Just got flashbacks to watching your stuff that got me into the hobby 2 years ago, lol. Hope you're doing well mate
@VicFPV
2 жыл бұрын
Stuuuu G'day... got me into FPV with that 99$ 5inch quad video like 5 years ago. Great times..
@timn4481
2 жыл бұрын
bi blade props allow the motors to spin faster at a lower relative current draw. i wish back yarders would respect that this is engineering and the designers wouldve done the calcs and worked out the best performance for this setup is through using the config that it comes with.
@hazzahfpv6675
2 жыл бұрын
I've had the Cylinder of those motors (Mobula6) seperate from the top very frequently. Had to squeeze them back together and use tiny amount of superglue to secure them.
@DonJohnsonFPV
2 жыл бұрын
You rather use loctite 638 than superglue for that. Superglue don't like vibs or heat.
@hazzahfpv6675
2 жыл бұрын
@@DonJohnsonFPV that is a very good idea. Thank you :)
@pgabrieli
2 жыл бұрын
thanks, very well done as always! but PLEASE review the new Mobula 7 1S ELRS next. I think it's even better, even if it's less "tiny"
@Nathan_Adams
2 жыл бұрын
I agree, the 70ish mm whoops fly sooo good
@SilverbackSasquatch19xx
2 жыл бұрын
I have the Mobula 7 1s Elrs it’s fun definitely a quad you can have some fun with and impress yourself with how it develops your skills!
@Splode_
2 жыл бұрын
Agreed. The Mobeetle seems like a must-by whoop until you realise the much better Mobula 7 1S ELRS exists.
@nq0amark138
2 жыл бұрын
I also agree. I have the 7 and it's a blast to fly. I also upgraded to the more durable frame (2s) without noticing any real difference in the flight, and it actually flies better IMHO. Thumbs up on your comment.
@pgabrieli
2 жыл бұрын
@@nq0amark138 which “more durable frames” do you mean? the mobula 7 V3?
@Shauny_D
2 жыл бұрын
The optional canopy doesn't hold the FC in horizonally and you will pop out the FC from the side stand offs. A small slice of business card or cereal box cardboard from left to right posts will hold it together really well and stiffen up the frame a bit. Very noticeable difference in smoothness.
@oddeman3489
2 жыл бұрын
I have the Mob 7 ELRS and its great, fast agile and long fly-time on 450 lipo or 660.
@joshuamontgomery0
2 жыл бұрын
I really like my mob 7 elrs 1s - it actually gets better range than my geprc cinelog35 600mw vtx drone that I lost due to bad visuals last week. (I had GPS but it wasn't logging on my controller)
@MaxSMoke777
2 жыл бұрын
Lucky! I've been waiting on a backorder from GetFTP for over a month now.
@rp479
2 жыл бұрын
@@MaxSMoke777 Banggood and RDQ have them
@oxlydangerfield
2 жыл бұрын
Has anyone compared this whoop to the BetaFPV Meteor65 Pro? Which is better? The Meteor seems to have larger props and stronger motors, a bit lighter as well if I'm not wrong.
@ronnor58
Жыл бұрын
I was wondering if you could put together a video that would describe the 3 components that you would package together, if bought separately, a beginner system, like the little whoop style for 4k FPV. I want to experience FPV flying, but I'm still not sure that prepackaged kits are the answer? I want to fly mostly indoors, but that's not to say that I won't use it outside. I watch tons of your vids so I respect your advice, but I'm still not sure what to get. I'm not afraid to spend a little extra for quality, but it still should be reasonably priced. BTW if you recognize this question, I asked it on another one of your Videos, lol...I'm sometimes a bit impatient. Thank you for all of your content, it is invaluable to newbies like me.
@howducksfly9948
2 жыл бұрын
give us mobeetle 7. diamond vtx with 0802s.
@POLARISFPV
2 жыл бұрын
Angry Don is angry? You don't say...
@davincimachen5517
2 жыл бұрын
Bro, just got the betafpv cetus bundle, within an hr, landed in my kids pool, got it out, unplugged and with the luck of the gods and a hair dryer, it still works lol, 7 drones later lol 😆 It's a bit scared but she still flies lol
@mothwaltz4163
5 ай бұрын
Thanks for the detailed review and for reminding about perspective.
