I love the fair that you move in your new house during your video, it makes you more dynamic and active
@AutomateYourLife
Ай бұрын
Yeah I'm having a little fun now
@garyhenderson9303
Ай бұрын
Wow this product can detect people better than the Secret Service. Also when you take it out of the box you can easily put it back in.
@AutomateYourLife
Ай бұрын
😂
@AutomateYourLife
Ай бұрын
😂😂😂
@xraargu6212
27 күн бұрын
Epic reply! 🤣😂
@DerfyStolt
29 күн бұрын
I like the tagline on your shirt. I also went outside once. I looked around, saw my shadow, and went back inside for six months. :-)
@AutomateYourLife
29 күн бұрын
That's the way to do it ;)
@Technology4Seniors
Ай бұрын
I have been using several FP2 devices for about a year with great results in room lighting control. However, over the last few months, I've been getting many ghost turn-ons and failure to turn off when no presence is detected with no change in room layout. I will give this a shot, as I had a terrible experience with the original FP1 devices that needed to be connected to China servers. Thanks for the coupon.
@AutomateYourLife
Ай бұрын
Good luck!!
@lowerleftside
Ай бұрын
The FP2 left me so underwhelmed and frustrated. Ghosting, multiple people in a space when only one person was, a person stuck in the space with no one there. This made it very hard to find a place to use it. Every space I wanted to use it in was a disaster for the reasons above. It’s now relegated to a hallway where it works as expected most of the time. I’m going to wait on this new model and see if it suffers problems.
@AutomateYourLife
Ай бұрын
It's the same frequency, but I didn't have the same problems with the FP2!
@supernova8962
28 күн бұрын
I purchased 3 of these FP2 and I also have the same problem... I decided to trash it. wasted $80 each
@bradkrekelberg8624
Ай бұрын
Yeah, you definitely don't need to sell me on presence sensors. It's just the FP2 is prohibitively expensive. This one is a bit better, at least. I ain't spendin' $75 for every room in my house!
@AutomateYourLife
Ай бұрын
Fair take, and this works plenty well for presence
@chrgeorgeson
Ай бұрын
You actually do need to be sold on it. The FP2 is a buggy terrible mess for many with phantom ghosting (false detections).
@Airbag888
Ай бұрын
I use a mix of tuya and Bluetooth ones as well as the excellent athom.. Much cheaper
@GabooN
Ай бұрын
@@chrgeorgesonmy FP2 had some initially, I marked a few interference zones or just deleted false bodies and now it seems to have learned and I don’t get phantoms. I imagine different furniture or electronics, etc may cause different experiences?
@chrgeorgeson
Ай бұрын
@@GabooN Yup. Myself and many, many, many others still have issues. Nearly my entire floor plan in one of my rooms is marked as an interference source. It still detects stuff in those zones that aren't there.
@HughD
Ай бұрын
Great review, Brian. I just ordered one using your link and your nice coupon code. I have the FP2 and don't need multi-person detection and need to work to try to improve its accuracy. I'm anxious to try this one out. For what it's worth, I use IFTTT writing to a Google Sheet whenever there's a change to get a good idea of what's happening over time. I do this for a number of devices.
@AutomateYourLife
Ай бұрын
I remember you'd struggled a bit with the FP1, so I hope this hits the mark for you sir!
@ricksherman34
Ай бұрын
Ecobee has an expandable network of temp sensors which allows you to program which rooms are occupied this in turn determines the algorithm to regulate the AC unit. So unused rooms are "ignored" in the overall calculation if they are unoccupied....
@AutomateYourLife
Ай бұрын
Those will be interesting to test out. Never looked at the tech behind them
@OsamaRaoPK
Ай бұрын
I have those. They work fairly well but they too can sometimes mark a room unoccupied even when someone is there.
@ricksherman34
Ай бұрын
@@OsamaRaoPK It depends on where you place them... I usually place them in shielded areas away from fans or external heat sources, like windows , electronics etc...
