Glad to have found your channel thanks to Lincoln St Woodworks!
@WoodcraftBySuman
2 жыл бұрын
Glad to have you here! Welcome welcome!
@Lincolnstww
2 жыл бұрын
I like thin cuts and I cannot lie
@WoodcraftBySuman
2 жыл бұрын
Those other big slabs cannot deny
@WoodworkingYouTubers
2 жыл бұрын
@@WoodcraftBySuman That when a thin strip is cut like itty bitty lace And it breaks in Suman's face, You get sprung, Wanna pull up tough Cuz you notice that wood was stuffed
@joewatts7942
Жыл бұрын
Thanks for your videos all are very well done and easy to understand and useful.
@WoodcraftBySuman
Жыл бұрын
So nice of you to say. Glad you like them!
@jakeanator2004
2 жыл бұрын
This is an awesome jig! Great idea!
@WoodcraftBySuman
2 жыл бұрын
Thanks Jake! Glad it was useful
@CurseTheDarkness
11 ай бұрын
You can buy 608 skateboard bearings that are cheap and plentiful. Use a 5/16ths bolt for the bore. There will be a slight slop but it shouldn’t matter because the wood will keep the bore pressed against the bolt. You can make a couple wraps around the 5/16ths bolt with teflon plumbers tape if you really want a tight fit between the bearing and the bolt which is useful for other purposes.
@augustpineworkshop
Жыл бұрын
I've run into this exact problem before and I ended up with 12 pieces that were all different thickness lol. Thanks for sharing this great idea!
@WoodcraftBySuman
Жыл бұрын
haha. eyeballs are only so accurate. Def give this jig a shot! Works pretty well.
@clutteredchicagogarage2720
Жыл бұрын
This is a very nice jig. I've seen other people make similar thin-rip jigs, but I think your jig may be one of the nicest that I've seen.
@thedelawarevalleyworkshop
2 жыл бұрын
Lol, you just saved a bunch of people $129 by not having to buy from the big red bird company. Excellent video. Making one this weekend
@WoodcraftBySuman
2 жыл бұрын
Ahh the pricing from the big red company never ceases to amaze me. Haha. Let me know how your build goes! Hope you like it.
@alantag72
2 жыл бұрын
Excellent, I like the addition of the bearing.
@WoodcraftBySuman
2 жыл бұрын
Thanks! Yea the bearings really help with the glide. Little luxuries in life. Haha
@mackenziemill
2 жыл бұрын
oh gotcha very informative. The table saw still scares the BeeJesus out of me. Thanks Suman
@WoodcraftBySuman
2 жыл бұрын
Router tables scare me more.
@WoodworkingYouTubers
2 жыл бұрын
Nice jig but my cheap fence on my cheap table saw would be a nightmare in this process. Thanks Suman.
@the_1_ok_gamer
Жыл бұрын
Cut some strips last week, hated it. Saw the thumbnail for the video, and the heavens parted and angels sang. 🎉 Can’t wait to make this.
@brentjenkinsdesigns
2 жыл бұрын
Very cool. Thanks for sharing this.
@WoodcraftBySuman
2 жыл бұрын
My pleasure. Thanks for watching!
@Duncwoods
Жыл бұрын
Amazing
@AlienLeader4
2 жыл бұрын
Thats awesome innovation. Woodpecker just release their version of this jig. I am sure making it cost way less. Keep up the great work.
@WoodcraftBySuman
2 жыл бұрын
Haha I had no idea they were releasing it at this time. Hilarious coincidence. Thanks for watching!
@bruce-le-smith
2 жыл бұрын
great video, thank you! subscribed
@ErinAkil
2 жыл бұрын
GREAT jig! I have seen similar ones before but I like your design the best
@WoodcraftBySuman
2 жыл бұрын
Thank you so much! I hope you make one for your shop
@TheWeekendWoodshop
2 жыл бұрын
I gotta say, this is an absolutely fabulous idea. Thanks for sharing!
@WoodcraftBySuman
2 жыл бұрын
Thanks so much! I’m glad you liked the jig
@TheWeekendWoodshop
2 жыл бұрын
@@WoodcraftBySuman Indeed I do. Thin strips can be challenging for sure. This jig seems to be a really neat solution.
@TorBoy9
2 жыл бұрын
This is a pretty important jig. Instead of a bearing I put in a wood screw, which you can micro-adjust. Without such a jig, ripping thin pieces of wood is difficult and can be dangerous.
@vmoutsop
Жыл бұрын
Love this project. But for those who don’t want to make one, Amazon has them for $29
@MRMAN5551
2 жыл бұрын
Great video man keep it up!
@WoodcraftBySuman
2 жыл бұрын
Thank you so much!
