Thanks for the review, may i ask what specs laptop your suggestion
@stevesloan6775
2 ай бұрын
Is it me or is every word Ai?
@HoffmanEngineering
2 ай бұрын
No AI was used in any part of the process of making this video.
@thorsteneggert
3 ай бұрын
It would be nice to have some kind of test to check the accuracy. For example scan screws of different diameters and print them. Than test what is the smallest diameter which fits the corresponding nut.
@Todestelzer
3 ай бұрын
That wouldn’t be accurate. You need to measure points in the point cloud. If you print it you add the printer tolerance. The printer x/y calibration, Flow calibration, pressure advance calibration and material shrinkage. The accuracy of the scanner is listed as 0.02mm. In general that means around 0.05mm accuracy in real world scanning. You can use cloud compare to measure point cloud distances for example.
@salvador2390
2 ай бұрын
Came a long way from the kinect scans
@stevesloan6775
3 ай бұрын
The otter creates a more dense mesh if you use markers. Markers are a must have when scanning featureless frames. That’s the best advice I can give, right there! 🇦🇺🤜🏼🤛🏼🍀😎☮️☮️☮️
@jessiemmm
2 ай бұрын
great advice!!!
@stevesloan6775
3 ай бұрын
The otter and raptor are really an amazing contribution to so many fields of technology. Thank you so much Creality, I commend you for your tireless efforts to help progress humanity. I had a thought/ brainstorm, could you use a clear transparent base to locate the octopus on. That way you could scan right through the underside of the base, and create data without having to flip it over? Food for thought. Please keep making informative content on how to use the Creality scanners. 🇦🇺🤜🏼🤛🏼🍀😎☮️
@HoffmanEngineering
3 ай бұрын
I appreciate the comments! I agree, the Otter is a pretty good leap compared to similar handheld scanners of just a year or two ago. The transparent base is interesting. I'll have to see if I have anything that's transparent to infrared light. But if you can find a base like that, then I think that would work!
@stevesloan6775
3 ай бұрын
I think you’d freak out if you performed all of the same scans with the Creality Raptor hybrid blue laser- NIR scanner. The detail it can capture is mind blowing 🇦🇺🤜🏼🤛🏼🍀😎☮️
@HoffmanEngineering
3 ай бұрын
I've seen really good results with the Raptor. I hope to get the opportunity to test one out and see how it compares with the Otter.
@bjondersson
2 ай бұрын
Except that the Raptor NIR sucks compared to the Otter. But yes, for details and small objects the Raptor is superior.
@stevesloan6775
2 ай бұрын
@@bjondersson you need to take a larger scan. Everything there’s a marker, the actual polygon count is drastically changed.
@joatmon7347
3 ай бұрын
Thats a far way from using the xbox as a scanner. 😅 Cool!
@christianlainesse4281
3 ай бұрын
are the 3D scans size accurate, or do you still have to scale them after to the original size of the thing you scanned?
@HoffmanEngineering
3 ай бұрын
I don't know how I didn't mention it, but yes, items are scaled accurately on export.
@techr9186
3 ай бұрын
did you notice any difference/improvment from the last update?
@HoffmanEngineering
3 ай бұрын
I only did extensive testing on the one version shown in the video. As I was finishing editing there has been a new version of Creality Scan released, but I have not been able to put that new version to the test yet.
@Todestelzer
3 ай бұрын
They have to improve the software. No orthogonal view what it makes deleting stuff complicated and it’s deleting the original scans after merging. No alignment function to a coordinate system. No auto alignment using markers when fusing 2 body’s. (As far I know. There is no check mark to select for Auto alignment)
@HoffmanEngineering
3 ай бұрын
That is a good list of suggestions right there! The alignment workflow could definitely be approved, it was the only part where I struggled.
@alexmillette
3 ай бұрын
What about motocycle or car parts. I guess if it handle a full body, might be good for motocycle but not sure for a car.
@HoffmanEngineering
3 ай бұрын
With markers, I'd expect car and motorcycle parts to work pretty well. Creality has examples of a full car body on their website. You'd need to use a laptop for it, since you'd be moving around a large area.
@henninghoefer
3 ай бұрын
How does it compare to a Revopoint Mini?
@HoffmanEngineering
3 ай бұрын
Unfortunately I have not had the chance to try the Revopoint Mini. I'll try and get my hands on one though to test out. The Otter gives better results than the Revopoint Pop2 I last used, but that is a few years older and less expensive, so not really a fair comparison.
Пікірлер: 25