@barrycooke6874
2 жыл бұрын
Love your videos JB. I think people are missing a trick with the carbon frame. Lots of people in the world live in urban environments or other compact living scenarios. A 65-80mm carbon frame allows you to rip balls outside with a lot of the freestyle characteristics of much larger quads. They’re so much fun and flyable. And the crucial thing is they’re so quiet it’s much harder to disturb others or draw attention. Yes a toothpick style 2s etc will fly a little better but everything bigger is louder. Flying “under the radar” is really useful nowadays.
@justalex7416
2 жыл бұрын
Agree, I have the flywoo firefly and they are incredible silent with 16500kv and biblades.
@ignacioinnovo5308
Жыл бұрын
Hello Joshua! Your videos are just great! Thanks for producing such good content. I want to tell you that the Meteor65 2022 edition has been recently released. Would be great to watch your review! Greetings from Argentina!
@djleighl
2 жыл бұрын
Hi Joshua have you looked at the Mobula 7 1s?
@pgabrieli
2 жыл бұрын
quick note: the canopy provided is NOT the standard Mobula 6 canopy, it's the new type, also available on the Mobula 7 1S, which has FOUR mounting points instead of just THREE as on the Mobula 6
@gonebdg
2 жыл бұрын
Yes ... but I think you are a bit confused. Currently there are MoBEETLE, MobLITE and MobuLA. What Josh review here is MoBEETLE6 with different 3d print canopy, 0702 motors and DIAMOND FC F4 aio. Back in the day where the 1st mobula released it only 75mm and the canopy actualy represent of Mobula fish.
@bbsheppo
2 жыл бұрын
@@gonebdg I think he's correct, not confused.
@eedok
2 жыл бұрын
@@gonebdg the mobeetle comes with both the 3d print canopy and the new 4 point mobula style canopy
@gonebdg
2 жыл бұрын
@@eedok hmm ... what I know from official release HM site the 4 point plastic canopy is for mobula7 while the 3 point plastic canopy is for mobula6 however both are interchangeable. The 3D print canopy low profile style is for moblite6/7 and the 3D print "beetles" style is for mobeetle6 and no official mobeetle7 yet at the moment. All of those canopies surely interchangable for standard whoop.
@pgabrieli
2 жыл бұрын
@@gonebdg I’m referring to the hard plastic canopy provided as optional with the mobeetle, which JB said it’s the “standard Mobula 6”. it’s not, as per my original comment. I’m not confused nor confusing. you are 😂
@fluoxethine
2 жыл бұрын
You haven't seen Mobula6 HDZero?
@gravit8ed
2 жыл бұрын
geprc smart16 is basically a tiny whoop without guards and a carbon frame. I fly it outside. two-piece bell even.
@Lucas-in7db
2 жыл бұрын
Hello you are one of the best if not the best fpv KZitemr I’ve seen you have gotten so good over these years keep it up
@avgvstvs96
2 жыл бұрын
JB this is important - the Mobula 6 you compared is the old version, the new version comes with ELRS and the same smaller size 0702 motors as the Mobeetle but 26000KV which is too high. The new Mobula 6 (green frame) is totally not comparable to the Mobeetle, it's much less powerful because the Mobula is a lot heavier, so I think it's important that people know that the Mobula you say is more powerful than the Mobeetle is actually not available anymore! **EDIT The older Mobula IS available from some retailers like RDQ, but not with ELRS, it comes in the clear frame with only the outdated Frsky, flysky, and dsmx protocols.** In addition I'll add my experience regarding the Mobeetle which slightly contradicts yours, maybe because I was flying the much slower mobula 6 elrs I found myself really really happy with the power from the mobeetle on 300mah HM batteries even though they're overweight, my smaller batteries couldn't fit because the pigtail is too short, shorter than JBs making it completely impossible to plug it in. The quad felt fast and nimble, I was very happy with it. Video is not as good as the mobula of course but this is acceptable for less weight. I recommend the Mobeetle for sure. I flashed mine with bluejay but some prefer not to, if you do it's best to have an 120hz overclock.
@bradleybeaudry8935
2 жыл бұрын
The newer diamond f4 boards have built in programmable LEDs as well. Out of all the reviews on this quad, nobody has mentioned this.
@big-smoke-rc
2 жыл бұрын
Mine have the LED's on the front, but I have no idea how to set them up..
@eedok
2 жыл бұрын
They removed the LEDs on this revision
@isavv_
2 жыл бұрын
What about betafpv Meteor65 pro? build in ELRS and 350mw vtx.
