You got a good one. I carried a G23 for years off duty. Then bought an AlphaWolf 9mm barrel for it. Most Glock fans think those early Gen guns were better anyway but even Clownifornia allows Gen 3. 🤦♂️. That G22 is an awesome option as well. With that conversion barrel for it you’re money, probably the best couple of pistols you can own.
@crankygunreviews
Ай бұрын
@@OGsDangerShow I think I shoot my S&W M&P 40 better and it feels better in the hand, but I really think the old Gen Glocks are pretty good. Back when they didn’t care about frills like rails and optics cuts lol. I remember my oldest brother having a discussion about which handgun he’d buy if he got one (this is probably around 2000 or so) he said a Glock 17 or something like that, so maybe I just have some subconscious thing in my head I need to satisfy lol. The barrels I got were not lone wolf, they’re no-name but the fit like factory barrels. Drop right in.
@thefrogking481
Ай бұрын
Imagine seeing you here, I like your current channel and sub.
@crankygunreviews
Ай бұрын
@@thefrogking481 👍
@bpie8390
Ай бұрын
Keep puting the good videos out, work with what you can get; bolt, pump, lever and wheels. Go traditional for awhile with reviews! I shall be forever subscribed to someone who is stuck on the front lines against the anti-2A community in MASS. GOD BLESS🇺🇸
@crankygunreviews
Ай бұрын
Thanks man! You don’t know how much that means! I’m hoping to do some rimfire stuff soon. Maybe a lot of it.
@warrenharrison9490
Ай бұрын
We will fight these bad laws. I'm not running away.
@crankygunreviews
Ай бұрын
@@warrenharrison9490 awesome!
@warrenharrison9490
Ай бұрын
On that G23 and G22 with the 9mm barrel, the ejector should be swapped for a G19 G17 they have an angle to hit the smaller diameter 9mm case.
@crankygunreviews
Ай бұрын
I haven’t had any issues with ejection on the 23. Haven’t shot the 22 yet
@marodriguezsr
Ай бұрын
40 caliber ammo cheaper than 9mm ammo, a new barrel for $60/$70. That's Awesome bro.
@crankygunreviews
Ай бұрын
40 cal ammo is NOT cheaper than 9mm. I meant the 40 S&W guns are cheaper than the 9mm guns. No one likes 40 S&W anymore it seems
@lootlovers-oluz9534
28 күн бұрын
@@crankygunreviews in Brasil you see a Lot of 1911 in 40 sw
@crankygunreviews
28 күн бұрын
@@lootlovers-oluz9534 oh that’s cool!
@aeon_horos
28 күн бұрын
@@crankygunreviews Defensive round are actually cheaper in .40 than they are in 9mm. Target ammo 9mm is still cheaper. Federal HST in .40 is .47cpr vs Federal HST 9mm .80cpr
@tomstone6247
Ай бұрын
Don't worry Cranky , soon you will only be able to have a sharp stick , you'll no longer have to wonder about which shootin iron you have to buy . Very sad , I'm looking for a forked stick and an old bicycle , Y , they will certainly work on banning those too , their theory would be silenced weapon without a license .
@crankygunreviews
Ай бұрын
@@tomstone6247 yep
@javajeff3772
19 күн бұрын
I just don’t understand states like MA. They let criminals walk free, and they put law abiding citizens in jail for exercising their constitutional rights. Crazy.
@crankygunreviews
18 күн бұрын
Yep
@flyerwiebe25J
22 күн бұрын
My friend, you can buy a gen 5 Glock in MA until October 23rd. I've bought several gen 4 and 5 Glocks brand new over the years. Just need to go to the right place. Ask around at the mill, they'll tell you how.
@crankygunreviews
21 күн бұрын
I know how, but most shops won’t sell them. A “kit” with upper/lower is one thing. A full gun is different.
@michaelgraham8854
Ай бұрын
I am not a big .40 fan . I only have one,they never became what the Industry promised,but i think you made a great choice. It is bull how we are all in New England and have such varying rights.