@philipperostin
Ай бұрын
I have 2 fp2 I still did not install ! What a lazy boomer 😂
@AlexManMe
Ай бұрын
came for the review, stayed for the tips to improve my FP2. Going to check out your FP2 video now. my main issue with the FP2 is if I hug my wife, sitting on the couch, then I break away and leave the room, the sensor will lose her and put her in darkness. Do you have any tips for that please?
@AutomateYourLife
Ай бұрын
😳 I do not... It must be seeing you as a single entity and then treating her as being an object (part of the couch) when it sees someone leave. Wild. Tell Aqara that one. Maybe one day they can fix it
@markloughtonUK
Ай бұрын
The FP2 is a chaperone. No heavy petting please ! We shall call it Uncle Buck 😂
@n0w0n70
Ай бұрын
Is the FP1E the same as the original FP1? If not, what are the differences ?
@AutomateYourLife
Ай бұрын
Never had it, but from what I understand...lots in terms of how well it works
@Tretabyte
Ай бұрын
it seems to be the exact same of FP1 but with compliance to be sold outside China
@n0w0n70
Ай бұрын
Thanks for the replies and discount code. I odered one will compare to my other 9 old FP1.
@kennymurphy4493
Ай бұрын
I have one of these coming tomorrow
@AutomateYourLife
Ай бұрын
Lucky duck! It's a good sensor!
@SeattleSandro
Ай бұрын
Brian, congrats on the new house! Also, love that shirt! I have the FP2 and I don't use it. It really doesn't work well for me. I had a hell of a time trying to get it set up in the Aqara app, so this ended up in my junk bin. This Zigbee version is what I had been waiting for.
@AutomateYourLife
Ай бұрын
It's a great combo of simplicity with function...and Zigbee!😃👍
@JoshsSmartHome
Ай бұрын
Great video as always Brian! Definitely going to look at picking up a couple!
@AutomateYourLife
Ай бұрын
Enjoy Josh! Thank you sir
@senil5906
Ай бұрын
Hello, I also need your help, please, I also bought a Tuya Zigbee Human Presence Sensor, it is placed in the room where I also have other lights, I would also like to know how I can set the light sensor in the tuya sensor to stop turning on the light bulb when I have the other lights in the same room on, how much lux should it be set to, I mention that I have the following options, < = >, I don't know which one I should choose, smaller, larger, or equal and what a lux to write there, I hope I made myself understood, excuse my English, thank you!
@AutomateYourLife
29 күн бұрын
I won't know the exact lux, but an easy way to tell us to look at the value of the sensor when you have the lights on to the level you want. Usually it's going to be Turn on light if Lux < X. 200-500 lumens is ok to start and then increase or decrease as you see fit
@Technology4Seniors
Ай бұрын
Very nice review and setup instructions. I have never seen an outlet 5' off the floor as you are showing. What was the original use of that?
@AutomateYourLife
Ай бұрын
TV!
@duboisad
Ай бұрын
So just confirming because I've seen conflicting info: Aqara zigbee devices still need an Aqara hub, right? i.e. I can't use them with my generic zigbee hub dongle on Home Assistant?
@AutomateYourLife
Ай бұрын
@@duboisad this one does, not all Aqara do
@g-rae4309
Ай бұрын
Great review as usual. Hope the move is coming along. I may use this in the garage since there is an outlet in the ceiling for the garage door opener. Now I can use my PIRs sensors in another area.
@AutomateYourLife
Ай бұрын
That's a really good idea and maybe something I will do too. It has a really good range in the ceiling mount configuration
@grahammarkway2874
20 күн бұрын
Brian, Big fan of channel and of automation in general. I just saw this video and wanted to pickup the fp1e but the code isn’t working? Has it expired by chance?TIA
@AutomateYourLife
20 күн бұрын
It likely has, sorry Graham!
@morells09
8 күн бұрын
How fast is it at turning on lights when you walk into a room?
@AutomateYourLife
8 күн бұрын
Under a second pretty regularly, but best to pair that with an Aqara light to do that.
@damnjustassignmeone
Ай бұрын
Wonder what it does when a cat is in the room
@AutomateYourLife
Ай бұрын
It purrs back!