@big-smoke-rc
2 жыл бұрын
Sweet. I've been flying these for a few weeks now.. they're great. Dump the canopy - it lets the camera wobble, and doesn't protect the copper aerials... the included old style canopy has four points.. no jello, and shrouds those aerials. Put it in a meteor frame. It'll be indestructible. Stick a bt2.0 connector on and use some betaflight batteries. I suspect Angry Don is just a little bitter because he didn't expect such a commercial trade off. That's fair. I can understand that. But I can also see why HM wanted to offer something a little more than another, lighter whoop. They already had a superlight ELRS 65 whoop.. so they needed to spend money on a gimmick to differentiate this, and I guess that was the carbon frame..
@DonJohnsonFPV
2 жыл бұрын
I'm bitter cause it can have been sub 16g, but it's 17.5g, it can have better cam but no it's worst than what we have 2 years ago, it can have molded canopy but no they prefer to use my worst design... the included other canopy didn't come with cam holder... Meteor frame is durable but is a notorious motor killer cause lower motor than battery and duct lack of rigidity... And please no BT2.0 on such a efficient quad !!!
@big-smoke-rc
2 жыл бұрын
@@DonJohnsonFPV great response! Appreciated! I mentioned the cam sling in another comment. That was a bummer, and a total oversight in my opinion as it makes the canopy useless to many. I need the bt2.0 because I thrash the shit out of my quads :/. The included connector always goes to shit for me with loose connection. Same reason why I feel OK to weigh mine down with the canopy and meteor frame - I need durability over slight performance. Haven't burned a motor yet on 4 drones though. Maybe I'm lucky. But I have several completely shredded mobula frames so maybe I'm unlucky instead! Usually they break at the tray and at the duct standoffs :s What cam would you have recommended? I thought this cam was pretty well liked?
@Cre8ionz.
2 жыл бұрын
@@big-smoke-rc better FPV Cam would be "Caddx Ant Lite" or "Foxeer Pico Razer" (haven't tested the Foxeer one, but the Ant & Ant Lite are much much better than the RunCam Nano3. and it's also quite good in low light (normal Ant is little bit better, in low light)
@miquelmarti6537
2 жыл бұрын
Indestructible. Just wait for the next AIO esc to blow. I love micros, but I can't even count how many little dead boards I've already accumulated. It was too expensive. Nowadays I only fly toothpicks because 12A esc's are reliable. BTW foxeer pico razer is the best whoop cam I'v found (I dont like runcam nano or caddx ant). Then comes ratel nano 2 for the toothpicks, and finally runcam phoenix nano 2 for the bigger ones. Also I would advice to use PAL, as the extra NTSC refreshrate doesn't show up in the googles thanks to the mild ghosting effect of the LCD's.... on the computer screen it's another story as PAL uses to playback poorly when converted to digital.
@miquelmarti6537
2 жыл бұрын
@@DonJohnsonFPV I like Pico razer camera. Wich canopy would you recommend for such a micro? Also, do you have any advice to stop burning more aio boards? Merci
@fpvpilot5818
Жыл бұрын
Love u bro, your videos have always helped me❤
@richardsmithson4227
2 жыл бұрын
Mob7 hdzero! Elrs!
@luisvinanzaca9068
Жыл бұрын
what gauge copper wire should i use to replace the vtx wire on the FC?
@sotagoat4623
10 ай бұрын
Awesome vid!!!!!! Thx for instruction and excellent reviews
@fpvtv2222
2 жыл бұрын
Another great video Josh! I love tiny whoops. They are so nuch fun and inexpensive to run. What tiny whoop is your go to so far? Do you like the nitro necktor better then the 450mAh ones with the bt2.0 conectors from betafpv?
@MCsCreations
2 жыл бұрын
Pretty fantastic flying and review, Joshua! 😃 Maybe I repeat it too much... But I definitely mean it! This little quad is sweet! Anyway, stay safe there with your family! 🖖😊
@Samsunwhoop
7 ай бұрын
Thanks Josh
@balajiprasad9046
2 жыл бұрын
Hello JB..the mobula 6 has been upgraded to 0-400 mw openvtx as well.
@Fpvfixit
2 жыл бұрын
What
@balajiprasad9046
2 жыл бұрын
@@Fpvfixit Yes have a look at HM web page... infact most of their tiny whoops even the moblites are upgraded to 0-400 mw
@ericsimmons4204
Жыл бұрын
Why is is a bad whoop for inside. Sorry I must have missed that part
@mikehar2210
2 жыл бұрын
my guy put gates on the tree... yeah man.
