Reid Performance RWD conversion with the titanium axle stubs about 3 years ago and couldn't be any happier. The car is a different animal acceleration wise from a roll. Some of the pros that I experienced are: 1. Weight savings most of which is unsprung weight, I weighed the parts and they came out to123lbs total (front diff, axles, torque tube, diff mounts, etc) 2. Less rolling resistance, faster accelerations from a roll (gained 7 mph trap speed on a little street section that I use for my experimental purposes ;) 3. Less clutch consumption and faster gear changes(egear) 4. More wheel and tire choices. Some of the cons are 1. Slower launch controls due to limited traction but that wasn't an issue for me as I don't launch the car often 2. The rear end kicks out easily on aggressive turns, driver needs to correct in time or bad things can happen (think of it like the car becoming an "Italian Viper") 3. No traction doing 1st gear rolling starts on the OEM Pirellis but I easily corrected that with the Toyo R888r in the rear which comes in the 335/30/ZR18s sizes, the car dead hooks with the Toyos from 1st gear on motor. On nitrous, not so much lol !!!!
@AdamSaruwatariXtreme
3 жыл бұрын
Your car sounds like a Beast Amigo! Glad to hear you are happy. Have a great weekend! 😁👍
@DuBstep115
3 жыл бұрын
So many fadeout cuts :S Try holding frame longer than 2sec
Пікірлер: 47