@TH3xR34P3R
Ай бұрын
You don't need the Aqara Hub if you have a Home Assistant instance with a skyconnect setup in Zigbee mode and have the Matter server intergration setup for the network, throw in a GL-S200 or a secodary skyconnect in Thread mode and that covers those Matter over Thread devices, I have multiple Aqara P2 Window and Door sensors in my setup at this time paired directly to my HA instance. I may look at buying this sensor to replace my Aoetec Motion sensor I am using just for the way it works and to be able to just plug it into the USB power I already have through a useelink powerstrip.
@AutomateYourLife
Ай бұрын
I had the sky connect and didn't get it connected directly through Zigbee. I'm not sure why you're talking about matter over thread in this comment because this is a purely zigbee device.
@AutomateYourLife
Ай бұрын
My success with it doesn't mean that it can't happen and I'm sure at some point it will become available for use with home assistant if it isn't already
@TheHelicapt
25 күн бұрын
I also understand the M2 hub has matter ?
@AutomateYourLife
25 күн бұрын
Yep! It has the Matter Bridge feature, but it does not allow the other Matter products into Aqara's app. There's a difference.
@TheHelicapt
25 күн бұрын
@@AutomateYourLife now I wonder if my older original SmartThings hub will connect to the Aqara hub. FYI, I bought the m3 hub instead hoping it connects via matter bridge to my STH-ETH-200 SmartThings hub.
@chicagomike2111
Ай бұрын
Excellent video Brian.. If this sensor were used in a ceiling mount configuration, would you recommend the sensitivity be set to highest, or still bump it down like your wall mount? Also, do you know if it will work with Govee lighting products? Thanks..
@AutomateYourLife
Ай бұрын
@@chicagomike2111 yeahhhh so from what I saw, sensitivity wouldn't be necessary at full levels. Also, it's likely that animals will trigger the sensor more at those levels. So I'd dial it down on sensitivity but I didn't test that! Govee will work with Amazon, so I could do it that way. :)
@chicagomike2111
Ай бұрын
Awesome and its funny you mention pets. I want to do some routines for my Siberian Husky. With lights and fans.. amd if I ever get a robo-Vacuum, have it follow that shedding monster around..lol😂
@AutomateYourLife
Ай бұрын
Ahahahaha
@joesstlouis
Ай бұрын
Is that your shirt design? Love it!
@AutomateYourLife
Ай бұрын
I wish! Was given to me
@ronm6585
Ай бұрын
Thanks Brian.
@AutomateYourLife
Ай бұрын
Thank you sir!
@TheHelicapt
26 күн бұрын
Will this connect with SmartThings and Alexa.
@AutomateYourLife
26 күн бұрын
Check the integrations and automations section of the video :)
@TheHelicapt
26 күн бұрын
@@AutomateYourLife OK, saw that. Did you connect the Aqara Hub to Smartthings via Matter ? and then that made all the Aqara devices avail?
@MrTeeseeone
Ай бұрын
Which wireless light are you holding?
@AutomateYourLife
Ай бұрын
That is the Philips Hue Go lamp
@marissagoldsmith4347
Ай бұрын
I bought a bunch of Aqara stuff on prime day (including the presence sensor). One thing I'm trying to figure out - we have a wheelchair user in the house - is there gadget or something we can put on the wheelchair so we can detect that the user who is present is the wheelchair user - I'd like to have different a different automation when that person is present.
@AutomateYourLife
Ай бұрын
So...this is a complex automation thing. At the end of the video I talk about a series of 101 videos. That playlist has a couple of videos in it that deal with complex automations like this. Look at the hubs 101 video in that playlist. And watch for something called modes. Modes are what you want. Aqara doesn't really have the capability of doing this right now, but you can enable and disable automations based on a sensor. The sensor for knowing someone is in a wheelchair is going to be difficult and you're going to have to probably design something yourself. There's just nothing simple that will work unless they are willing to press a button
@jerseyman99
Ай бұрын
If you are using Home Assistant, look into the Bermuda integration and attach a smart tag to the wheelchair, I have just started using Bermuda, very early days for my set up but so far it is looking excellent.