@johncarold
2 жыл бұрын
Hi Josh Great video and review of the Mobeetle 6is is great. And yes this is the beast F.C for your micro's right now. And is the reason why I have been thinking about switching a Crossfire transmitter for a ELRS transmitter. I hade a set of Mobilly gates that I have been practicing with my mobula 6. I like your track and yes nitronector is the best batteries. I can't wait to see you have Blunty over for a race. I need to build a new mobula 6, using the new F.C and the Caddx ant. I think I would stay with the 25,000kv and turn it down in Betaflight this way if I ever get good enough to fly without hitting something LOL Thanks again for the video and information.
@JohnCuppi
2 жыл бұрын
Do it!🤘 ELRS whoop boards are definitely not going away. SPI ELRS will be gone eventually, but it’ll be integrated as a uart.
@cohibamatt8117
2 жыл бұрын
The Caddax ant is the best whoop camera. Light and good picture quality.
@RiiiBread
11 ай бұрын
The motors on my Mobula6 ALWAYS seperate. i have to put them back together at least twice a sesh. How could the two part motors possibly be better for cooling? Unibell has bigger holes and the solid mass allows the heat to transfer easier. Am I missing something?
@jcjven19
2 жыл бұрын
I got that drone. should I turn on the Air Mode?
@abracadaver7687
Жыл бұрын
Is ther any better dvr in 2023 analogue ????
@DyoGTS
2 жыл бұрын
I strongly disagree on the statement that the split bell motors are better than unibell. If you swap to the Meteor65 frame, as many of us do, you’re landing on the motor screws instead of landing on the battery - this causes more downward force on the motors and increases the tendency to slip the bell. I personally avoid split bell motors at all cost. For anyone looking at emuflight, I strongly recommend looking into Quicksilver. While it may not have all the features, it is has significantly improved flight performance, especially with whoops, when compared to Betaflight.
@JoshuaBardwell
2 жыл бұрын
Quicksilver is great, but aren't there limited choice of FC to run it? And no ELRS support.
@DyoGTS
2 жыл бұрын
@@JoshuaBardwell Flight controllers are limited, yes, but pretty much every whoop FC is supported, with more being added all the time (I just flashed an old omnibus F4 to run it on 5” as well). As for ELRS, they’ve had it working since late 1.x. All my race whoops are running QS + ELRS, some SPI and some serial RX. I highly recommend revisiting it!
@truthbw1
2 жыл бұрын
Seen a few other decent mobeetle 6 reviews. Love this one. Loved the benchmarking with the mobula6.
@adrianau4246
Жыл бұрын
If I were to get lower kv motors soldered up , what else would I have to change on the fc to make it fly normal.
@LEO_FLY4JOY
2 жыл бұрын
You've cleaned your room😛 So clean and tidy
@gnarlyblasterboys4123
2 жыл бұрын
Hi dude! Is express lrs the way?
@avgvstvs96
2 жыл бұрын
yez
@cualeslarisa21
2 жыл бұрын
It looks shinny, is it conformal coated?🙌🏻sick video still🙌🏻🙌🏻🙌🏻
@crashannburnFPV
2 жыл бұрын
Thanks for another informal video! I wish these was available to get in Norway.
@johnwalter6410
7 ай бұрын
You cant get whoops there??
@crashannburnFPV
7 ай бұрын
@@johnwalter6410 They are now :) Norway is just a bit slow to keep up with the fun stuff.
@DavidOwensuk
2 жыл бұрын
Great video Jb
@1lovelucas
2 жыл бұрын
I need to get on the happy model hype train
@adinow6264
3 ай бұрын
Can I connect Crossfire nano rx ???
@raceprofpv6687
Жыл бұрын
My mobula 6 motors the black side keeps falling down to prevent me from flying
@BNIRc
2 жыл бұрын
How do you think this compares against the new newbie drone v2 board and whoop? Great channel and info bro.
@MrBuddy7798
Жыл бұрын
nice flying
@michael67612
Жыл бұрын
Bought this because the mobula 6 elrs is so hard to get in oz rn
@cohibamatt8117
2 жыл бұрын
Open vtx has issues where is will change to 0mW in the middle of a flight. You can work around this by removing the 0W in the vtx power.
@JohnCuppi
2 жыл бұрын
Had no idea about this problem. Thanks for the heads up. Does it switch and stay on 0mw, or does it do that intermittently?
@cohibamatt8117
2 жыл бұрын
@@JohnCuppi it stays on 0mW until you change it to a different power and reboot. I removed the 0mW and it seamed to stop.