@crankygunreviews
Ай бұрын
@@michaelgraham8854 yep I agree the rights here are wack… the .40 isn’t a bad round, I actually think I prefer it to .45 ACP, but it’s snappy in a lot of guns.
@michaelgraham8854
Ай бұрын
@@crankygunreviews Reading magazines i thought it was going to be big. The one i got was a S&W shorty Forty limited edition. Great gun,back when the performance center did real stuff., Now you get the performance guns at Bass Pro.
@crankygunreviews
Ай бұрын
@@michaelgraham8854 yeah the old performance center all hand tuned were awesome. What was the shorty 40 based on? Like a 4046?
@daleswalley7226
Ай бұрын
Basically a chopped 4006, with a briley bushing and fancy sculpting of the slide, 9 round mag too I think. Basically a 6906 in .40.
@crankygunreviews
Ай бұрын
Nice
@nebaldeby5369
Ай бұрын
You have two good Glocks here.I had a Gen 2, 19 that I sold when I retired, couple years ago. I was nuts for doing that. Four years ago I got the Glock itch and bought a brand new Gen4. At the time, around 2010, the Gen 4 with the finger grooves was available so I bought it. Right away, I had the frame finger grooves removed and had the grip stippled to what I like. The factory texture nubs I never liked. The Gen2 are great guns, I wish still had mine they last forever and it felt better in my hand- the G19 that is. You did good on replacing the spring, gave it a little tune up. The finish was so much better on the older Glocks as well. You have two great shootres here enjoy
@crankygunreviews
Ай бұрын
Thanks for the vote of confidence. I came to the realization that what I hate about Glocks (blocky and ugly grips) is actually what I like about them.
@mcb2757
Ай бұрын
40 SW is just fine. I'm getting ready to pick up what may be my last semi-auto handgun as well. I went with an M18 and not because I am a sig fan, but just because it's the military's pistol and I have more than one glock so if it is going to be my last i figured that may be a good one to go with. The reason I say it may be my last is because I live in a blue state only a few states down and after this election it may be impossible. I hope not.
@crankygunreviews
Ай бұрын
@@mcb2757 yep- good luck to you too my friend
@sunsetz72
Ай бұрын
40 is such an interesting caliber. The wolf conversion barrels are AMAZING!!!!
@crankygunreviews
Ай бұрын
Mines not a wolf barrel, but I’ve been pretty happy with mine so far- slight shift in impact with 9mm but still pretty accurate
@warrenharrison9490
Ай бұрын
Many FFL'S were selling gen 4-5 glock frames, then all that was needed was to buy a completed slide to finish your build and then file the EFA10 within 7 days of completion. Even GOAL (they have an FFL) was doing this. Admittedly, now with new laws hard to say whats going to happen now.
@crankygunreviews
Ай бұрын
I do know that, but it’s legally questionable, though legal, so I try not to talk about it too much on public arena- I try to stay above board on everything I do
@theepicgamerultimate4831
Ай бұрын
I had a gen4 Glock 22 as a duty weapon. When I retired I purchased a 9mm conversion barrel from Optics Planet, it functioned with FMJ but failed miserably with hollow points. Ultimately I sold the G22 gen4 because an injury from an accident I couldn't pull the slide back on it. However I purchased a new G17 gen3 and with the single recoil spring I can pull the slide back easier. Do I believe the 9mm is better than the 40 NO.
@warrenharrison9490
Ай бұрын
I ended up getting rid of my Ruger PC carbine chassis. It was fun, but dang it was way overweight for what it is.
@MultiSweener
Ай бұрын
Cmon C, gen 3, 4 and 5 are only available for thugs.
@crankygunreviews
Ай бұрын
🤣🤣🤣
@johncouture6752
Ай бұрын
Take the plug out the back is a vent for when the gun gets wet or humid it can dry out when holstered.
@crankygunreviews
Ай бұрын
This is a range toy mostly. That’s not gonna be an issue. Also, the only thing up in that cavity is the takedown pin.