@RhinoWorks
2 жыл бұрын
great jig and explained perfectly. thanks so much, this goes on the list of future upgrades. 👌
@WoodcraftBySuman
2 жыл бұрын
Yesss! Love a good jig build. Hope you like yours when done.
@misiumalowany
2 жыл бұрын
Hi. Absolute must have for anyone planning/building canoes from strips! Thanks!!
@WoodcraftBySuman
2 жыл бұрын
That’s a great point! Completely overlooked the importance of something like this for canoe strips!
@mazeroo41woodworking
Жыл бұрын
This is rad! Just found your channel and really enjoy the straight forward presentations. Thanks for the new inspiration!
@terristroh3965
2 жыл бұрын
Just in time for my next project.
@WoodcraftBySuman
2 жыл бұрын
Good thing we have a 3d weekend coming up!
@snodklop
2 жыл бұрын
Thanks! Ive had one of these in my brain for a bit, but love your 45 cuts for a sliding dovetail style adjuster. Perfect!
@WoodcraftBySuman
2 жыл бұрын
Glad it was helpful! Super simple and quick build. Hope you give it a go!
@billymacmakes
2 жыл бұрын
Oh I like this. Much better than eyeballing it to get even thicknii 🤣
@WoodcraftBySuman
2 жыл бұрын
Love a good eyeball technique haha
@nightwing321
2 жыл бұрын
Can someone explain to me why you wouldn’t just use a feather board? I feel like I’m missing something.
@WoodcraftBySuman
2 жыл бұрын
Feather boards are flexible or magnetic ones have a tendency to move. But you can absolutely use those to make thin rips as well. Just need to be a little bit more mindful
@nightwing321
2 жыл бұрын
@@WoodcraftBySuman appreciate the answer!
@mdsarker8972
2 жыл бұрын
Good thinking
@shawnkirsch
2 жыл бұрын
Wooo
@WoodcraftBySuman
2 жыл бұрын
According to Google, your comment qualifies for translation services. So I will reply with “gracias, senor”
@shawnkirsch
2 жыл бұрын
@@WoodcraftBySuman denada!
@su-mu
9 ай бұрын
4:13
@awildschuetz1
2 жыл бұрын
Pretty nifty, Suman! Neil Pask made something similar with a carriage bolt instead of a bearing, but I like your design better. Sorry Neil! 😂
@WoodcraftBySuman
2 жыл бұрын
Haha. I bet the adjustability on his is a little more finessed. But I’ll take a compliment when I can get it! 😁
@awildschuetz1
2 жыл бұрын
@@WoodcraftBySuman Have you considered drawing plans for some of these jigs and projects to make them available on a website for 💰or free? It's apparent that you have a talent for design and thoroughly plan out what you build in your videos. If you already draw your designs, you have a great opportunity to earn revenue and/or reach more people.
@WoodcraftBySuman
2 жыл бұрын
@@awildschuetz1 Thanks Aaron! Really appreciate the kind words. Eventually I'd like to get to a point where the effort of making plans to go with a video is worthwhile. The size of the channel is not there yet. Right now I'm focusing on growing the channel by developing skills in producing better videos. With the new baby and some life changes, it has been tough to dedicate time to KZitem. But my schedule is looking more optimistic and hopefully will be able to post videos more regularly.
@awildschuetz1
2 жыл бұрын
@@WoodcraftBySuman I completely understand that! I don't even have the time to set up a camera while I build, so hats off to you for what all you accomplish and the excellent production quality. Keep up the fantastic work! I always look forward to seeing new content from you.
@WoodcraftBySuman
2 жыл бұрын
@@awildschuetz1 you’ve been here from the start. Just want you to know how much I appreciate your positive vibe and encouragement!
@koalafan1576
2 жыл бұрын
Kind of stealing Woodpecker’s Thin Rip Guide, huh.
@WoodcraftBySuman
2 жыл бұрын
Plenty of folks make thin rip jig. Apparently woodpecker released theirs on the same day this vid came out? Lol
@zapa1pnt
2 жыл бұрын
Making a cut off, between the blade and the fence, is a good way, to have a dangerous kickback. In relation to safety, it's just plain stupid.
@WoodcraftBySuman
2 жыл бұрын
Depends on the width of the rip. I'd say 1/2" and wider are fine. Its the narrow stuff that'll get ya
@zapa1pnt
2 жыл бұрын
@@WoodcraftBySuman: Not so, friend. Check Stumpy Nubs, for a good explanation: kzitem.info/news/bejne/mZxuvIutrZOml4o
@WoodcraftBySuman
2 жыл бұрын
@@zapa1pnt Tablesaw kickback are very real. However, a Table sauce primary job is ripping material and cross cutting a secondary. Using appropriate precaution, a kickback can be greatly mitigated. Ripping super thin stocks between the blade and the fence is a great way to ensure a high probability of a kickback.
Пікірлер: 71