@avgvstvs96
2 жыл бұрын
@@cohibamatt8117 i didnt notice this on either of my open vtx whoops
@cohibamatt8117
2 жыл бұрын
@@avgvstvs96 this happens on both my open vtx boards, Happy Model and Flywoo , and my Happy Model AIO x12. It isn’t a deal breaker for me because I do not race, and I continue to purchase open vtx to help support the project. Interesting that it doesn’t happen to you though and I am curious what the difference may be, may be something in the settings?
@propphotographyaz9992
2 жыл бұрын
Great video, as always.
@dubzsquaredfpv7171
2 жыл бұрын
Have you tried the Mobula6 ELRS version? It comes with ELRS (ceramic antenna) and 400mw OpenVTX. It's a solid, reliable FC. The only criticism is that they paired a heavier build with the 0702 motors, which were designed for a lighter build like the Mobeetle.
@dg9bfc
2 жыл бұрын
ah somebody had a similar idea as I just had ... grin ... take best of both ... bigger motor, bigger vtx and the elrs ... (and the "over" power maybe could lift a bigger battery to have longer fun?!?)
@lightbulbjim
2 жыл бұрын
I prefer that FC to the diamond one, since I don't like the copper wire antennas (I've had them break on me).
@avgvstvs96
2 жыл бұрын
Yeah the mobula 6 elrs is a problem honestly, WAY WAY WAY TOO SLOW. I made another comment bringing JBs attention to the fact that the mobula he showed is no longer for sale.
@dubzsquaredfpv7171
2 жыл бұрын
@@avgvstvs96 Well, the Mobula6 is still available, but it is the V2. It is the same as the original except the new gyro and they switched the VTX to OpenVTX. The Mob6 ELRS isn't slow per se, but the 702 motors don't do as well with the extra weight of the heavier FC and canopy. If you switch those out to 802 or 603 motors, it rips. For now, it is my preferred FC.
@avgvstvs96
2 жыл бұрын
@@dubzsquaredfpv7171 you say its the same as the original, its not. Smaller motors. Much slower. Bad buy compared to the old one
@LowVoltage_FPV
2 жыл бұрын
I'm looking forward to trying one of these out. I have a M6 as well as a Mobulite 7.
@Shibtember
Жыл бұрын
What batteries did you use for the mobula?!?!?!?
@ToddBurke42
2 жыл бұрын
My Mobula6 in parts in a plastic bag because I burnt that ring pad where the antenna solders on...plus the motor sleeves where always sliding down so I like that the newer one isn't like that. The Mobula7 ELRS though I think is worth the extra weight because you can run the 450 and 520mAh batteries and it's got real antennas (not to mention those nice beefy 1.5mm motor shafts). I find I can fly the Mobula7 with allot more confidence because when I hit the throttle it just feels like I have better control than my Mobula6 did. Just not crazy about the camera though so looking forward to the Mobula7HD version.
@devilsreject78
2 жыл бұрын
How far do people really take a whoop though I mean honestly most of the time you need that wattage in the VTX for penetration not really range so much at least from what I've seen and my experience and my usage experience
@JoshuaBardwell
2 жыл бұрын
Range and penetration are the same thing. Range is just easier to test.
@tomboxyz5564
2 жыл бұрын
@@JoshuaBardwell range is just penetration through air
@tamburavadak
Жыл бұрын
Couldn't you just put the Diamond FC into the Mobula 6?
@hateeternalmaver
2 жыл бұрын
I can't seem to find the link to your Betaflight/ EMuflight comparison video int he description...
You see the issue with my original meteor 65 is that it only gets 2mins and 10sec of flightime, 4mins on a tiny whoop is something I'm looking for.
@avgvstvs96
2 жыл бұрын
its the weight. make it weigh 17g dry and youll get 4 minutes
@DonJohnsonFPV
2 жыл бұрын
@@avgvstvs96 No it's the motor, Betafpv 22000kv (especially the old one with bearing) are less efficient than any 25000kv available
@bengordon7635
Жыл бұрын
Just got the mobula7 the esc no.1 firmware says yyyyyyyyy-yyyyyyyy the others are correct firmware drone flips on take off motor one starts and stops , you cannot flash esc on Blheli the flash button is whited out anyway to fix the esc or flash esc another way
@mmm-jn3cw
5 ай бұрын
1:55 - Mobilite6 has only 200mw VTX and not 400mw.
@lillmasen
2 жыл бұрын
can I buy mobula 6 with futaba reddy?
@Romanian_Productions
2 жыл бұрын
Thank you for the video, JB!