@marissagoldsmith4347
Ай бұрын
@@jerseyman99 Thanks to both of you. I'm working my way up to Home Assistant, so I'll give that a try.I have a Samsun SmartThings tag on the chair already but that isn't room-to-room precise. I think I saw somewhere a Home Assistant integration to tell when a pet who had something on their collar went through a dog door, so I'll see if I can eventually work my way to that. In the meantime, I'll see if I can set it up so that we have presence and maybe some other indicator (like the wheelchair user's door is open). It's not the worst thing in the world if the automation goes off for someone other than the wheelchair user, jus not necessary.
@pawlos101
Ай бұрын
Hi, so if I get it right you can't set zones like in FP2? I have open kitchen and dont want the lights on when we are in livingroom. Only way to acomlish that is set distance in fp1e?
@AutomateYourLife
Ай бұрын
That's correct
@Eviltek2099
Ай бұрын
I run a one hundred percent Z wave network on a Home Assistant Pi I built. Can you please review a presence sensor that will work in that environment!
@AutomateYourLife
Ай бұрын
Sadly, I don't know of one
@LebDusty
Ай бұрын
i love my fp2 now i have to order the fp1E bro did you check the new google steaming device? it will be amazing
@AutomateYourLife
Ай бұрын
I'm hoping to test one!
@Beno951
Ай бұрын
Is Aqara hub usable as a substitute for Smartthings hub? A comparison video of these ecosystems would be great :) I'm still on a "hunt" for the ultimate hub. But I don't want HA because of the subscription they ask for remote access. What ecosystem is the best in terms of compatibility? (Besides HA)
@AutomateYourLife
Ай бұрын
I did a comparison of Homey and Smartthings recently, and am using Honey myself right now. Aqara is a good substitute to ST too, so I think you can look at both. But neither of those have compatibility as good as SmartThings does. Better reliability, but not compatibility. So if you're just looking to have a lot of options... Smart things is kind of second or third place to Amazon and HA
@garethjones5068
Ай бұрын
I only have an Aqara E1 hub, so I’m unsure if the FP1E would work with that or not
@AutomateYourLife
Ай бұрын
It will! I just wasn't sure about the Matter bridge with all Aqara hubs
@g-manm6181
Ай бұрын
Will this sensor show up on the echohub?
@AlexManMe
Ай бұрын
Hmmm 18 gbp less I was thinking of returning my fp2 I got on prime day for my bedroom, but it doesn't have a lux sensor?
@AutomateYourLife
Ай бұрын
@@AlexManMe no lux, true
@Biribirijr
Ай бұрын
Can you please try to connect the sensor to Hubitat C-8 via matter?
@AutomateYourLife
Ай бұрын
@@Biribirijr have they enabled matter yet??
@Biribirijr
Ай бұрын
@@AutomateYourLife yes. Also I have some thread matter devices (connected on HomePod) now running in my hubitat C-8 and they work great with hubitat automations.
@JoeyOsteShleven
Ай бұрын
Any idea how the AI calibration works when dealing with pets? I know you mentioned if false positives are popping up to re-run it, but I’m assuming I can’t have my cat or dog running around in the room during the calibration?
@AutomateYourLife
Ай бұрын
Yeah, I don't think you want a pet running around during calibration because that will confuse things. I think you could rerun it if your pet was sitting in their favorite place and that was causing present to be detected
@ScottHirschman
Ай бұрын
Does this work with Homey Pro?
@AutomateYourLife
Ай бұрын
Check the automation and integration segment, but there is a way
@user-tq3kl9sm4o
Ай бұрын
Is it compatible with Homey Pro?
@AutomateYourLife
Ай бұрын
@@user-tq3kl9sm4o that's in the automation section
@arne.munther
Ай бұрын
As there a presence sensor that can react to people but not cats or dogs ?
@AutomateYourLife
Ай бұрын
@@arne.munther this can be tuned that way, but I didn't get to fully test that
@arne.munther
Ай бұрын
@@AutomateYourLife I do have a few automations with motion sensors, that I need to turn off, when I am catsitting. One is on the kitchen, if I stand and cut up things, sometimes the sensors don't pick up movement :P
@c849243
Ай бұрын
Another video well done, Brian! Thank you again!
@AutomateYourLife
Ай бұрын
Thank you!