@BigEdsGuns
Ай бұрын
+1 Subbed. I'm in Westernmass. Just a reminder, it's business as usual with remaining inventory of semi auto firearms at FFL's until Oct 24, 2024 when 4885 becomes law. Pricing is completely stupid from panic buying. May I suggest a trip to the mill in littleton, ma if you have time. IYKYK about the mill. I love to spread the word of misery when it comes to firearm laws in Mass. Older Fudds are waking up and are not happy with having to get a LTC to possess a Semi Auto Anything. Same response "I ain't doing she-it." Hopefully the petition to recall 4885 will happen and there will be a another year of business as usual for all the FFL's. If not most FFL's will close up shop. Until then hoping SCOTUS will hear 1 of 7 lawsuits ending this crap. Cheers!
@crankygunreviews
Ай бұрын
@@BigEdsGuns the mill is close to my work, but I’ve never been honestly. I do know about it though. I should stop in.
@mk2_suprr
27 күн бұрын
@crankygunreviews +1 for the mill in Littleton, theyll get you whatever you want, doesnt have to be on the list or pre ban. I suggest dean saftey and kagarms.
@crankygunreviews
27 күн бұрын
@@mk2_suprr interesting. Well, I guess I have a month or so to check it out.
@warrenharrison9490
Ай бұрын
Nice review, like the channel. 👍
@crankygunreviews
Ай бұрын
Much appreciated!
@jtns2845
Ай бұрын
good thing that i’m a revolver guy…
@crankygunreviews
Ай бұрын
I like those too, but the prices on revolvers will skyrocket if that’s all we can get…
@user-mz4hy4wj7z
26 күн бұрын
you can build any Glock you want, if you wanted to build a gn5 g20 10mm its totally legall
@crankygunreviews
26 күн бұрын
@@user-mz4hy4wj7z not for long, according to the new bill…
@user-mz4hy4wj7z
26 күн бұрын
@@crankygunreviews ya you only have till oct
@crankygunreviews
25 күн бұрын
Well aware
@gingerman6560
Ай бұрын
Nice pair of glocks. Are the all the guts the same as gen 3?
@crankygunreviews
Ай бұрын
@@gingerman6560 no idea
@donaldkgarman296
20 күн бұрын
ASK YOUR LOCAL CAREER CRIMINAL , I'M CERTAIN THEY WILL HAVE EVERYTHING YOU CANT LEGALLY HAVE IN THE LAND OF THE FREE .
@crankygunreviews
18 күн бұрын
Yep
@user-mz4hy4wj7z
26 күн бұрын
you can walk into a gun store and walk out with a brand new any model Glock any gen if anyone wants to know hit me up
@crankygunreviews
26 күн бұрын
I know how.
@user-mz4hy4wj7z
26 күн бұрын
@@crankygunreviews ma fucking sucks, I mean the new bill wont stand for long but for them to even do what they did is absolutely nuts
@crankygunreviews
25 күн бұрын
Yeah I know
@terrysummers6382
24 күн бұрын
You can buy them as parts and register as a complete gun online...
@crankygunreviews
24 күн бұрын
@@terrysummers6382 yes I know.
@user-mz4hy4wj7z
26 күн бұрын
why do people think you cant own a brand new Glock 20 5th gen in ma? all you need to do is build it buy a kit and register it then totally legal and transferable
@crankygunreviews
26 күн бұрын
@@user-mz4hy4wj7z yeah, for a lot more than an old Glock… you can’t buy a complete one in Ma.
@user-mz4hy4wj7z
26 күн бұрын
@@crankygunreviews no but you can buy each piece as a kit and assemble it before walking out and then you have a brand new gen 5 legal and around $700
@user-mz4hy4wj7z
26 күн бұрын
if you are interested in a brand new Glock whatever gen you want 100% legal and transferable let me know,
@crankygunreviews
26 күн бұрын
@@user-mz4hy4wj7z I’m good- the point was new ones cost a lot more- I’m fine with what I have now
@user-mz4hy4wj7z
26 күн бұрын
@@crankygunreviews ya I gotcha and what you have is very nice I own a couple, all I was trying to do was spread the word if anyone wanted one before oct cause like you said after that good luck
Пікірлер: 85