@KCQuadTronX
Жыл бұрын
so cool
@Vousie
2 жыл бұрын
Problem with the 400 mW VTX is when you're racing you have to use 25 mW and I don't know about you, but I get pretty good range at home. It's at races where there's 4 other quads in the air that video is terrible. AKA. I'd rather have a 25 mW VTX with a good antenna on it than a 400 mW VTX with a piece of wire for an antenna.
@DonJohnsonFPV
2 жыл бұрын
That's cause smart audio is wrongly setup, 25mw is way lower than that from what Phobos told me.
@Vousie
2 жыл бұрын
@@DonJohnsonFPV I don't get what smart audio has to do with this. 1) Races are limited to 25 mW. 2) Races have more interference from more VTXs being on. Thus a better antenna is worth more than higher output power.
@DonJohnsonFPV
2 жыл бұрын
@@Vousie you missed the point, on 25mw setting this VTX is a lot lower than 25mw that's why others blasting you will flying together.
@Vousie
2 жыл бұрын
@@DonJohnsonFPV It's not any lower. The guys at the races have an rf meter to check that everyone's at about the same output power.
@ominguti6345
2 жыл бұрын
I wish someone compares performance of a ufl connected monopole antenna with just a piece of wire. I wouldn't be surprised if the difference was marginal when the wire was bent away from the pcb.
@kelvinlee7956
2 жыл бұрын
I think this type of design is not for everyone. We have lot of RMA that people crash and damage the fc because there is no protection on top of the FC. This is just my opinion base on the customer service side.
@JoshuaBardwell
2 жыл бұрын
I feel like the injection molded canopy with 3 point contact is better protection.
@T418L
2 жыл бұрын
I totally agree, some want it too fast for racing more than durability or flight time, that's make it break easier than Mobula, I saw Albert kim review FC AIO pop out from screw.
@avgvstvs96
2 жыл бұрын
@@JoshuaBardwell yes, i'll be using the heavier canopy instead. also JB see my other comment, the mobula you compared against is the old version no longer available, new version is significantly worse much slower, smaller motors heavier weight, we don't want people buying it because they think it might be faster than the mobeetle, the mobeetle actually felt amazing in comparison.
@raptor660rrr9
2 жыл бұрын
can I link this to my dji v2 with a analog receiver? I want to buy some of these so my son can learn to fly were both new to fpv thanks.
@JoshuaBardwell
2 жыл бұрын
Yes, the video signal sent by the quad can be picked up by an analog receiver hooked into the AV input on the V2 goggles.
@raptor660rrr9
2 жыл бұрын
@@JoshuaBardwell Awsome thank you for responding! You have been my go-to in this hobby and I can't thank you enough.
@styxenstones3329
2 жыл бұрын
I wonder if it would be better with a different battery connector. I've been running the bt2.0 on a very similar build and it seems to perform a lot better
@avgvstvs96
2 жыл бұрын
the ph2.0 is all thats necessary on a whoop as long as it's solid pin. the crimped pin ones are definitely not good enough, but the sold pins are all you need with no extra weight. bt2.0 and gnb27 add too much extra weight and the connectors are SO expensive that I feel like it's so important that we generally boycott buying them until they start selling 100 packs for $20 not 5 connectors for $10 like the bt2 and gnb27 jokes, imagine having to spend $40 to convert all your batteries? anything that really needs more than a ph2.o should go straight to xt30s
@1969jfp
2 жыл бұрын
I've broken elrs ceramic antennas off 2 whoops. Do you think I could solder a ceramic wire antenna on them?
@JoshuaBardwell
2 жыл бұрын
Yep absolutely.
@1969jfp
2 жыл бұрын
Thank you
@runpuppyfpv5744
2 жыл бұрын
Are you going to review the flywoo venom?
@marinebymistake
Жыл бұрын
Would you recommend this drone as the first indoors drone instead of Meteor65 pro? It's really hard to pick one, seems like they are pretty similar.
@parker1ray
2 жыл бұрын
And he is called Angry Don Why?
@Shauny_D
2 жыл бұрын
The "unibell" 0802 motors on the new mob6 and others are NOT unibell. The surround will still separate from the top. I have 23 of these so called unibell motors with separated bells. (IGOW killed them quick)
@DonJohnsonFPV
2 жыл бұрын
That's it, like I show to joshua I have a full box of dead motor with more sliding magnet than sliding bell...