@meridiusuk8567
Ай бұрын
This sensor or the Everything Presence Lite Kit
@AutomateYourLife
Ай бұрын
I'm sure the everything presence lite is great but I haven't had a chance to test it. I also think it's very difficult for a single individual to keep up with the demands of the smart home industry so... That's how I would make my decision.
@cdarrigo
Ай бұрын
Does this mean it will or won't connect to my zigbee controller for home assistant?
@AutomateYourLife
Ай бұрын
I couldn't get it connected there. But I would never profess to have the deepest knowledge of all the methods of connecting to home assistant
@cdarrigo
Ай бұрын
@@AutomateYourLife if it's possible but takes advanced wizardry to get it done, I'm going to suggest that maybe it really isn't supported after all
@AutomateYourLife
Ай бұрын
That's my take too Chris!👍😃
@c849243
Ай бұрын
Liking the new place?
@AutomateYourLife
Ай бұрын
It's been great! Cannot ever complain about a home 😃
@CrazyAngelfire
Ай бұрын
codes for UK? those don't work
@AutomateYourLife
Ай бұрын
Sorry...I wasn't given any.
@sierpus
Ай бұрын
P1 works directly with zigbee usb stick in home assistant, doesn’t require aqara hub. If FP1E requires aqara hub, this is a big no for me But I wonder, how this might be matter certified if it works only with aqara hub?…
@AutomateYourLife
Ай бұрын
It's not matter certified, the Hub is matter certified as a matter bridge
@sierpus
Ай бұрын
@@AutomateYourLife thx. I'm not gonna buy aqara hub (even though I have a lot of aqara sensors including P1) so I will not buy this one..
@OntologicalQuandry
Ай бұрын
Matter just seems to be an excuse to be messy. I had wanted just this very sensor (indeed, to a prior video comment expressing that, you replied to me to watch for a future video and I think this is that video). Unfortunately, I don't want to have to buy an Aqara hub in order to integrate this sensor with SmartThings (as you indicate is necessary). The Aqara hub might be compelling if it has the IR blaster integrated, but then it would have to be equal in performance to the Logitech Harmony Hub that I use, otherwise it will be significantly less convenient. This just seems like such a waste. Functionally, it might provide much of what I want, but it requires me to buy what I don't and doesn't guarantee performance. It's all so vague.
@AutomateYourLife
Ай бұрын
Yeah that's OK :) Just trying to get some solutions for folks!
@OntologicalQuandry
Ай бұрын
@@AutomateYourLife Well, my reply hinged on the IR blaster function of the Aqara hub being an adequate replacement for Logitech... I see it might be competitive. You might devote a video to how...
@joejoe6949
Ай бұрын
I wish it was poe or usb c
@Kim-zb9zp
Ай бұрын
hub 😭😭😭😭😭😭😭😭😭😭 matter/thread has no added value if every platform still wants you to use their hub
@AutomateYourLife
Ай бұрын
I think we will see more products head that way, but this was a likely leftover from planning before they moved in that direction
@Kim-zb9zp
Ай бұрын
@@AutomateYourLifeor they want to keep you in their ecosystem so you buy more products from the same brand. There in no incentive to make it compatible with thread and matter.
@petertraugot6059
Ай бұрын
No battery option? Show stopper. For the height you need to mount this device, I'd have wires cascading down my walls all over the place. YUCK!!!!
@AutomateYourLife
Ай бұрын
You gotta look at that cable on this one, for sure
@dragonspirit82
Ай бұрын
Yup, since presence sensors are active sensors rather than passive they use a lot more power. You'd be changing the batteries constantly.
@petertraugot6059
Ай бұрын
Yeah, that’s a good point. But still, I just can’t drop lines all over the place.
@philipperostin
Ай бұрын
I have 2 fp2 I still did not install ! Lazy boomer 😂😂😂
@AutomateYourLife
Ай бұрын
@@philipperostin get to work man! 🤣
@g-manm6181
Ай бұрын
Will this sensor show up on The echohub?
@AutomateYourLife
Ай бұрын
I didn't get a look at that. Still don't have it setup in my home!
Пікірлер: 136