@Shauny_D
2 жыл бұрын
@@DonJohnsonFPV yes! The magnets just fall out constantly. I have a pretty even split of bells separated and dropped magnets with 65mm. For 75mm with same motors it's mostly broken shafts or split bells. I'll Frankenstein the busted ones together.
@juliannojungle
2 жыл бұрын
About range, I have a whoop with TBS crossfire nano receiver and Unify nano Pro32 (which also go up to 400mW). It flies GREAT and range in very satisfying for a whoop.
@pgabrieli
2 жыл бұрын
... and? 😂
@jeffclassics
2 жыл бұрын
There's new one, mobula 6 elrs + hdzero in 1s.
@nyclassic4ever130
2 жыл бұрын
Idk why it isn't very popular in the US. 🤔
@akitaishi
Жыл бұрын
The mobeetle 6 isn't 25 grams, Joshua bardwell. It is below 18 grams. 🤷♂🤷♂
@JoshuaBardwell
Жыл бұрын
At 22:08 in the video, I weighed at 18g without battery. How much does the battery weigh?
@rwseif1961
2 жыл бұрын
I got the Mob 6 with the built in ELRS (Green Frame) and it has the SE0702 26000KV motors and 2 blade props and a uFL connector with a Dipole antenna for the VTX that has 25, 100 and 400 mW configured - so part Mob 6 and part Mobeetle....
@avgvstvs96
2 жыл бұрын
try to get the weight down, it'll fly so much better, honestly 0702s on the full size mobula 6 elrs is a serioues mistake, too heavy for those tiny motors, I needed quad blade props to enjoy flying it
@DonJohnsonFPV
2 жыл бұрын
@@avgvstvs96 and with 4 blade you will get less than 1mn flight time...
@avgvstvs96
2 жыл бұрын
@@DonJohnsonFPV omg why do people keep repeating this like it’s fact? It’s pure bullshit to say 4 blade props on the mobula 6 elrs get 1 or 2 minute flight times. I get 2:45-3:00 on 260mah batteries and 3:30 on 300mah batteries. The Mobula 6 ELRS is slow and not recommended AT ALL with biblades, quad blades are the only way it flew decently and only got 10-15 seconds less flight time than biblades. I don’t understand why everyone assumes 1 minute flight time, clearly nobody who says that is speaking from experience just speculation, so please Angry Don don’t spread this misinformation because this is the fifth time I’ve had to correct someone, people really really believe it and its couldn’t be farther from the truth. Anyway thanks for what you’ve done for the hobby, I appreciate your influence on whoops and the Mobeetle I just got is excellent.
@stevejobs5
2 жыл бұрын
Where are the battery links?
@JoshuaBardwell
2 жыл бұрын
Sorry about that. www.fpvknowitall.com/fpv-shopping-list-tiny-whoop/#whoop-battery-chargers
@daryoushborja5115
2 жыл бұрын
Thank you I want this quad.
@KOrnhOliO1
2 жыл бұрын
Or, maybe Angry Don is just Angry! 🤷🙄
@mashyoto4646
2 жыл бұрын
I have had problems with mobula6 motors spliting apart.
@bertbeinaaf8314
2 жыл бұрын
Whoops rule😎 That’s my opinion at least…. I’ve build a 4” and 5” cruiser in the last year. And i really liked building them. But i fly them rarely, i prefer my old ET115, Mobula7 (the original) and the UK65. Or is it just that crashing them is way less expensive 🤔😂 This one is nice, but i will not buy it. If one component fails, the whole quad is dead…
@boominfree7408
2 жыл бұрын
I updated my mobula 6 to 4.3 with the factory software and it’s stuck on pit mode
@cohibamatt8117
2 жыл бұрын
Try removing the 0mW and 25mW power in your vtx and see if it comes back.
@boominfree7408
2 жыл бұрын
@@cohibamatt8117 ok will try
@gravit8ed
2 жыл бұрын
try going through the on screen display to turn it off sometimes they get locked in via the firmware
@JC-qy6cx
2 жыл бұрын
Pointless upgrading a whoop to bf4.3. Revert it back to factory.
@boominfree7408
2 жыл бұрын
@@JC-qy6cx has a problem from factory vtx acting weird I would have to switch power to get decent range every time I swap battery
@tiagotiagot
2 жыл бұрын
Is it a concern that there's so much of the circuit board left exposed like that instead of protected by plastic?
@fitchyyboi
2 жыл бұрын
no lol it's a whoop
@tiagotiagot
2 жыл бұрын
@@fitchyyboi Are you saying that at the speeds it goes, hitting some hard pointy surface is not gonna crack any vias or dislodge any components?
@DonJohnsonFPV
2 жыл бұрын
@@tiagotiagot Still better than moblite 7 with totatly unprotected FC siting 2mm higher than everything else...
@IamG3X
2 жыл бұрын
Newbie here. Is there a digital version of this? Or something similar to this
@imothy
2 жыл бұрын
duude i like your whoop race track, get TWGO to make it a track!
@steveeb00
2 жыл бұрын
I just ordered a Mobeetle6 from BG through your link and they offered me a Runcam Thumb 1080p 60fps camera FREE!?! I checked out and I got the order confirmation email with the camera for $0. Real?
@hateeternalmaver
2 жыл бұрын
The Mob7 was my very first addition to my 5". Perfect addition at that! ^^ It got upgraded w/ Diamond F4, Diamond vtx 200mW and 0802 - 19500kv motors over the years as well. Oh and EOS Turbo camera but I didn't really like that one. ;)
@nich532
2 жыл бұрын
Greetings sir I must commend you an the quality work that you have been doing... I have a problem that I think only you can help me solve . I just purchase a mamba mk4 h743 FC for a 7 inch build but it's just not arming in beta flight, the error is rxloss and I have change the receiver not once but twice from working quads so I know it's not the receiver l also updated the firmware and it's the same thing.. the radio is running edgetx and the receiver is elrs... I really don't know what's really happening... so any advise would be greatly appreciated.
@skree_fpv436
2 жыл бұрын
Some things to check. In the ports tab in Betaflight is serial rx checked on the correct number uart? Also in BF, is the receiver type set to serial and the protocol se to CRSF. Make sure TX on the receiver is connected to RX on the FC and vise versa. In EdgeTX is the the internal module set to off and the external module on and set to CRSF?
@nich532
2 жыл бұрын
@@skree_fpv436 thanks for responding yes all those things are already been cheched
@skree_fpv436
2 жыл бұрын
@@nich532 Have you tried connecting it to a different uart?
@nich532
2 жыл бұрын
@@skree_fpv436 no I did not try a different one apart from the default which is quart 1
@skree_fpv436
2 жыл бұрын
@@nich532 Okay. Definitely try another uart. Some flight controllers have issues with elrs on uart 1.
@Ender_FPV
2 жыл бұрын
Betafpv 85X Digital has the range you seek in a whoop.
@SuperHalo222
2 жыл бұрын
ordered my mobeetle in may and bangood says it won't ship till june 26th
@jkwilson35
2 жыл бұрын
Hi, will a racedayquads 450 1 cell battery fit this quad?
@JoshuaBardwell
2 жыл бұрын
No it's too wide to fit in the slot on the frame.
@jkwilson35
2 жыл бұрын
@@JoshuaBardwell Thank you for your help.
@edgararcega3046
2 жыл бұрын
I wonder how dji's whoop is going to do. I returned my tiny go 4k when i found out the DJI mini is coming out soon
@big-smoke-rc
2 жыл бұрын
Anyone got any pid tunes to share for this?
@JoshuaBardwell
2 жыл бұрын
It basically comes with Angry Don's tune, but he has a suggested tune on his channel, as well as other updates he suggests.
@big-smoke-rc
2 жыл бұрын
@@JoshuaBardwell I just checked it out. Sick vid. 🙏🏻
@SMITHII_
2 жыл бұрын
I have been out of the whoop class for a while now.. are these things still able to take 2s batteries? I have a bunch of 300mah 2s packs from previous brushless whoop adventures, I'd rather they be put to use again instead of buying new packs.
@JoshuaBardwell
2 жыл бұрын
This one is 1s only.
@MaxSMoke777
2 жыл бұрын
I'm confused, am I the only person with a Mobula 6 that has a 400 mW video transmitter? I didn't modify it. It came that way. As for the Mobula 6's power, I fly it outdoors all the time even in 25 mph winds. It flies like a dream and I barely noticed the gusts.
@T418L
2 жыл бұрын
If you are talking about mobula 6 elrs, 1st patch was 200mw then they upgraded it to 400mw and changed the gyro from MBU to ICM.
@cohibamatt8117
2 жыл бұрын
The original mobula 6 boards were only a 200mW vtx. The new version is up to 400 mW
@Shauny_D
2 жыл бұрын
Mine ended up with 19000kv 0802 motors, a bt2.0 connector and moblite canopy. So basically a moblite6.
Пікірлер: 289